Global LCD Panel Exchange Center www.panelook.

com

PRODUCT INFORMATION

ISSUED DATE : 2011-02-09

SAMSUNG TFT-
TFT-LCD PRODUCT INFORMATION

MODEL : LTM230HT09

Note : This is Product Information is subject to change after 3 months of issuing date.

Application Engineering Group

LCD Division, Samsung Electronics Co. , LTD.

MODEL LTM230HT09 Page 1/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

Contents

General Description --------------------------------------------------------------------------------- (3)

1. Absolute Maximum Ratings ------------------------------------------------------------------- (4)

2. Optical Characteristics -------------------------------------------------------------------------- (6)

3 El
3. Electrical
t i l Ch
Characteristics
t i ti ------------------------------------------------------------------------(11)
(11)
3.1 TFT LCD Module
3.2 Back Light Unit

4. Block Diagram ----------------------------------------------------------------------------------- (15)

4.1 TFT LCD Module
4 2 Back Light Unit
4.2

5. Input Terminal Pin Assignment -------------------------------------------------------------- (16)

5.1 Input Signal & Power
5.2 LVDS Interface
5.3 Back Light Unit
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. Interface Timing --------------------------------------------------------------------------------- (25)

6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
6.4 VDD Power Dip Condition

7. Outline Dimension ------------------------------------------------------------------------------- (29)

8. General Precaution ------------------------------------------------------------------------------ (31)

8.1 Handling
8.2 Storage
83O
8.3 Operation
ti
8.4 Operation Condition Guide
8.5 Others

MODEL LTM230HT09 Page 2/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

General Description PRODUCT INFORMATION

Description
q
LTM230HT09 is a color active matrix liquid crystal
y display
p y ((LCD)) that uses amorphous
p
silicon TFT (Thin Film Transistor) as switching components. This model is composed of
a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 23.0” is 1920
x 1080 and this model can display up to 16.7 millions colors.

Features
ƒ High contrast ratio, high aperture structure
ƒ High speed response
ƒ FHD (1920 x 1080 pixels) resolution
ƒ White LED Edge slim Backlight (Vertical)
ƒ DE (Data Enable) only mode
ƒ LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
ƒ RoHS, Halogen Free
ƒ TCO 03’ compliance

Applications
ƒ Workstation & desktop monitors
ƒ Display terminals for AV application products
ƒ Monitors for industrial machine
* If the module is used to other applications besides the above, please contact SEC
in advance.

General Information
Items Specification Unit Note
Pixel Pitch 0.2655(H) x 0.2655(W) mm
Active Display Area 509.76(H) x 286.74(V) mm
Surface Treatment Haze 25%
25%, Hard coating (3H)
Display Colors 16.7M (Hi-FRC) colors
Number of Pixels 1,920 x 1,080 pixel
Pixel Arrangement RGB vertical stripe
Display Mode Normally White
Luminance of White 250(Typ.) cd/༇

MODEL LTM230HT09 Page 3/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
Mechanical Information

Item Min. Typ.

yp Max. Unit Note

Horizontal (H) 533.5 534.0 534.5 mm

Module -
Vertical (V) 311.2 311.7 312.2 mm
size
Depth (D) 9.7 10.2 10.7 mm

Weight - - 1,750 g LCD module only

Note (1) Mechanical tolerance is · 0.5mm unless there is a special comment.

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable

damage to the device.

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.5 6.5 V (1)

Data Signal Vsig - 5 V

Storage temperature TSTG -25 60 ୅ (2)

Center of Glass surface temperature
TOPR 0 50 ୅ (2)
(Operation)
Shock ( non - operating ) Snop - 50 G (3)(5)

Vibration ( non - operating ) Vnop - 1.5 G (4)(5)

Note (1) Ta= 25 · 2 ¶C

MODEL LTM230HT09 Page 4/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta  39 ¶C)
b Maximum wet-bulb temperature at 39 ¶C
b. less (Ta  39 ¶C)
C or less. C)
c. No condensation
(3) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
(5) At vibration and shock test, the fixture which holds the module to be tested has to be
hard and rigid enough so that the module would not be twisted or bent by the fixture.

(39,90)

(50,50.4)

(60,27.7)

(-25,5)

Fig. Temperature and Relative humidity range

MODEL LTM230HT09 Page 5/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

2. Optical Characteristics PRODUCT INFORMATION

The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : SR-3, RD-80S (TOPCON), EZ-Contrast (Eldim)

(Ta = 25 · 2¶C, VDD=5V, fv= 60Hz, fDCLK=67.3MHz, If =324mA)

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio (3)

C/R 600 1,000 -
(Center of screen) SR-3

(5)
Response Time(On/Off) Tr + Tf - 5 8 msec
RD-80S

Luminance of White (6)

YL 200 250 - cd/m2
(Center of screen) SR-3

R
Rx 0 640
0.640
Red
Ry 0.338

Gx 0.320
Green
Color Gy 0.620
Chromaticityy -0.030 +0.030
(CIE 1931) Bx 0.153
Blue Normal
By L,R=0 0.045
U,D=0
Wx 0.313
White Viewing (7),(8)
Wy Angle 0.329
SR-3
Ru' - 0.443 -
Red
Rv' - 0.527 -

Gu' - 0.131 -
Color Green
Chromaticity Gv' - 0.569 -
(CIE 1976) B '
Bu' - 0 185
0.185 -
Blue
Bv' - 0.125 -

Wu' - 0.198 -
White
Wv' - 0.468 -

C.G.L
White Ƹu'v'
Ƹu v - - 0 02
0.02 (9)
(ACC ONLY)

* C.G.L : Color Grayscale Linearity

MODEL LTM230HT09 Page 6/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

Item Symbol Condition Min. Typ. Max. Unit Note

Color Gamut - - 72 - %

Color Temperature - - 6500 - K

L 70 80 -
Hor.
R 70 80 - (8)
Viewing
Vi i
CR10 Degrees EZ-
Angle U 70 80 - Contrast
Ver.
D 70 80 -

Brightness Uniformity (4)

Buni - - 25 %
(9 Points) SR-3

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
30min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

LED Forward current : If = 63 mA Environment condition : Ta = 25 · 2 ¶C

C

Photo detector
Photo detector Field

SR-3 2ദ
Field

SR-3 : 40໅
RD-80S : 50໅

TFT - LCD Module

LCD Panel

The center of the screen

MODEL LTM230HT09 Page 7/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
Note (2) Definition of test point

192 960 1728

Active Area
9 8 7 108

6 5 4 540

3 2 1
972
: Test Point

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point䐣 of the panel

G max
CR
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

Note (4) Definition of 9 points brightness uniformity

( B max  B min)
Buni 100 u
B max
Bmax : Maximum brightness
Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display Data White(TFT off) Black(TFT on) White(TFT off)

Optical Instruments 100%

Response
90%

10%
0%

MODEL LTM230HT09 Page 8/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
Note (6) Definition of Luminance of White : Luminance of white at center point䐣

Note (7) Definition of Color Chromaticity (CIE 1931, CIE1976)

Color coordinate of Red, Green, Blue & White at center point䐣

Note (8) Definition of Viewing Angle

: Viewing angle range (CR  10)

MODEL LTM230HT09 Page 9/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
Note (9) Color Grayscale Linearity
a. Test image : 100% full white pattern with a test pattern as below
b. Test pattern : Squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and
105 grays steps should be arranged at the centerྜྷ of the screen.

c. Test method
1st gray step : move a square of 255 gray level should be moved into the center of the
-1
screen and measure luminance and u’ and v’ coordinates.
- Next gray step : Move a 225 gray square into the center and measure both
luminance and coordinates, too.
d. Test evaluation

'u' v' = (u' A - u' B) 2 + (v' A - v' B) 2

Where A, B : 2 gray levels found to have the largest color differences between them
i.e. get the largest u’ and v’ of each 6 pair of u’ and v’ and calculate the u’v’.

MODEL LTM230HT09 Page 10/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

3. Electrical Characteristics PRODUCT INFORMATION

3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Ta = 25¶C

Item Symbol Min. Typ. Max. Unit Note

Voltage of Power Supply VDD 4.5 5.0 5.5 V (1)

Differential Input High - - +100 mV (2)

V lt
Voltage for
f LVDS
Receiver Threshold Low -100 - - mV

LVDS skew tSKEW -300 300 (3)

LVDS
Input Differential input
|VID| 200 600 mV (4)
Characteri o tage
voltage
stics

(a) Black - 1,200 - mA

Current of
Power (b) White IDD - 700 - mA (5),(6)
Supply

(c) Dot - 1,400 2,000 mA

Vsync Frequency fV 49 60 76 Hz

Hsync Frequency fH 54.2 66.0 83.8 kHz

Main Frequency fDCLK 53.4 67.3 83.0 MHz

Rush Current IRUSH - - 5.0 A (7)

Note (1) The ripple voltage should be controlled under 10% of VDD.

MODEL LTM230HT09 Page 11/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
(2) Differential receiver voltage definitions and propagation delay and transition time test circuit
a. All input pulses have frequency = 10MHz, tR or tF=1ns
b. CL includes all probe and fixture capacitance

Note a.

Note b.

(3) LVDS Receiver DC parameters are measured under static and steady conditions
which may not be reflective of its performance in the end application.

LVDS Clk VDIFF= 0V VDIFF= 0V Differential

LVDS Data Differential

RX +/-
tSKEW

where tskew : skew between LVDS clock & LVDS data,

T : 1 period time of LVDS clock
cf) (-/+) of 300psec means LVDS data goes before or after LVDS clock.

(4) Definition of VID and VCM using single-end signals

MODEL LTM230HT09 Page 12/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

((5)) fV=60Hz,, fDCLK = 67.3MHz,, VDD = 5.0V,, DC Current.

(6) Power dissipation check pattern (LCD Module only)

a) Black Pattern b) White Pattern c) Dot Pattern

(7) Measurement Condition

VDD
100%
90%

10%
GND

TRUSH=470༕
Rush Current IRUSH can be measured when TRUSH. is 470༕
470༕.

MODEL LTM230HT09 Page 13/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
3.2 Back Light Unit
3.2.1 The characteristics of LED bar

The back light unit is composed of WLED.

Ta=25 · 2¶C

Item Symbol Min. Typ. Max. Unit Note

LED Forward Current IF - 324 330 mA -
LED Array Voltage VP - 44.2 46.8 V -
Operating Life Time Hr 30,000 - - Hour (2)

Note (1) The above specification is not for the converter output, but for the LED bar.
The LED bar consists of 39 LED packages ; 3parallel X 13 serial
(2) Life time (Hr) is defined as the time when brightness of a LED package itself
becomes 50% or less than its original value at the condition of Ta=25 · 2¶C
and IF =324mA.

MODEL LTM230HT09 Page 14/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

4. BLOCK DIAGRAM PRODUCT INFORMATION

4.1 TFT LCD Module

RSDS

Control signal Source Driver ICs

LVDS S1 S1600
pair #1 Control signal
RSDS(Tx)
LVDS (Rxx)

Column Driver Circuit

LVDS
pair #2

CN1
(30pin) TFT-LCD
(1920 x RGB x 1080 pixels)
Timing Controller
+5.0V
VDD Power
Circuit

4.2 Back Light

g Unit
Connector: Molex 104088-0410
(mating CNT : Molex 104085-0400,)
LED bar

LED Return
n
LED Powerr

signal

LED Power
4-pin connector
LED Return
signal
୔ For detail connector information, please refer to page 25.

MODEL LTM230HT09 Page 15/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5. Input Terminal Pin Assignment

5.1. Input Signal & Power (Connector : P-TWO196308-30041 or equivalent )

PIN NO SYMBOL FUNCTION

1 RXO0N Negative LVDS differential data output
2 RXO0P Positive LVDS differential data output
3 RXO1N Negative LVDS differential data output
4 RXO1P Positive LVDS differential data output
5 RXO2N Negative LVDS differential data output
6 RXO2P Positive LVDS differential data output
7 GND Ground
8 RXOC- Negative Sampling Clock (ODD data)
9 RXOC+ Positive Sampling Clock (ODD data)
10 RXO3N N
Negative
ti LVDS diff
differential
ti l d
data
t output
t t
11 RXO3P Positive LVDS differential data output
12 RXE0N Negative LVDS differential data output
13 RXE0P Positive LVDS differential data output
14 GND Ground
15 RXE1N Negative LVDS differential data output
16 RXE1P Positive LVDS differential data output
17 GND Ground
18 RXE2N Negative LVDS differential data output
19 RXE2P Positive LVDS differential data output
20 RXEC- Negative Sampling Clock (EVEN data)
21 RXEC+ Positive Sampling Clock (EVEN data)
22 RXE3N Negative LVDS differential data output
23 RXE3P Positive LVDS differential data output
24 GND Ground
25 NC * CE (For LCD internal use only. Do not connect)
26 NC * CTL (For LCD internal use only. Do not connect)
27 NC No Connection
28 VDD
29 VDD Power Supply : +5V
30 VDD

* If the system already uses the 25, 26pins, it should keep under GND level
The voltage applied to those pins should not exceed -200mV.

MODEL LTM230HT09 Page 16/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

Note) Pin number starts from Left side

PCB
̷

Pin No. 1 Pin No. 30

̷
#1 #30

UJU IS100-L30B-C23-S or equivalent

#1 #30

Fig. Connector diagram

a. All GND pins

i should
h ld b be connected
t d ttogether
th and
d also
l b be connected
t d
to the LCD’s metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.

MODEL LTM230HT09 Page 17/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5.2 LVDS Interface (1)
5.2.1 Odd Pixel Data (1st pixel data)
LVDS Transmitter ( DS90C383, DS90C385 ) Signal Interface
To LTM230HT09
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
51 TXIN0 RO0 Red Odd Pixel Data (LSB)
52 TXIN1 RO1 Red Odd Pixel Data
TXOUT0- No. 1 RXO0-
54 TXIN2 RO2 Red Odd Pixel Data
TXOUT0+ No. 2 RXO0+
55 TXIN3 RO3 Red Odd Pixel Data
56 TXIN4 RO4 Red Odd Pixel Data
TXOUT3- No. 10
No RXO3-
2 TXIN5 RO7 Red Odd Pixel Data (MSB)
TXOUT3+ No. 11 RXO3+
3 TXIN6 RO5 Red Odd Pixel Data TXOUT0- No. 1 RXO0-
4 TXIN7 GO0 Green Odd Pixel Data (LSB) TXOUT0+ No. 2 RXO0+

6 TXIN8 GO1 Green Odd Pixel Data TXOUT1- No. 3 RXO1-

7 TXIN9 GO2 Green Odd Pixel Data TXOUT1+ No. 4 RXO1+

8 TXIN10 GO6 Green Odd Pixel Data TXOUT3- No. 10 RXO3-

10 TXIN11 GO7 Green Odd Pixel Data (MSB) TXOUT3+ No. 11 RXO3+

11 TXIN12 GO3 Green Odd Pixel Data

12 TXIN13 GO4 Green Odd Pixel Data TXOUT1- No. 3 RXO1-
1
14 TXIN14
1 GO
GO5 G
Green Odd
O Pixel Data TXOUT1+ No 4
No. RXO1+

15 TXIN15 BO0 Blue Odd Pixel Data (LSB)

16 TXIN16 BO6 Blue Odd Pixel Data TXOUT3- No. 10 RXO3-
18 TXIN17 BO7 Blue Odd Pixel Data (MSB) TXOUT3+ No. 11 RXO3+

TXOUT1- No. 3 RXO1-

19 TXIN18 BO1 Blue Odd Pixel Data
TXOUT1+
TXOUT1 N 4
No. RXO1+
RXO1
20 TXIN19 BO2 Blue Odd Pixel Data
22 TXIN20 BO3 Blue Odd Pixel Data TXOUT2- No. 5 RXO2-
23 TXIN21 BO4 Blue Odd Pixel Data TXOUT2+ No. 6 RXO2+

24 TXIN22 BO5 Blue Odd Pixel Data

TXOUT3- No. 10 RXO3-
50 TXIN27 RO6 Red Odd Pixel Data
TXOUT3+ No. 11 RXO3+

MODEL LTM230HT09 Page 18/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5.2.2 Even Pixel Data (2nd pixel data)
LVDS Transmitter ( DS90C383, DS90C385 ) Signal Interface

To LTM230HT09
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
51 TXIN0 RE0 Red Even Pixel Data (LSB)
52 TXIN1 RE1 Red Even Pixel Data
TXOUT0- No. 12 RXE0-
54 TXIN2 RE2 Red Even Pixel Data
TXOUT0+ No. 13 RXE0+
55 TXIN3 RE3 Red Even Pixel Data
56 TXIN4 RE4 Red Even Pixel Data
TXOUT3- No. 22 RXE3-
2 TXIN5 RE7 Red Even Pixel Data ((MSB))
TXOUT3+ N 23
No. RXE3+

3 TXIN6 RE5 Red Even Pixel Data TXOUT0- No. 12 RXE0-

4 TXIN7 GE0 Green Even Pixel Data (LSB) TXOUT0+ No. 13 RXE0+

6 TXIN8 GE1 Green Even Pixel Data TXOUT1- No. 15 RXE1-

7 TXIN9 GE2 Green Even Pixel Data TXOUT1+ No. 16 RXE1+

8 TXIN10 GE6 Green Even Pixel Data TXOUT3- No. 22 RXE3-

10 TXIN11 GE7 Green Even Pixel Data (MSB) TXOUT3+ No. 23 RXE3+

11 TXIN12 GE3 Green Even Pixel Data

12 TXIN13 GE4 Green Even Pixel Data TXOUT1- No. 15 RXE1-
14 TXIN14 GE5 Green Even Pixel Data TXOUT1
TXOUT1+ No. 16 RXE1
RXE1+

15 TXIN15 BE0 Blue Even Pixel Data (LSB)

16 TXIN16 BE6 Blue Even Pixel Data TXOUT3- No. 22 RXE3-
18 TXIN17 BE7 Blue Even Pixel Data (MSB) TXOUT3+ No. 23 RXE3+

TXOUT1- No. 15 RXE1-

19 TXIN18 BE1 Blue Even Pixel Data
TXOUT1+ No 16
No. RXE1+

20 TXIN19 BE2 Blue Even Pixel Data

22 TXIN20 BE3 Blue Even Pixel Data TXOUT2- No. 18 RXE2-
23 TXIN21 BE4 Blue Even Pixel Data TXOUT2+ No. 19 RXE2+

24 TXIN22 BE5 Blue Even Pixel Data

TXOUT3- No. 22 RXE3-

50 TXIN27 RE6 Red Even Pixel Data
TXOUT3+ No. 23 RXE3+

MODEL LTM230HT09 Page 19/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5.2 LVDS Interface (2)
5.2.3 Odd Pixel Data (1st pixel data)

LVDS Transmitter ( DS90C387 ) Signal Interface

To LTM230HT09
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
10 R10 RO0 Red Odd Pixel Data (LSB)
( )
9 R11 RO1 Red Odd Pixel Data
A0M No. 1 RXO0-
8 R12 RO2 Red Odd Pixel Data
A0P No. 2 RXO0+
7 R13 RO3 Red Odd Pixel Data
6 R14 RO4 Red Odd Pixel Data
A3M No. 10
No RXO3
RXO3-
3 R17 RO7 Red Odd Pixel Data (MSB)
A3P No. 11 RXO3+
5 R15 RO5 Red Odd Pixel Data A0M No. 1 RXO0-
2 G10 GO0 Green Odd Pixel Data (LSB) A0P No. 2 RXO0+

1 G11 GO1 Green Odd Pixel Data A1M No. 3 RXO1-

100 G12 GO2 Green Odd Pixel Data A1P No. 4 RXO1+

94 G16 GO6 Green Odd Pixel Data A3M No. 10 RXO3-

93 G17 GO7 Green Odd Pixel Data (MSB) A3P No. 11 RXO3+

99 G13 GO3 Green Odd Pixel Data

96 G14 GO4 Green Odd Pixel Data A1M No. 3 RXO1-
95 G15 GO5 Green Odd Pixel Data A1P No 4
No. RXO1+

92 B10 BO0 Blue Odd Pixel Data (LSB)

86 B16 BO6 Blue Odd Pixel Data A3M No. 10 RXO3-
85 B17 BO7 Blue Odd Pixel Data (MSB) A3P No. 11 RXO3+

A1M No. 3 RXO1-

91 B11 BO1 Blue Odd Pixel Data
A1P No. 4 RXO1+
90 B12 BO2 Blue Odd Pixel Data
89 B13 BO3 Blue Odd Pixel Data A2M No. 5 RXO2-
88 B14 BO4 Blue Odd Pixel Data A2P No. 6 RXO2+

87 B15 BO5 Blue Odd Pixel Data

A3M No. 10 RXO3-
4 R16 RO6 Red Odd Pixel Data
A3P No. 11 RXO3+

MODEL LTM230HT09 Page 20/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5.2.4 Even Pixel Data (2nd pixel data)

LVDS Transmitter ( DS90C387 ) Signal Interface

To LTM230HT09
Device Input Pin Device Input Signal Output Interface ( CN1 )
Signal
No Symbol Symbol Function Terminal Symbol
84 R20 RE0 Red Even Pixel Data (LSB)
81 R21 RE1 Red Even Pixel Data
A4M No. 12 RXE0-
80 R22 RE2 Red Even Pixel Data
A4P No. 13 RXE0+
79 R23 RE3 Red Even Pixel Data
78 R24 RE4 Red Even Pixel Data

A7M No. 22 RXE3-

75 R27 RE7 Red Even Pixel Data ((MSB))
A7P No 23
No. RXE3+

77 R25 RE5 Red Even Pixel Data A4M No. 12 RXE0-

74 G20 GE0 Green Even Pixel Data (LSB) A4P No. 13 RXE0+

73 G21 GE1 Green Even Pixel Data A5M No. 15 RXE1-

72 G22 GE2 Green Even Pixel Data A5P No. 16 RXE1+

66 G26 GE6 Green Even Pixel Data A7M No. 22 RXE3-

65 G27 GE7 Green Even Pixel Data (MSB) A7P No. 23 RXE3+

71 G23 GE3 Green Even Pixel Data

70 G24 GE4 Green Even Pixel Data A5M No. 15 RXE1-
69 G25 GE5 Green Even Pixel Data A5P No. 16 RXE1+

64 B20 BE0 Blue Even Pixel Data (LSB)

58 B26 BE6 Blue Even Pixel Data A7M No. 22 RXE3-
57 B27 BE7 Blue Even Pixel Data (MSB) A7P No. 23 RXE3+

A5M No. 15 RXE1-

63 B21 BE1 Blue Even Pixel Data
A5P No 16
No. RXE1+

62 B22 BE2 Blue Even Pixel Data

61 B23 BE3 Blue Even Pixel Data A6M No. 18 RXE2-
60 B24 BE4 Blue Even Pixel Data A6P No. 19 RXE2+

59 B25 BE5 Blue Even Pixel Data

A7M No. 22 RXE3-

76 R26 RE6 Red Even Pixel Data
A7P No. 23 RXE3+

MODEL LTM230HT09 Page 21/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5.2.5 Timing Diagrams of LVDS For Transmitting
LVDS Receiver : Integrated T-CON

MODEL LTM230HT09 Page 22/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

5.3 Back Light Unit

LED Bar input
p connector : Molex 104088-0410
(mating CNT : Molex 104085-0400)

Pin No. Pin description Function

1 Vin LED power input
2 RTN 1 Channel 1 LED return
3 RTN 2 Channel 2 LED return
4 RTN 3 Channel 3 LED return

Note ) Pin number starts from Left side

Rear view of panel

̷
#4 #1
Connector

Fig. Connector diagram

MODEL LTM230HT09 Page 23/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY
DISPLAY RED GREEN BLUE
COLOR SCALE
(8bit)
LEVEL
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

CYAN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BASIC
COLOR RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY 
SCALE : : : : : : : : : : : : : : : : : : R3~
OF : : : : : : : : : : : : : : : : : : R252
RED 
LIGHT 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R253

0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R254

RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R255

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

DARK 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY 
SCALE : : : : : : : : : : : : : : : : : : G3~
OF : : : : : : : : : : : : : : : : : : G252
GREEN 
LIGHT 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G253

0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G254

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G255

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 B1

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 B2
GRAY 
SCALE : : : : : : : : : : : : : : : : : : B3~
OF : : : : : : : : : : : : : : : : : : B252
BLUE 
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 B253

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 B254

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 B255

Note (1) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LTM230HT09 Page 24/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
6. Interface Timing
6.1 Timing Parameters ( DE only mode )

SIGNAL ITEM SYMBOL MIN

MIN. TYP
TYP. MAX
MAX. Unit NOTE
Clock 1/TC 56.4 67.3 86.0 MHz -
Hsync Frequency FH 54.2 66.0 83.8 kHz -
Vsync FV 49 60 75 Hz -
Active
Vertical Display TVD 1080 1080 1080 Lines -
Display Term Period
Vertical Total TV 1105 1111 1118 Lines -
Active
2pixel/
Display THD 960 960 960 Clocks
Horizontal clock
Period
Display Term
Horizontal 2pixel/
TH 990 1010 1040 clocks
Total clock

Note (1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal Vcc = 5.0V
(3) While operation, DE signal should be have the same cycle.
(4) Main frequency Max is 86MHz without spread spectrum.

MODEL LTM230HT09 Page 25/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
6.2 Timing diagrams of interface signal ( DE only mode )
TV

TVD TVB

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

TC
TCH TCL

DCLK 0.5
VCC

TDS TDH

DISPLAY 0.5
DATA
VCC

TES

DE 0.5
VCC

MODEL LTM230HT09 Page 26/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
6.3 Power ON/OFF Sequence

To prevent a latch
latch-up
up or DC operation of the LCD Module
Module, the power on/off
sequence should be as the diagram below.

300༕T110msec
0T250msec
0T350msec
1secT4

Back-Light
(Recommended)
500msecT5
100msecT6

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.

ƒ The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
ƒ Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
ƒ In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
ƒ T4 should be measured after the Module has been fully discharged between power off
and on pperiod.
ƒ Interface signal should not be kept at high impedance when the power is on.

MODEL LTM230HT09 Page 27/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION
6.4 VDD Power Dip Condition

VDD Td

90%

80% VCC

GND

4.5V  VDD  5.5V

If VDD(typ.) x 80%  VCC  VDD(typ) x 90%
Then, 0<Td 20msec

Note (1) The above conditions are for the glitch of the input voltage.
(2) For stable operation of an LCD Module power, please follow them.
i.e., if typ VDD x 80%  Vcc  typ VDD x 90%, then Td should be less than 20ms.

MODEL LTM230HT09 Page 28/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

7. Outline Dimension PRODUCT INFORMATION

[ Refer to the next page ]

MODEL LTM230HT09 Page 29/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

8. General Precautions PRODUCT INFORMATION

8.1 Handling

(a) When the module is assembled

assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the module.

(b) Refrain from strong mechanical shock and / or any force to the module.
In addition to damage, it may cause improper operation or damage to the module
and LED back light.

(c) Note that polarizer films are very fragile and could be damaged easily.
Do not press or scratch the surface harder than a HB pencil lead.

(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(e) If the surface of the polarizer is dirty

dirty, clean it using absorbent cotton or soft cloth
cloth.

(f) Desirable cleaners are water, IPA (Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might cause permanent damage to the polarizer due to chemical
reaction.

(g) If the liquid crystal material leaks from the panel

panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(h) Protect the Module from static, or the CMOS Gate Array IC would be damaged.

(i) Use finger-stalls with soft gloves in order to keep display clean during the
i
incoming
i iinspection
ti and d assembly
bl process.

(j) Do not disassemble the Module.

(k) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized.

(l) Pins of I/F connector should not be touched directly with bare hands.

MODEL LTM230HT09 Page 31/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

8.2 Storage

(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35୅
and relative humidity of less than 70%.

(b) Do not store the TFT-LCD Module in direct sunlight.

(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.

8.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the item 6.3
"Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
i t f
interference should
h ld bbe d
done b
by system
t manufacturers.
f t G
Grounding
di and d shielding
hi ldi
methods may be important to minimize the interference.

(d) The cable between the back light connector and its converter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the convertor may cause lower luminance of LED

8.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20·15୅
- Humidity : 65·20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

MODEL LTM230HT09 Page 32/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT INFORMATION

8.5 Others

( ) Ul
(a) Ultra-violet
i l ray fil
filter iis necessary ffor outdoor
d operation.
i

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation
variation, variation in part contents and environmental temperature
temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be “stuck" to the screen.
To avoid image sticking
sticking, it is recommended to use a screen saver
saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LTM230HT09 Page 33/33

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com