How To Recognize Different Variations of Mosin Nagant Rifles
How To Recognize Different Variations of Mosin Nagant Rifles
How To Recognize Different Variations of Mosin Nagant Rifles
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Russian M91 ries are 51 1/2" long, dated 1893-1925, and have the following features. The rst picture is early conguration and the second picture is late conguration.
1 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Hex Receiver
Curved rear sight Blade front sight M91s were manufactured by three Russian and three "foreign" arsenals. While exact logos vary through the years, the following marks are typical.
Chatellerault (French)
Tula (Russian)
Izhevsk (Russian)
Sestroryetsk (Russian)
Russian Dragoon and Cossack ries are 48 1/2" long, dated 1893-1932, and have the same features as shown above for the M91. They were only made at Izhevsk and Tula. The rst picture is early conguration and the second picture is late conguration.
2 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Soviet M91/30 ries are 48 1/2" long, dated 1930-1944, and have the following features:
Flat rear sight Globe front sight M91/30s can have a hex or round receiver and were manufactured at Tula and Izhevsk. The following marks are typical:
Soviet M38 carbines are 40" long, dated 1939-1945, and have the following features:
Short rear sight leaf M38s were manufactured at Tula and Izhevsk. The following marks are typical:
3 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Izhevsk M38 Soviet M44 carbines are 40 1/2" long, dated 1943-1948, and have the following feature:
Tula M38
Side folding bayonet M44s were manufactured at Tula and Izhevsk. The following marks are typical:
Izhevsk M44
Tula M44
Soviet M91/59 carbines are 40 1/2" long, cut down from M91/30s, and have the following feature:
4 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Long rear sight leaf with higher numbers milled off M91/59s are cut down from Izhevsk and Tula M91/30s and some are "sanitized". "1891/59" is stamped on the barrel and easily recognizable. The following marks are typical:
Izhevsk M91/59
Tula M91/59
Sanitized M91/59
Soviet M91/38 carbines are 40 1/2" long, cut down from M91s in Czechoslovakia, and have the following features:
Short rear sight leaf M91/38s are cut down from Russian M91s. The following marks are typical:
Izhevsk M91/38
Tula M91/38
Sestroryetsk M91/38
Pretty Women from Russia 24000 Women' Photo & Video Profiles Find Your Special One from Russia! AnastasiaDates.com Become a Gunsmith Learn how to repair, customize and restore handguns and rifles. www.PennFoster.edu
5 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Finnish M91 ries are 51 1/2" long, dated 1926-1927 and 1940-1943, and have the following features. The rst picture is typical of early conguration and the second picture is typical of late conguration. However, Finnish ries can vary a great deal with no set standards for minor features.
Curved rear sight Blade front sight The early M91s can have "straight" or "stepped" barrels made by Tikkakoski. Following is a picture of a stepped barrel.
The late M91 barrels came from three sources. The following marks are typical:
Finnish M24 ries are 51 1/2" long, undated, and have the following features:
6 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Curved rear sight Blade front sight Early Civil Guard Logo M24 barrels came from two sources, SIG and Germany (Bohler-Stahl). The SIG barrels can be "straight" or "stepped". All Bohler-Stahl barrels are "stepped". The following marks are typical:
Bohler-Stahl barrel mark on bottom, hidden by stock SIG barrel mark on right side of chamber Finnish P-Series ries are 51 1/2" long, dated with "P-26" or "P-27", and have the following features:
Curved rear sight Blade front sight P-Series barrels are scrubbed Russian barrels that have been relined. The following marks are typical: The unmarked barrel to the left is thought to be a "P-25" without any of the typical "P-25" or "S" marks. It is SA marked, of Finnish origin, and considered uncommon. picture courtesy of Arlon
P-Series marking
7 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Finnish M27 ries are 46 1/2" long, dated 1927-1940, and have the following features:
Curved rear sight Closed nose cap (may not have "popsicle sticks") M27s were manufactured at Tikkakoski and VKT. The following marks are typical:
Tikkakoski (Finland) Finnish M28 ries are 46 1/2" long, undated, and have the following features:
VKT (Finland)
Curved rear sight Open nose cap M28 barrel sources were Tikkakoski and SIG. They have the Civil Guard logo "SY". The following marks are typical:
8 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Tikkakoski (Finland)
Finnish M28/30 ries are 46 1/2" long, dated 1934-1940, and have the following features:
Flat rear sight Front sight 1/2" from muzzle M28/30s were made at Sako and the following mark is typical:
M28/30 barrel marking Finnish M39 ries are 46 1/2" long, dated 1941-1945, and have the following features:
9 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Flat rear sight Front sight 1" from muzzle There are six major variations of M39s. The following marks are typical:
VKT
Sako
Sako/SkY
Tikka
No maker/Late date
Finnish M91/30 ries are 48 1/2" long, dated 1943-1944, and have the following features:
Flat rear sight "Stacked" front blade sight M91/30s were made at Tikkakoski and the following mark is typical:
10 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Tikkakoski M91/30
Soviet Military Store Accessories for Ak,Akm,Aksu,Svd Wood,Plastic Furniture. www.soviet-military.com M 1 Garand Sale Buy M 1 Garand And Save Big - Low US Shipping & Fast! M-1-Garand.BuyCheapr.com
Polish, Hungarian, Romanian M44s and Chinese T53 carbines are 40 1/2" long, dated 1951-1960, and have the following feature:
Side folding bayonet M44s were manufactured in Poland, Hungary, and Romania; T53s in China. The following marks are typical:
Poland (M44)
Hungary (M44)
11 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Romania (M44)
China (T53)
Hungarian M91/30 ries are 48 1/2" long, dated in the 1950s, and have the following features:
Flat rear sight Globe front sight The following mark is typical for a Hungarian M91/30:
Hungarian M91/30 Romanian M91/30 ries are 48 1/2" long, dated in the 1950s, and have the following features:
12 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
Flat rear sight Blade front sight The following mark is typical for a Romanian M91/30:
Romanian M91/30 Albanian M91/30 ries are 48 1/2" long, dated 1961, and have the following features:
Flat rear sight Globe front sight The following mark is typical for an Albanian M91/30:
Albanian M91/30
Don't Waste Bulk Ammo Sight in your rifle in 4 shots or less, watch our video to see how www.accuscopeusa.com *Redfield Scope Mounts* Authentic Mounts Starting at Only $6.95 - Free S&H Over $29.95! www.OpticsPlanet.net/Redfield-Mount
13 of 14
2/18/12 2:07 PM
http://www.7.62x54r.net/MosinID/MosinIDII.htm
14 of 14
2/18/12 2:07 PM