Scribd
Upload
11 views2 pages

MCP DOWNLOADe XP

This document provides a step-by-step guide for downloading the MCP application using the RDCON utility on a Windows XP operating system. It includes instructions for formatting a USB stick, creating a boot disk, and executing commands in DOS to install the MCP application. Troubleshooting tips are also provided in case the target is not found during the process.

Uploaded by

Roger Vicente
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
11 views2 pages

MCP DOWNLOADe XP

This document provides a step-by-step guide for downloading the MCP application using the RDCON utility on a Windows XP operating system. It includes instructions for formatting a USB stick, creating a boot disk, and executing commands in DOS to install the MCP application. Troubleshooting tips are also provided in case the target is not found during the process.

Uploaded by

Roger Vicente
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

MCP DOWNLOAD WITH RDCON Operating system Windows XP

- USB Stick FAT formatting.


- Store Ferag application e.g MCP LAT204 to external drive E: USB - Stick
Fix connection PC COM1 to MCP X7
- Create RDCON boot disc by using the following prog. RDCON mit USB.EXE
- Shut down PC.
- Insert RDCON boot disk into drive A: and restart PC again. ( Ignore error messages )
- Select interface 2.D600 Notebook
Wait unless DOS - prompt A:\> appears
- Switch on MCP
- Start A:\> RDCON
Wait news
( RDCON i80386ex DP-RAM CON-I/O Utility V1.0
©1993 Software K.Haus AG, CH-5702 Niederlenz
Target found.
[If target found not appear. MCP OFF and ON again. If you can see first characters on screen interrupt
with ESC. Continue unless Target Found appears.]

Abort with L-Shift + R-Shift + ESC )


- Enter OUTMODE 3 ( It is not visible on screen )
News
( Output mode: console ON, panel ON
386EX C:\> )
- Change to drive E  e:
(386EX E:\>) ( If you have problems wit drive E change USB Stick and try again )
- dir
Volume in drive E is ( for example Kingston )
Directory of E:
- Select file  e.g. cd MCPAB204
(386EX E:\>MCPLAT204)
- dir
Volume drive E is KINGSTON
Directory of E:\MCPLAT204
- 386EX E:\MCP LAT  cd EXPORT
(386EX E:\MCP LAT 204\EXPORT)
- dir
Volume in drive E is KINGSTON
Directory of E:\MCP LAT\EXPORT
- Select file
-  INSTALL
Carry out download
- Wait information

27file copied.
386EX E:\MCPLAT\EXPORT>
386EX E:\MCPLAT\EXPORT>
L-Shift + R-Shift + ESC

MCP POWER OFF / ON


***If target found not appear. MCP OFF and ON again. If you can see first characters on screen interrupt with ESC. Continue unless Target Found appears.

You might also like