about:blank

Lab Answer Key: Module 1: Installing, upgrading, and

migrating servers and workloads

Lab: configuring Server

Exercise Server Core

Task 1: Install Windows Server 2016 Datacenter Evaluation on LON-SVR6

1 of 11 3/12/2019, 1:33 PM
 about:blank

1. In the 20740C-LON-SVR6 Virtual Machine Connection window, click the Start

icon.

2. After a moment, the setup program for Windows Server 2016 appears. On the
Enter your language and other preferences and click “Next” to continue
page of Windows Setup, click Next.

3. Install Now.

4. operating system you want select

Datacenter Evaluation

5. notices and licenses terms I accept the

license terms checkbox, and then click Next.

6. On the Which type of installation do you want? page, select Custom.

7. On the Where do you want to install Windows page, select Next.

8. page appears.

five minutes for the

9. When the installation completes, LON-SVR6 restarts. After some time, a

Command Prompt window opens and displays the following text:

must be changed before

10. Note that the Ok text line is highlighted. Press Enter.

2 of 11 3/12/2019, 1:33 PM
 about:blank

11. The Command Prompt window text changes to the following:

Enter new credentials for Administrator or hit ESC to cancel.

Below this, in the New password text line, type Pa55w.rd and then press the
password text line, press
Command Prompt window

been changed.

Note that the Ok text line is highlighted. Press Enter.

12. At this point, the Command Prompt window opens with the following prompt:

\Users\Administrator

Result: After completing this exercise, you will have successfully installed the
Windows Server 2016 Core operating system on LON-SVR6.

Exercise post-installation Server

2016

Task PowerShell and Sconfig. settings of

Server

1. In the Command Prompt window, type PowerShell, and then press Enter.

3 of 11 3/12/2019, 1:33 PM
 about:blank

2. Windows PowerShell will load, and the prompt will change to PS C:\Users
\Administrator>.

3. In the Command Prompt window, type the following, and then press Enter:

$env:computername

4. initially a randomly selected cases,

the host name.

5. Prompt window, type the press Enter:

Get-NetIPAddress | FT IPAddress

6. 172.16.0.160. This was

Server service that While you
would normally use servers

7. Prompt window, type sconfig. press Enter.

8. To select Network Settings, type 8, and then press Enter.

9. For Select Network Adapter Index#, type 1, and then press Enter.

10. On this note the four options at the bottom. Select each of the following
following values pressing Enter:

Adapter Address: Select

Address: 172.16.0.26

Enter Subnet Mask: 255.255.0.0,

4 of 11 3/12/2019, 1:33 PM
 about:blank

Enter Default Gateway: 172.16.0.1.

b. 2) Set DNS Server: Enter new preferred DNS server: 172.16.0.10, click
OK in the Network Settings pop up window, and then in Enter alternate
DNS server, press Enter.

4) Return to Main Menu.

on entering a particular change

supply the next value.

11. In the main Server Configuration window, at the Enter number to select an
option prompt, type 1, and then press Enter.

12. At the Change Domain/Workshop Membership prompt, type D for domain,

and then press Enter.

13. to join prompt, type press

14. authorized domain\user

Adatum\Administrator, and then press Enter.

15. In the Netdom.exe Command Prompt window, type Pa55w.rd and then press
Enter. Note that the password does not echo back onto the screen.

16. The Netdom.exe Command Prompt window closes and the Change
computer name dialog box appears. Click Yes

17. computer name prompt, press

18. authorized domain\user

Adatum\Administrator, and then press Enter.

5 of 11 3/12/2019, 1:33 PM
 about:blank

19. In the Netdom.exe Command Prompt window, type Pa55w.rd and then press
Enter.

20. When the Restart dialog box appears, click Yes.

21. After LON-SVR6 restarts, select the Ctrl+Alt+Delete icon in the 20740C-LON-
SVR6 computer Virtual Machine Connection window, and then the
window displays the following

for Administrator
methods Password:

Type Pa55w.rd, and then press Enter.

22. In the Command Prompt window, type PowerShell, and then press Enter.

23. window, type the Enter:

24. Note that the name LON-SVR6 displays.

25. In the Command Prompt window, type the following, and then press Enter:

Get-NetIPAddress | FT IPAddress

26. address 172.16.0.26 displays.

27. then press Enter:

Install-WindowsFeature DNS

6 of 11 3/12/2019, 1:33 PM
 about:blank

Result: After completing this exercise, you will have successfully configured the
domain and network settings of Server Core and install an additional role.

Exercise 3: Performing remote management

Task management with Server

1. Server Manager if necessary.

2. , in the navigation pane, Servers, and then

click Add Servers.

3. In the Add Servers dialog box, in the Name (CN) box, type LON-SVR6, and
then click Find Now.

4. LON-SVR6, and then and click

to the Computer list.

5. select Tools from the top select DNS.

6. Manager console.

7. In the console tree, expand Forward Lookup Zones, select and then right-click
Adatum.com, and then select Properties.

8. In Adatum.com Properties, select the Name Servers tab, and then click the
Add button.

9. Record window, qualified

text box, type LON-SVR6. then click

10. you a “The server with this IP authoritative for the

zone” message, click OK.

7 of 11 3/12/2019, 1:33 PM
 about:blank

11. In Adatum.com Properties dialog box, select the Zone Transfers tab, and
then select the Allow zone transfers check box.

12. Select the Only to servers listed in the Name Servers tab option, and then
click Notify.

13. In the Notify window, select the The Following Servers option, click in the text
and then press Enter. address will

Task 2: Add LON-SVR6 to DNS Manager on LON-DC1 and then add the
Adatum.com zone to LON-SVR6 as a secondary zone

1. In DNS Manager, in the console tree, right-click DNS, and then select Connect
DNS Server

2. Server window, select computer

type LON-SVR6, and

3. select and expand LON-SVR6

4. Select and then right-click Forward Lookup Zones, and then select New
Zone.

5. The New Zone Wizard appears. On the Welcome page, click Next.

6. select the Secondary click

7. select the Browse

8. window, double-click LON-DC1 double-click Forward

Lookup Zones. Select the Adatum.com zone, and then click OK.

8 of 11 3/12/2019, 1:33 PM
 about:blank

9. On the Zone Name page, click Next.

10. On the Master DNS Server page, in the text box, type 172.16.0.10, press
Enter, and then click Next.

11. On the Completion page, click Finish.

12. Zones in the console LON-SVR6.

with a red X.

13. select Transfer from press the F5

14. If the red X doesn’t clear, close and reopen DNS Manager on LON-DC1. You
should see the zone data resource records for Adatum.com on LON-SVR6.

Task zone information on

1.

2. Prompt window, type the press Enter:

Dnscmd /enumzones

3. Check the returned information. Note that Adatum. is listed secondary

4. window, type the Enter:

/enumzones

9 of 11 3/12/2019, 1:33 PM
 about:blank

5. Check the returned information from LON-DC1. Here the Adatum.com zone is
listed as a primary zone.

6. In the Command Prompt window, type the following, and then press Enter:

Get-DnsClientServerAddress

7. named network adapter the

8. Prompt window, type the replacing X

with the Interface Index number that you received in step 7, and then press
Enter:

Set-DnsClientServerAddress -InterfaceIndex X -ServerAddresses

16.0.10”)

9. window, type the Enter:

Get-DnsClientServerAddress

10. Both addresses should now appear in the ServerAddresses column.

Task module

After revert the virtual machines by completing

the following steps:

10 of 11 3/12/2019, 1:33 PM
 about:blank

1. On the host computer, switch to the Hyper-V Manager console.

2. In the Virtual Machines list, right-click 20740C-LON-DC1, and then click

Revert.

3. In the Revert Virtual Machine dialog box, click Revert.

4. 20740C-LON-SVR6

Result exercise, you will have Server

settings remotely.

11 of 11 3/12/2019, 1:33 PM