RELIANCE Intelligent Lighting Platform II

Remote Control Device

User Manual
96A0481, Rev. B, 2019/12/06
A.0 Disclaimer / Standard Warranty
CE certification

The equipment listed as CE certified means that the product complies with the essential requirements concerning safety and
hygiene. The directives that have been taken into consideration in the design are available on written request to ADB
SAFEGATE.

ETL certification

The equipment listed as ETL certified means that the product complies with the essential requirements concerning safety and
FAA Airfield regulations. The directives that have been taken into consideration in the design are available on written request
to ADB SAFEGATE.

LED Product Guarantee

Where applicable, per FAA EB67 (applicable edition), ADB SAFEGATE L858(L) Airfield Guidance Signs are warranted against
electrical defects in design or manufacture of the LED or LED specific circuitry for a period of 4 years. ADB SAFEGATE LED light
fixtures (with the exception of obstruction lighting) are warranted against mechanical and physical defects in design or
manufacture for a period of 12 months from date of installation; and are warranted against electrical defects in design or
manufacture of the LED or LED specific circuitry for a period of 4 years per FAA EB67 (applicable edition).

Note
See your sales order contract for a complete warranty description. In some specific cases, deviations are (to be)
accepted in the contract, which will supersede the standard warranty.

Standard Product Guarantee

Products of ADB SAFEGATE manufacture are guaranteed against mechanical, electrical, and physical defects (excluding lamps)
which may occur during proper and normal use for a period of one year from the date of installation or 2 years from date of
shipment and are guaranteed to be merchantable and fit for the ordinary purposes for which such products are made. ADB
SAFEGATE L858 Airfield Guidance Signs are warranted against mechanical and physical defects in design or manufacture for a
period of 2 years from date of installation per FAA AC 150/5345-44 (applicable edition).

Note
See your sales order contract for a complete warranty description.

All Products Guarantee

LED Products of ADB SAFEGATE, manufactured and sold by ADB SAFEGATE or its licensed representatives, meets the
corresponding requirements of FAA, ICAO and IEC.
ADB SAFEGATE will correct by repair or replacement per the applicable guarantee above, at its option, equipment or parts
which fail because of mechanical, electrical or physical defects, provided that the goods have been properly handled and
stored prior to installation, properly installed and properly operated after installation, and provided further that Buyer gives
ADB SAFEGATE written notice of such defects after delivery of the goods to Buyer. Refer to the Safety section for more
information on Material Handling Precautions and Storage precautions that must be followed.
ADB SAFEGATE reserves the right to examine goods upon which a claim is made. Said goods must be presented in the same
condition as when the defect therein was discovered. ADB SAFEGATE furthers reserves the right to require the return of such
goods to establish any claim.
ADB SAFEGATE’s obligation under this guarantee is limited to making repair or replacement within a reasonable time after
receipt of such written notice and does not include any other costs such as the cost of removal of defective part, installation
of repaired product, labor or consequential damages of any kind, the exclusive remedy being to require such new parts to be
furnished.

96A0481, Rev. B, 2019/12/06 iii

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II

ADB SAFEGATE’s liability under no circumstances will exceed the contract price of goods claimed to be defective. Any returns
under this guarantee are to be on a transportation charges prepaid basis. For products not manufactured by, but sold by ADB
SAFEGATE, warranty is limited to that extended by the original manufacturer.
This is ADB SAFEGATE’s sole guarantee and warranty with respect to the goods; there are no express warranties or warranties
of fitness for any particular purpose or any implied warranties of fitness for any particular purpose or any implied warranties
other than those made expressly herein. All such warranties being expressly disclaimed.

Liability

WARNING
Use of the equipment in ways other than described in the catalog leaflet and the manual may result in personal injury,
death, or property and equipment damage. Use this equipment only as described in the manual.

ADB SAFEGATE cannot be held responsible for injuries or damages resulting from non-standard, unintended uses of its
equipment. The equipment is designed and intended only for the purpose described in the manual. Uses not described in the
manual are considered unintended uses and may result in serious personal injury, death or property damage.
Unintended uses includes the following actions:

• Making changes to equipment that have not been recommended or described in this manual or using parts that are not
genuine ADB SAFEGATE replacement parts or accessories.
• Failing to make sure that auxiliary equipment complies with approval agency requirements, local codes, and all applicable
safety standards if not in contradiction with the general rules.
• Using materials or auxiliary equipment that are inappropriate or incompatible with your ADB SAFEGATE equipment.
• Allowing unskilled personnel to perform any task on or with the equipment.
© ADB SAFEGATE BVBA

This manual or parts thereof may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, photocopying, recording, nor otherwise, without ADB SAFEGATE BVBA’s prior written consent.
This manual could contain technical inaccuracies or typographical errors. ADB SAFEGATE BVBA reserves the right to revise this
manual from time to time in the contents thereof without obligation of ADB SAFEGATE BVBA to notify any person of such
revision or change. Details and values given in this manual are average values and have been compiled with care. They are not
binding, however, and ADB SAFEGATE BVBA disclaims any liability for damages or detriments suffered as a result of reliance
on the information given herein or the use of products, processes or equipment to which this manual refers. No warranty is
made that the use of the information or of the products, processes or equipment to which this manual refers will not infringe
any third party’s patents or rights. The information given does not release the buyer from making their own experiments and
tests.

iv
Copyright © ADB Safegate, All Rights Reserved
TABLE OF CONTENTS

1.0 Safety.........................................................................................................................................................................................1
1.1 Safety Messages.......................................................................................................................................................................................................... 1
1.1.1 Introduction to Safety...................................................................................................................................................................................2
1.1.2 Intended Use.................................................................................................................................................................................................... 2
1.1.3 Material Handling Precautions: Storage................................................................................................................................................ 3
1.1.4 Maintenance Safety....................................................................................................................................................................................... 3
1.1.5 Arc Flash and Electric Shock Hazard........................................................................................................................................................3
2.0 RELIANCE IL Remote................................................................................................................................................................ 5
2.1 Manual Introduction...................................................................................................................................................................................................5
2.1.1 How to work with the manual................................................................................................................................................................... 5
2.1.2 Terms....................................................................................................................................................................................................................5
2.2 RELIANCE IL Remote Introduction........................................................................................................................................................................6
2.2.1 Individual Lamp Control & Monitoring System (ILCMS) ...............................................................................................................6
2.2.2 General............................................................................................................................................................................................................. 10
2.2.3 Illustration....................................................................................................................................................................................................... 11
2.2.4 Checking the Device....................................................................................................................................................................................11
2.2.5 View of the device with connections....................................................................................................................................................12
2.2.6 View of the device with connections....................................................................................................................................................13
2.2.7 Theory of Operation....................................................................................................................................................................................14
3.0 Installation.............................................................................................................................................................................. 17
3.1 Installation in a Transformer Pit...........................................................................................................................................................................17
3.2 Connection to the Series Transformer and the Light Fitting(s)...............................................................................................................18
3.3 Utility Remote Enclosure Wiring Diagram.......................................................................................................................................................20
3.4 Earth Grounding........................................................................................................................................................................................................21
3.5 Safety Instructions.................................................................................................................................................................................................... 21
3.6 Replacing an RELIANCE IL Remote.....................................................................................................................................................................21
4.0 Modes of Operation of an RELIANCE IL Remote................................................................................................................ 23
4.1 Frequency Scan..........................................................................................................................................................................................................23
4.2 Operating Mode........................................................................................................................................................................................................23
4.2.1 Self-test Mode............................................................................................................................................................................................... 23
4.3 Switch Status of the Connected Lights.............................................................................................................................................................23
4.4 Switch Status under Special Circumstances....................................................................................................................................................24
4.4.1 Power-up Mode............................................................................................................................................................................................ 24
4.4.2 Fail-safe Mode...............................................................................................................................................................................................24
4.4.3 Delayed Start/Stop.......................................................................................................................................................................................24
4.5 Spreadsheet................................................................................................................................................................................................................ 25
4.5.1 A sample spreadsheet would contain:................................................................................................................................................. 25
5.0 Parts.........................................................................................................................................................................................27
5.1 Spare Components...................................................................................................................................................................................................27
A.0 SUPPORT................................................................................................................................................................................ 29
A.1 ADB SAFEGATE website..........................................................................................................................................................................................29
A.2 Recycling......................................................................................................................................................................................................................30
A.2.1 Local authority recycling...........................................................................................................................................................................30
A.2.2 ADB SAFEGATE recycling.......................................................................................................................................................................... 30

96A0481, Rev. B, 2019/12/06 v

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
TABLE OF CONTENTS

vi
Copyright © ADB Safegate, All Rights Reserved
1.0 Safety
Introduction to Safety

This section contains general safety instructions for installing and using ADB SAFEGATE equipment. Some safety instructions
may not apply to the equipment in this manual. Task- and equipment-specific warnings are included in other sections of this
manual where appropriate.

1.1 Safety Messages

HAZARD Icons used in the manual

For all HAZARD symbols in use, see the Safety section. All symbols must comply with ISO and ANSI standards.
Carefully read and observe all safety instructions in this manual, which alert you to safety hazards and conditions that may
result in personal injury, death or property and equipment damage and are accompanied by the symbol shown below.

WARNING
Failure to observe a warning may result in personal injury, death or equipment damage.

DANGER - Risk of electrical shock or ARC FLASH

Disconnect equipment from line voltage. Failure to observe this warning may result in personal injury, death, or
equipment damage. ARC Flash may cause blindness, severe burns or death.

WARNING - Wear personal protective equipment

Failure to observe may result in serious injury.

WARNING - Do not touch

Failure to observe this warning may result in personal injury, death, or equipment damage.

CAUTION
Failure to observe a caution may result in equipment damage.

Qualified Personnel

Important Information
The term qualified personnel is defined here as individuals who thoroughly understand the equipment and its safe
operation, maintenance and repair. Qualified personnel are physically capable of performing the required tasks, familiar
with all relevant safety rules and regulations and have been trained to safely install, operate, maintain and repair the
equipment. It is the responsibility of the company operating this equipment to ensure that its personnel meet these
requirements.
Always use required personal protective equipment (PPE) and follow safe electrical work practice.

96A0481, Rev. B, 2019/12/06 1

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Safety

1.1.1 Introduction to Safety

CAUTION
Unsafe Equipment Use
This equipment may contain electrostatic devices, hazardous voltages and sharp edges on components
• Read installation instructions in their entirety before starting installation.
• Become familiar with the general safety instructions in this section of the manual before installing,
operating, maintaining or repairing this equipment.
• Read and carefully follow the instructions throughout this manual for performing specific tasks and
working with specific equipment.
• Make this manual available to personnel installing, operating, maintaining or repairing this
equipment.
• Follow all applicable safety procedures required by your company, industry standards and
government or other regulatory agencies.
• Install all electrical connections to local code.
• Use only electrical wire of sufficient gauge and insulation to handle the rated current demand. All
wiring must meet local codes.
• Route electrical wiring along a protected path. Make sure they will not be damaged by moving
equipment.
• Protect components from damage, wear, and harsh environment conditions.
• Allow ample room for maintenance, panel accessibility, and cover removal.
• Protect equipment with safety devices as specified by applicable safety regulations
• If safety devices must be removed for installation, install them immediately after the work is
completed and check them for proper functioning prior to returning power to the circuit.

Failure to follow this instruction can result in serious injury or equipment damage

Additional Reference Materials

Important Information

• IEC - International Standards and Conformity Assessment for all electrical, electronic and related technologies.

• IEC 60364 - Electrical Installations in Buildings.

• FAA Advisory: AC 150/5340-26 (current edition), Maintenance of Airport Visual Aid Facilities.

• Maintenance personnel must refer to the maintenance procedure described in the ICAO Airport Services Manual,
Part 9.

• ANSI/NFPA 79, Electrical Standards for Metalworking Machine Tools.

• National and local electrical codes and standards.

1.1.2 Intended Use

CAUTION
Use this equipment as intended by the manufacturer
This equipment is designed to perform a specific function, do not use this equipment for other purposes

• Using this equipment in ways other than described in this manual may result in personal injury, death
or property and equipment damage. Use this equipment only as described in this manual.

Failure to follow this instruction can result in serious injury or equipment damage

2
Copyright © ADB Safegate, All Rights Reserved
1.1.3 Material Handling Precautions: Storage

CAUTION
Improper Storage
Store this equipment properly
• If equipment is to be stored prior to installation, it must be protected from the weather and kept free
of condensation and dust.

Failure to follow this instruction can result in equipment damage

1.1.4 Maintenance Safety

DANGER
Electric Shock Hazard
This equipment may contain electrostatic devices

• Do not operate a system that contains malfunctioning components. If a component malfunctions,

turn the system OFF immediately.
• Disconnect and lock out electrical power.
• Allow only qualified personnel to make repairs. Repair or replace the malfunctioning component
according to instructions provided in its manual.

Failure to follow these instructions can result in death or equipment damage

1.1.5 Arc Flash and Electric Shock Hazard

DANGER
Series Circuits have Hazardous Voltages
This equipment produces high voltages to maintain the specified current - Do NOT Disconnect while
energized.

• Allow only qualified personnel to perform maintenance, troubleshooting, and repair tasks.
• Only persons who are properly trained and familiar with ADB SAFEGATE equipment are permitted to
service this equipment.
• An open airfield current circuit is capable of generating >5000 Vac and may appear OFF to a meter.
• Never unplug a device from a constant current circuit while it is operating; Arc flash may result.
• Disconnect and lock out electrical power.
• Always use safety devices when working on this equipment.
• Follow the recommended maintenance procedures in the product manuals.
• Do not service or adjust any equipment unless another person trained in first aid and CPR is present.
• Connect all disconnected equipment ground cables and wires after servicing equipment. Ground all
conductive equipment.
• Use only approved ADB SAFEGATE replacement parts. Using unapproved parts or making
unapproved modifications to equipment may void agency approvals and create safety hazards.
• Check the interlock systems periodically to ensure their effectiveness.
• Do not attempt to service electrical equipment if standing water is present. Use caution when
servicing electrical equipment in a high-humidity environment.
• Use tools with insulated handles when working with airfield electrical equipment.

Failure to follow these instructions can result in death or equipment damage

96A0481, Rev. B, 2019/12/06 3

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Safety

4
Copyright © ADB Safegate, All Rights Reserved
2.0 RELIANCE IL Remote
Reliance™ IL Remotes – User Manual
General notice: other product names used here are for identification purposes only and may be trademarks of their respective
companies.

Master Remote

2.1 Manual Introduction

• This document provides detailed information how to correctly install and maintain RELIANCE IL remotes.

2.1.1 How to work with the manual

1. Be familiar with the structure and content.
2. Carry out the actions completely and in the given sequence.

2.1.2 Terms
General Aviation Terms and Acronyms that you may encounter using our manuals.

Table 1: Terms
Term Definition

Acronym for Airfield Lighting Control Monitoring System. An ALCMS incorporates many
components that are used to control and monitor an airport’s entire airfield lighting system.
ALCMS
The ALCMS may include Touch Screens for lighting control, Maintenance Center(s) for data
viewing and archiving, Electrical Lighting equipment for CCR control and monitoring.

Abbreviation for Constant Current Regulator. The CCRs are located within the Airfield
CCR Lighting Vault (ALV). They produce a constant current output to the airfield series circuit that
light the airfield lighting fixtures.

ADB SAFEGATE’s trademarked abbreviation that describes the future proofing technology
RELIANCE™ IL Remote, Master, PC
used to transmit and receive data across airfield lighting series circuit cabling.

Unit installed in the airfield (normally in pull-pits or base cans) which provides control and
Remote monitoring of individual or blocks of light fixtures. Each Remote has its own unique address
for control and monitoring data communication to the Master.

96A0481, Rev. B, 2019/12/06 5

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
RELIANCE IL Remote

Table 1: Terms (continued)

Term Definition

Unit installed within the lighting vault that provides the means for data communication on
the airfield series circuit cables. The Master is connected in parallel (across) to the output of
Master
the CCR. Each series circuit that contains Remotes must also have a Master installed at the
CCR.

This term is used to reference the device used to control and monitor the controllable
stopbars and the associated lighting equipment. The control panel could be either an L-821
Control Panel
style pushbutton panel or a Touchscreen style control panel. The control panel is located in
the Air Traffic Control Tower cab.

Acronym which means Surface Movement Guidance and Control System. SMGCS is an
SMGCS
organized system created to improve and enhance low visibility operations.

2.2 RELIANCE IL Remote Introduction

2.2.1 Individual Lamp Control & Monitoring System (ILCMS)

Compliance with Standards

FAA: Approved for use with SMGCS Systems. This includes both Stop Bar and Runway Guard Light control/monitoring
according to AC 150/5340-28 (Current Edition); manufactured to AC 120-57 (Current Edition).

ICAO: Complies with CAT I/II/III ICAO lamp supervision requirements. Supports A-SMGCS for enhanced aircraft guidance in all
weather conditions. Supports safety of airport operations by integration in runway safety nets.

IEC: Developed in accordance with IEC 61508

Introduction

The RELIANCE® Intelligent Lighting (IL) is ADB SAFEGATE's state-of-the art individual lamp control and monitoring system.
RELIANCE Intelligent Lighting provides a radical leap in performance over prior airfield power line carrier systems. The system
is designed to communicate on the existing airfield series circuit power line without requiring separate dedicated cabling.

Uses

RELIANCE Intelligent Lighting provides distributed intelligence in the airfield to control and monitor a variety of airfield
lighting devices. It can be used in the following applications:

• Key component of (Advanced-) Surface Movement Guidance Control Systems: (A-)SMGCS

• Stop bar control and monitoring: taxiway routing support.
• Elevated and in-pavement Runway Guard Light (RGL) control and monitoring, CAT II/III monitoring support.
• Failed-lamp detection and location identification.
• Interface with aircraft/vehicle presence sensors (option).
• Selective control and monitoring of various airfield lighting devices.
The system provides relevant information concerning the status of connected airfield lighting devices to both airport
maintenance and air traffic control personnel.

6
Copyright © ADB Safegate, All Rights Reserved
Furthermore RELIANCE Intelligent Lighting:

• Supports the optimization of traffic volume, flexibility, maintainability and airside safety.
• Ensures reliable guidance for aircraft on the ground during CAT I, II or III conditions, increasing safety and reducing the
risk of runway incursions.
• Automatically detects and reports lamp failures, decreasing downtime and maintenance costs.

Customer Benefits

• Faster, predictable and more robust power line carrier communication method ensures highest reliability even for long
airfield circuits that contain large number of lamps.
• Increased number of slots per day as a result of higher traffic throughput and better control of ground traffic movements.
• Flexible routing functionality and safe operation under all traffic and environmental conditions resulting in reduced ATC
workload.
• Precise control of each segment of runways, taxiways, and stop bar lighting.
• Adjacent lamp failure reporting.
• Most economic solution for modernization projects through power line communication on existing circuits.
• Easy future upgrade of installed RELIANCE Intelligent Lighting systems.
• A step-by-step migration strategy can then be implemented.
• Optimized planning of runway and taxiway maintenance downtimes.
• Worldwide availability of our regional Technical Service staff for technical support and site services on short notice.

RELIANCE Intelligent Lighting Platform II Technology

• Communicates using a radio frequency signal imposed on the high- voltage airfield series circuit cable - no separate
communication cable needed.
• Communication quality is automatically optimized for each series circuit in a permanent background process.
• New communication principle together with forward error correction drastically reduces signal disturbance caused by
impulse and narrow band interferences.
• Main system elements: RELIANCE IL Master (in the substation), RELIANCE IL Remotes (for individual control and
monitoring of lights in the field). In addition, RELIANCE IL Utility Remote for communication with and energy supply for
local field sensors.

Features

• No separate communication cable required. RF signal on high voltage power cable for lighting control.
• Most cost-effective and proven solution for existing ground lighting systems.
• User friendly integrated web server allows easy operation and system status recognition.
• Up to 11 different frequency bands can be used in parallel, and up to 32 different timeslots which allow an increase in the
number of independent communication channels up to 176.
• Fast and predictable switching times through the use of reliable communication methods and limited repeater levels.
• Synchronizing of control systems in different vaults by Ethernet in compliance with IEEE 1588.
• Single Frequency Network system includes an automatic network configuration function. This functionality provides for
dynamic communication adaptation in all environmental conditions (such as humidity variation). The system dynamically
checks repeater settings and automatically sets them, even if a Remote in the communication path has failed.
• Less crosstalk due to symmetrical design of coupling components (transmit and receive path), independent
communication channels and lower transmission power compared to similar systems in the market.
• Can be used as a stand-alone monitoring system or integrated with an Airfield Lighting Control System (ALCS).

96A0481, Rev. B, 2019/12/06 7

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
RELIANCE IL Remote

• Individual control of different functions in one lamp circuit. For example, a combination of Stop Bar and Lead-In Circuit.
• Optional Runway Guard Light Remotes, automatic start and net-synchronous Wig-Wag operation, independent from
Master meeting FAA requirements.
• Firmware and application software can be downloaded into either the Master (substation) or Remotes (field units).
• State-of-the-art diagnostic tools provide a quick overview about communication behavior. Network management system
provides detailed routing statistics to ensure reliable communication quality.
• Communication measurements can be taken in advance within one day to analyze existing airfield infrastructure.
• Field sensors can be integrated via Utility Remotes into the RELIANCE Intelligent Lighting lamp control and monitoring
circuit for detection and transmission of local surveillance information via power line communication.
• Able to work with any kind of CCR and designed for 40 Ampere peak current.

Main Characteristics and Figures

• Up to 300 Remotes per circuit, providing a potential of 600 individually addressable lights per circuit.
• Up to 20 km roundtrip circuit length.
• Configurable block evaluation modes include full feedback, small sample feedback, and optimistic feedback.
• Can command 10 blocks to 10 distinct states with one power-line message. Can command all blocks to one state with one
powerline message.
• Switches up to 120 lights in 10 different groups in less than 1 second.
• Switches 5 stopbar/lead-on lights simultaneously and presents real-back indication in less than 1 second.
• Status poll provides detailed Remote and lamp parameters.

Integrated System Control

Overall system configuration and control is realized via a control process with integrated web server for configuration and
maintenance.

• Each circuit is equipped with a microprocessor-controlled Master for tracking, recording and management of state of all
Remotes in the circuit.
• The Master communicates with all the Remotes (not light fixtures) in a circuit and polls all lamps independent from the
control system.

Overall System Specifications

Description Remote Master

Operating temperature -40 °C to +65 °C 0 °C to +55 °C

Storage temperature -55 °C to +85 °C -40 °C to +75 °C

Operating humidity Max. 100 % Max. 95 % non condensing

Series circuit operating voltage - Max. 5000 V AC RMS

Min. / max. Power line current 1.8 up to 8.25A RMS 1.8 up to 8.25A RMS

Series circuit peak voltage - Max. 15 kV

Maximum switching power secondary side of 300 W (single Remote) Ch A + Ch B < 300 W -
transformer (dual)

Maximum circuit load (CCR power) - 30 kVA

Power consumption Max. 8 W at 6.6 A Max. 15 W for power supply 115-230 V Max.
65 W on primary circuit at 6.6 A

8
Copyright © ADB Safegate, All Rights Reserved
Description Remote Master

Enclosure protection level IP 68 / NEMA 6 P IP 20

LAN connection to upper control system - IEEE 802.3 100 BaseT / IEEE1588 PTP

Net voltage of power supply - 115 - 230 V AC ±15 %, 50/60 Hz

MTBF > 200.000 h > 200.000 h

Indicative MTTR < 30 min < 60 min

Lightning protection 20 kA (8/20 micro sec.) 17 kA (8/20 micro sec.)

Description Remote Master

EMC (CE approved) Compliant to the EN 61000-6-4 (EMC emission standard)

Compliant to the EN 61000-6-2 and 6-5 (EMC immunity standard)
Compliant to the 60950 (IT equipment standard)

Power Up Mode On; Off; Flashing; Maintained (last commanded state)

Fail-Safe Mode On; Off; Flashing, Maintained (last commanded state)

Number of controlled and monitored lamps 1 or 2 Up to 300 Remotes or 600 lights, if dual
per unit Remotes are used

Number of I/O Remotes per circuit - Max. 16

Transmit Frequency 11 different frequency bands between 20 kHz and 200 kHz

Data transmission rate power line Up to 8 kbps Up to 8 kbps

Description Remote Master

Dimensions (W x H x D) / Weight 208 x 78 x 142 / 2.2 kg (single Remote) / 2.3 435.8 x 177.5 x 421.5mm / 22.3 kg
kg (dual)

Lamp failure reaction Short is placed across isolation transformer -

as soon as lamp flament failure detected

Power Storage after Power-Off Remote does not reset and remains in -
operation, if circuit power loss < 1.5 sec.
Remote start up time is less than 1 sec.

Circuit Specifications

Cable type L-824 is recommended, for example FLYCY or equivalent. The following parameters (∗) represent the specific
characteristic needed in an equivalent L-824 cable. Reuse of existing installations and layout with maximum cable length or
number of lights to be verified.

Cable type (specification) L-824

Capacity of the cable <165 nF/km 1

Inductance of the cable <0.20 mH/km 1

typical impedance (125 kHz) 35 Ohm

Attenuation of the signal at 125 kHz <5.8 dB/km 1

Length of serial circuit 20 km roundtrip (12.4 miles)

maximum

Insulation resistance of the series circuit against the L-824 shield or ground 50 Megaohms minimum 2

Secondary transformer attenuation ≤ 23 dB at 100 kHz 1

Notes
1 Contact ADB SAFEGATE for support
2 Technical requirement, not excluding ICAO /FAA compliance

96A0481, Rev. B, 2019/12/06 9

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
RELIANCE IL Remote

System Overview

Air Traffic
Control
Airfield Lighting Airfield Lighting
Substation Substation

Standard

Constant
Option
Current PC Maintenance
Regulator Center

Hub Elevated Taxiway Centerline Lights

Lights
Master Stopbar
Lights

Single Dual
Remote Remote

Legend
Commands from ATC (Fiber Optic)
Series
Transformer
Field communication (Ethernet)
Power line

Ordering Code: Masters

RELIANCE IL Master, 19″ Rack Mount AGC1110

RELIANCE IL Master, Wall Mount, Door Open Left AGC2110

RELIANCE IL Master, Wall Mount, Door Open Right AGC3110

Ordering Code: Remotes

RELIANCE IL Single Channel Remote, FAA Style 7 AGC4170

RELIANCE IL Single Channel Remote, FAA Style 8 AGC4180

RELIANCE IL Single Channel Remote, FAA Style 7, Initial Flash Off AGC4270

RELIANCE IL Single Channel Remote, FAA Style 7, Initial Flash On AGC4370

RELIANCE IL Dual Channel Remote, FAA Style 7 AGC5170

RELIANCE IL Dual Channel Remote, FAA Style 7, Channel A Initial Flash On, Channel B Initial Flash Off AGC5470

RELIANCE IL Utility Remote AGC6110

2.2.2 General
The RELIANCE IL Remotes are intelligent powerline addressable field devices that operate on the secondary side of airfield
isolation transformers. They serve as slave nodes in a master/slave network that is controlled by a RELIANCE IL Master. The
RELIANCE IL Remote is available in the following four versions:

• RELIANCE IL Remote single channel for controlling one light (airfield ground lighting)
• RELIANCE IL Remote dual channel for controlling two lights (airfield ground lighting)

10
Copyright © ADB Safegate, All Rights Reserved
• RELIANCE IL Remote RGL single channel for network-synchronized blinking after switching on, without master
synchronization (Runway Guard Light)
• RELIANCE IL Remote RGL dual channel for continuous, network-synchronized, alternating blinking of both channels after
switching on, without master synchronization (Runway Guard Light)

In terms of construction, they differ in the number of channels which in turn determines the number of lights that can be
switched.
RGL Remotes leave the factory with a special configuration that ensures synchronous start-up after power-up of the regulator
and network-synchronized blinking without master synchronization. The factory setting also includes the choice whether the
blinking is to start with “initial flash On” or “Off”. This option makes it possible to have different groups of Remotes flash
alternately, leveling the load on the constant current regulator caused by synchronous switching of all groups of Remotes.
In the following sections all four devices will be referred to as RELIANCE IL Remotes.

2.2.3 Illustration
Figure 1: RELIANCE IL Remote single

2.2.4 Checking the Device

2.2.4.1 Scope of Supply
The RELIANCE IL Remote single channel is supplied with two 12-inch (30 cm) cord-set cables for connection to the series
transformer and the light.
The RELIANCE IL Remote dual channel is supplied with three 12-inch (30 cm) cord-set cables, 1 for connection to the series
transformer and 2 for connection to the lights.
The RELIANCE IL Remote single channel RGL is supplied with two 12-inch (30 cm) cord-set cables for connection to the series
transformer and the light, adjusted at the factory for configured start-up after switching on (consistent adjustment for all RGL
Remotes in a project).
The RELIANCE IL Remote dual channel RGL is supplied with three 12-inch (30 cm) cord-set cables, 1 for connection to the
series transformer and 2 for connection to the lights; adjusted at the factory for configured start-up after switching on.
See Parts for the complete list of remote variants.

2.2.4.2 Unpacking
The device has been fully assembled, tested and packed at the factory and has no internal transport locks.

2.2.4.3 Inspection
The delivery must be checked to make sure that it is complete and in perfect condition. The supplier must be notified of any
complaints within 2 weeks. After this period, complaints about the delivery will not be accepted. In the event of the goods
being returned, the same transport packaging must be used. See Figure 2.
The number on the nameplate must be checked against the order number on the delivery note.

96A0481, Rev. B, 2019/12/06 11

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
RELIANCE IL Remote

The nameplate is located on the side of the device (example: RELIANCE IL Remote single channel).
Figure 2: Nameplate of the RELIANCE IL Remote Duel Channel

For commissioning, the serial number on the nameplate (e.g. serial number 4015000220, see Figure 2) must be recorded. This
is then utilized for installation and configuration.

2.2.4.4 Storage
When storing the device, it is advisable to leave it in its original packaging. The storage temperature is shown in “Technical
Specifications”.
Storage Temperature: Remote: -67°F to +167°F (-55°C to +75°C)

2.2.5 View of the device with connections

Figure 3: View of the RELIANCE IL Remote Dual Channel
5. Reliance Remote, Dual Channel
X1

X4

X3

4. Ground Screw 6. Remote ID Label

X2

1. Cable with 2-pin plug (in compliance with FAA L-823) for connection to the series circuit isolation transformer (X3)
2. Cable with 2-pin socket (in compliance with FAA L-823) for connection to the light on channel A (X1)
3. Cable with 2-pin socket (in compliance with FAA L-823) for connection to the light on channel B (for dual Remote only)
(X4)
4. Ground cable connection (X2)
5. RELIANCE IL Remote housing
6. RELIANCE IL Remote Label for Remote ID number.

Note
See nameplate of RELIANCE IL Remote (Figure 2) for identification of connections marked “X”.

12
Copyright © ADB Safegate, All Rights Reserved
2.2.6 View of the device with connections
Figure 4: View of the RELIANCE IL Utility Remote Cabinet

Note
See the remote cabinet wiring diagram for connections.

2.2.6.1 Construction
The RELIANCE IL Remote is sealed to make it watertight and gas-tight and must not be opened.

96A0481, Rev. B, 2019/12/06 13

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
RELIANCE IL Remote

Note
Once the Remote has been opened, the warranty is void.
A defective or open Remote must be returned to the manufacturer.

2.2.6.2 Block diagram

Figure 5: Block diagram of the RELIANCE IL Remote dual

2.2.7 Theory of Operation

Background Information: RELIANCE IL uses power line carrier technology to communicate between controlling units on an
airfield lighting series circuit. A RELIANCE IL system typically consists of one high voltage modem, or Master, connected with
the Constant Current Regulator (CCR) powering the airfield lighting circuit and many slave units, or Remotes, collocated with
individual lights in the field. A typical RELIANCE IL topology is provided in Figure 6.
Figure 6: Typical RELIANCE IL Topology

14
Copyright © ADB Safegate, All Rights Reserved
2.2.7.1 Architecture
Figure 7 depicts the general nature of the system components and their interactions. The “Control System”, shown in grey, is
an external ALCMS system that provides controlling commands and digests Master and Fixture status reports. There is
typically only one control system in the architecture. The “Master”, shown in blue, is the high voltage modem that
communicates commands to and receives status from the fixtures. There can be many masters in a given system. Masters
digest commands from the control system and provide status to it. Masters also communicate among themselves to maintain
communication timing synchronization. Each master communicates with the fixtures on its respective circuit.
Figure 7: Series Circuit Master / Fixture Architecture

96A0481, Rev. B, 2019/12/06 15

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
RELIANCE IL Remote

16
Copyright © ADB Safegate, All Rights Reserved
3.0 Installation
Installation is identical for all RELIANCE Remote versions.
Figure 8: Diagram of RELIANCE IL installation in series circuit

1. Light Fixture 5. Remote Input Plug (TRANSFORMER)

2. Light Fixture Plug 6. Transformer Secondary Receptacle

3. Remote Output Receptacle (LAMP) 7. Primary Series Circuit

4. Remote 8. L-830/L-831 Isolation Transformer

3.1 Installation in a Transformer Pit

The orientation required for installation is indicated by the labeling on the nameplate.
This ensures optimum heat dissipation through the housing. If the device is installed by suspension, free air circulation must
be provided for the RELIANCE IL Remote.

Note
If several RELIANCE IL Remotes are installed in a single pit, they should be spaced with a distance of at least 2-inch
(50mm) from each other and from the series transformers to have optimum communication signal separation.
Because the communication signal is coupled magnetically, the distance between the transformers should also not be
less than 2-inch (50mm).

Minimum distance between remote cable feed-through and pit walls is 2-inch (50 mm).
Figure 9: Remote max. bending radius

96A0481, Rev. B, 2019/12/06 17

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Installation

3.2 Connection to the Series Transformer and the Light Fitting(s)

The 2-pin plug on cable X1 is connected to the socket for the secondary circuit of the series transformer. The light(s) is/are
connected to the 2-pin socket(s) of the cable(s) X3 (and X4 for the RELIANCE IL dual Remote).
All plug connections must be sealed with self-bonding insulation tape or using “heat shrink” sleeves.
To improve water tightness, an optional watertight heat shrink sleeve can be installed at the junction of the plug and
receptacle: (see Figure 10)
Figure 10: Connection to series transformer and light fitting

1. Place the heat shrink sleeve over the light inset plug wire.
2. Connect the inset light plug to the Remote receptacle designated CHANNEL A (and CHANNEL B if used).
3. Pull the heat shrink sleeve over the plug-to-receptacle connection. Heats shrink the sleeve.

18
Copyright © ADB Safegate, All Rights Reserved
 Repeat steps 1 through 3 for the Remote plug designated TRANSFORMER and the transformer secondary receptacle.

96A0481, Rev. B, 2019/12/06 19

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Installation

3.3 Utility Remote Enclosure Wiring Diagram

20
Copyright © ADB Safegate, All Rights Reserved
3.4 Earth Grounding

To protect it against a surge generated by lightning, each RELIANCE IL Remote should be provided with a separate, low
induction and low resistance ground connection via the ground screw. The ground cable must be connected to the ground
screw by means of a suitable cable lug. The cross-sectional area of the cable should be at least AWG 8 (6 mm2) with a
maximum cable length of 36- inch (1m).
If the isolation value of the earth ground is bad, it is better NOT to connect the remote to earth ground (see Figure 11).
Figure 11: Connection to a series circuit isolation transformer and light fitting

3.5 Safety Instructions

DANGER
Read this entire manual prior to starting any work.
Work on 120/240 V power supply systems or the series circuit must only be carried out by trained, qualified staff. The
currently applicable regulations according to international standards must be followed. Also see the “Safety” section.

Note
The RELIANCE IL Remote is maintenance free.
The RELIANCE IL Remote must never be opened, otherwise warranty will be void.

3.6 Replacing an RELIANCE IL Remote

1. In each case, inspect the technical condition of the RELIANCE IL Remote which has to be removed or replaced, or the
RELIANCE IL Remote which is to be installed as a replacement device.
2. If the old remote is still communicating with the master (can be verified with the RELIANCE IL Configuration software), it is
recommended to logout this remote prior to removal.
Follow the “Logout procedure” procedure as described in “96A0430 RELIANCE IL Configuration Software User Manual”. If
the remote is completely dead, Step 2 is not applicable.
3. Switch off and disconnect the associated series circuit from the incoming power by removing the fuses of the Constant
Current Regulator (CCR).
4. Pull out the cut-out for the series circuit, if possible ground the series circuit and wait about 5 minutes until the circuit is
fully discharged.
5. Removing a RELIANCE IL Remote: first, separate the series circuit connections X3 and X1 and, in the case of the RELIANCE
IL dual Remote, X4 at the cable plug connections.
Then, open the ground connection X2 by unscrewing the earth ground screw.

96A0481, Rev. B, 2019/12/06 21

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Installation

6. Installing a RELIANCE IL Remote: install the new RELIANCE IL Remote according to the Installation.
7. Switch on the associated series circuit and verify if the replaced remote connected lamp(s) are functioning (for RGL
remotes: blinking).
8. Follow the “change remote” procedure as described in “96A0430 RELIANCE IL Configuration Software - User Manual” to
make the replaced remote operational.

22
Copyright © ADB Safegate, All Rights Reserved
4.0 Modes of Operation of an RELIANCE IL Remote

4.1 Frequency Scan

Initial State on a new remote from the factory.

State on delivery
On delivery, each new RELIANCE IL Remote that has not yet been logged on with a RELIANCE IL Master is in “frequency scan
mode”. For power-up mode (“On”), fail-safe mode (“On”) and Delayed Start/Stop (“Off”) it uses the factory settings, which are
given here in brackets (default values). RGL//Wig-wag remotes are pre-configured with “Blink” for power-up and fail-safe
mode.
Base state
A RELIANCE IL Remote that has been logged off from a circuit also reverts to frequency scan mode. However, for power-up
mode, fail-safe mode and Delayed Start/Stop it uses the most recent settings received from the RELIANCE IL Master (most
recent configuration). In frequency scan mode, a RELIANCE IL Remote, when it is installed in a series circuit and the latter is
turned on, searches on all frequency bands for a master telegram containing its serial number. If this search is successful, the
RELIANCE IL Remote logs on to the corresponding RELIANCE IL Master. When an RELIANCE IL Remote is logged off from a
circuit, it reverts to base state.

4.2 Operating Mode

After successfully logging on, a RELIANCE IL Remote automatically switches to “operating mode” (normal operation) and
receives its configuration parameters from the RELIANCE IL Master. All parameters are stored firmly in the RELIANCE IL
Remote. In operating mode, all lights connected to the RELIANCE IL Remotes can be switched independently of each other via
single or block commands (i.e. a command switches a predefined group of lights).The switch commands can be “On”, “Off” or
“Blink”.
When a RELIANCE IL Remote receives a switch command it returns the message “switch command executed” (block
command) or “switch command received” (single command). However, the real status of the lights is only determined at the
next status polling by the RELIANCE IL Master. In the RELIANCE IL Remote, each switching operation for the light is carried out
first via an electronic switch and then via a relay (“blink” mode is established with electronic switch only).
Each RELIANCE IL Remote monitors the status of the lights connected to it (maximum of two lights). The monitoring takes
place when the light is switched on by default. Whether the lamp should be monitored in the “Off” state too, is configurable.
Once a lamp failure has been detected (“Open”), the light is no longer monitored during this operation period and switch
commands for this light are ignored. It will not be checked again until the circuit has been switched off and on again or after
the reception of a reset command (software function) from the RELIANCE IL PC.

4.2.1 Self-test Mode

After the series circuit has been switched on, each RELIANCE IL Remote runs a self-test. If an error is detected through this
test, the RELIANCE IL Remote switches to error mode. This means that communication with a RELIANCE IL Master is not
possible.
During normal operation, the remote also checks the switching and high voltage protection devices. If any problem should
occur with these devices (after 9 lightning strike for example), a specific error message is sent to the master.

4.3 Switch Status of the Connected Lights

One light can be connected to each RELIANCE IL single channel Remote, and up to two lights (“A” and “B”) can be connected
to each RELIANCE IL dual channel Remote. A light can assume the following types of status:

• “Off” (light is switched off and not burning).

• “On” (light is switched on and the electric circuit is closed).
• “Open” (light is switched on but the electric circuit is not closed, i.e. the light filament is broken or the light is not
connected).
• “Blink” (light flashing; no information as to whether the light is “On” or “Off” at the time of polling).

96A0481, Rev. B, 2019/12/06 23

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Modes of Operation of an RELIANCE IL Remote

On the Graphical User Interface (GUI), the status of each light is indicated by the terms given in quotation marks.

4.4 Switch Status under Special Circumstances

With the help of the RELIANCE il PC software, the user has to configure each RELIANCE IL Remote of a circuit to which the
Remote shall switch its connected lights:

• When the series circuit is powered up (power-up mode),

• When the communication between the RELIANCE IL PC and the RELIANCE IL Master or between the RELIANCE IL Master
and the RELIANCE IL Remote is interrupted (fail-safe mode),
• And if there is to be a Delayed Start/Stop or not (when several lights are switched simultaneously by a block command).

4.4.1 Power-up Mode

The “power-up mode” defines to which status the RELIANCE IL Remotes should switch their lights directly after power-up of
the series circuit. The parameters of the following types of switch status can be set via the RELIANCE IL PC:

• “On”.
• “Off”.
• “Blink” (flashing).
• “Last Commanded State” (maintain the last operating status).
This mode ends after a switch command from the RELIANCE IL Master has been received.

4.4.2 Fail-safe Mode

As soon as the RELIANCE IL Remote detects a failure of the communication with its RELIANCE IL Master or receives a failsafe
telegram from it, it switches the connected light(s) into a predefined status. This status can be parameterized via the
RELIANCE IL PC software as follows:

• “On”.
• “Off”.
• “Blink” (flashing).
• “Last Commanded State” (maintain the last operating status).
The duration of the interval before a communication problem is identified can be configured via the RELIANCE IL PC software
as well. The failsafe mode is not exited automatically after communication has been restored but only after the RELIANCE IL
Remote has received a switch command from the RELIANCE IL Master.

4.4.3 Delayed Start/Stop

When switching several lights via a block command, the lights can be controlled using a defined delay (ms), which can be
configured. This setting ensures constant current regulator stability in case of large load fluctuations. The following
parameters can be set:

• No delayed switching.
• Delayed switch-on/off setting 1 (10ms delay per lamp)
• Delayed switch-on/off setting 2 (20ms delay per lamp)
• Delayed switch-on/off setting 3 (30ms delay per lamp)
• Delayed switch-on/off setting 4 (40ms delay per lamp)
• Delayed switch-on/off setting 5 (50ms delay per lamp)

24
Copyright © ADB Safegate, All Rights Reserved
4.5 Spreadsheet

A proper accounting of installed remotes and the fixture identifier to which they are installed must be maintained during the
installation of the remotes. This table will later on be used to build the ALCMS database. See Figure 12.
Figure 12: Spreadsheet Example

4.5.1 A sample spreadsheet would contain:

• Vault/substation name: the official name of the vault/substation were the circuit is powered.
• Circuit name: the local name of the circuit (like TC3).
• Circuit length: the approximate length of the circuit (in kilometers).
• Total number of light fixtures: for reference only (not required).
• Number of remotes: the total number of RELIANCE IL remotes on this circuit.
• Remote name: is automatically generated, but may be altered to serve your own needs. Max. 50 characters are allowed.
Remember that this will be your only lead to identify and locate lights and remotes out of the RELIANCE IL system.
• Serial number: is unique for every RELIANCE IL remote and is required to fill-in.
• Pit Name/Nr: for your own reference only.
• Transfo type: (transformer type) only for your reference.
• Light reference: unique identifier for the connected light fixture on the airfield (see AutoCAD drawing).
• Light Fixture Type: for your own reference only.
• If the remote is a Dual type: reference must be filled in for Channel B also, even if the light fixture is the same as for
Channel A (one fixture with 2 lamps).

Underlined information is mandatory and the absolute minimum required data.

96A0481, Rev. B, 2019/12/06 25

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Modes of Operation of an RELIANCE IL Remote

26
Copyright © ADB Safegate, All Rights Reserved
5.0 Parts

Table 2: Ordering Code: Masters

RELIANCE IL Master, 19” Rack Mount AGC1110

RELIANCE IL Master, Wall Mount, Door Open Left AGC2110

RELIANCE IL Master, Wall Mount, Door Open Right AGC3110

Table 3: Ordering Code: Remotes

RELIANCE IL Single Channel Remote, FAA Style 7 AGC4170

RELIANCE IL Single Channel Remote, FAA Style 8 AGC4180

RELIANCE IL Single Channel Remote, FAA Style 7, Initial Flash Off AGC4270

RELIANCE IL Single Channel Remote, FAA Style 7, Initial Flash On AGC4370

RELIANCE IL Dual Channel Remote, FAA Style 7 AGC5170

RELIANCE IL Dual Channel Remote, FAA Style 7, Channel A Initial

AGC5470
Flash On,

RELIANCE IL Utility Remote AGC6110

5.1 Spare Components

Table 4: Parts
Description Part No.

RELIANCE IL Rack-mount, High voltage Filter Assembly 44A7352-10

GB Industrial Grade Flash Card 105A1155

92 CFM RELIANCE IL Master Fan Assembly 44A7657

RELIANCE IL Master Touchscreen 105A1108

Low-voltage PCB Assembly 44A7605

High-voltage PCB Assembly 44A7379-1

Control Module 44A7512

96A0481, Rev. B, 2019/12/06 27

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
Parts

28
Copyright © ADB Safegate, All Rights Reserved
Appendix A: SUPPORT
Our experienced engineers are available for support and service at all times, 24 hour/7 days a week. They are part of a
dynamic organization making sure the entire ADB SAFEGATE is committed to minimal disturbance for airport operations.

Table 5: ADB SAFEGATE Support

Live Technical Support - Americas
If at any time you have a question or concern about your product, just contact ADB SAFEGATE’s
technical service department. Trained in all areas of system issues, troubleshooting, quality control
and technical assistance, our highly experienced Technical support specialists are available 24 hours
a day, seven days a week to provide assistance over the phone.
ADB SAFEGATE Americas Technical Service & Support (US & Canada): +1-800-545-4157
ADB SAFEGATE Americas Technical Service & Support (International): +1-614-861-1304
During regular business hours, you can also Chat with a Service Technician. We look forward to
working with you!
Before You Call
When you have an airfield lighting or system control system problem it is our goal to support
airfield maintenance staff as quickly as possible. To support this effort we ask that you have the
following information ready before calling.

• The airport code

• If not with an airport, then company name (prefer customer id number)

• Contact phone number and email address

• Product with part number preferable or product number

• Have you reviewed the product’s manual and troubleshooting guide

• Do you have a True RMS meter available (and any other necessary tools)

• Be located with the product ready to troubleshoot

Note
For more information, see www.adbsafegate.com, or contact ADB SAFEGATE Support via email at
[email protected] or
Brussels: +32 2 722 17 11
Rest of Europe: +46 (0) 40 699 17 40
Americas: +1 614 861 1304. Press 3 for technical service or press 4 for sales support.
China: +86 (10) 8476 0106

A.1 ADB SAFEGATE website

The ADB SAFEGATE website, www.adbsafegate.com, offers information regarding our airport solutions, products, company,
news, links, downloads, references, contacts and more.

96A0481, Rev. B, 2019/12/06 29

Copyright © ADB Safegate, All Rights Reserved
RELIANCE Intelligent Lighting Platform II
SUPPORT

A.2 Recycling

A.2.1 Local authority recycling

The disposal of ADB SAFEGATE products is to be made at an applicable collection point for the recycling of electrical and
electronic equipment. The correct disposal of equipment prevents any potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling. The recycling of materials helps to
conserve natural resources. For more detailed information about recycling of products, contact your local authority city office.

A.2.2 ADB SAFEGATE recycling

ADB SAFEGATE is fully committed to environmentally-conscious manufacturing with strict monitoring of our own processes as
well as supplier components and sub-contractor operations. ADB SAFEGATE offers a recycling program for our products to all
customers worldwide, whether or not the products were sold within the EU.
ADB SAFEGATE products and/or specific electrical and electronic component parts which are fully removed/separated from
any customer equipment and returned will be accepted for our recycling program.
All items returned must be clearly labelled as follows:

• For ROHS/WEEE Recycling

• Sender contact information (Name, Business Address, Phone number).
• Main Unit Serial Number.
ADB SAFEGATE will continue to monitor and update according for any future requirements for EU directives as and when EU
member states implement new regulations and or amendments. It is our aim to maintain our compliance plan and assist our
customers.

30
Copyright © ADB Safegate, All Rights Reserved
Company Addresses

ADB SAFEGATE ADB SAFEGATE, Belgium:

Leuvensesteenweg 585,
B-1930 Zaventem
Belgium

Contact: Email: [email protected]

Tel.: +32 2 722 17 11, Internet: www.adbsafegate.com
Fax: +32 2 722 17 64

ADB SAFEGATE Americas LLC ADB SAFEGATE, Americas:

977 Gahanna Parkway,
Columbus, OH 43230
USA

Contact: Email: [email protected]

Tel.: +1 (614) 861 1304, Internet: www.adbsafegate.com
Fax: +1 (614) 864 2069

ADB SAFEGATE Sweden AB ADB SAFEGATE, Sweden:

Djurhagegatan 19
SE-213 76 Malmö
Sweden

Contact: Email: [email protected]

Tel.: +46 (0)40 699 17 00, Internet: www.adbsafegate.com
Fax: +46 (0)40 699 17 30

ADB SAFEGATE Airfield Technologies Ltd. China ADB SAFEGATE, China:

Unit 603, D Block,
CAMIC International Convention Center,
No 3, Hua Jia Di East road, ChaoYang district,
Beijing 100102
P.R. China

Contact: Email: [email protected]

Tel.: +86 (10) 8476 0106, Internet: www.adbsafegate.com
Fax: +86 (10) 8476 0090

ADB SAFEGATE Germany GmbH ADB SAFEGATE Germany GmbH, Mannheim:

Konrad-Zuse-Ring 6,
D-68163 Mannheim
Germany

Contact: Email: [email protected]

Tel.: +49 (621) 87 55 76-0, Internet: www.adbsafegate.com
Fax: +49 (621) 87 55 76-55

96A0481, Rev. B, 2019/12/06 31

Copyright © ADB Safegate, All Rights Reserved