Scribd
Upload
28 views5 pages

Computer Networks 2 M

The document provides an overview of data communication, including definitions, key components, and characteristics necessary for effective networks. It discusses various network topologies, protocols, and the importance of flow and error control. Additionally, it covers the OSI and TCP/IP models, types of switching networks, and transmission media, along with their advantages and disadvantages.

Uploaded by

examcell9615
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
28 views5 pages

Computer Networks 2 M

The document provides an overview of data communication, including definitions, key components, and characteristics necessary for effective networks. It discusses various network topologies, protocols, and the importance of flow and error control. Additionally, it covers the OSI and TCP/IP models, types of switching networks, and transmission media, along with their advantages and disadvantages.

Uploaded by

examcell9615
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

UNIT – I : INTRODUCTION AND PHYSICAL LAYER

PART – A (2 Marks)

1. Define – Data Communication (or) What is meant by data communication?


Data communication is defined as the exchange of data between two devices via
some form of transmission medium in whatever form that is agreed upon by the parties
creating and using the data.
2. What are the three criteria necessary for an effective and efficient network?
The three criteria necessary for the effective and efficient networks are
a. Performance
b. Reliability
c. Security
3.What are the fundamental characteristics that determine the effectiveness of the data
communication system?
The fundamental characteristics that determines the effectiveness of data
communication system are
a. Delivery
b. Accuracy
c. Timeliness
d. Jitter
4. What are the advantages of distributed processing?
The advantages of the distributed processing are
a. Security
b. Encapsulation
c. Distributed databases
d. Faster problem solving
e. Security through redundancy
f. Collaborative processing
5. Define – Protocol ?
A protocol is a set of rules that govern data communication. It represents an
agreement between the communicating devices. Without a protocol, two devices may be
connected but not communicating with each other.
6. For an ‘n’ device in a network, what is the number of cable links required for a mesh
and ring topology?
The link required for the number of cables for a mesh and ring topologies are Mesh topology:
n (n-1)/2
(Duplex), n (n-1) (Simplex)
Ring Topology: n
7. What are the five important component of the data communication? (or) Name the
various components of data communication system?
The five important components of the data communication are
a. Message
b. Sender
c. Receiver
d. Transmission Medium
e. Protocol
8. Name the four topologies used in the network?
The four topologies of a network are
a. Ring
b. Star
c. Mesh
d. Bus
9. Define – Computer network (or) Define – Network ?
A computer network is group of devices referred to as nodes connected by communication
links. A node can be a computer, printer, or any other device capable of sending and/or
receiving data generated by other nodes on the network.
10. What are the criteria to evaluate the transmission medium?
The criteria used to evaluate transmission medium are
a. Throughput
b. Propagation Speed
c. Propagation Time
d. Wavelength
11. What are the key elements of a protocol?
The Key elements of a protocol are
a. Syntax
b. Semantics
c. Timing
12. Assume 6 devices are arranged in the mesh topology. How many cables are needed?
How many ports are needed for each device?
The number of device: 6 Topology used: Mesh
Number of cables: n (n–1) / 2 = 6(6–1)/2 = 15
Number of ports per device: n – 1 = 6–1 = 5
13. Define – Link?
Link is a physical medium that transfers data from one device to another
14. List the types of Link. (or) What are the two types of line configuration?
The types of link or line configuration are
a. Point to Point
i. Dedicated link between two devices
ii. Capacity reserved for two nodes
b. Multipoint (or) multi drop
i. More than two devices connected
ii. Link and Capacity shared either spatially or temporally

15. Define – Flow control ?


Flow Control refers to a set of procedures which is used to restrict the flow of data
that the sender can send before waiting for acknowledgment.
16. Define – Error control?
Error control in the data link layer refers primarily to methods of error detection and
retransmission and is based on automatic repeat request, which is the retransmission of data.

17. What are headers and trailers and how do they get removed?
Each layer in sending machine adds its own information to the message it receives from the
layer just above it and passes the whole packages to the layer just below it. This information
is added in the form of headers or trailers. Headers are added to the message at the layers 6, 5,
4, 3, 2. Trailers are added in the layer 2. At the receiving machine, the headers or trailers
attached to the data unit corresponding to the sending layers are removed and appropriate
actions are taken at the receiving layers.
18. The transport layer creates a communication between the source and destination.
What are the three events involved in the connection?
The three events involved in connection between the source and destination are
a. Connection Establishment
b. Data Transfer
c. Connection Release
19. What are the modes for propagating light along optical channels?
There are two modes for propagating light along optical channels, multimode and single
mode. Multimode: Multiple beams from a light source move through the core in different
paths. Single mode: Fiber with extremely small diameter that limits beams to a few angles,
resulting in an almost horizontal beam.
20. What is the main function of physical layer?
The main functions of physical layer are
a. Physical characteristics of interfaces and media
b. Representation of bits
c. Data rate
d. Synchronization of bits
e. Line configuration
f. Physical topology
g. Transmission mode
21. What is TCP/IP?
TCP/IP is a five-layer hierarchical protocol suite made up of interactive
modules, developed before the OSI model. It is the internet model. The five layers are
a. Physical
b. data link (Host to network)
c. Network (Internet)
d. Transport
e. Application (session, presentation and application)
22. What is meant by circuit switching?
A circuit switched network is made of a set of switches connected by physical
links, in which each link is divided into n channels. Circuit switching takes place at the
physical layer. In circuit switching, the resources need to be reserved during the setup phase.
The resources remain dedicated for the entire duration of data transfer phase until the
teardown phase.
23. What is the role of DSL modem?
The role of Digital Subscriber Line (DSL) modem, is to provide high speed access to the
Internet over the existing local loops. DSL technology is a set of technologies, each differing
in the first letter (ADSL,VDSL, HDSL, and SDSL).

PART – B (13 Marks)

1. Explain in detail, the OSI-ISO reference model of a computer with neat diagram.

2. Explain the TCP/IP reference model with neat sketch.


3. Explain the different types of switching networks and list out its advantages and
disadvantages.
4. Explain the four basic network topologies and explain with its relevant features.
5. Distinguish between point-to-point links and multi-point links with relevant diagram.
6. i) Compare connection oriented service with connection less service.
ii) Compare the performance of TCP/IP (Internet model) with ISO/OSI reference model.
7. i) Differentiate guided media from unguided media.
ii) How is cable TV used for data transfer? Explain in detail.
8. What are the different types of transmission media available? Explain the various standards
of guided and unguided media.

You might also like