Mathematical functions

Signal value might require some recalculation or signal update prior to being sent. Understandably, existing columns
in Excel configuration like multiply , add , bit_select might not be flexible enough. To overcome these limitations,
symbolic mathematical expressions can be configured to do calculations automatically on every update of a signal.

Feature list:
Optimized for speed
High parsing performance
if-then-else operator with lazy evaluation
Default implementation with many features
25 predefined functions
18 predefined operators
Unit support
Use postfix operators as unit multipliers (3m -> 0.003)

Mathematical functions
Table. Supported mathematical functions:

Name Argument count Explanation

sin 1 sine function (rad)

cos 1 cosine function (rad)

tan 1 tangent function (rad)

asin 1 arcus sine function (rad)

acos 1 arcus cosine function (rad)

atan 1 arcus tangent function (rad)

sinh 1 hyperbolic sine function

cosh 1 hyperbolic cosine

tanh 1 hyperbolic tangent function

asinh 1 hyperbolic arcus sine function

acosh 1 hyperbolic arcus tangent function

atanh 1 hyperbolic arcus tangent function

log2 1 logarithm to the base 2

log10 1 logarithm to the base 10

log 1 logarithm to base e (2.71828...)

ln 1 logarithm to base e (2.71828...)

exp 1 e raised to the power of x

sqrt 1 square root of a value

sign 1 sign function -1 if x<0; 1 if x>0

rint 1 round to nearest integer

abs 1 absolute value

min variable min of all arguments

max variable max of all arguments

sum variable sum of all arguments

avg variable mean value of all arguments

floor 1 round down to the nearest integer

mod variable modulo operation

It should be noted that trigonometric functions (excluding hyperbolic functions) only support arguments in
radians. This means that arguments for this function have to be recalculated if angle is defined in degrees.
 Value recalculation is only triggered on signal change of the preconfigured signal. That means that using other
signals (via TagValue() call) does not trigger value update.

Some mathematical expression cannot be mathematically evaluated in some conditions, for example, square
root cannot be found for negative numbers. As complex numbers are not supported, result is then equal to Not a
Number (NaN). These results are marked with an invalid (IV) flag.

Binary operations
Table. Supported binary operators:

Operator Description Priority

= assignment -1

» right shift 0

« left shift 0

& bitwise and 0

| bitwise or 0

&& logical and 1

|| logical or 2

<= less or equal 4

>= greater or equal 4

!= not equal 4

== equal 4

> greater than 4

< less than 4

+ addition 5

- subtraction 5

* multiplication 6

/ division 6

^ raise x to the power of y 7

Ternary operators can be used. This expression can be compared to the operator supported by C/C++ language (Table
39). Condition is written before a question (?) sign. If condition is true, result after question sign is selected. If condition
is false, result after colon (:) is selected.

Ternary operations
Table. Supported ternary operators

Operator Description Remarks

?: if then else operator C++ style syntax

Examples
Users can construct their own equation by using the aforementioned operators and functions. These examples can be
seen in Table below.

Table. Example expressions

Expression Description

value * 0.0001 Multiply the tag by a constant.

value + TagValue(”tag/dev_alias/sig_alias/out”) Add value of tag/dev_alias/sig_alias/out to the current tag.

sin(value) Return a predefined sine function value of the tag.

If the value is greater than 5, the result should be equal to 1, otherwise -

(value>5)? 1: 0
equal to 0
Variable called "value" is generated or updated on every signal change and represents the signals being configured. If
another value from tag list is intended to be used, one should use TagValue() function to retrieve its last value.

The inner argument of TagValue() function has to described in a Redis topic structure of WCC Lite. That means that it
has to be constructed in a certain way. Quotes should be used to feed the topic name value, otherwise expression
evaluation will fail.

Every Redis topic name is constructed as tag/[device_alias]/[signal_alias]/[direction]. Prefix tag/ is always used before
the rest of argument. device_alias and signal_alias represent columns in Excel configuration. Direction can have
one of four possible values - rout, out, in, rin; all of which depend on the direction data is sent or acquired device-wise.
For example, "out" keyword marks data sent out of WCC Lite device, whereas "in" direction represents data that WCC
Lite is waiting to receive, for example, commands. Additional "r" before either direction means that data is raw, it is
presented the way it was read by an individual protocol.

Signal mathematics
In this section you will be shown how "math_expression" and other mathematical functions can be used in case of
common signals. You can download configuration to follow along here. Signals which we are concerned with in this
section are highlighted in green color.

Let us analyze what mathematical functions are configured for the signals. For both second and third signals the same
expression will be used: "value + TagValue(”tag/Master/RHR0/out”)". The only difference is that for the second
signal scale function "add" was used.

In this signal configuration the value of second signal is calculated by adding the current value of the second signal
with the value of the first signal. Then the sum of two signals is going to be increased by 5. The third signal is going to
be calculated in the same way except that 5 is not going to be added.

To see how it works let us start Modbus TCP Slave simulation in Vinci application. You can download the
simulation here.

In the picture above you can see 6 registers. However our main focus is null, second and forth registers (Register0,
Register2, Register4) since the first three signals of Modbus Master protocol (RHR0, RHR2 and RHR4) are reading the
values of those registers (accordingly).

Let us go to WCC Lite web-interface to see how these signals are displayed there:
As we can see the values of third and fifth signals have been modified (RHR2 = 2+1+5 = 8; RHR3 = 3+1 = 4).
However the values of the signals that are displayed in the web-interface are intermediate so to speak. All the math is
done in the protocol sevices (Modbus TCP Master in this case). Then those values are transmitted to REDIS service. The
values that are displayed in the web-interface are REDIS values. We are going to see why it is important in another
example.

Now it was mentioned that the values of third and fifth signals depend on the value of the first one. Let us see what
will happen if we change the value of the Register 0. To do so we need to return to VINCI application. Locate Register 0
and double click on it. A menu with the register parameters will appear.

Now let us change the value of the register to 2:

Now it would be expected that the value of second and third signals would become 9 and 5 accordingly (RHR2 =
2+2+5 = 9; RHR3 = 3+2 = 5). However if one would check WCC Lite web-interface right after that, one could notice
that second and third signals remained unchanged:

To explain this let us look again at the math expression of these signals. The equation v
( alue +
TagValue(”tag/Master/RHR0/out”)) consists of two operands "value" and "TagValue(”tag/Master/RHR0/out”)".
Currently the system is designed in such a way that only if "value" operand has changed, only then there is going to be
a change in a signal's value. So that if values of second and forth registers are changed (increased by one in this
example) then the values of third and fifth signals are going to change taking into account the previous change in
value of Register 0 (RHR2 = 2+3+5 = 10; RHR3 = 2+4 = 6).
Command mathematics
In this section you will be shown how "math_expression", and other mathematical functions can be used in case of
command signals. You can download configuration to follow along here. Signals which we are concerned with in this
section are highlighted in blue color.

Let us analyze what mathematical functions are configured for the signals.

First four signals are going to be used for scale function analysis. To see how it works let us start Modbus TCP Slave
simulation in Vinci application. You can download the simulation here.

Let us go to WCC Lite web-interface to see how these signals are displayed there:
As one can notice the values displayed in Vinci application differ from values displayed in web-interface. To better
understand the results let us see step by step how signals are modified.

The first signal RHR0 reads the value of Register 0 which is equal to 4. After read operation the value is multiplied by
two in the master protocol service. Then signal is transmitted to REDIS service. REDIS value is presented in web-
interface. Then the same value 8 is written to Register 1 by sending WSR1 command signal. Finally the value of WSR1
signal is displayed in Vinci simulation.

The third signal RHR2 behaves quite the same as the first RHR0 signal. It reads value of Register 2 and without
performing any scaling operations transmits value to REDIS. It again can be seen in the web-interface. While still in
REDIS service the value of Register 2 is passed to WSR3 signal. Then command signal WSR3 is transmitted back to
Modbus Master protocol service where the value of the signal is scaled. One could expect that the value of the signal
would be multiplied by two but it is divided by two. Then the value of 2 is displayed in Vinci Slave simulation. After
changing the value of Register 3 WSR3 signal is sent back from Master Protocol service to REDIS. On its way the signal
again passes signal scaling place where it is again multiplied by two. This is why we see in the web-interface that the
value of forth signal WSR3 is 4.

All the moments when a signal passes a place where its value is scaled can be seen by turning on a debugger session.
To do so one should connect to WCC Lite via Ubuntu terminal in Terminal application. Then Modbus Master protocol
needs to be stopped by sending "/etc/init.d/modbus-master stop". Then Modbus Master protocol needs to be
started again with -m flag (m for math) "modbus-master -d7 -m -c /etc/modbus-master/modbus-tcp.json".

If you scroll up after starting the session you will be able to find how both RHR0 and WSR3 signals are scaled after
passing signal scaling place.

Why is it the case that the signal is divided instead of being multiplied by two? The answer to this question is that
scaling factor depends on the direction of the signal. When RHR0 signal was travelling from Master Protocol to REDIS
service and was passing the place where signals are scaled the signal was multiplied by scaling factor. On the other
hand when WSR3 signal was travelling from REDIS service to Master Protocol and was passing the same signal scaling
place the signal was divided by scaling factor.

Now let us analyze how "math_expression" and "source_math_expression" are applied to WSR5 signal. To get a better
insight let us look how signals are transmitted and transformed inside WCC Lite and when mathematical expressions
are applied.
Let us analyze the diagram above. As we can see all basic mathematical operations (such as add, multiply, etc.) are
performed inside a Master protocol service. When signals are transmitted between protocols they travel through REDIS
service. The period of existence of a signal inside the REDIS service can be divided into four stages. They can be
denoted by their endings, namely: "rout", "out", "in" and "rin". At "out" and "rin" stages signal values can be seen
through certain interfaces that is why they are displayed in a purple color with blue eyes on them. At "out" stage a
signal is displayed on WCC Lite web-interface, at "rin" stage signal value can be seen through Vinci application. As one
could notice "math_expression" is applied before "out" stage and "source_math_expression" is performed before "rin"
stage.

However in our particular example we did not configure any Slave device. In this situation signal transportation inside
REDIS service can be depicted as following:

Let us return to our example and let us see what are the values of WSR5 signal in WCC Lite web-interface and Vinci
Slave simulation.
The diagram below explains how these values were calculated.

Extra functions
Several functions are defined make tag operations possible:

TagValue(key) - returns last known value of tag identified by redis key;

TagFlag(key) - returns 1 if tag flag exists. Name format is: ”key flag”. For example to check if tag is non
topical, name would be ”tag/19xxxxxxx/x/x nt”;
TagAttribute(key) - similar to TagFlag, but returns a numeric value of a tag attribute;
TagTime(key) - returns UNIX timestamp in milliseconds of a last know tag value.

Revision #6
Created 6 October 2020 10:41:40 by Raimundas Slavinskas
Updated 9 August 2023 08:02:56 by Tomas