07/10/2024, 15:00 Advanced Machining Processes - - Unit 10 - Module 7

(https://swayam.gov.in) (https://swayam.gov.in/nc_details/NPTEL)

[email protected] 

NPTEL (https://swayam.gov.in/explorer?ncCode=NPTEL) » Advanced Machining Processes (course)

Course Assignment 07
outline Your last recorded submission was on 2024-10-03, 14:44 Due date: 2024-10-09, 23:59 IST.
IST
About
1) The workpiece in Electron beam machining (EBM) is held in 1 point
NPTEL ()

vacuum chamber
How does an
dielectric medium
NPTEL
online electrolyte
course none of these
work? ()
2) In non-thermal type Electron beam machining, the electron beam cause 1 point
Prerequisite:
Week 0 () chemical reaction
melting and vaporization of workpiece material
Module 1 ()
mechanical erosion in work piece

Module 2 () conversion of kinetic energy into heat

Module 3 () 3) The vacuum in the Electron Beam machining chamber is of the order of 1 point

10-1 to 10-2 torr

Module 4 ()
10-4 to 10-5 torr
Module 5 () 10-6 to 10-7 torr
10-8 to 10-9 torr
Module 6 ()
4) Electron beam can machine 1 point
Module 7 ()
metals
Lec 16 :
superalloys
Plasma Arc
Machining non-metals
(PAM) (unit? All of these

https://onlinecourses.nptel.ac.in/noc24_me154/unit?unit=50&assessment=111 1/4
07/10/2024, 15:00 Advanced Machining Processes - - Unit 10 - Module 7

unit=50&lesso 5) In Electron beam machining, the order in which electrons passed after emitted by 1 point
n=51) filament cathode
Lec 17 :
diaphragm – anode –focusing lens – Deflector coil
Electron Beam
Machining anode – diaphragm – focusing lens – Deflector coil
(EBM) (unit? focusing lens – anode – diaphragm –Deflector coil
unit=50&lesso
Deflector – coil anode – diaphragm – focusing lens
n=52)

Lecture notes 6) The vacuum in Electron beam machining does not allow 1 point
for module 7
(unit? Rapid deoxidisation of incandescent filament
unit=50&lesso
Rapid oxidation of incandescent filament and beam scattering
n=53)
Both of them
Feedback
Form (unit?
7) Which is/are not the characteristics of plasma 1 point
unit=50&lesso
n=54)
Ionization
Quiz: Electrical conductivity
Assignment
Magnetic field interaction
07
(assessment? Low energy state
name=111)
8) In Electron beam machining beam current and pulse duration varies from 1 point
Module 8 ()
1 A- 10 A and 50 µs-10 ms
Download () 100 μA-1 A and 50 µs-10 ms
100 μA-1 A and 50 µs-100 µs
Live
100 µA-100 mA and 50 µs-100 µs
Sessions ()

9) In Electron beam machining drilling using longer pulse duration results in 1 point

Small and narrow hole

Wide and deeper hole
Hole size independent of pulse duration

10) Performance of Electron beam machining process is significantly influenced by 1 point

Physical property of workpiece material

Mechanical property of workpiece material
Metallurgical property of workpiece material
None of them

11) Which is not the characteristics of power supply in EBM process 1 point

Generate voltage in the range of 150 kV

Pulse energy 120 J/pulse
Computer controlled process variables
Low power density

https://onlinecourses.nptel.ac.in/noc24_me154/unit?unit=50&assessment=111 2/4
07/10/2024, 15:00 Advanced Machining Processes - - Unit 10 - Module 7

12) Plasma arc cutting system can deliver current and voltage level 1 point

1000 A at about 200 V (AC)

1000 A at about 200 V (DC)
100 A at about 100 V (DC)
100 A at about 100 V (AC)

13) Zirconium is used as an electrode material in Plasma arc cutting due to 1 point

High thermal conductivity

Low thermal conductivity
Large heat capacity
High resistance to oxidation

14) Mild steel plate cutting using plasma is commonly carried out using 1 point

Air plasma torch

Oxygen injected torch
Water injected torch
None of them

15) Thickness of heat affected zone in Plasma arc machining is in the range of 1 point

0.1-0.6 mm
6.0-9.0 mm
0.75-5.0 mm
None of them

16) The molten material ejection from the machining zone is independent of plasma jet 1 point
velocity

True
False

17) In Plasma arc cutting, transferred arc mode can machine 1 point

Only electrically conductive workpiece, and arc between electrode and nozzle
Only electrically non-conductive workpiece and arc between electrode and nozzle
Only electrically conductive workpiece, and arc between electrode and workpiece
Both type of workpiece and arc between electrode and workpiece

18) Nitrogen is/are used as the plasma gas in 1 point

Air plasma torch

Oxygen injected torch
Dual gas plasma torch
Water injected torch

https://onlinecourses.nptel.ac.in/noc24_me154/unit?unit=50&assessment=111 3/4
07/10/2024, 15:00 Advanced Machining Processes - - Unit 10 - Module 7

19) The lower part of water injected torch in Plasma arc cutting is made of ceramic to 1 point
avoid

Heat affected zone

Smoke
Formation of oxide
Double arcing

20) The efficiency of Plasma arc cutting when transferred arc is used in 1 point

65%-75%
85%-90%
10%-30%
40%-60%

You may submit any number of times before the due date. The final submission will be
considered for grading.
Submit Answers

https://onlinecourses.nptel.ac.in/noc24_me154/unit?unit=50&assessment=111 4/4