0% found this document useful (0 votes)
2 views

Arduino Code temperatur

The document discusses a circuit diagram for a temperature sensor and includes Arduino code for a car parking system and another project. It features code snippets for setting up the system with LCD and servo components, as well as handling input from infrared sensors. The document also references additional posts related to Arduino projects.
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2 views

Arduino Code temperatur

The document discusses a circuit diagram for a temperature sensor and includes Arduino code for a car parking system and another project. It features code snippets for setting up the system with LCD and servo components, as well as handling input from infrared sensors. The document also references additional posts related to Arduino projects.
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Circuit Diagram Temperature Sensor

- February 26, 2024

Comments

Popular posts from this blog

Arduino Code Car Parking System

- March 07, 2024

// Created by Simple Circuits #include <Wire.h> #include <LiquidCrystal_I2C.h> LiquidCrystal_I2C


lcd(0x27,16,2); #include <Servo.h> Servo myservo; int IR1 = 2; int IR2 = 3; int Slot = 4; //Total
number of parking Slots int flag1 = 0; int flag2 = 0; void setup() { Serial.begin(9600); lcd.init();
//initialize the lcd lcd.backlight(); //open the backlight pinMode(IR1, INPUT); pinMode(IR2,
INPUT); myservo.attach(4); myservo.write(100); lcd.setCursor (0,0); lcd.print(" ARDUINO ");
lcd.setCursor (0,1); lcd.print(" PARKING SYSTEM "); delay (2000); lcd.clear(); } void loop(){
if(digitalRead (IR1) == LOW && flag1==0){ if(Slot>0){flag1=1; if(flag2==0){myservo.write(0); Slot =
Slot-1;} }else{ lcd.setCursor (0,0); lcd.print(" SORRY :( "); lc...

Read more

Arduino Code

- February 16, 2024

//define Pins #include <Servo.h> Servo servo; int trigPin = 11; int echoPin = 12; // defines variables
long duration; int distance; void setup() { servo.attach(13); servo.write(180); delay(2000); //
Sets the trigPin as an Output pinMode(trigPin, OUTPUT); // Sets the echoPin as an Input
pinMode(echoPin, INPUT); } void loop() { // Clears the trigPin digitalWrite(trigPin, LOW);
delayMicroseconds(2); // Sets the trigPin on HIGH state for 10 micro seconds digitalWrite(trigPin,
HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); // Reads the echoPin, returns the sound
wave travel time in microseconds duration = pulseIn(echoPin, HIGH); // Calculating the distance
distance= duration*0.034/2; // Prints the distance on the Serial Monitor Serial.print("Distance: ");
Serial.println(distance); if ( distance <= 25 ) // Change Distance according to Ultrasonic Sensor
Placement { servo.write(180); delay(3000); ...

Read more

Circuit Diagram

- February 16, 2024

Read more

Powered by Blogger

Theme images by Dizzo

You might also like