Scribd
Upload
113 views6 pages

SBA Questions 2024-25 Section 1 & 2

The document outlines the SBA questions for Technical Drawing at Bishop’s High School for 2025, divided into two sections: Fundamentals of Technical Drawing and Geometric Construction. It includes questions on industrial safety, fire-fighting equipment, first aid, tools and equipment used in technical drawing, and various geometric constructions such as tangents, ellipses, and projections. The document emphasizes practical skills through sketches and construction principles.

Uploaded by

teodortjames
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
113 views6 pages

SBA Questions 2024-25 Section 1 & 2

The document outlines the SBA questions for Technical Drawing at Bishop’s High School for 2025, divided into two sections: Fundamentals of Technical Drawing and Geometric Construction. It includes questions on industrial safety, fire-fighting equipment, first aid, tools and equipment used in technical drawing, and various geometric constructions such as tangents, ellipses, and projections. The document emphasizes practical skills through sketches and construction principles.

Uploaded by

teodortjames
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Bishop’s High School

Technical Drawing
SBA Questions
2025

SECTION 1
Fundamentals of Technical Drawing

1A- Occupational Health, Safety and the Environment

Question (1) Industrial Safety

a. What is meant by Industrial Safety?


b. List five (5) way it can be implemented.
b. Explain why preventative maintenance is important?

Question (2) Fire and Fire-Fighting Equipment

a. List five (5) types of fire extinguishers.


b. Identify the type of fires for which each are responsible.

Question (3) First Responder

a. Who is a first responder?


b. Describe the First Aid activities related to a broken limb
or a ten (10) feet fall.

1B- Equipment, Tools, Materials, Lettering, Line work, Dimensions and Scales

Question (1) Equipment, Tools and Material

a. List five (5) Tools and five (5) Equipment use in Technical Drawing.
Question (2) Equipment, Tools and Material

a. Make neat freehand sketches or photos of three (3) tools and three (3)
equipment used in Technical Drawing.

SECTION 2
Geometric Construction

2A- Plane Geometry

Question (1) Tangency

Construct a Common External Tangent to two (2) circles of


unequal diameter 60mm and 25mm respectively. The distance
between their centres are 120mm.
a. All construction and points of tangency must be shown.

Question (2) Ellipse

Construct an Ellipse using the Concentric Circles Method where


the major axis = 80mm and minor axis = 50mm.
a. Show all point of the Ellipse
b. All construction must be shown
Question (3) Reduction and Enlargement of Plane Figures.

a. Draw the given POLYGON ABCDE in Figure 1


b. Draw a similar Polygon abcde where the sides are decreased in
the ratio 5:3

FIGURE 1

2B- Solid Geometry

Question (1) Orthographic Projection

Use figure 2 to produce the following:

a. Front Elevation
b. End Elevation
c. Plan
d. Principles of Orthographic Projection must be shown.
FIGURE 2

Question (2) Isometric Projection

Use figure 2 to produce the following:

a. Construct the Isometric Drawing in figure 2


b. All axes to be drawn.
c. Principles of Isometric Projection must be visible.
FIGURE 2
Question (3) Development

a. Draw the front Elevation and Plan of the square pyramid


shown in figure 3.
b. Draw the surface development of the square pyramid in figure 3.

FIGURE 3

You might also like