TLE 10 – Computer Systems Servicing

Quarter 4, Summative Test 4

Name: __________________________________________ Grade & Section: __________________

Test I - Multiple Choice

Direction: Write the letter that corresponds your answer on the space provided before the
number.
_______ 1. Any changes to the network software or hardware can create problems. This is when reactive
network troubleshooting comes in. Is this statement correct?
a. Yes b. No c. Maybe d. Not Sure
_______ 2. What network troubleshooting approach is also known network breakdown troubleshooting?
a. Proactive network troubleshooting b. Reactive network troubleshooting
c. Preventive network troubleshooting d. Corrective network troubleshooting
_______ 3. Which steps in a scientific problem-solving approach requires to identify what is the problem
all about?
a. State the problem b. Research the problem c. Form a hypothesis d. Test the hypothesis
_______ 4. Which steps in a scientific problem-solving approach requires to dig deeper into the problem?
a. State the problem b. Research the problem c. Form a hypothesis d. Test the hypothesis
_______ 5. Which steps in a scientific problem-solving approach requires to solve the network problem?
a. State the problem b. Research the problem c. Form a hypothesis d. Test the hypothesis
_______ 6. Which steps in a scientific problem-solving approach requires to test the formed hypothesis?
a. State the problem b. Research the problem
c. Form a hypothesis d. Draw conclusions and solve problem
_______ 7. Which steps in a scientific problem-solving approach requires to formulate a hypothesis?
a. State the problem b. Research the problem c. Form a hypothesis d. Test the hypothesis
_______ 8. Which of the following is an example of reactive network troubleshooting approach?
a. Maintaining a troubleshooting schedule b. Maintaining documentation logbook
c. Doing repair as problem occurs d. Having a network design in the wall.
_______ 9. Which of the following is an example of reactive network troubleshooting approach?
a. Diagnose the problem b. Do the replacement of defective parts
c. Do the scheduled troubleshooting d. Test the solution to the problem
_______ 10. The following are the situation when network breakdown usually occurs, except for one.
Which of the following is the least possible reason for network breakdown?
a. A new software was installed. b. A new hardware was installed.
c. A new network technician was installed. d. A new upgrade was performed.
_______ 11. What is the purpose of proactive network troubleshooting?
a. Limit reactive network troubleshooting
b. Do the necessary repair of network breakdown
c. Respond to a problem as they occur
d. Do the necessary replacement of a defective network device

For the items 12, 13, 14 and 15 use the selection below:
I. Redundant Array of Inexpensive Disks (RAID)
II. SNMP and other protocol-based management
III. Planning practices
IV. Network security
V. Developing Fail-Safe
VI. Network management system
VII. Documentation procedures

_______ 12. This provides data striping but no data redundancy at level 0. Which of the proactive network
troubleshooting approach was described?
a. I b. II c. III d. IV

_______ 13. This ensures confidentiality, integrity, and availability of data. Which of the proactive
network troubleshooting approach was described?
a. I b. II c. III d. IV

- 1-
_______ 14. This provides rationale about the importance of a good plan. Which of the proactive network
troubleshooting approach was described?
a. III b. IV c. V d. VI
_______ 15. This reduces the chances of failure in a device. Which of the proactive network
troubleshooting approach was described?
a. III b. IV c. V d. VI
_______ 16. Which of following is an example of security measure?
a. Providing all access to every user using the same login access.
b. Putting passwords easy to remember.
c. Giving every user key to the server room
d. Limiting dial-up access
_______ 17. You want to save your device from failure due to sudden blackout. What Fail-Safe device you
should have?
a. RAID b. SNMP c. UPS d. A spare device
_______ 18. Which part in planning that is concerned about being mission-critical?
a. Scope and timeline for changes or upgrades
b. Prioritization of task c. Testing plan d. Implementation
_______ 19. Which device is required to provide a steady stream of continuous electrical power to a
server?
a. UPS b. AVR c. Switch d. Router
_______ 20. Which RAID system provides no fault tolerance protection?
a. RAID level 0 b. RAID level 1 c. RAID level 3 d. RAID level 5

Good Luck!!!
Sir Lance…..

TLE 10 – Computer Systems Servicing

Quarter 4, Performance Task 4
Instruction: Do this performance task in a long size bond paper. Do not forget to write you name,
Year and Section, TLE Specialization, Quarter number and Performance Task number.
1. Enumerate and explain the Scientific Method as a systematic approach.
2. Enumerate and explain the Planning Practices for Proactive Network Troubleshooting.

RUBRICS IN ASSESSING YOUR OUTPUT

Performace Level (Points)
Criteria
5 points 3 points 1 point
Less than 5 Less than 3
5 scientific methods
Enumeration and scientific methods as scientific methods as
as a systematic
explaination of the a systematic a systematic
approach were
scientific method as a approach were approach were
enumerated and
systematic approach enumerated and enumerated and
explained
explained explained
Less than 6 Less than 3
6 planning practices
Enumeration and planning practices planning practices
for proactive
explaination of the for proactive for proactive
network
planning practices for network network
troubleshooting were
proactive network troubleshooting were troubleshooting were
enumerated and
troubleshooting enumerated and enumerated and
explained
explained explained
Readable but
Output is very neat Readable but has
Neatness of work contains some
and readable many erasures
erasures

Output submitted on Output submitted

Output submitted
Timeliness or before June 9, beyond June 16,
after June 9, 2022.
2022. 2022.

- 2-