0% found this document useful (0 votes)
41 views12 pages

U-Boot TI 32 USB

The document details the boot process of U-Boot SPL and Linux on a Texas Instruments AM625 SK SoC. It includes information about firmware versions, memory allocation, and device tree loading, along with various system messages indicating the initialization of hardware components. Errors related to EEPROM reading and memory reservation overlaps are also noted during the boot sequence.

Uploaded by

210sanantodt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
41 views12 pages

U-Boot TI 32 USB

The document details the boot process of U-Boot SPL and Linux on a Texas Instruments AM625 SK SoC. It includes information about firmware versions, memory allocation, and device tree loading, along with various system messages indicating the initialization of hardware components. Errors related to EEPROM reading and memory reservation overlaps are also noted during the boot sequence.

Uploaded by

210sanantodt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 12

U-Boot SPL 2023.

04-dirty (Sep 03 2024 - 16:33:05 -0400)


SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)')
SPL initial stack usage: 13408 bytes
Trying to boot from MMC2
Authentication passed
Authentication passed
Authentication passed
Authentication passed
Authentication passed
Starting ATF on ARM64 core...

NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty


NOTICE: BL31: Built : 16:09:05, Feb 9 2024

U-Boot SPL 2023.04-dirty (Sep 03 2024 - 16:33:11 -0400)


SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)')
SPL initial stack usage: 1856 bytes
Trying to boot from MMC2
Authentication passed
Authentication passed

U-Boot 2023.04-dirty (Sep 03 2024 - 16:33:11 -0400)

SoC: AM62X SR1.0 HS-FS


Model: Texas Instruments AM625 SK
EEPROM not available at 80, trying to read at 81
Reading on-board EEPROM at 0x51 failed -121
DRAM: no bloblist found!2 GiB
Core: 64 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from nowhere... OK
In: serial
Out: serial
Err: serial
EEPROM not available at 80, trying to read at 81
Reading on-board EEPROM at 0x51 failed -121
Net: eth0: ethernet@8000000port@1
Warning: ethernet@8000000port@2 (eth1) using random MAC address - 02:5e:b8:ac:80:f7
, eth1: ethernet@8000000port@2
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
574 bytes read in 13 ms (43 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc1 ...
## Error: "main_cpsw0_qsgmii_phyinit" not defined
15442432 bytes read in 615 ms (23.9 MiB/s)
57083 bytes read in 17 ms (3.2 MiB/s)
Working FDT set to 88000000
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
ERROR: reserving fdt memory region failed (addr=9ca00000 size=100000 flags=0)
Loading Device Tree to 000000008feef000, end 000000008fffffff ... OK
Working FDT set to 8feef000
Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]


[ 0.000000] Linux version 6.1.83-rt28-ti-rt-g96b0ebd82722 (oe-user@oe-host)
(aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP
PREEMPT_RT Mon May 13 23:06:24 UTC 2024
[ 0.000000] Machine model: Texas Instruments AM625 SK
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] ipc-memories@9c800000 (0x000000009c800000--0x000000009cb00000)
overlaps with ramoops@9ca00000 (0x000000009ca00000--0x000000009cb00000)
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size
128 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-
dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size
3 MiB
[ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible
id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size
1 MiB
[ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size
14 MiB
[ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible
id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size
1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size
12 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible
id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff]
[ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff]
[ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff]
[ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff]
[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 20 pages/cpu s44928 r8192 d28800 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel
configuration
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: console=ttyS2,115200n8
earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-
nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-
boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(osp
i.phypattern);omap2-
nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-
boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system)
root=PARTUUID=1a2fb328-02 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes,
linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,
linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1856136K/2097152K available (9792K kernel code, 1192K
rwdata, 2244K rodata, 1728K init, 422K bss, 109944K reserved, 131072K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
[ 0.000000] No expedited grace period (rcu_normal_after_boot).
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100
jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: 0xffff800008412740
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat,
esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles:
0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every
4398046511102ns
[ 0.000274] Console: colour dummy device 80x25
[ 0.507918] Calibrating delay loop (skipped), value calculated using timer
frequency.. 400.00 BogoMIPS (lpj=200000)
[ 0.507932] pid_max: default: 32768 minimum: 301
[ 0.508046] LSM: Security Framework initializing
[ 0.508233] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.508272] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes,
linear)
[ 0.510570] rcu: Hierarchical SRCU implementation.
[ 0.510580] rcu: Max phase no-delay instances is 400.
[ 0.510644] printk: bootconsole [ns16550a0] printing thread started
[ 0.563190] Platform MSI: msi-controller@1820000 domain created
[ 0.563524] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-
controller@1820000 domain created
[ 0.563619] EFI services will not be available.
[ 0.563975] smp: Bringing up secondary CPUs ...
[ 0.564963] Detected VIPT I-cache on CPU1
[ 0.565120] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[ 0.565143] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000
[ 0.565219] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.615359] Detected VIPT I-cache on CPU2
[ 0.615474] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
[ 0.615489] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000
[ 0.615537] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.641595] Detected VIPT I-cache on CPU3
[ 0.641709] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
[ 0.641725] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000
[ 0.641762] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.641852] smp: Brought up 1 node, 4 CPUs
[ 0.641859] SMP: Total of 4 processors activated.
[ 0.641863] CPU features: detected: 32-bit EL0 Support
[ 0.681304] CPU features: detected: CRC32 instructions
[ 0.681361] CPU: All CPU(s) started at EL2
[ 0.681363] alternatives: applying system-wide alternatives
[ 0.698597] devtmpfs: initialized
[ 0.710544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.710585] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.718614] pinctrl core: initialized pinctrl subsystem
[ 0.719498] DMI not present or invalid.
[ 0.720158] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.744674] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.744998] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic
allocations
[ 0.745129] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic
allocations
[ 0.745324] audit: initializing netlink subsys (disabled)
[ 0.745573] audit: type=2000 audit(0.743:1): state=initialized audit_enabled=0
res=1
[ 0.746301] thermal_sys: Registered thermal governor 'step_wise'
[ 0.746570] ASID allocator initialised with 65536 entries
[ 0.756750] platform a40000.pinctrl: Fixed dependency cycle(s) with
/bus@f0000/pinctrl@a40000/cpsw-cpts
[ 0.769196] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.769211] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.769216] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.769219] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.769224] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.769227] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.769231] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.769234] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.774096] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0
JTAGID[0x0bb7e02f] Detected
[ 0.777285] iommu: Default domain type: Translated
[ 0.777302] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.777754] SCSI subsystem initialized
[ 0.778172] usbcore: registered new interface driver usbfs
[ 0.778218] usbcore: registered new interface driver hub
[ 0.778251] usbcore: registered new device driver usb
[ 0.778840] pps_core: LinuxPPS API ver. 1 registered
[ 0.778845] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.778866] PTP clock support registered
[ 0.779014] EDAC MC: Ver: 3.0.0
[ 0.780029] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100
[ 0.780498] FPGA manager framework
[ 0.780635] Advanced Linux Sound Architecture Driver Initialized.
[ 0.781929] clocksource: Switched to clocksource arch_sys_counter
[ 0.782306] VFS: Disk quotas dquot_6.6.0
[ 0.782360] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.789493] NET: Registered PF_INET protocol family
[ 0.789970] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.791897] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960
bytes, linear)
[ 0.791995] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 0.792015] TCP established hash table entries: 16384 (order: 5, 131072 bytes,
linear)
[ 0.792293] TCP bind hash table entries: 16384 (order: 8, 1310720 bytes, linear)
[ 0.794840] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.795263] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[ 0.795538] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[ H▒▒0.796167] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ [1.024639] printk: console [ttyS2] printing thread started
0.796853] RPC: Registered named UNIX socket transport module.
[ 1.024653] printk: console [ttyS2] enabled
[ 1.024658] printk: bootconsole [ns16550a0] disabled
[ 1.036272] printk: bootconsole [ns16550a0] printing thread stopped
[ 1.038389] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 1.071951] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq
1000000
[ 1.077488] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI
DP83869
[ 1.077505] davinci_mdio 8000f00.mdio: phy[1]: device 8000f00.mdio:01, driver
unknown
[ 1.077572] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version
0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006
[ 1.077872] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5
[ 1.077878] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 1.078689] pps pps0: new PPS source ptp0
[ 1.079046] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c,
freq:500000000, add_val:1 pps:1
[ 1.096636] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 1.101646] mmc0: CQHCI version 5.10
[ 1.108218] pinctrl-single f4000.pinctrl: Invalid number of rows: 0
[ 1.108237] pinctrl-single f4000.pinctrl: no pins entries for wlan-en-pins-
default
[ 1.110664] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present!
[ 1.111449] mmc1: CQHCI version 5.10
[ 1.114225] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present!
[ 1.118864] ti-sci-clk 44043000.system-controller:clock-controller: is_prepared
failed for dev=81, clk=20, ret=-19
[ 1.124595] ALSA device list:
[ 1.124604] No soundcards found.
[ 1.143487] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-
bit
[ 1.149051] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-
bit
[ 1.149609] Waiting for root device PARTUUID=1a2fb328-02...
[ 1.194658] mmc0: Command Queue Engine enabled
[ 1.194685] mmc0: new HS200 MMC card at address 0001
[ 1.195798] mmc1: new high speed SDHC card at address 1388
[ 1.195885] mmcblk0: mmc0:0001 IS032G 29.1 GiB
[ 1.197103] mmcblk1: mmc1:1388 USD00 29.5 GiB
[ 1.200174] mmcblk0boot0: mmc0:0001 IS032G 4.00 MiB
[ 1.200928] mmcblk1: p1 p2
[ 1.202540] mmcblk0boot1: mmc0:0001 IS032G 4.00 MiB
[ 1.204169] mmcblk0rpmb: mmc0:0001 IS032G 4.00 MiB, chardev (240:0)
[ 1.235669] EXT4-fs (mmcblk1p2): recovery complete
[ 1.236564] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode.
Quota mode: none.
[ 1.236679] VFS: Mounted root (ext4 filesystem) on device 179:34.
[ 1.237473] devtmpfs: mounted
[ 1.239647] Freeing unused kernel memory: 1728K
[ 1.239798] Run /sbin/init as init process
[ 1.605922] systemd[1]: System time before build time, advancing clock.
[ 1.683324] NET: Registered PF_INET6 protocol family
[ 1.685271] Segment Routing with IPv6
[ 1.685315] In-situ OAM (IOAM) with IPv6
[ 1.713756] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -
SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -
ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -
P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP
+SYSVINIT default-hierarchy=hybrid)
[ 1.714509] systemd[1]: Detected architecture arm64.

Welcome to Arago 2023.10!

[ 1.757295] systemd[1]: Hostname set to <am62xx-evm>.


[ 1.900216] systemd-sysv-generator[167]: SysV service '/etc/init.d/thermal-zone-
init' lacks a native systemd unit file. Automatically generating a unit file for
compatibility. Please update package to include a native systemd unit file, in
order to make it more safe and robust.
[ 2.196177] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard
output type syslog is obsolete, automatically updating to journal. Please update
your unit file, and consider removing the setting altogether.
[ 2.267203] systemd[1]: Queued start job for default target Multi-User System.
[ 2.303542] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/modprob[ 2.320428] systemd[1]: Created
slice Slice /system/modprobe.
e.
[ OK ] Created slice Slice /system/serial-[ 2.337222] systemd[1]: Created
slice Slice /system/serial-getty.
getty.
[ OK ] Created slice User and Session Slic[ 2.353466] systemd[1]: Created
slice User and Session Slice.
e.
[ 2.368658] systemd[1]: Started Dispatch Password Requests to Console Directory
Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ OK ] Started Forward Password R…uests [ 2.388500] systemd[1]: Started
Forward Password Requests to Wall Directory Watch.
to Wall Directory Watch.
[ OK ] Reached target Path Units.
[ 2.407545] systemd[1]: Reached target Path Units.
[ OK ] Reached target Remote File Systems systemd[1]: Reached target Remote File
Systems.
[0m.
[ OK ] Reached target Slice Units.
[ 2.432130] systemd[1]: Reached target Slice Units.
[ 2.442871] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ OK ] Listening on RPCbind Server Activat[ 2.455551] systemd[1]: Listening on
RPCbind Server Activation Socket.
ion Socket.
[ OK ] Reached target RPC Port Mapper.[ 2.471263] systemd[1]: Reached target
RPC Port Mapper.

[ OK ] Listening on Process Core Dump Sock[ 2.492444] systemd[1]: Listening on


Process Core Dump Socket.
et.
[ 2.507724] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Audit Socket 2.524332] systemd[1]: Listening on
Journal Audit Socket.
0m.
[ OK ] Listening on Journal Socket (/dev/l[ 2.539030] systemd[1]: Listening on
Journal Socket (/dev/log).
og).
[ OK ] Listening on Journal Socket.
[ 2.554150] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Network Service Netlin[ 2.566374] systemd[1]: Listening on
Network Service Netlink Socket.
k Socket.
[ OK ] Listening on udev Control Socket 2.583317] systemd[1]: Listening on
udev Control Socket.
m.
[ OK ] Listening on udev Kernel Socket[ 2.598904] systemd[1]: Listening on
udev Kernel Socket.
.
[ OK ] Listening on User Database Manager [ 2.614045] systemd[1]: Listening on
User Database Manager Socket.
Socket.
[ 2.648683] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 2.665534] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 2.698765] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 2.713939] systemd[1]: Kernel Trace File System was skipped because of a failed
condition check (ConditionPathExists=/sys/kernel/tracing).
[ 2.720385] systemd[1]: Mounting Temporary Directory /tmp...
Mounting Temporary Directory /tmp...
[ 2.745564] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
Starting Load Kernel Module configfs...
[ 2.780253] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
[ 2.798200] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module fuse...[ 2.816020] systemd[1]: Starting
Load Kernel Module fuse...

[ 2.855498] fuse: init (API version 7.37)


Starting Start psplash boot splash screen.[ 2.857601] systemd[1]:
Starting Start psplash boot splash screen...
..
Starting RPC Bind...
[ 2.899291] systemd[1]: Starting RPC Bind...
[ 2.908426] systemd[1]: File System Check on Root Device was skipped because of
a failed condition check (ConditionPathIsReadWrite=!/).
[ 2.909981] systemd[1]: systemd-journald.service: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 2.910005] systemd[1]: (This warning is only shown for the first unit using IP
firewalling.)
[ 2.916747] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 2.982529] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
Starting Generate network …ts from Kernel co[ 3.003016] systemd[1]:
Starting Generate network units from Kernel command line...
mmand line...
[ 3.022896] cryptodev: loading out-of-tree module taints kernel.
[ 3.024874] cryptodev: driver 1.12 loaded.
[ 3.029478] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 3.065463] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
[ 3.065681] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 3.099627] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ OK ] Started Journal Service.
[ 3.112252] systemd[1]: Started Journal Service.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Generate network units from Kernel command line.
[ OK ] Finished Remount Root and Kernel File Systems.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
Starting Apply Kernel Variables...
[ 3.386457] systemd-journald[182]: Received client request to flush runtime
journal.
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /media/ram...
Mounting /var/volatile...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Mounted /media/ram.
[ OK ] Mounted /var/volatile.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ 3.917963] random: crng init done
[ OK ] Finished Load/Save Random Seed.
[ 4.128085] Internal error: synchronous external abort: 0000000096000010 [#1]
PREEMPT_RT SMP
[ 4.128115] Modules linked in: pruss(+) cryptodev(O) fuse drm
drm_panel_orientation_quirks ipv6
[ 4.128155] CPU: 2 PID: 215 Comm: systemd-udevd Tainted: G O
6.1.83-rt28-ti-rt-g96b0ebd82722 #1
[ 4.128164] Hardware name: Texas Instruments AM625 SK (DT)
[ 4.128169] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.128179] pc : 0xffff80000849e190
[ 4.128182] lr : 0xffff8000084992ec
[ 4.128186] sp : ffff000003387680
[ 4.128188] x29: ffff000003387680 x28: 0000000000000040 x27: ffff000001b88f80
[ 4.128198] x26: ffff800008afd460 x25: 0000000000000002 x24: ffff000003185780
[ 4.128207] x23: ffff000003185900 x22: ffff000003285a80 x21: ffff0000031857d0
[ 4.128215] x20: ffff000003185c80 x19: ffff000003162c00 x18: ffffffffffffffff
[ 4.128224] x17: 0000000000000002 x16: 000043b49e8f6a10 x15: ffff00000318590d
[ 4.128233] x14: 0000000000000000 x13: 0078756d2d6b6c63 x12: 65726f632e737375
[ 4.128241] x11: 0101010101010101 x10: 0000000003175300 x9 : 0000000000000001
[ 4.128249] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 505c5b1900b0c0c0
[ 4.128257] x5 : c0c03000195b5c50 x4 : ffff80000918503c x3 : 6660606860606060
[ 4.128266] x2 : ffff80000849e140 x1 : 0000000000000000 x0 : ffff000003185900
[ 4.128277] Call trace:
[ 4.128281] 0xffff80000849e190
[ 4.128286] 0xffff8000084992ec
[ 4.128289] 0xffff800008499960
[ 4.128291] 0xffff80000849de3c
[ 4.128294] 0xffff80000849df18
[ 4.128296] 0xffff800000a7e424
[ 4.128299] 0xffff800000a7e68c
[ 4.128305] 0xffff800000a7e8c4
[ 4.128308] 0xffff80000853b264
[ 4.128311] 0xffff800008538a38
[ 4.128314] 0xffff800008538cc4
[ 4.128317] 0xffff800008538d9c
[ 4.128320] 0xffff800008539570
[ 4.128322] 0xffff800008536850
[ 4.128325] 0xffff8000085384b4
[ 4.128329] 0xffff800008537e4c
[ 4.128332] 0xffff800008539eb4
[ 4.128335] 0xffff80000853af14
[ 4.128338] 0xffff800000a5901c
[ 4.128340] 0xffff800008013960
[ 4.128343] 0xffff8000080a6554
[ 4.128346] 0xffff8000080a7fbc
[ 4.128349] 0xffff8000080a85d4
[ 4.128353] 0xffff8000080a866c
[ 4.128356] 0xffff80000801db1c
[ 4.128359] 0xffff80000801dc10
[ 4.128362] 0xffff80000898d650
[ 4.128365] 0xffff80000898eb04
[ 4.128367] 0xffff800008011488
[ 4.128378] Code: 0a030083 97fffe8b a8c17bfd d65f03c0 (b9400084)
[ OK ] Found device /dev/ttyS2.
[ 4.348754] ---[ end trace 0000000000000000 ]---
[ 4.370772] systemd-journald[182]: Oldest entry in
/run/log/journal/76b1738095d0412e9e5b0e7656170ba8/system.journal is older than the
configured file retention duration (1month), suggesting rotation.
[ OK ] Started Network Time Synchronizatio[ 4.370815] systemd-
journald[182]: /run/log/journal/76b1738095d0412e9e5b0e7656170ba8/system.journal:
Journal header limits reached or header out-of-date, rotating.
n.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary [ 4.396087] mc: Linux media
interface: v0.10
Directories.
[ OK ] Reached target System Time Set.
[ 4.422055] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-
memory@9cb00000
[ 4.422277] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode
[ 4.422350] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device
[ 4.422688] remoteproc remoteproc0: 5000000.m4fss is available
[ OK ] Reached target Timer Units.
[ 4.423254] videodev: Linux video capture interface: v2.00
[ OK ] Listening on Avahi mDNS/DNS-SD Stac[ 4.424196] remoteproc remoteproc0:
Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2
k Activation Socket.
[ 4.424237] remoteproc remoteproc0: powering up 5000000.m4fss
[ OK ] Listening on D-Bus System Message B[ 4.424283] remoteproc remoteproc0:
Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2
[ 4.424292] remoteproc remoteproc0: request_firmware failed: -2
[ 4.589821] platform 78000000.r5f: ti-sci processor request failed: -19
[ 4.589856] platform 78000000.r5f: ti_sci_proc_request failed, ret = -19
us Socket.
[ 4.591175] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: k3_r5_core_of_init
failed, ret = -19
Starting Docker Socket for the API...
[ 4.591200] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000:
k3_r5_cluster_of_init failed, ret = -19
[ OK ] Listening on dropbear.socket.
Starting D-Bus System Message Bus...
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Socket Units.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Reached target Basic System.
Starting Print notice about GPLv3 packages...
Starting IPv6 Packet Filtering Framework...
Starting IPv4 Packet Filtering Framework...
Starting Expand the rootfs…ll size of the boot device....
Starting User Login Management...
[ OK ] Started TEE Supplicant.
Starting Telnet Server...
[ OK ] Finished IPv6 Packet Filtering Framework.
[ OK ] Finished IPv4 Packet Filtering Framework.
[ OK ] Finished Telnet Server.
[ OK ] Reached target Preparation for Network.
Starting Network Configuration...
[ OK ] Finished Expand the rootfs…full size of the boot device..
[ OK ] Started User Login Management.
[ 6.179451] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ 6.202074] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.202905] cfg80211: Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.206361] platform regulatory.0: Direct firmware load for regulatory.db failed
with error -2
[ 6.206415] cfg80211: failed to load regulatory.db
[ OK ] Started Network Configuration.
Starting Network Name Resolution...
[ 6.369974] am65-cpsw-nuss 8000000.ethernet eth1: PHY [8000f00.mdio:01] driver
[Generic PHY] (irq=POLL)
[ 6.370023] am65-cpsw-nuss 8000000.ethernet eth1: configuring for phy/rgmii-rxid
link mode
[ 6.371983] am65-cpsw-nuss 8000000.ethernet eth1: Link is Up - 100Mbps/Full -
flow control rx/tx
[ 6.384120] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 6.416156] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver
[TI DP83869] (irq=POLL)
[ 6.416201] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid
link mode
[ OK ] Created slice Slice /system/systemd-fsck.
[ OK ] Found device /dev/mmcblk1p1.
Starting File System Check on /dev/mmcblk1p1...
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
Starting Avahi mDNS/DNS-SD Stack...
Starting containerd container runtime...
[ OK ] Started Netperf Benchmark Server.
[ OK ] Started NFS status monitor for NFSv2/3 locking..
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS2.
[ OK ] Reached target Login Prompts.
Starting Synchronize System and HW clocks...
[FAILED] Failed to start Synchronize System and HW clocks.
See 'systemctl status sync-clocks.service' for details.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Finished File System Check on /dev/mmcblk1p1.
Mounting /run/media/boot-mmcblk1p1...
[ OK ] Mounted /run/media/boot-mmcblk1p1.
***************************************************************
***************************************************************
NOTICE: This file system contains the following GPL-3.0 packages:
bash
cifs-utils
dosfstools
grub-common
grub-editenv
grub-efi
less
libdw1
libelf1
libgcc1
libreadline8
libstdc++6
parted

If you do not wish to distribute GPL-3.0 components please remove


the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:
opkg remove <package>
Where <package> is the name printed in the list above

NOTE: If the package is a dependency of another package you


will be notified of the dependent packages. You should
use the --force-removal-of-dependent-packages option to
also remove the dependent packages as well
***************************************************************
***************************************************************
[ OK ] Finished Print notice about GPLv3 packages.
[ OK ] Started containerd container runtime.
[ OK ] Reached target Multi-User System.
Starting Record Runlevel Change in UTMP...
[ OK ] Finished Record Runlevel Change in UTMP.
[ 10.530621] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 1Gbps/Full - flow
control rx/tx
[ 10.530706] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|

Arago Project am62xx-evm -

Arago 2023.10 am62xx-evm -

am62xx-evm login: root


[ 14.835313] audit: type=1006 audit(1725395207.169:2): pid=560 uid=0 old-
auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
[ 14.835351] audit: type=1300 audit(1725395207.169:2): arch=c00000b7 syscall=64
success=yes exit=1 a0=8 a1=ffffd8a7fe18 a2=1 a3=ffff8d0b6020 items=0 ppid=1 pid=560
auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1
comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 14.835364] audit: type=1327 audit(1725395207.169:2): proctitle="(systemd)"
root@am62xx-evm:~# lsusb
root@am62xx-evm:~#

You might also like