INTRODUCTION

SQL is divided into the following

 Data Definition Language (DDL)

 Data Manipulation Language (DML)
 Data Retrieval Language (DRL)
 Transaction Control Language (TCL)
 Data Control Language (DCL)

DDL -- create, alter, drop, truncate, rename

DML -- insert, update, delete
DRL -- select
TCL -- commit, rollback, savepoint
DCL -- grant, revoke

CREATE TABLE SYNTAX

Create table <table_name> (col1 datatype1, col2 datatype2 …coln datatypen);

Ex:
SQL> create table student (no number (2), name varchar (10), marks number (3));

INSERT

This will be used to insert the records into table.

We have two methods to insert.
 By value method
 By address method

a) USING VALUE METHOD

Syntax:
insert into <table_name) values (value1, value2, value3 …. Valuen);

Ex:
SQL> insert into student values (1, ’sudha’, 100);
SQL> insert into student values (2, ’saketh’, 200);

To insert a new record again you have to type entire insert command, if there are lot of
records this will be difficult.
This will be avoided by using address method.

b) USING ADDRESS METHOD

Syntax:
insert into <table_name) values (&col1, &col2, &col3 …. &coln);
This will prompt you for the values but for every insert you have to use forward slash.

Ex:
SQL> insert into student values (&no, '&name', &marks);

Enter value for no: 1

Enter value for name: Jagan
Enter value for marks: 300
old 1: insert into student values(&no, '&name', &marks)
new 1: insert into student values(1, 'Jagan', 300)

SQL>/
Enter value for no: 2
Enter value for name: Naren
Enter value for marks: 400
old 1: insert into student values(&no, '&name', &marks)
new 1: insert into student values(2, 'Naren', 400)

c) INSERTING DATA INTO SPECIFIED COLUMNS USING VALUE METHOD

Syntax:
insert into <table_name)(col1, col2, col3 … Coln) values (value1, value2, value3 ….
Valuen);
Ex:
SQL> insert into student (no, name) values (3, ’Ramesh’);
SQL> insert into student (no, name) values (4, ’Madhu’);

d) INSERTING DATA INTO SPECIFIED COLUMNS USING ADDRESS METHOD

Syntax:
insert into <table_name)(col1, col2, col3 … coln) values (&col1, &col2 ….&coln);
This will prompt you for the values but for every insert you have to use forward slash.

Ex:
SQL> insert into student (no, name) values (&no, '&name');
Enter value for no: 5
Enter value for name: Visu
old 1: insert into student (no, name) values(&no, '&name')
new 1: insert into student (no, name) values(5, 'Visu')

SQL>/
Enter value for no: 6
Enter value for name: Rattu
old 1: insert into student (no, name) values(&no, '&name')
new 1: insert into student (no, name) values(6, 'Rattu')

SELECTING DATA

Syntax:
Select * from <table_name>; -- here * indicates all columns
or
Select col1, col2, … coln from <table_name>;

Ex:
SQL> select * from student;

NO NAME MARKS
--- ------ --------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

SQL> select no, name, marks from student;

NO NAME MARKS
--- ------ --------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu
 SQL> select no, name from student;

NO NAME
--- -------
1 Sudha
2 Saketh
1 Jagan
2 Naren
3 Ramesh
4 Madhu
5 Visu
6 Rattu

CONDITIONAL SELECTIONS AND OPERATORS

We have two clauses used in this
 Where
 Order by

USING WHERE

Syntax:
select * from <table_name> where <condition>;

the following are the different types of operators used in where clause.

 Arithmetic operators
 Comparison operators
 Logical operators

 Arithmetic operators -- highest precedence

+, -, *, /
 Comparison operators
 =, !=, >, <, >=, <=, <>
 between, not between
 in, not in
 null, not null
 like
 Logical operators
 And
 Or -- lowest precedence
 not

a) USING =, >, <, >=, <=, !=, <>

Ex:
SQL> select * from student where no = 2;

NO NAME MARKS
--- ------- ---------
2 Saketh 200
2 Naren 400

SQL> select * from student where no < 2;

NO NAME MARKS
--- ------- ----------
1 Sudha 100
1 Jagan 300

SQL> select * from student where no > 2;

NO NAME MARKS
--- ------- ----------
3 Ramesh
 4 Madhu
5 Visu
6 Rattu

SQL> select * from student where no <= 2;

NO NAME MARKS
--- ------- ----------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400

SQL> select * from student where no >= 2;

NO NAME MARKS
--- ------- ---------
2 Saketh 200
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

SQL> select * from student where no != 2;

NO NAME MARKS
--- ------- ----------
1 Sudha 100
1 Jagan 300
3 Ramesh
4 Madhu
5 Visu
6 Rattu

SQL> select * from student where no <> 2;

NO NAME MARKS
--- ------- ----------
1 Sudha 100
1 Jagan 300
3 Ramesh
4 Madhu
5 Visu
6 Rattu

b) USING AND

This will gives the output when all the conditions become true.

Syntax:
select * from <table_name> where <condition1> and <condition2> and ..
<conditionn>;
Ex:
SQL> select * from student where no = 2 and marks >= 200;

NO NAME MARKS
--- ------- --------
2 Saketh 200
2 Naren 400

c) USING OR

This will gives the output when either of the conditions become true.
 Syntax:
select * from <table_name> where <condition1> and <condition2> or ..
<conditionn>;
Ex:
SQL> select * from student where no = 2 or marks >= 200;

NO NAME MARKS
--- ------- ---------
2 Saketh 200
1 Jagan 300
2 Naren 400

d) USING BETWEEN

This will gives the output based on the column and its lower bound, upperbound.

Syntax:
select * from <table_name> where <col> between <lower bound> and <upper
bound>;

Ex:
SQL> select * from student where marks between 200 and 400;

NO NAME MARKS
--- ------- ---------
2 Saketh 200
1 Jagan 300
2 Naren 400

e) USING NOT BETWEEN

This will gives the output based on the column which values are not in its lower bound,
upperbound.

Syntax:
select * from <table_name> where <col> not between <lower bound> and <upper
bound>;
Ex:
SQL> select * from student where marks not between 200 and 400;

NO NAME MARKS
--- ------- ---------
1 Sudha 100

f) USING IN

This will gives the output based on the column and its list of values specified.

Syntax:
select * from <table_name> where <col> in ( value1, value2, value3 … valuen);

Ex:
SQL> select * from student where no in (1, 2, 3);

NO NAME MARKS
--- ------- ---------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh

g) USING NOT IN

This will gives the output based on the column which values are not in the list of
 values specified.

Syntax:
select * from <table_name> where <col> not in ( value1, value2, value3 … valuen);

Ex:
SQL> select * from student where no not in (1, 2, 3);

NO NAME MARKS
--- ------- ---------
4 Madhu
5 Visu
6 Rattu

h) USING NULL

This will gives the output based on the null values in the specified column.

Syntax:
select * from <table_name> where <col> is null;

Ex:
SQL> select * from student where marks is null;

NO NAME MARKS
--- ------- ---------
3 Ramesh
4 Madhu
5 Visu
6 Rattu

i) USING NOT NULL

This will gives the output based on the not null values in the specified column.

Syntax:
select * from <table_name> where <col> is not null;

Ex:
SQL> select * from student where marks is not null;
NO NAME MARKS
--- ------- ---------
1 Sudha 100
2 Saketh 200
1 Jagan 300
2 Naren 400

j) USING LIKE

This will be used to search through the rows of database column based on the pattern
you specify.

Syntax:
select * from <table_name> where <col> like <pattern>;

Ex:
i) This will give the rows whose marks are 100.

SQL> select * from student where marks like 100;

NO NAME MARKS
--- ------- ---------
1 Sudha 100
ii) This will give the rows whose name start with ‘S’.
 SQL> select * from student where name like 'S%';

NO NAME MARKS
--- ------- ---------
1 Sudha 100
2 Saketh 200

iii) This will give the rows whose name ends with ‘h’.

SQL> select * from student where name like '%h';

NO NAME MARKS
--- ------- ---------
2 Saketh 200
3 Ramesh

iV) This will give the rows whose name’s second letter start with ‘a’.

SQL> select * from student where name like '_a%';

NO NAME MARKS
--- ------- --------
2 Saketh 200
1 Jagan 300
2 Naren 400
3 Ramesh
4 Madhu
6 Rattu

V) This will give the rows whose name’s third letter start with ‘d’.

SQL> select * from student where name like '__d%';

NO NAME MARKS
--- ------- ---------
1 Sudha 100
4 Madhu

Vi) This will give the rows whose name’s second letter start with ‘t’ from ending.

SQL> select * from student where name like '%_t%';

NO NAME MARKS
--- ------- ---------
2 Saketh 200
6 Rattu

Vii) This will give the rows whose name’s third letter start with ‘e’ from ending.

SQL> select * from student where name like '%e__%';

NO NAME MARKS
--- ------- ---------
2 Saketh 200
3 Ramesh

Viii) This will give the rows whose name cotains 2 a’s.

SQL> select * from student where name like '%a% a %';

NO NAME MARKS
--- ------- ----------
1 Jagan 300

* You have to specify the patterns in like using underscore ( _ ).

USING ORDER BY

This will be used to ordering the columns data (ascending or descending).

Syntax:
Select * from <table_name> order by <col> desc;
By default oracle will use ascending order.
If you want output in descending order you have to use desc keyword after the column.

Ex:
SQL> select * from student order by no;

NO NAME MARKS
--- ------- ---------
1 Sudha 100
1 Jagan 300
2 Saketh 200
2 Naren 400
3 Ramesh
4 Madhu
5 Visu
6 Rattu

SQL> select * from student order by no desc;

NO NAME MARKS
--- ------- ---------
6 Rattu
5 Visu
4 Madhu
3 Ramesh
2 Saketh 200
2 Naren 400
1 Sudha 100
1 Jagan 300

USING DML

USING UPDATE

This can be used to modify the table data.

Syntax:
Update <table_name> set <col1> = value1, <col2> = value2 where <condition>;

Ex:
SQL> update student set marks = 500;
If you are not specifying any condition this will update entire table.

SQL> update student set marks = 500 where no = 2;

SQL> update student set marks = 500, name = 'Venu' where no = 1;

USING DELETE

This can be used to delete the table data temporarily.

Syntax:
Delete <table_name> where <condition>;

Ex:
SQL> delete student;
 If you are not specifying any condition this will delete entire table.

SQL> delete student where no = 2;

USING DDL
USING ALTER

This can be used to add or remove columns and to modify the precision of the datatype.

a) ADDING COLUMN

Syntax:
alter table <table_name> add <col datatype>;

Ex:
SQL> alter table student add sdob date;

b) REMOVING COLUMN

Syntax:
alter table <table_name> drop <col datatype>;

Ex:
SQL> alter table student drop column sdob;

c) INCREASING OR DECREASING PRECISION OF A COLUMN

Syntax:
alter table <table_name> modify <col datatype>;
Ex:
SQL> alter table student modify marks number(5);

* To decrease precision the column should be empty.

d) MAKING COLUMN UNUSED

Syntax:
alter table <table_name> set unused column <col>;
Ex:
SQL> alter table student set unused column marks;

Even though the column is unused still it will occupy memory.

d) DROPPING UNUSED COLUMNS

Syntax:
alter table <table_name> drop unused columns;

Ex:
SQL> alter table student drop unused columns;
* You can not drop individual unused columns of a table.

e) RENAMING COLUMN

Syntax:
alter table <table_name> rename column <old_col_name> to <new_col_name>;

Ex:
SQL> alter table student rename column marks to smarks;
USING TRUNCATE

This can be used to delete the entire table data permanently.

Syntax:
truncate table <table_name>;

Ex:
SQL> truncate table student;

USING DROP

This will be used to drop the database object;

Syntax:
Drop table <table_name>;

Ex:
SQL> drop table student;

USING RENAME

This will be used to rename the database object;

Syntax:
rename <old_table_name> to <new_table_name>;

Ex:
SQL> rename student to stud;

USING TCL
USING COMMIT

This will be used to save the work.

Commit is of two types.
 Implicit
 Explicit

a) IMPLICIT

This will be issued by oracle internally in two situations.

 When any DDL operation is performed.
 When you are exiting from SQL * PLUS.

b) EXPLICIT

This will be issued by the user.

Syntax:
Commit or commit work;
 * When ever you committed then the transaction was completed.

USING ROLLBACK

This will undo the operation.

This will be applied in two methods.
 Upto previous commit
 Upto previous rollback

Syntax:
Roll or roll work;
Or
Rollback or rollback work;
* While process is going on, if suddenly power goes then oracle will rollback the transaction.
USING SAVEPOINT

You can use savepoints to rollback portions of your current set of transactions.

Syntax:
Savepoint <savepoint_name>;

Ex:
SQL> savepoint s1;
SQL> insert into student values(1, ‘a’, 100);
SQL> savepoint s2;
SQL> insert into student values(2, ‘b’, 200);
SQL> savepoint s3;
SQL> insert into student values(3, ‘c’, 300);
SQL> savepoint s4;
SQL> insert into student values(4, ‘d’, 400);

Before rollback

SQL> select * from student;

NO NAME MARKS
--- ------- ----------
1 a 100
2 b 200
3 c 300
4 d 400

SQL> rollback to savepoint s3;

Or
SQL> rollback to s3;

This will rollback last two records.

SQL> select * from student;

NO NAME MARKS
--- ------- ----------
1 a 100
2 b 200

USING DCL

DCL commands are used to granting and revoking the permissions.

USING GRANT

This is used to grant the privileges to other users.

Syntax:
 Grant <privileges> on <object_name> to <user_name> [with grant option];

Ex:
SQL> grant select on student to sudha; -- you can give individual privilege
SQL> grant select, insert on student to sudha; -- you can give set of privileges
SQL> grant all on student to sudha; -- you can give all privileges

The sudha user has to use dot method to access the object.
SQL> select * from saketh.student;
The sudha user can not grant permission on student table to other users. To get this
type of option use the following.
SQL> grant all on student to sudha with grant option;
Now sudha user also grant permissions on student table.

USING REVOKE

This is used to revoke the privileges from the users to which you granted the privileges.

Syntax:
Revoke <privileges> on <object_name> from <user_name>;

Ex:
SQL> revoke select on student form sudha; -- you can revoke individual privilege
SQL> revoke select, insert on student from sudha; -- you can revoke set of privileges
SQL> revoke all on student from sudha; -- you can revoke all privileges

USING ALIASES
CREATE WITH SELECT

We can create a table using existing table [along with data].

Syntax:
Create table <new_table_name> [col1, col2, col3 ... coln] as select * from
<old_table_name>;
Ex:
SQL> create table student1 as select * from student;

Creating table with your own column names.

SQL>create table student2(sno, sname, smarks) as select * from student;

Creating table with specified columns.

SQL> create table student3 as select no,name from student;

Creating table with out table data.

SQL> create table student2(sno, sname, smarks) as select * from student where 1 = 2;
In the above where clause give any condition which does not satisfy.

INSERT WITH SELECT

Using this we can insert existing table data to a another table in a single trip. But the table structure should be same.

Syntax:
Insert into <table1> select * from <table2>;

Ex:
SQL> insert into student1 select * from student;

Inserting data into specified columns

SQL> insert into student1(no, name) select no, name from student;

COLUMN ALIASES

Syntax:
 Select <orginal_col> <alias_name> from <table_name>;

Ex:
SQL> select no sno from student;
or
SQL> select no “sno” from student;

TABLE ALIASES

If you are using table aliases you can use dot method to the columns.

Syntax:
Select <alias_name>.<col1>, <alias_name>.<col2> … <alias_name>.<coln> from
<table_name> <alias_name>;
Ex:
SQL> select s.no, s.name from student s;

USING MERGE
MERGE

You can use merge command to perform insert and update in a single command.

Ex:

SQL> Merge into student1 s1

Using (select *From student2) s2
On(s1.no=s2.no)
When matched then
Update set marks = s2.marks
When not matched then
Insert (s1.no,s1.name,s1.marks)
Values(s2.no,s2.name,s2.marks);

In the above the two tables are with the same structure but we can merge different structured tables also but the datatype of the
columns should match.

Assume that student1 has columns like no,name,marks and student2 has columns like no,
name, hno, city.

SQL> Merge into student1 s1

Using (select *From student2) s2
On(s1.no=s2.no)
When matched then
Update set marks = s2.hno
 When not matched then
Insert (s1.no,s1.name,s1.marks)
Values(s2.no,s2.name,s2.hno);

MULTIBLE INSERTS
We have table called DEPT with the following columns and data

DEPTNO DNAME LOC

-------- -------- ----
10 accounting new york
20 research dallas
30 sales Chicago
40 operations boston

a) CREATE STUDENT TABLE

SQL> Create table student(no number(2),name varchar(2),marks number(3));

b) MULTI INSERT WITH ALL FIELDS

SQL> Insert all

Into student values(1,’a’,100)
Into student values(2,’b’,200)
Into student values(3,’c’,300)
Select *from dept where deptno=10;

-- This inserts 3 rows

c) MULTI INSERT WITH SPECIFIED FIELDS

SQL> insert all

Into student (no,name) values(4,’d’)
Into student(name,marks) values(’e’,400)
Into student values(3,’c’,300)
Select *from dept where deptno=10;

-- This inserts 3 rows

d) MULTI INSERT WITH DUPLICATE ROWS

SQL> insert all

Into student values(1,’a’,100)
Into student values(2,’b’,200)
Into student values(3,’c’,300)
Select *from dept where deptno > 10;

-- This inserts 9 rows because in the select statement retrieves 3 records (3 inserts for
each row retrieved)

e) MULTI INSERT WITH CONDITIONS BASED

SQL> Insert all

When deptno > 10 then
Into student1 values(1,’a’,100)
When dname = ‘SALES’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Select *from dept where deptno>10;

-- This inserts 4 rows because the first condition satisfied 3 times, second condition
satisfied once and the last none.

f) MULTI INSERT WITH CONDITIONS BASED AND ELSE

 SQL> Insert all
When deptno > 100 then
Into student1 values(1,’a’,100)
When dname = ‘S’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Else
Into student values(4,’d’,400)
Select *from dept where deptno>10;

-- This inserts 3 records because the else satisfied 3 times

g) MULTI INSERT WITH CONDITIONS BASED AND FIRST

SQL> Insert first

When deptno = 20 then
Into student1 values(1,’a’,100)
When dname = ‘RESEARCH’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Select *from dept where deptno=20;

-- This inserts 1 record because the first clause avoid to check the remaining
conditions once the condition is satisfied.

h) MULTI INSERT WITH CONDITIONS BASED, FIRST AND ELSE

SQL> Insert first

When deptno = 30 then
Into student1 values(1,’a’,100)
When dname = ‘R’ then
Into student2 values(2,’b’,200)
When loc = ‘NEW YORK’ then
Into student3 values(3,’c’,300)
Else
Into student values(4,’d’,400)
Select *from dept where deptno=20;

-- This inserts 1 record because the else clause satisfied once

i) MULTI INSERT WITH MULTIBLE TABLES

SQL> Insert all

Into student1 values(1,’a’,100)
Into student2 values(2,’b’,200)
Into student3 values(3,’c’,300)
Select *from dept where deptno=10;

-- This inserts 3 rows

** You can use multi tables with specified fields, with duplicate rows, with conditions,
with first and else clauses.

FUNCTIONS
Functions can be categorized as follows.

 Single row functions

 Group functions

SINGLE ROW FUNCTIONS

Single row functions can be categorized into five. These will be applied for each row and produces individual output for each row.

 Numeric functions
 String functions
 Date functions
 Miscellaneous functions
 Conversion functions

NUMERIC FUNCTIONS
 Abs
 Sign
 Sqrt
 Mod
 Nvl
 Power
 Exp
 Ln
 Log
 Ceil
 Floor
 Round
 Trunk
 Bitand
 Greatest
 Least
 Coalesce
a) ABS

Absolute value is the measure of the magnitude of value.

Absolute value is always a positive number.

Syntax: abs (value)

Ex:
SQL> select abs(5), abs(-5), abs(0), abs(null) from dual;

ABS(5) ABS(-5) ABS(0) ABS(NULL)

---------- ---------- ---------- -------------
5 -5 0

b) SIGN

Sign gives the sign of a value.

Syntax: sign (value)

Ex:
SQL> select sign(5), sign(-5), sign(0), sign(null) from dual;

SIGN(5) SIGN(-5) SIGN(0) SIGN(NULL)

---------- ---------- ---------- --------------
1 -1 0

c) SQRT

This will give the square root of the given value.

Syntax: sqrt (value) -- here value must be positive.

Ex:
SQL> select sqrt(4), sqrt(0), sqrt(null), sqrt(1) from dual;
SQRT(4) SQRT(0) SQRT(NULL) SQRT(1)
---------- ---------- --------------- ----------
2 0 1
d) MOD

This will give the remainder.

Syntax: mod (value, divisor)

Ex:
SQL> select mod(7,4), mod(1,5), mod(null,null), mod(0,0), mod(-7,4) from dual;

MOD(7,4) MOD(1,5) MOD(NULL,NULL) MOD(0,0) MOD(-7,4)

------------ ---------- --------------------- ----------- -------------
3 1 0 -3

e) NVL

This will substitutes the specified value in the place of null values.

Syntax: nvl (null_col, replacement_value)

Ex:
SQL> select * from student; -- here for 3rd row marks value is null

NO NAME MARKS
--- ------- ---------
1 a 100
2 b 200
3 c

SQL> select no, name, nvl(marks,300) from student;

NO NAME NVL(MARKS,300)
--- ------- ---------------------
1 a 100
2 b 200
3 c 300

SQL> select nvl(1,2), nvl(2,3), nvl(4,3), nvl(5,4) from dual;

NVL(1,2) NVL(2,3) NVL(4,3) NVL(5,4)

---------- ---------- ---------- ----------
1 2 4 5

SQL> select nvl(0,0), nvl(1,1), nvl(null,null), nvl(4,4) from dual;

NVL(0,0) NVL(1,1) NVL(null,null) NVL(4,4)

---------- ---------- ----------------- ----------
0 1 4

f) POWER

Power is the ability to raise a value to a given exponent.

Syntax: power (value, exponent)

Ex:
SQL> select power(2,5), power(0,0), power(1,1), power(null,null), power(2,-5)
from dual;

POWER(2,5) POWER(0,0) POWER(1,1) POWER(NULL,NULL) POWER(2,-5)

-------------- -------------- ----- --------- ----------------------- ---------------
32 1 1 .03125

g) EXP
 This will raise e value to the give power.

Syntax: exp (value)

Ex:
SQL> select exp(1), exp(2), exp(0), exp(null), exp(-2) from dual;

EXP(1) EXP(2) EXP(0) EXP(NULL) EXP(-2)

-------- --------- -------- ------------- ----------
2.71828183 7.3890561 1 .135335283

h) LN

This is based on natural or base e logarithm.

Syntax: ln (value) -- here value must be greater than zero which is positive only.

Ex:
SQL> select ln(1), ln(2), ln(null) from dual;

LN(1) LN(2) LN(NULL)

------- ------- ------------
0 .693147181

Ln and Exp are reciprocal to each other.

EXP (3) = 20.0855369
LN (20.0855369) = 3

i) LOG

This is based on 10 based logarithm.

Syntax: log (10, value) -- here value must be greater than zero which is positive only.

Ex:
SQL> select log(10,100), log(10,2), log(10,1), log(10,null) from dual;

LOG(10,100) LOG(10,2) LOG(10,1) LOG(10,NULL)

--------------- ----------- ------------ -----------------
2 .301029996 0

LN (value) = LOG (EXP(1), value)

SQL> select ln(3), log(exp(1),3) from dual;

LN(3) LOG(EXP(1),3)
------- -----------------
1.09861229 1.09861229

j) CEIL

This will produce a whole number that is greater than or equal to the specified value.

Syntax: ceil (value)

Ex:
SQL> select ceil(5), ceil(5.1), ceil(-5), ceil( -5.1), ceil(0), ceil(null) from dual;

CEIL(5) CEIL(5.1) CEIL(-5) CEIL(-5.1) CEIL(0) CEIL(NULL)

--------- ----------- ---------- ------------ -------- --------------
5 6 -5 -5 0
k) FLOOR

This will produce a whole number that is less than or equal to the specified value.

Syntax: floor (value)

 Ex:
SQL> select floor(5), floor(5.1), floor(-5), floor( -5.1), floor(0), floor(null) from
dual;

FLOOR(5) FLOOR(5.1) FLOOR(-5) FLOOR(-5.1) FLOOR(0) FLOOR(NULL)

----------- ------------- ------------ -------------- ----------- ----------------
5 5 -5 -6 0
l) ROUND

This will rounds numbers to a given number of digits of precision.

Syntax: round (value, precision)

Ex:
SQL> select round(123.2345), round(123.2345,2), round(123.2354,2) from dual;

ROUND(123.2345) ROUND(123.2345,0) ROUND(123.2345,2) ROUND(123.2354,2)

--------------------- ------------------------ ----------------------- -----------------------
123 123 123.23 123.24

SQL> select round(123.2345,-1), round(123.2345,-2), round(123.2345,-3),

round(123.2345,-4) from dual;

ROUND(123.2345,-1) ROUND(123.2345,-2) ROUND(123.2345,-3) ROUND(123.2345,-4)

------------------------ ------------------------- ------------------------ ------------------------
120 100 0 0

SQL> select round(123,0), round(123,1), round(123,2) from dual;

ROUND(123,0) ROUND(123,1) ROUND(123,2)

----------------- ----------------- ----------------
123 123 123

SQL> select round(-123,0), round(-123,1), round(-123,2) from dual;

ROUND(-123,0) ROUND(-123,1) ROUND(-123,2)

------------------ ----------------- -------------------
-123 -123 -123

SQL> select round(123,-1), round(123,-2), round(123,-3), round(-123,-1), round(

-123,-2), round(-123,-3) from dual;

ROUND(123,-1) ROUND(123,-2) ROUND(123,-3) ROUND(-123,-1) ROUND(-123,-2)

ROUND(-123,-3)
------------- ------------- ------------- -------------- -------------- --------------------------
120 100 0 -120 -100 0

SQL> select round(null,null), round(0,0), round(1,1), round(-1,-1), round(-2,-2)

from dual;

ROUND(NULL,NULL) ROUND(0,0) ROUND(1,1) ROUND(-1,-1) ROUND(-2,-2)

----------------------- -------------- -------------- ---------------- ----------------
0 1 0 0

m) TRUNC

This will truncates or chops off digits of precision from a number.

Syntax: trunc (value, precision)

Ex:
SQL> select trunc(123.2345), trunc(123.2345,2), trunc(123.2354,2) from dual;

TRUNC(123.2345) TRUNC(123.2345,2) TRUNC(123.2354,2)

--------------------- ----------------------- -----------------------
123 123.23 123.23

SQL> select trunc(123.2345,-1), trunc(123.2345,-2), trunc(123.2345,-3),

trunc(123.2345,-4) from dual;

TRUNC(123.2345,-1) TRUNC(123.2345,-2) TRUNC(123.2345,-3) TRUNC(123.2345,-4)

------------------------ ------------------------ ----------------------- ------------------------
120 100 0 0

SQL> select trunc(123,0), trunc(123,1), trunc(123,2) from dual;

TRUNC(123,0) TRUNC(123,1) TRUNC(123,2)

---------------- ---------------- -----------------
123 123 123

SQL> select trunc(-123,0), trunc(-123,1), trunc(-123,2) from dual;

TRUNC(-123,0) TRUNC(-123,1) TRUNC(-123,2)

----------------- ----------------- -----------------
-123 -123 -123

SQL> select trunc(123,-1), trunc(123,-2), trunc(123,-3), trunc(-123,-1), trunc(

-123,2), trunc(-123,-3) from dual;

TRUNC(123,-1) TRUNC(123,-2) TRUNC(123,-3) TRUNC(-123,-1) TRUNC(-123,2) TRUNC(-

123,-3)
------------- ------------- ------------- -------------- ------------- ---------------------------------
120 100 0 -120 -123 0

SQL> select trunc(null,null), trunc(0,0), trunc(1,1), trunc(-1,-1), trunc(-2,-2) from

dual;

TRUNC(NULL,NULL) TRUNC(0,0) TRUNC(1,1) TRUNC(-1,-1) TRUNC(-2,-2)

----------------------- ------------- ------------- --------------- ----------------
0 1 0 0

n) BITAND

This will perform bitwise and operation.

Syntax: bitand (value1, value2)

Ex:
SQL>select bitand(2,3), bitand(0,0), bitand(1,1), bitand(null,null), bitand(-2,-3)
from dual;
BITAND(2,3) BITAND(0,0) BITAND(1,1) BITAND(NULL,NULL) BITAND(-2,-3)
-------------- --------------- -------------- ------------------------ -----------------
2 0 1 -4

o) GREATEST

This will give the greatest number.

Syntax: greatest (value1, value2, value3 … valuen)

Ex:
SQL> select greatest(1, 2, 3), greatest(-1, -2, -3) from dual;

GREATEST(1,2,3) GREATEST(-1,-2,-3)
-------------------- -----------------------
3 -1
 If all the values are zeros then it will display zero.
 If all the parameters are nulls then it will display nothing.
 If any of the parameters is null it will display nothing.

p) LEAST

This will give the least number.

Syntax: least (value1, value2, value3 … valuen)

Ex:
SQL> select least(1, 2, 3), least(-1, -2, -3) from dual;

LEAST(1,2,3) LEAST(-1,-2,-3)
-------------------- -----------------------
1 -3
 If all the values are zeros then it will display zero.
 If all the parameters are nulls then it will display nothing.
 If any of the parameters is null it will display nothing.
q) COALESCE

This will return first non-null value.

Syntax: coalesce (value1, value2, value3 … valuen)

Ex:
SQL> select coalesce(1,2,3), coalesce(null,2,null,5) from dual;

COALESCE(1,2,3) COALESCE(NULL,2,NULL,5)
------------------- -------------------------------
1 2
STRING FUNCTIONS

 Initcap
 Upper
 Lower
 Length
 Rpad
 Lpad
 Ltrim
 Rtrim
 Trim
 Translate
 Replace
 Soundex
 Concat ( ‘ || ‘ Concatenation operator)
 Ascii
 Chr
 Substr
 Instr
 Decode
 Greatest
 Least
 Coalesce
a) INITCAP

This will capitalize the initial letter of the string.

Syntax: initcap (string)

Ex:
SQL> select initcap('computer') from dual;

INITCAP
-----------
Computer

b) UPPER

This will convert the string into uppercase.

Syntax: upper (string)

Ex:
SQL> select upper('computer') from dual;
UPPER
-----------
COMPUTER

c) LOWER

This will convert the string into lowercase.

Syntax: lower (string)

Ex:
SQL> select lower('COMPUTER') from dual;

LOWER
-----------
computer

d) LENGTH

This will give length of the string.

Syntax: length (string)

Ex:
SQL> select length('computer') from dual;

LENGTH
-----------
8

e) RPAD

This will allows you to pad the right side of a column with any set of characters.

Syntax: rpad (string, length [, padding_char])

Ex:
SQL> select rpad('computer',15,'*'), rpad('computer',15,'*#') from dual;

RPAD('COMPUTER' RPAD('COMPUTER'
---------------------- ----------------------
computer******* computer*#*#*#*

-- Default padding character was blank space.

f) LPAD

This will allows you to pad the left side of a column with any set of characters.
Syntax: lpad (string, length [, padding_char])

Ex:
SQL> select lpad('computer',15,'*'), lpad('computer',15,'*#') from dual;

LPAD('COMPUTER' LPAD('COMPUTER'
--------------------- ---------------------
*******computer *#*#*#*computer

-- Default padding character was blank space.

g) LTRIM

This will trim off unwanted characters from the left end of string.

Syntax: ltrim (string [,unwanted_chars])

Ex:
SQL> select ltrim('computer','co'), ltrim('computer','com') from dual;

LTRIM( LTRIM
-------- ---------
mputer puter

SQL> select ltrim('computer','puter'), ltrim('computer','omputer') from dual;

LTRIM('C LTRIM('C
---------- ----------
computer computer

-- If you haven’t specify any unwanted characters it will display entire string.

h) RTRIM

This will trim off unwanted characters from the right end of string.
Syntax: rtrim (string [, unwanted_chars])

Ex:
SQL> select rtrim('computer','er'), rtrim('computer','ter') from dual;
RTRIM( RTRIM
-------- ---------
comput compu

SQL> select rtrim('computer','comput’), rtrim('computer','compute') from dual;

RTRIM('C RTRIM('C
---------- ----------
computer computer
-- If you haven’t specify any unwanted characters it will display entire string.

i) TRIM

This will trim off unwanted characters from the both sides of string.

Syntax: trim (unwanted_chars from string)

Ex:
SQL> select trim( 'i' from 'indiani') from dual;

TRIM(
-----
ndian

SQL> select trim( leading'i' from 'indiani') from dual; -- this will work as LTRIM

TRIM(L
------
ndiani

SQL> select trim( trailing'i' from 'indiani') from dual; -- this will work as RTRIM
TRIM(T
------
Indian

j) TRANSLATE

This will replace the set of characters, character by character.

Syntax: translate (string, old_chars, new_chars)

Ex:
SQL> select translate('india','in','xy') from dual;

TRANS
--------
xydxa

k) REPLACE

This will replace the set of characters, string by string.

Syntax: replace (string, old_chars [, new_chars])

Ex:
SQL> select replace('india','in','xy'), replace(‘india’,’in’) from dual;

REPLACE REPLACE
----------- -----------
Xydia dia

l) SOUNDEX

This will be used to find words that sound like other words, exclusively used in where
clause.
Syntax: soundex (string)

Ex:
SQL> select * from emp where soundex(ename) = soundex('SMIT');

EMPNO ENAME JOB MGR HIREDATE SAL DEPTNO

-------- -------- ----- ----- ------------ --------- ----------
7369 SMITH CLERK 7902 17-DEC-80 500 20

m) CONCAT

This will be used to combine two strings only.

Syntax: concat (string1, string2)

Ex:
SQL> select concat('computer',' operator') from dual;

CONCAT('COMPUTER'
-------------------------
computer operator

If you want to combine more than two strings you have to use concatenation
operator(||).

SQL> select 'how' || ' are' || ' you' from dual;

'HOW'||'ARE
---------------
how are you
n) ASCII

This will return the decimal representation in the database character set of the first
character of the string.

Syntax: ascii (string)

Ex:
SQL> select ascii('a'), ascii('apple') from dual;

ASCII('A') ASCII('APPLE')
------------ ------------------
97 97

o) CHR

This will return the character having the binary equivalent to the string in either the
database character set or the national character set.

Syntax: chr (number)

Ex:
SQL> select chr(97) from dual;

CHR
-----
a

p) SUBSTR

This will be used to extract substrings.

Syntax: substr (string, start_chr_count [, no_of_chars])

Ex:
SQL> select substr('computer',2), substr('computer',2,5), substr('computer',3,7)
from dual;

SUBSTR( SUBST SUBSTR

---------- ------- --------
omputer omput mputer

 If no_of_chars parameter is negative then it will display nothing.

 If both parameters except string are null or zeros then it will display nothing.
 If no_of_chars parameter is greater than the length of the string then it ignores and calculates based on the orginal
string length.
 If start_chr_count is negative then it will extract the substring from right end.

1 2 3 4 5 6 7 8

C O M P U T E R

-8 -7 -6 -5 -4 -3 -2 -1

q) INSTR

This will allows you for searching through a string for set of characters.

Syntax: instr (string, search_str [, start_chr_count [, occurrence] ])

Ex:
SQL> select instr('information','o',4,1), instr('information','o',4,2) from dual;
INSTR('INFORMATION','O',4,1) INSTR('INFORMATION','O',4,2)
------------------------------------ -------------------------------------
4 10

 If you are not specifying start_chr_count and occurrence then it will start
search from the beginning and finds first occurrence only.
 If both parameters start_chr_count and occurrence are null, it will display
nothing.

r) DECODE

Decode will act as value by value substitution.

For every value of field, it will checks for a match in a series of if/then tests.

Syntax: decode (value, if1, then1, if2, then2, ……. else);

Ex:
SQL> select sal, decode(sal,500,'Low',5000,'High','Medium') from emp;

SAL DECODE
----- ---------
500 Low
2500 Medium
2000 Medium
3500 Medium
3000 Medium
5000 High
4000 Medium
5000 High
1800 Medium
1200 Medium
2000 Medium
2700 Medium
2200 Medium
3200 Medium

SQL> select decode(1,1,3), decode(1,2,3,4,4,6) from dual;

DECODE(1,1,3) DECODE(1,2,3,4,4,6)
----------------- ------------------------
3 6

 If the number of parameters are odd and different then decode will display
nothing.
 If the number of parameters are even and different then decode will display last
value.
 If all the parameters are null then decode will display nothing.
 If all the parameters are zeros then decode will display zero.

s) GREATEST

This will give the greatest string.

Syntax: greatest (strng1, string2, string3 … stringn)

Ex:
SQL> select greatest('a', 'b', 'c'), greatest('satish','srinu','saketh') from dual;

GREAT GREAT
------- -------
c srinu

 If all the parameters are nulls then it will display nothing.

 If any of the parameters is null it will display nothing.

t) LEAST

This will give the least string.

Syntax: greatest (strng1, string2, string3 … stringn)

Ex:
SQL> select least('a', 'b', 'c'), least('satish','srinu','saketh') from dual;

LEAST LEAST
------- -------
a saketh

 If all the parameters are nulls then it will display nothing.

 If any of the parameters is null it will display nothing.

u) COALESCE

This will gives the first non-null string.

Syntax: coalesce (strng1, string2, string3 … stringn)

Ex:
SQL> select coalesce('a','b','c'), coalesce(null,'a',null,'b') from dual;

COALESCE COALESCE
----------- -----------
a a