Abstract

Quantity SR.NO. Description Unit Rate Amount

EXCAVATION
ITEM No.1: Excavation for foundation in earth, soils of all types sand, gravel and soft
murum including removing the excavated material upto a distance of 50 metre beyond the
1 building area, stacking and spreading as directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming, watering (including shoring and
strutting) etc. complete. (Lift upto 1.50 Metre)

16.43 Cu.M. 170.00 2792

ITEM No.2: Excavation for foundation in hard Murum including removing the
excavated material upto a distance of 50 metre beyond the building area and stacking and
2 spreading as directed, dewatering, preparing the bed for the foundation and necessary
back filling, ramming, watering including shoring and strutting complete. (above 1.50
Metres lift.)

44.38 Cu.M. 160.00 7101

FILLING EARTHWORK
ITEM No.3: Filling in plinth and floors with contractor's soil, sand or murum in 15
3
centimetre to 20 centimetre Layers including watering and compaction etc. complete.

130.08 Cu.M. 300.88 39139

P.C.C
ITEM No.4: Providing and laying in situ Cement concrete M-15/ 1:2:4 of trap/ granite/
4 quartzite/ gneiss metal for foundation and bedding including form work, dewatering,
compacting roughening them if required and curing etc. complete.

30.14 Cu.M. 3765.27 113485

ITEM No.5: Providing and laying in situ Cement concrete M-20 of trap/ granite/
quartzite/ gneiss metal for reinforced cement concrete work in foundation like raft,
grillages, strip foundation and footings of reinforced cement concrete columns and
5 steel stanchion including bailing out water, form work, compaction, finishing, curing etc.
complete. (Excluding steel reinforcement and structural steel )

20.58 Cu.M. 5061.99 104176

ITEM No.6: Providing and casting in situ Cement concrete M-20 of trap/ granite/
quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs
and drawing or as direccted including centering, formwork, compacting, and finishing the
6 formed surfaces with cement mortar 1:3 or Sufficient minimum thickness to give a
smooth and even surface or roughening if special finish is to be provided and curing etc.
complete. (Excluding reinforcement)

15.04 Cu.M. 5896.99 88691

ITEM No.7: Providing and casting in situ Cement concrete M-20 of trap/ granite/
quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed
7 designs and drawings, or as direccted including centering, formwork, compaction, and
roughening the surface of special finishing to be provided and curing etc. complete
(Excluding reinforcement).

28.03 Cu.M. 5796.99 162490

Quantity SR.NO. Description Unit Rate Amount
ITEM No.8: Providing and casting in situ Cement concrete M-20 of trap/ granite/
quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed
8 designs and drawings, including centering, formwork, compacting, and roughening the
surface is special finish is to be provided and curing etc. complete (Excluding
reinforcement). (7.60 bag/cum)

1.69 Cu.M. 4826.99 8150

ITEM NO.9: Providing and casting in situ cement concrete Mix 20 /1:1.5:3 of trap /
granite / quartzite / gneiss metal for reinforced cement concrete newel post of staircase
per detailed drawing for staircase including centering,formwork,compacting,and
9 roughening them if special finish is to be provided and curing etcetera
complete.(excluding reinforcement)(7.60 bag per cubicmetre)

0.86625 Cu.M. 6696.99 5801

ITEM No.10: Providing and fixing in position H.Y.S.D. bar reinforcement of various
diameters for reinforced cement concrete pile caps, footings, foundations, slabs,
beaams, columns, canopies, stair case, newels, chajjas, lintels, pardis, copings, fins,
10 arches etc. as per detailed designs, drawings and schedules including cutting, bending,
hooking the bars, binding with wires or tack welding and supporting as required
complete.

3.39 M.T. 78000.00 264420

BRICKWORK
ITEM No.11: Providing second class Burnt Brick masonry with conventional/ Indian
standard type bricks in cement mortar 1:6 in plinth as backing with composite masonry
11
including bailing out water manually, striking joints, racking out joints and watering
complete.

32.73 Cu.M. 4587.01 150133

ITEM No.12:- Providing second class Burnt Brick masonry with conventional/ Indian
12 standard type bricks in cement mortar 1:6 in superstructure including striking joints,
racking out joints, watering and scaffolding complete.

89.25 Cu.M. 4717.01 420994

ITEM No.13: Providing internal cement plaster 20 millimetre thick in two coats in
13 cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions
including scaffolding and curing complete.

61.32 Sq.m 561.78 34448

ITEM No14: Providing internal cement plaster 6 millimetre thick in two coats in
14 cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions
including scaffolding and curing complete.

24.96 Sq.m 289.35 7222

ITEM No.15:Providing fine cement finish 1.5mm thick over green plaster surface
15 including scaffolding curing etc complete.

405.63 Sq.m 60.00 24338

ITEM No.16:Providing neeru finish to plastered surfaces in all positions including

16 scaffolding and curing complete.

78.32 Sq.m 31.00 2428

Quantity SR.NO. Description Unit Rate Amount
ITEM No.17: Providing sand faced plaster externally in cement mortar using
Kharsalia/ kasaba or similar type of sand, in all positions including base coat of 15
millimetre thick in cement mortar 1:4 using water proofing compound at 1 kilogram per
17 cement bag, curing the same of the base than 2 days and keeping the surface of the base
coat rough to receive the sand faced treatment 10 millimetre thick in cement mortar 1:4
finishing the surface by taking out grains and curing for fourteen days scaffolding etc.
complete.

304.56 Sq.m 360.18 109696

PAINTING FINISHES
ITEM No.18: Providing and applying priming coat on concrete/ masonry/ asbestos
cement/ plastered surfaces, including scaffolding if necessary, preparing the surface by
18 thoroughly cleaning oil, grease, dirt and other foreign material and sand papering as
required.

98.28 Sq.m 35.00 3440

ITEM No 19: Providing and applying washable oil-bound distemper of approved

19 colour and shade to old and new surfaces in three coats including scaffolding,
preparing the surfaces (excluding the primer coat) complete

98.28 Sq.m 70.00 6880

ITEM No.20: Providing and applying Apex Paint to exterior side of approved quality
colour and shade to old and new surfaces in two coats including scaffolding preparing the
20
surface by cleaning brooming etc complete as directed by Engineer in charge.( This item
is to be executed prior permission of S.E.)

304.56 Sq.m 180.00 54821

ITEM No. 21: Providing and applying three coats of synthetic enamel paint of
21 approved colour to new and old structural steel work and wood work in buildings
including scaffolding if necessary, cleaning and preparing the surface (excluding primer
coat) complete.
10.58 Sq.m 90.00 953

ITEM No. 22: Providing and applying priming coat over new steel and other metal
surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other
22
foreign material, and scoured with wire brushes, fine steel wool, scrappers and sand paper
scaffolding etc. complete.

38.30 Sq.m 60.00 2298

ITEM No. 23: Providing and applying two coats of flat oil paint of approved colour to
23 the old structural steel work and iron work previously painted in buildings including
scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)
complete. : Bd.O.6, Page No.406. D.S.R. I.No.240, Page No.104.
38.30 Sq.M 60.00 2298
FLOORING SKIRTING DADO
ITEM No.24: Providing and fixing Granite stone of approved quality colour and size of
any size 20 mm thick for flooring in required position,pattern / design laid on cment
24 mortor (1:4) including fixing with adhesive and cutting moulding polishings as per
drawings as directed by Engineer in charge.( Prior approval of sample and brand by
Executive Engineer is necesary before use )

6.05 Sq.m 3400.00 20563

ITEM No. 25:Providing sills of polished Green marble sills of 25 mm to 30 mm thick

25 on a bed of 1:4 cement mortor including cment float ,fillings , joints with neat cement
slurry,curing,polishing and cleaning etc complete.

20.15 Sq.m 2100.00 42311

Quantity SR.NO. Description Unit Rate Amount
ITEM NO 26: Providing and fixing Granite stone 20 mm thick for tread and riser of
approved quality colour shade and of required size , polishing including cutting
,moulding to noising polishing fixing and bedding of cement mortar 1:4 and coloured
26
cement floating finishing etc complete as directed by Engineer in charge.(Prior approval
of sample and brand by Executive Engineer is necesary before use )

2.70 Sq.M 3700.00 9990

ITEM NO 27: Providing and laying coloured glazed tiles of first quality of approved
various size and about 5.5 mm to 6.0 mm thick for flooring in required position on a
bed of 1:6 cement mortar including , neat cement float ,(excluding all special required
27
like round edge tiles corner cups) filling joints with neat white cement slurry,curing and
cleaning complete.( Prior approval of sample and brand by Executive Engineer is
necessary before use )

19.40 Sq. M 920.00 17852

ITEM NO. 28:Providing and fixing Granite stone 20 mm thick for slab for kitechen of
approved quality colour shade and or required size polishing including cutting moulding
to noising polshing fixing and bedding of cement mortar 1:4 and coloured cement floating
28
finishing etc complete as directed by in charge.(Prior approval of sample and brand by
Executive Engineer is necesary before use )

5.76 Sq. M 3700.00 21312

ITEM NO 29:Providing and laying coloured glazed tiles of first quality of approved
various size and about 5.5 mm to 6.0 mm thick for dado and skirting in required
position on plaster of 1:4 cement mortar ,(excluding all special required like round edge
29
tiles corner cups) filling joints with neat white cement slurry,curing and cleaning
complete.( Prior approval of sample and brand by Executive Engineer is necessary before
use )

17.01 Sq. M 950.00 16160

DOORS WINDOWS
ITEM No. 30 : Providing and fixing in position powder coated to the approved shade
aluminium sliding windows of two tracks mitred adn mechanically assembled at
corners with frame size of 62 x 45 mm (Bottom frame with gutter section, bottom frame
1.352 Kg/m. and top and side frames 1.257 Kg/M) shutters with sections of 18 mm x 40
30
mm (Wt. 0.56 Kg/m) and interlocking sections 18 mm x 40 mm. (Wt. 0.625 Kg/m)
including 4 mm thick plain sheet glass, glazing clips, rubber / PVC gasket, roller bearing
encased in nylon casing and self locking catch fitter in vertical section with all other
accessories etc. complete

16.80 Sqm 2500.00 42000

ITEM No. 31 : Providing and fixing mild steel grill of size 75 mm x 60 mm and sill of
75 x 25 mm and newel posts for stari cases, including fabricating, fixtures, erecting,
31 painting the grill work with one coat of anti corrosive paint and two coats of oil painting
with approved colour and polishing the sill, hand rail and the newel post with french
polish.
11.10 Sq.M 1800.00 19980

ITEM No. 32: Providing and fixing collapsible steel gates in two leaves, with channel
pickets, pivoted flat bars, including top and bottom guides, roller, stoppers, handles, all
32
fitting accessories, locking arrangement and one coat of red lead primer complete.

10.58 Sq.M 3300.00 34927

ITEM NO. 33: Providing and fixing in position P.V.C. door shutters of standard size
with P.V.C. shutters frame 60 mm x 24 mm panelled with multi chambered hollow plastic
33 section of 200 mm x 20 mm / 75 mm x 20 mm with tongue and groove joint including all
aluminium fixtures and fastening as per detailed drawing as directed.
Quantity SR.NO. Description Unit Rate Amount

6.30 Sq.M 3000.00 18900

ITEM NO. 34:Providing and fixing country teak wood frame of required size as per
drawing for second class doors and windows, ventilators, fan light, cup board and clear
storey windows including chamfering/ rounding, rebating and mild steel hold fast of size
34 300 X 40 X 5 millimetre fixed with screw by drilling holes to wooden frames including
cutting recesses into frame to accommodate outside strip of frame grill and finishing with
oil painting complete.

0.56 Cu.M. 140000.00 78400

ITEM NO. 35:Providing and fixing solid core flush door in single leaf 35 mm. thick,
decorative types, of exterior grade, as per detailed drawing including country teak wood
door frame, approved face veneers on both faces with/without glazing and venetians in
35 the positions shown on the drawings or as directed, all necessary beads, mouldings and
lipping, wrought iron hold fasts, chromium plated fixtures and fastening without/with
brass mortise lock chromium plated handles on both sides and finishing with french
polish/waxing complete (without door frame.).

8.20 Sq.M. 4150.00 34030

SANITARY & WATERSUPPLY
ITEM No. 36: Providing and fixing in position unplasticized polyvinyl chloride (UPVC)
ultra voilet stabilized 100 mm. outer diameter rain water down take pipe confirming to
I.S. 4985 including necessary fitting such as P.V.C. grating bent with door P.V.C. clamps
36 hors shoes at bottom rubber ring and making connection water tight with solvent cement
and testing, boring holes in masonry/ concrete and redoing the same in cement mortar 1:3
curing etc. complete.

16.00 Rg.M. 290.00 4640

ITEM No. 37:-Providing and fixing Orissa pattern type whie glazed earthenware 580 x
440 mm water closet pan including trap cast iron soil and vent pipes upto the outside face
of the wall 1:2 lime concrete/1:5:10 cement concrete bedding,10 liters pvc high level
flushing cistern with fitting,inlet pipe with stop tap/brackets for fixing the cistern 32 mm
37 diameter p v c flush pipe with fitting and cistern 20 mm diameter p v c overflow pipe with
mosquito proof coupling and pull,painting of the cistern and pipes and cutting and
making good walls and floors.( Prior approval of sample and brand a like parryware /
Jaquar / Nitco / Crabtree by Executive Engineer is necessary before use )

2.00 No 3700.00 7400

ITEM No. 38:-Providing and fixing white glazed earthenware lipped flat back/ corner
type Urinal with inlet pipe with stop tap slit capacity PVC high level flushing cistern,
brackets for fixing the cistern, 32 mm. diameter lead/ brass oxidised/ brass chromium
38 plated flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection
upto the outside face of wall. (Prior approval of sample and brand alike
parryware/Jagwar/ Nitco/Crabtree by Executive Engineer is necessary before use ) Spec.
No.:Bd.V.26 Page No. 564

2.00 No 3300.00 6600

ITEM NO. 39: Providing and fixing white glazed squantting type urinals of size 60
39 cm x 35 cm etc complete.

1.00 No 1350.00 1350

ITEM No.40: Providing and laying in position unplasticized polyvinyl chloride (UPVC)
ultra vioilet stabilized 110 mm. outer diameter for soil/ waste pipe confirming to I.S.
4985 including necessary fitting such as P.V.C. bends with door tee with door single
40 junction with door double junciton with door P.V.C. clamps, nails rubber ring and
making all connections water tight with solvent cement and testing, boring holes in
masonry/ concrete and redoing the same in cement mortar 1:4 curing

12.00 Rg.M. 415.00 4980

Quantity SR.NO. Description Unit Rate Amount

ITEM No.41: Providing and constructing Brick Masonary in cement mortar 1:6 for
Inspection Chamber 60 cm. x 45 cm. including 1:4:8 cement concrete foundaiton, 1:2:4
41 cement concrete channels half round S.W.G. pipes, with plastering brick masonry inside
and outside with cement mortar 1:4 and inside neat cement finish including 75 mm. thick
R.C.C. cover etc. complete depth upto 1.20 m

2.00 No 4597.85 9196

ITEM No.42: Providing and constructing Brick Masonary in cement mortar 1:6 for
Inspection Chamber 90 cm. x 45 cm. including 1:4:8 cement concrete foundaiton, 1:2:4
42 cement concrete channels half round S.W.G. pipes, with plastering brick masonry inside
and outside with cement mortar 1:4 and inside neat cement finish including 75 mm. thick
R.C.C. cover etc. complete depth upto 1.20 m.

2.00 No 3495.94 6992

ITEM No.43: Providing and fixing 15 cm. x 10 cm. salt gaized stone ware gully trap
in cement concrete 1:4:8 outside the building including cast iron grating in the sink,
43
connecting glazed stoneware pipe, brick masonry chamber with cast iron grating for the
gully trap, and shahabad stone covering fixed with cement

4.00 No 950.00 3800

ITEM No.44: Providing and fixing coloured glazed earthenware wash Hand Basin of
63 cm x 45 cm. size including single cold water pillar tap/ brackets, rubber plugs and
44 brass chain, stop tap and necessary P.V.C. pipe connections including P.V.C. waste pipe
and bottled trap upto the outside face of the wall.

4.00 No 4200.00 16800

ITEM No.45: Providing and fixing on walls/ ceiling/ floors, 20 mm. diameter light
grade (type) having embossed as ISI Mark galvanised iron pipes with screwed, sockets,
joints and necessary galvanised iron fittings such as sockets, back nuts, elbows, bends,
45 tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls,
slabs etc. and remaking good the demolished portion to restore the same in original
condition neatly and applying anti corrosive primer oil paint and two coats of oil painting
complete.

12.00 Rgm 520.00 6240

ITEM No. 46 : Providing and fixing on walls/ceilling /floors 32 mm diameter light

grade (type) having embossed as ISI Mark galvanised iron pipes with screwed, sockets,
joints and necessary galvanised iron fittings such as sockets, back nuts, elbows, bends
46 tees, reducers, enlargers, plugs, clamps, etc. including necessary drilling holes in walls,
slabs etc. and remaking good the demolished portion to restore the same in original
condition neatly and applying anti corrosive primer oil paint and two coats of oil painting
complete.

12.00 Rg.M. 620.00 7440

ITEM No.47: Providing and fixing on walls/ ceiling/ floors 50 mm. diameter light
grade (type) having embossed as ISI Mark galvanised iron pipes with screwed, sockets,
joints and necessary galvanised iron fittings such as sockets, back nuts, elbows, bends,
47 tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls,
slabs etc. and remaking good the demolished portion to restore the same in original
condition neatly and applying anti corrosive primer oil paint and two coats of oil painting
complete.

16.00 Rg.M. 620.00 9920

Quantity SR.NO. Description Unit Rate Amount
ITEM No.48: Providing and laying in trenches 50 mm. diameter light grade (type)
having embossed as ISI Mark galvanised iron pipes with screwed, sockets, joints and
necessary galvanised iron fittings such as sockets, back nuts, elbows, bends, tees,
48 reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs
etc. and remaking good the demolished portion to restore the same in original condition
neatly and applying anti corrosive primer oil paint and two coats of oil painting complete.

20.00 Rg.M. 720.00 14400

ITEM No.49: Providing and fixing floor trap connection 75 mm. diameter
unplasticized polyvinyl chloride (UPVC) ultra violet stabilized deep seal Nahani trap
including P.V.C. grating confirming to I.S. 4985, rubber plug and piece of P.V.C. pipes
49 of suitable diameter and length upto outside face of wall and making all joints water tight
with providing rubber socketed packing and sealing with suitable and durable water tight
resins and making holes in masonry/ concrete, redoing the same ith cement mortar 1:4
and curing etc. complete.

2.00 No 465.00 930

ITEM No.50: Providing and installing high density polyethylene water storage tanks
50 moulded to seamless perfection from FDA approved grades of polyethylene in approved
shape and size with specified capacity in specified position complete.

1000.00 Lit 7.50 7500

TOTAL 2080803