Pre-accepted Structural Programme

Click here to open list in alphabetical order of Program

Program
Reference Program Version Valid Till Remarks
S0001 SPACE GASS 6.16A 1998-04-30 ANALYSIS PART ONLY
S0002 NL-STRESS 1999-05-02
S0003 SCALE 1999-05-02 SECTION DESIGN TO BS8110 ONLY
S0004 QSE CONCRETE - 1998-05-14
SUBFRAME ANALYSIS
S0005 QSE CONCRETE - R C BEAM 1998-05-14
DESIGN
S0006 QSE CONCRETE - R C BASE 1998-05-14
DESIGN
S0007 QSE CONCRETE - R C 1998-05-14
COLUMN DESIGN
S0008 QSE CONCRETE - R C SLAB 1998-05-14
DESIGN
S0009 SPACE GASS 6.16B 1998-05-19 ANALYSIS PART ONLY
S0010 SUPERSTRESS 3.0 1998-06-08
S0011 LEAP 5 4.1 1998-06-08 ANALYSIS PART FOR FRAMEWORK STRUCTURES ONLY
S0012 COLUMN-ULS 1998-06-12 SADS MODULE, SLENDER COLUMN EXCLUDED
S0013 CADS 8110 - BEAM MODULE 1998-06-12 ANALYSIS PART ONLY
S0014 CADS 8110 - COLUMN 2.12 1998-06-12 DESIGN TO BS8110
MODULE
S0015 SAFE 5.42 2005-02-27
S0016 SAFE RC 5.42 2005-04-09
S0017 ETABS 6.0 2008-05-19 STATIC LINEAR ANALYSIS PART
S0018 FAP 2004-10-22
S0019 CONTINUOUS BEAM 2004-08-12
ANALYSIS AND DESIGN
(REF. NO. HD/V2/BD-95)
S0020 CONTINUOUS BEAM 1998-07-09
ANALYSIS AND DESIGN
(REF. NO. WH/V2/BD-95)
S0021 RAPT 4.50 1998-07-20 FOR REINFORCED & POST-TENSIONED CONCRETE BEAM &
SLAB SYSTEMS
S0022 STAAD III/ISDS 17.0 1998-08-31 ANALYSIS PART ONLY
S0023 RC_COLUMN 2004-03-20
S0024 SUPERSTRESS 3.1C 1998-09-17
S0025 PFAD-V 1998-09-19
S0026 PFAD-L 1998-09-19
S0027 SAFE 5.41 1998-10-09
S0028 GTSTRUDL 9201PC 1998-10-04 ANALYSIS PART ONLY
S0029 ETABS 5.41 2007-12-28 STATIC LINEAR ANALYSIS PART
S0030 ADBEAM 4.0 2004-05-22
S0031 ADRIB 2.0 2005-02-10 STATIC LINEAR ANALYSIS AND DESIGN TO BS 8110:1985
S0032 ADSEC 3.0 2005-01-09 ANALYSIS TO BS 8110 : 1985 ONLY
S0033 ADCOL 3.0 2005-01-08
S0034 ADSLAB 2.0 2005-02-10 STATIC LINEAR ANALYSIS AND DESIGN TO BS 8110:1985
S0035 SPACE GASS 6.16F 1998-11-09 ANALYSIS PART ONLY
S0036 PROKON C1: CB 1998-11-24
(CONTINUOUS BEAM AND
DETAILING)
S0037 PROKON C4: COL (COLUMN 4.14 2005-07-30
DESIGN)
S0038 PROKON C5: CIRCOL 4.12 2005-07-30
(CIRCLE COLUMN DESIGN)
S0039 PROKON C12: GENCOL 1.08 2005-07-30
(GENERAL COLUMN
S0040 PROKON G1: SEC (SECTION 4.05 2005-08-28
PROPERTIES)
S0041 SAP 90 PLUS 5.40 2007-10-18 STATIC LINEAR ANALYSIS PART
S0042 ETABS 6.03 1998-12-18
S0043 ETABS PLUS 6.04 1998-12-18
S0044 ETABS 6.04 1998-12-18
S0045 ETABS PLUS 6.0 1998-12-19
S0046 QSE SPACE W1.23 1998-12-27
S0047 COMPOS 6.2 2005-04-13 STATIC LINEAR ANALYSIS PART AND DESIGN TO
BS5950:PART 3:SECTION 3.1:1990
S0048 RAPT 5.01 1999-01-04

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0049 MULTIFRAME 4D 1.04 2006-04-15 STATIC LINEAR ANALYSIS PART
S0050 ETABS PLUS 6.10 1999-01-18
S0051 CSC FASTSOLVE S-FRAME 2.1K 1999-02-15
S0052 CSC FASTSOLVE P-FRAME 1.06K 1999-02-15
S0053 CSC FASTRAK GENERAL 1999-02-15
SECTION DESIGN MODULE
S0054 CSC FASTRAK SIMPLE 1999-02-15
BEAM DESIGN MODULE
S0055 CSC FASTRAK SIMPLE 1999-02-15
CONNECTION DESIGN
MODULE
S0056 PROKON C6: SLAB 3.06 1999-03-04
S0057 ADSEC 2.0 2002-04-21 ANALYSIS TO BS8110 ONLY
S0058 PROKON C3: FINITE 3.05 2005-08-28
ELEMENT SLAB DESIGN
S0059 TBSA 4.2 1999-03-14
S0060 ATSStructE - RELEASE 20 20.1 2013-08-24
S0061 OASYS AP102+ AND DP102 6.3 2005-06-25 ANALYSIS AND DESIGN TO BS 8110:1985
S0062 SAFE PLUS 5.50 1999-03-24
S0063 PFAD - PAD FOOTING 2011-03-25
ANALYSIS & DESIGN
S0064 SAP 90 5.41 2012-03-04 STATIC LINEAR STRUCTURAL ANALYSIS ONLY
S0065 PRODAS 8110 - CORE WALL 1.0 1999-04-10
MODULE
S0066 STAAD III 20 1999-04-11 ANALYSIS PART ONLY
S0067 SAFERC PLUS 5.40 2002-07-11
S0068 GTSTRUDL 9201RS 1999-04-21 ANALYSIS PART ONLY
S0069 AES-STRUCTURAL 1999-04-21
ANALYSIS SOLVER
S0070 AESSTRUCT 1999-04-21 BCR VERSION
S0071 AESSTRUCT 1999-04-21 BS8110 VERSION
S0072 GENERAL RC COLUMN 1.0 2011-07-24
DESIGN AND ANALYSIS
S0073 OASYS AP+ COLUMNS 2 6.2 2012-04-13
S0074 SAP 90 PLUS 5.41 1999-04-29
S0075 RAPT 5.03 1999-04-29
S0076 W-ARMER 2.0 2002-07-11
S0077 DESIGN OF WALL & LINTEL 2002-06-10
(REF. NO. WH/V2/WD-96)
S0078 MICROSAFE 2-D 4.0 2005-06-26
S0079 MICROSAFE 3-D 4.0 2005-06-26
S0080 MICROSTRAN 5.21 2008-12-17 Static Linear Analysis Part Only
S0081 RCAP 1.001 2011-03-25
S0082 MICROFEAP II (P2 MODULE) 2.1 2008-07-26
S0083 CAPBS 1.0 2007-10-27
S0084 ETABS PLUS 6.05 1999-05-17
S0085 OASYS BUCKLE 1.2 1999-05-20
S0086 SAFE PLUS 5.42 2005-07-29
S0087 SAFECO 5.40 1999-05-21
S0088 SLAB MODULE (HKBCR) 1999-06-05 PRODAS MODULE
S0089 BEAM MODULE 1999-06-05 ANALYSIS TO HKBCR, PRODAS MODULE
S0090 COLUMN MODULE (HKBCR) 1999-06-05 PRODAS MODULE
S0091 COREWALL MODULE 1999-06-05 PRODAS MODULE, HKBCR
S0092 SLAB MODULE (BS8110) 1999-06-05 PRODAS MODULE
S0093 BEAM MODULE 1999-06-05 DESIGN TO BS 8110, PRODAS MODULE
S0094 COLUMN MODULE (BS8110) 1999-06-05 PRODAS MODULE
S0095 COREWALL MODULE 1999-06-05 PRODAS MODULE, BS8110
S0096 SUPERSTRESS 3.1 1999-06-09
S0097 OASYS AP202 FOOTINGS 1.3 1999-06-18
S0098 WALL DESIGN 1.0 1999-06-25
S0099 RAPT 5.10 1999-06-27
S0100 NL3DCBL.BAS 2.0 2011-07-24
S0101 TENSYL 1.3 1999-07-03
S0102 PROKON A1: PLANE FRAME 5.04 2003-02-23
ANALYSIS
S0103 PROKON A3: SPACE FRAME 6.14 1999-07-31
ANALYSIS

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0104 PROKON A4: SPACE TRUSS 5.03 1999-07-31
ANALYSIS
S0105 SPACE GASS 7.0 2005-06-20 ANALYSIS PART AND STEEL MEMBERS DESIGN MODULE TO
BS 5950:1990
S0106 ETABS PLUS 6.12 2009-07-30 STATIC LINEAR ANALYSIS PART
S0107 ETABS 6.1 1999-09-25
S0108 SUPERCONCRETE SC-BEAM 1.1D 1999-10-14
S0109 SUPERCONCRETE SC-SLAB 1.0F 1999-10-14
S0110 SUPERCONCRETE SC-RCOL 1.0D 1999-10-14
S0111 PIGCAR FEBRUARY 2011-04-24
S0112 GSA 6.1 2009-04-20 STATIC LINEAR ANALYSIS ONLY
S0113 MICROSTRAN - 5.5 1999-11-01
CONCRETE/8110 MOUDULE
S0114 MICROSTRAN - STEEL/5950 5.5 1999-11-01
MOUDULE
S0115 RCD87 2004-12-19
S0116 ETABS PLUS 6.1 2005-08-28 STATIC LINEAR ANALYSIS ONLY
S0117 OASYS PIGLET 1.20 1999-11-12
S0118 RCAP8 1.001 2009-04-20
S0119 SUPERSTRESS 3.1D 1999-11-21
S0120 RAPT 5.04 1999-11-26
S0121 OASYS ALP 2.9 1999-12-10
S0122 COSMOS/M STAR-LINEAR 1.75 1999-12-17
STATIC ANALYSIS MODULE
S0123 ETABS PLUS 5.41 2011-07-24
S0124 ETABS PLUS 6.03 2012-08-27 STATIC LINEAR ANALYSIS PART
S0125 MCAP/MCM 1999-12-23
S0126 ASAS-H H11 2000-01-19
S0127 SAP 90 PLUS 5.5 2003-11-07 STATIC LINEAR ANALYSIS PART
S0128 COLUMN 1996# 2000-01-21
S0129 DESIGN OF CONTINUOUS 2000-01-30
BEAMS
S0130 RAPT 5.11 2000-02-09
S0131 MICROSTRAN 5.5 2006-04-15 STATIC LINEAR ANALYSIS PART ONLY
S0132 TBSA 5.0 2013-08-24 ANALYSISI MODULE ONLY
S0133 LPILE PLUS 2.0 2000-02-16
S0134 PROKON A1: PLANE FRAME 5.06 2000-02-18
ANALYSIS
S0135 PROKON A3: SPACE FRAME 6.02 2000-02-18
ANALYSIS
S0136 PROKON A4: SPACE TRUSS 5.05 2000-02-18
ANALYSIS
S0137 PROKON S1: AXIALLY 3.10 2000-02-18
LOADED MEMBER TO
S0138 PROKON S2: COMBINED 2.13 2000-02-18
STRESS DESIGN TO BS5950
S0139 PROKON S3: BEAM- 4.06 2000-02-18
COLUMN CONNECTION TO
S0140 PROKON S5: BASE PLATE 3.09 2000-02-18
DESIGN TO BS5950
S0141 PROKON S10: BOLT GROUP 2.02 2000-02-18
S0142 STAAD III/ISDS 18A 2006-07-03 ANALYSIS PART ONLY
S0143 N8110B2-BEAM 2009-11-02
S0144 N8110RC2, N8110IC2, 2012-09-02 Analysis and Design to BS8110: 1985
N8110CC2 & N8110WL2-
COLUMN & WALL
S0145 SPACE GASS 3.5 2000-03-14 ANALYSIS PART ONLY
S0146 S-FRAME FOR WINDOWS 1.01K 2000-03-10
S0147 GROUP 3 2000-03-14
S0148 PROKON A5: ANALYSIS OF 1.04 2000-03-24
A SINGLE SPAN BEAM
S0149 PROKON A6: BEAM ON 1.02 2000-03-24
ELASTIC SUPPORT
S0150 PROKON C3: FINITE 3.06 2000-03-24 ANALYSIS & DESIGN TO BS 8110
ELEMENT SLAB ANALYSIS
S0151 PROKON C6: 3.07 2000-03-24
RECTANGULAR SLAB

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0152 PROKON C7: REINFORCED 3.17 2000-03-24
CONCRETE BASE DESIGN
TO BS 8110
S0153 PROKON C9: DESIGN FOR 3.07 2005-07-30
CRACK WIDTHS TO BS 8007
S0154 PROKON C10: CONCRETE 2.05 2000-03-24
SECTION DESIGN TO BS
S0155 PROKON G1: CALCULATION 4.08 2000-03-24
OF SECTION PROPERTIES
S0156 SAP 90 5.5 2000-05-01
S0157 OASYS COLUMNS 2 AP123+ 6.2 2010-06-25 ANALYSIS OF R. C. IRREGULAR COLUMNS
ANALYSIS OF R. C.
IRREGULAR COLUMNS
S0158 ETABS 6.13 2009-07-05 STATIC LINEAR ANALYSIS PART
S0159 SAFE 5.5 2003-08-31 STATIC LINEAR ANALYSIS PART
S0160 SAFECO PLUS 5.5 2000-05-05
S0161 SAFERC PLUS 5.5 2000-05-05 EXCLUDING REINFORCEMENT DESIGN
S0162 CBEAMM (CONTINUOUS 2000-05-20
BEAM ANALYSIS)
S0163 PIGLET JANUARY 1995 2000-05-27
S0164 QSE SPACE W2.10 2003-03-08 STATIC LINEAR ANALYSIS PART
S0165 QSE STEEL DESIGNER BS W1.00 2012-03-03
5950:PART 1:1990
S0166 QSE SPACE W2.20 2011-01-30 STATIC LINEAR ANALYSIS PART
S0167 NAF-NIDA 2 2009-07-05 NON-LINEAR ANALYSIS AND DESIGN TO BS 5950
S0168 NAF-SHELL (NON-LINEAR 1 2009-06-22
ANALYSIS)
S0169 RCAP1 2003-09-05
S0170 WALL DESIGN TO BS8110 : 1.001 2011-03-18
1985
S0171 LEAP 5 5.11 2000-07-30 STRUCTURAL ALALYSIS PART ONLY
S0172 STAAD III 21.0 2000-09-21 ANALYSIS PART ONLY
S0173 CALCULATION OF EFFECTS 2003-09-13
CAUSED BY LATERAL
LOADS
S0174 CALCULATION OF PILE AND 2012-06-28
PILE CAP
S0175 CALCULATION OF FOOTING 2012-06-28
S0176 TDAS 2.0 2006-07-26 SADS MODULE
S0177 FRAMANAL 2.0 2006-07-26 SADS MODULE
S0178 BEAM-LFM 2012-06-24 SADS MODULE
S0179 BEAM-ULS 2012-06-24 SADS MODULE
S0180 COLUMN-LFM 2012-06-24 SADS MODULE
S0181 COLUMN-ULS 2000-08-22 SADS MODULE (1.4D + 1.4W IS NOT INCLUDED IN DESIGN)
S0182 COLUMN-ULS2 2000-08-22 SADS MODULE (1.4D + 1.4W IS NOT INCLUDED IN DESIGN)
S0183 WALL-LFM 2012-06-24 SADS MODULE
S0184 WALL-ULS 2000-08-22 SADS MODULE (1.4D + 1.4W IS NOT INCLUDED IN DESIGN)
S0185 PROKON A1: PLANE FRAME 5.07 2000-09-14 PROKON MODULE
ANALYSIS
S0186 C1: CONTINUOUS BEAM 4.06 2000-09-14 PROKON MODULE
AND SLAB DESIGN TO
S0187 OASYS FABLON 1CC.0.10 2000-08-29
S0188 CAPBS 1.5 2013-05-25
S0189 CAPCP 2.5 2013-05-25
S0190 COSMOS/M 1.75A 2004-07-31 STATC STRUCTURAL ANALYSIS USING BEAM3D ELEMENT,
TRUSS3D ELEMENT, AND SHELL4 ELEMENT
S0191 STRAND 6 6.16 2000-09-09
S0192 PIGLET APRIL 1994 2000-09-09 DELETED
S0193 SAP 2000 6.03 2000-09-14
S0194 SAP 2000 6.02 2000-09-14
S0195 PILECAP 4.1 2000-09-21 EXCLUDING TORSION DESIGN
S0196 MICROFEAP II (P1 MODULE) 3.3 2008-07-26
S0197 ETABS PLUS 6.13 2004-02-10 STATIC LINEAR ANALYSIS PART
S0198 OASYS GSA 5.3 2000-09-25
S0199 SAP 2000 6.04 2000-10-15
S0200 SAFE PLUS 5.5 2009-07-30 STATIC LINEAR ANALYSIS PART
S0201 SAFECO 5.5 2005-08-28

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0202 SAFERC 5.5 2000-10-15 EXCLUDING REINFORCEMENT DESIGN
S0203 SAP 2000 6.0 2000-10-16
S0204 GTSTRUDL 9701 2001-04-27 ANALYSIS PART ONLY
S0205 CADS RC BEAM DESIGNER 2.12 2004-01-15 DESIGN TO BS 8110:1985
S0206 SECTAN 2.3.28 2012-12-15 ANALYSIS PART AND CRACK WIDTH DESIGN TO BS 8110:1985
& BS 8007
S0207 LUSAS 11.3 2000-12-04
S0208 MYSTRO 2000-12-04
S0209 RAPT 5.20 2011-01-30 ANALYSIS AND DESIGN TO BS8110:1985
S0210 ETABS PLUS 5.30 2004-04-01
S0211 MAIN 1.0 2007-01-15 STATIC LINEAR ANALYSIS PART
S0212 SAP 2000 PLUS 6.1 2012-02-05 STATIC LINEAR ANALYSIS PART
S0213 OASYS BEAMS (AP102+ & 6.1 2013-08-24 ANALYSIS PART AND DESIGN TO BS8110:1985
DP102+)
S0214 OASYS COLUMNS1 (DP103+) 6.1 2013-08-24 ANALYSIS PART AND DESIGN TO BS8110:1985
S0215 OASYS SLABS2 (AP112+, 6.1 2013-08-24 ANALYSIS PART AND DESIGN TO BS8110:1985
DP112+ & DP113)
S0216 PLANFRAM 3.3 2013-02-10 PLANE FRAME ANALYSIS
S0217 CONTINUOUS BEAM : 2.0 2013-08-02
ANALYSIS & RC DESIGN
S0218 RC WALL DESIGN : 2001-02-08
WALLIA.BAS
S0219 SPACE TRUSS 2013-02-09
S0220 PLANE GRID 2013-02-09
S0221 SPACE FRAME 2013-02-09
S0222 ANALYSIS FOR WINDOWS 1.7 2004-07-02 STATIC LINEAR ANALYSIS PART BUT EXCLUDING
BUCKLING ANALYSIS
S0223 STAAD III 21.1w 2009-11-20 STATIC LINEAR ANALYSIS PART
S0224 ETABS Standard 5.10 2012-09-01 Static Linear Analysis Part
S0225 SAP 2000 PLUS 6.0 2001-02-20
S0226 SAP 2000 PLUS 6.02 2001-02-26
S0227 PLANE FRAME : ANALYSIS 1.0 2013-08-02
& RC DESIGN
S0228 SPACE GASS 8.0 2003-08-31 ANALYSIS PART AND STEEL MEMBER DESIGN MODULE TO
BS 5950
S0229 ETABS 5.4 2004-02-11 STATIC LINEAR ANALYSIS PART
S0230 ETABS PLUS 6.20 2011-01-30
S0231 INSTRESS 3.11 2013-06-29
S0232 CADS ANALYSE 3D 1.52 2004-12-16
S0233 MESAP 2004-03-20
S0234 RC_SECTION 2004-03-20
S0235 PC-MPILE 1.40 2004-04-03
S0236 PRODAS HKBCR - BEAM 2013-07-05
MODULE
S0237 PRODAS HKBCR - COLUMN 2013-07-05
MODULE
S0238 PRODAS HKBCR - SLAB 2013-07-05
MODULE
S0239 PRODAS HKBCR - CORE 2013-07-05
WALL MODULE
S0240 PRODAS BS8110 - BEAM 2013-05-25
MODULE
S0241 PRODAS BS8110 - COLUMN 2013-05-25
MODULE
S0242 PRODAS BS8110 - SLAB 2013-05-25
MODULE
S0243 PRODAS BS8110 - CORE 2013-05-25
WALL MODULE
S0244 BEAMBCR 1.0 2001-03-16
S0245 SAP 2000 PLUS 6.06 2011-07-22 Static Linear Analysis Part
S0246 BEAM 1990 2001-03-23 DESIGN TO BS 8110:1985
S0247 COLUMN 1990 2001-03-23 DESIGN TO BS 8110:1985
S0248 PILEGROUP 1.0 2008-11-02
S0249 RIGID BEAM ANALYSIS 2009-01-26
S0250 PILECAP 2004-09-11 ANALYSIS PART ONLY
S0251 MICROFEAP II : P1 MODULE 3.0 2004-06-13
S0252 MICROFEAP II : P2 MODULE 1.0 2004-06-13

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0253 ETABS PLUS 6.21 2011-07-03 STATIC LINEAR ANALYSIS PART
S0254 LIMITSD 2001-04-29
S0255 PILENCAP 2001-04-29 FOR DESIGN OF RAFT, FOOTINGS, PILES & PILE CAP
S0256 BEAM BS8110 (H.K.) 2001-04-29
S0257 STAAD III 19.0a 2001-05-06 ANALYSIS PART ONLY
S0258 ETABS 5.30 2005-06-18
S0259 CADS RC COLUMN 1.0 2001-05-25
DESIGNER
S0260 OASYS GSA 4.0 2001-06-09
S0261 FADRING 1.01 2013-08-24
S0262 PILING AND PILE CAP 1.0 2011-01-02
ANALYSIS
S0263 RCOL8110 2008-11-07
S0264 ICOL8110 2008-11-07
S0265 CCOL8110 2008-11-07
S0266 WALL8110 2008-11-07
S0267 BEAM8110 2008-11-07
S0268 LATERAL PILE 2.0 2005-09-02
S0269 CEDRUS 3 PLUS 2.29 2013-06-06 STATIC LINEAR ANALYSIS PART
S0270 STATIK 3 2.18 2013-06-06 STATIC LINEAR ANALYSIS PART
S0271 SUPERSTRESS 3.0F 2001-06-29
S0272 SAP 90 5.40 2001-07-02 DELETED
S0273 SUPERSAP 2005-06-13
S0274 CADS 8110 R.C. DESIGN 2001-07-05
S0275 COMBFTG 2010-07-31
S0276 PILEFTG 2010-07-31
S0277 CAPCP 2.0 2007-10-27
S0278 CEDURS 2.22 2001-07-06 FOR LINEAR STATIC ANALYSIS ONLY
S0279 OASYS AP102+ AND DP102+ 6.2 2007-09-26 ANALYSIS AND DESIGN TO BS8110:1985
S0280 OASYS DP8103 4.7B 2001-07-21
S0281 OASYS AP8102 4.3B 2006-06-20
S0282 OASYS AP8123 4.5B 2001-07-21
S0283 STRUSS 2.1 2005-02-07
S0284 APPEND-PFRAME 2005-02-07
S0285 CONTBM 1.01 2001-07-27
S0286 MODULAR 1.01 2008-07-26
S0287 PANCOL5E 5.2 2011-09-24
S0288 PIGLET APRIL 1994 2011-04-24
S0289 BDS 1.003 2008-01-03
S0290 RECSD CP1987 2001-07-27
S0291 CONBEAM 5 2008-01-02
S0292 PLANE TRUSS 7.0 2011-09-11
S0293 SPACE TRUSS 7.0 2011-09-11
S0294 WALL-87CODE 2001-07-29
S0295 CPLANE 7.0 2011-09-11
S0296 STRUCTURAL ANALYSIS OF 7.0 2001-07-29
BEAM ON ELASTIC
FOUNDATION
S0297 RECTCOL, IRRCOL, CIRCOL 2008-01-03
& WALL
S0298 OASYS ALP 3.6 2011-01-02
S0299 CONTINUOUS BEAM 2001-08-02
ANALYSIS
S0300 SPACE GASS 6.15a 2001-08-02 ANALYSIS PART AND MEMBER DESIGN MODULE TO BS 5950
S0301 REG1990 2004-09-17
S0302 N8110RC, N8110C, N8110CC, 2005-07-02
N8110WL - COLUMN &
S0303 THREE DIMENSIONAL 2001-08-05
STRUCTURAL ANALYSIS BY
RECTANGULAR FINITE
ELEMENTS
S0304 BENDSTBM 2011-09-11
S0305 NAF-LIN 1.0 2011-05-20
S0306 CAP 1.0 2008-01-03 ANALYSIS PART ONLY
S0307 STRUCTURAL ANALYSIS OF 2001-08-05
SLAB ON ELASTIC
FOUNDATION

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0308 MTDISTBM 2011-09-11
S0309 ANALYSIS OF PLANE 2001-08-05
STRESS APPLICATIONS
S0310 BEAMR87 1.0 2001-08-09
S0311 N8110B - BEAM 2005-07-02
S0312 RAPT 4.32 2005-03-19 ANALYSIS AND DESIGN TO BS8110:1985
S0313 ASPACE 2011-09-11
S0314 CGRID 2011-09-11
S0315 ANALYSIS OF PLATE 2001-08-09
BENDING
S0316 DPLANE 1.00 2011-09-11
S0317 PFAP 2001-08-11
S0318 TBSA 2005-05-21 ANALYSIS MODULE ONLY
S0319 MICROLEAP 1.05 2001-08-11
S0320 PILELOAD 1.0 2001-08-11
S0321 FCAP 1.0 2010-10-21
S0322 SUPERSTRESS 2.1E 2001-08-12
S0323 FADMATFD-MAT 2012-02-18 EXCLUING NON-LINEAR OPTION
FOUNDATION ANALYSIS
USING FINITE DIFFERENCES
S0324 ANCORE 2001-08-18
S0325 N114RC, N114IC, N114CC, 2012-05-07 Analysis and Design to Structural Use of Concrete 1987
N114WL COLUMN & WALL
S0326 PT-PILEGROUP 1.0 2001-08-10
S0327 DAMS (FOR PLANE FRAME 2011-09-11
ONLY)
S0328 DAMS (FOR SPACE FRAME 2011-09-11
ONLY)
S0329 DESIGN OF COREWALL 2001-08-18
UNDER BIAXIAL BENDING
S0330 MICROSTARN-2D 2.21 NOV85 2001-08-18
S0331 MICROSTRAN-3D 3.23 JUL86 2001-08-18
S0332 SUBFRAME PROGRAM 2005-09-26
COMPLY WITH BS8110
S0333 N114B-BEAM 2012-05-07 Analysis and Design to Structural Use of Concrete 1987
S0334 PC PAFEC-FE LEVEL 7.2 2001-08-18
S0335 TURBOSTRESS 2.0 2011-04-24
S0336 OASYS ALP 3.4 2001-08-19
S0337 LATPILE 2010-11-11
S0338 BEAM.LV 2004-05-22
S0339 BEAM.SV 2004-05-22
S0340 LFCORE.1987 2004-05-22
S0341 FLAT SLAB AMENDMENT 2005-01-17
S0342 CAP 1.1 2001-08-31
S0343 PLANE TRUSS 2001-09-07
S0344 SPACE TRUSS 2001-09-07
S0345 SADS 5.0 2001-09-07
S0346 SAP 90 5.40 2005-03-10 STATIC LINEAR ANALYSIS PART
S0347 SUBFRAME 2005-09-26
S0348 SAP 386 4.3 2001-09-09
S0349 SAFE PLUS 5.10 2001-09-10 ANALYSIS PART ONLY
S0350 WMKYS9-FOUNDATION 2011-04-07
ANALYSIS AND DESIGN
S0351 SAFE PLUS 5.41 2005-08-28
S0352 SAFE PLUS 5.4 2001-09-10
S0353 WMKYS6-IRREGULAR CORE 2011-04-07
WALL STRUCTURE DESIGN
S0354 WMKYS10-SUBFRAME 2011-04-07
ANALYSIS AND DESIGN
S0355 WMKYS1-3 DIMENSIONAL 2001-09-13
FRAME SYSTEM ANALYSIS
S0356 WMKYS2-GENERAL FRAME 2008-06-13
ANALYSIS
S0357 SUPERSTRESS 3.0G 2007-10-19 STATIC LINEAR ANALYSIS PART
S0358 PAL 2.0 2010-11-20
S0359 HKBR (BCR1990) 2001-09-16
S0360 ETABS STANDARD 6.21 2001-09-16 STATIC AND LINEAR ANALYSIS PART ONLY

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0361 ETABS PLUS 5.10 2001-09-16
S0362 W.K. CHUNG COREDF-001 2004-10-02
S0363 W.K. CHUNG BENTDF-001 2004-10-02
S0364 SUPERSTRESS 4.1C 2005-02-27 STATIC LINEAR ANALYSIS PART
S0365 SUPERSTRESS 3.1F 2008-01-27 STATIC LINEAR ANALYSIS PART
S0366 BIAXALBM 3.0 2011-09-11
S0367 LOADFM 1.0 2008-01-03
S0368 OMEGA 2011-09-11
S0369 SAFE 5.10 2001-10-14 ANALYSIS PART ONLY
S0370 WMKYS8-BIAXIAL 2011-04-07
BENDING COLUMN DESIGN
S0371 COLUMN 2 2008-01-02
S0372 SUPERSTRESS 4.2C1 2010-11-05 STATIC LINEAR ANALYSIS PART
S0373 ETABS 5.11 2001-10-26
S0374 BIAXIAL 2 2008-01-02
S0375 SAFECO PLUS 5.40 2005-02-27
S0376 FAP 2 2008-01-02
S0377 CADS ANALYSIS 3D 1.61 2001-11-10 LINEAR STATIC ANALYSIS ONLY
S0378 GTSTRUDL 9801 2011-08-07 STATIC LINEAR ANALYSIS PART
S0379 ETABS NON-LINEAR 6.20 2009-01-25 STATIC LINEAR ANALYSIS PART ONLY
S0380 LFCORE 1 2001-11-22
S0381 FAGUS 3 1.09c 2013-08-02
S0382 STAAD III 12.0a 2001-11-25 ANALYSIS PART ONLY
S0383 SAP 90 PLUS 5.31 2001-11-25
S0384 CADS ANALYSE 3D 1.72 2001-11-30 LINEAR STATIC ANALYSIS ONLY
S0385 SAP 2000 PLUS 6.13 2009-11-02 STATIC LINEAR ANALYSIS PART
S0386 SAP 2000 PLUS 6.13 - - DELETED IN JUNE 1999
S0387 SAP 2000 PLUS 6.13 2001-12-08 STEEL DESIGN TO BS5950
S0388 CAP87 2.0 2011-02-26
S0389 SUPER-ETABS 2001-12-17 STATIC LINEAR ANALYSIS PART ONLY
S0390 DESIGN OF CONTINUOUS 2005-01-08 ANALYSIS AND DESIGN TO BS8110:1985
BEAM
S0391 CORE DESIGN 2005-01-15
S0392 MICROFEAP II (P1 MODULE) 3.1 2005-02-18
S0393 MICROFEAP II (P2 MODULE) 1.1 2005-02-27
S0394 CONTINUOUS BEAM 1.0 2005-02-10
ANALYSIS AND DESIGN
S0395 WIND BENT ANALYSIS 2005-02-10
S0396 WALL ANALYSIS 2005-02-10
S0397 COREWALL DESIGN 2005-02-10
S0398 S-FRAME 1.01-K 2006-10-28
S0399 CADS FE SLAB DESIGNER 1.0 2002-01-04 ANALYSIS PART ONLY
S0400 CONTBM1 2002-01-17
S0401 CADS RC PAD BASE 1.00 2002-01-17
DESIGNER
S0402 SAP 2000 NONLINEAR 7.08 2002-02-24 STATIC LINEAR ANALYSIS AND ANALYSIS USING HOOK
ELEMENT ONLY
S0403 SAP 2000 NONLINEAR 7.08 2002-02-24 STEEL DESIGN TO BS 5950
S0404 SAFE PLUS 6.15 2008-04-20
S0405 CADS RC BEAM DESIGNER 2.21 2002-02-21 DESIGN TO BS 8110
S0406 CADS ANALYSE 3D 1.77 2002-02-21 LINEAR STATIC ANALYSIS ONLY
S0407 SAP 386 4.4 Pro 386-4 2002-02-25
S0408 COLDES/8110 1.0 2002-02-25
S0409 STAAD III 22.3bWM 2012-04-13 STATIC LINEAR ANALYSIS PART FOR PLANE TRUSS AND
SPACE FRAME ONLY
S0410 SAFE PLUS 6.12 2002-03-07
S0411 SAP 90 5.30 2002-03-08 STATIC LINEAR STRUCTURAL ANALYSIS ONLY
S0412 BEAM 2 1.001 2011-03-25
S0413 LEAP5 6.0 2007-02-05 STATIC LINEAR ANALYSIS ONLY
S0414 APPEND-PGRID 2002-03-15
S0415 SUPERSTRESS 4.3 2005-12-17 Static linear analysis and analysis with limits on supports
S0416 CADS ANALYSE 3D 1.78 2002-03-29
S0417 COLUMN DESIGN FOR 1.0 2006-03-18
BIAXIAL LOAD
S0418 SAP 2000 NONLINEAR 7.08 2002-05-24 STATIC LINER ANALYSIS AND ANALYSIS USING HOOK
ELEMENT ONLY, CONCRETE DESIGN TO BS 8110:1985
S0419 SATWE October 1997 2008-04-29 STATIC LINEAR ANALYSIS ONLY

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0420 CADS ANALYSE 3D 1.79 2002-05-10 STATIC LINEAR ANALYSIS ONLY
S0421 CADS RC BEAM DESIGNER 2.23 2002-05-10 DESIGN TO BS 8110:1985
S0422 STRAND6 6.17 2002-05-10 STATIC LINEAR ANALYSIS ONLY
S0423 CADS FE SLAB DESIGNER 1.01 2002-05-17 ANALYSIS PART ONLY
S0424 MICROSTRAN 6.50 2008-06-12 STATIC LINEAR ANALYSIS ONLY
S0425 WALL DESIGN 1.0 2011-03-18
S0426 PIGLET MAY 1997 2008-09-28
S0427 SABLE 3.22 2002-07-11 STATIC LINEAR ANALYSIS WITH BEAM ELEMENT ONLY
S0428 SABLE-3D 2.10 2002-07-11 STATIC LINEAR ANALYSIS WITH BEAM ELEMENT ONLY
S0429 CADS RC BEAM DESIGNER 2.40 2008-04-19 DESIGN TO BS 8110:1985
S0430 PILE LOAD 4.0 2011-09-08
S0431 S-STEEL 1.0-K 2002-07-12 STEEL DESIGN TO BS 5950:PART 1:1990 FOR HOT ROLLED
SECTION ONLY
S0432 SAP 2000 PLUS 7.11 2008-11-02 Static Linear Analysis Part
S0433 SAP 2000 STANDARD 7.11 2006-10-27
S0434 SAP 2000 STANDARD 7.11 2006-10-27 STEEL DESIGN TO BS 5950:1990
S0435 SAP 2000 STANDARD 7.11 2006-10-27 CONCRETE DESIGN TO BS 8110:1985
S0436 ALGOR (ACCUPAK/VE) 12.02-1999 2011-07-24 STATIC LARGE DISPLACEMENT GEOMETRICALLY
NONLINEAR ANALYSIS USING TRUSS ELEMENT AND 3D
SHELL ELEMENT ONLY
S0437 OASYS GSA 7.3 2002-08-04
S0438 CADS RC PAD BASE 1.10 2002-08-29
DESIGNER
S0439 SPACE GASS 8.02a 2008-10-27 STATIC LINEAR ANALYSIS AND STEEL MEMBER DESIGN
MODULE TO BS 5950:1990
S0440 SAFE PLUS 6.21 2002-09-02
S0441 SAFE PLUS 6.23 2011-09-16
S0442 COLUMN-ULS 2 2011-08-14 SADS MODULES
S0443 COLUMN-ULS2 2 2011-08-14 SADS MODULES
S0444 WALL-ULS 2 2011-08-14 SADS MODULES
S0445 IMAGES 3D 3.0 2002-08-18 STATIC LINEAR ANALYSIS AND ANALYSIS USING "LIMIT
DISPLACEMENT IN COMPRESSION SPRING ELEMENT" ONLY
S0446 PKPM SERIES CAD HK VERSION 1.1 2011-06-18 STRUCTURAL DESIGN PART TO BS 8110:1985
SOFTWARE
S0447 FOUNDATION DESIGN ON 1.00 2012-06-07
RIGID CAP
S0448 CADS RC COLUMN 1.33 2002-08-31
DESIGNER
S0449 SAP 2000 NONLINEAR 7.11 2002-09-02 STATIC LINEAR ANALYSIS AND ANALYSIS USING GAP
ELEMENT ONLY
S0450 PROKON A1 : PLANE FRAME W1.2.00 2002-09-18
ANALYSIS
S0451 PROKON C21 : SECTION W1.2.00 2002-09-18
DESIGN FOR CRACK
S0452 CIRCULAR RC COLUMN 4.0 2009-07-05
DESIGN BS 8110:1985
S0453 STAAD III 20.2 2003-01-20 STATIC LINEAR ANALYSIS PART ONLY
S0454 HKCOL 1999 2003-01-25
S0455 RC COLUMN DESIGN - BS 2.1 2009-07-05
8110:1985
S0456 GTSTRUDL 9901 2003-02-22 STATIC LINEAR ANALYSIS PART
S0457 PILE AND PILE CAP 1.0 2009-02-28
ANALYSIS AND DESIGN -
PCAD
S0458 OASYS GSA FOR WINDOWS 7.4.2 2013-02-11 STATIC LINEAR ANALYSIS PART
S0459 STAAD III 23.0W 2003-03-14 STATIC LINEAR ANALYSIS PART FOR TRUSS/FRAME
STRUCTURE ONLY
S0460 inTENS 4.0 2006-04-15 TENSION STRUCTURE ANALYSIS
S0461 PROKON G01 : SECTION W1.2.00 2003-03-23
PROPERTIES CALCULATION
S0462 PILE CAP 1.0 2003-04-05
S0463 S-FRAME 4.0 2003-04-13 STATIC LINEAR ANALYSIS PART
S0464 ADBEAM 5.3 2003-04-16 ANALYSIS AND DESIGN TO BS 8110:1985
S0465 CADS RC BEAM DESIGNER 2.43 2003-05-10 ANALYSIS AND DESIGN TO BS 8110:1985
S0466 PROKON A12 : BEAM ON W1.2.00 2003-05-22
ELASTIC SUPPORT

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0467 PROKON C1 : CB 4.16 2003-05-22 ANALYSIS AND DESIGN TO BS 8110:1985 OF CONTINUOUS
R.C. BEAM
S0468 ADCOL 5.4 2012-07-08 Analysis and Design to BS8110: 1985
S0469 SAFE PLUS 6.30 2012-04-27 STATIC LINEAR ANALYSIS PART
S0470 OASYS ADSEC 5.4 2012-10-04 ANALYSIS TO BS 8110:1985
S0471 SPACE GASS 8.04a 2012-06-28 STATIC LINEAR ANALYSIS AND STEEL MEMBER DESIGN
MODULE TO BS 5950
S0472 SAP 2000 PLUS 7.40 2012-10-05 STATIC LINEAR ANALYSIS PART
S0473 SAP 2000 STANDARD 7.40 2012-07-30 STATIC LINEAR ANALYSIS PART
S0474 SAP 2000 STANDARD 7.40 2012-09-01 STEEL DESIGN TO BS 5950:1990
S0475 SAP 2000 STANDARD 7.40 2012-09-01 CONCRETE DESIGN TO BS 8110:1985
S0476 SAP 2000 NONLINEAR 7.40 2013-08-08 STATIC LINEAR ANALYSIS AND ANALYSIS USING GAP
ELEMENT
S0477 BEAMCAP 3.0 2003-09-04
S0478 MICROSTRAN 7.0 2012-12-16 STATIC LINEAR ANALYSIS PART
S0479 ETABS PLUS 6.23 2010-03-28 STATIC LINEAR ANALYSIS PART
S0480 GENERALIZED ELASTIC 1.0 2013-06-24
SUPPORTED BEAM
S0481 LUSAS 13 2007-10-24 STATIC LINEAR ANALYSIS PART AND NATURAL
FREQUENCY ANALYSIS OF STRUCTURES
S0482 PILE AND PILE CAP DESIGN 2.0 2007-06-27
(PPCD)
S0483 PROKON C01 : CONTINUOUS W1.7.04 2004-03-15
BEAM AND SLAB DESIGN
TO BS8110:1985
S0484 WALL4D.BAS: RC WALL 2013-02-09
DESIGN
S0485 PROKON C11 : W1.7.00 2013-07-05
RECTANGULAR COLUMN
DESIGN TO BS8110:1985
S0486 MCAP 6.53 2004-04-08
S0487 ETABS PLUS 7.13 2013-03-28 STATIC LINEAR ANALYSIS PART
S0488 ETABS PLUS 7.13 2013-03-28 CONCRETE DESIGN TO BS8110:1985
S0489 MCAP 7.48 2007-06-14
S0490 OASYS PIGLET 2.9 2004-07-02
S0491 STRAND7 1.06 2004-08-14 STATIC LINEAR ANALSIS OF PLANE FRAME/TRUSS AND
SPACE FRAME/TRUSS
S0492 GTSTRUDL 25 2004-09-17 STATIC LINEAR ANALYSIS PART
S0493 TBCAD 1.0 2004-11-14 AUTOMATIC FLOOR LOAD CALCULAION BASED ON
TRIBUTARY AREA AND CALCULATION OF MOMENT OF
INERTIA OF SECTIONS
S0494 MCAP 5.45 2011-03-30
S0495 CADS RCCOLUMN 1.52 2005-03-10 DESIGN TO BS8110:1985
S0496 CADS ANALYSIS 3D 3.00 2005-03-06 STATIC LINEAR ANALYSIS PART FOR 2D STRUCTURES
S0497 ETABS PLUS 7.22 2011-05-07 STATIC LINEAR ANALYSIS PART
S0498 CADS RC BEAM DESIGNER 3.14 2005-03-07 DESIGN TO BS8110:1985
S0499 FOUNDATION DESIGN ON 1.0 2011-08-21 STATIC LINEAR ANALYSIS AND DESIGN
ELASTIC CAP (FDE)
S0500 COSMOS/M 2.5 2011-10-16 STATIC GEOMETRIC NON-LINEAR ANALYSIS USING
BEAM3D/TRUSS3D/SHELL3/SHELL3T/SHELL4/SHELL4T
ELEMENTS
S0501 ETABS PLUS 7.22 2011-05-07 GRAVITY LOAD COLLECTION USING SLAB SECTION WITH
PLATE OR SHELL-TYPE BEHAVIOUR
S0502 ETABS PLUS 7.22 2005-03-21 CONCRETE DESIGN TO BS8110:1985
S0503 PROKON C01 : CONTINUOUS W1.7.09 2011-07-03
BEAM AND SLAB DESIGN
TO BS8110:1985
S0504 MERO 384 2011-03-25 STATIC LINEAR ANALYSIS OF SPACE TRUSS
S0505 IDS-CB8110 MODULE 7.1 2011-04-15
S0506 SPACE GASS 8.07 2013-03-07 STEEL MEMBER DESIGN MODULE TO BS5950:1990
S0507 STRAND7 1.06 2005-04-14 STATIC GEOMETRIC NON-LINEAR ANALYSIS USING BEAM
ELEMENT AND PLATE /SHELL ELEMENT
S0508 ALGOR RELEASE 12 2011-07-24 STAIC LINEAR ANALYSIS USING PLATE/SHELL ELEMENT
S0509 Statik 3 2.57 2011-07-23 Static Linear Analysis Part
S0510 Cedrus 3 Plus 2.44 2012-11-15 Static Linear Analysis Part
S0511 CADS RC COLUMN 1.53 2008-08-28 Design to BS 8110:1985
DESIGNER

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0512 CADS RC BEAM DESIGNER 3.16 2008-08-28 Design to BS 8110:1985
S0513 CADS ANALYSE 3D 3.12 2005-08-28 Static Linear Analysis Part for 2D Structures
S0514 PileCap 2000 2008-09-29
S0515 GTSTRUDL 26 2005-09-17 Static Linear Analysis Part
S0516 STAAD / Pro-QSE 6.0 2011-09-11 Static Linear Analysis Part
S0517 QSE Steel Designer BS5950 1.7 2011-09-11
S0519 FAGUS 3 1.15h 2005-10-07
S0520 Oasys GSA for Windows 7.6.1 2005-10-07 Static Linear Analysis Part
S0521 ETABS PLUS 8.09 2012-02-05 Static Linear Analysis Part
S0522 SAFE 7.01 2011-10-19 Static Linear Analysis and Concrete Design to BS8110:1985
S0523 Prokon A1: Plane Frame W1.7.10 2012-05-20 Static Linear Analysis Part Only
S0524 Prokon A3 : Space Frame W1.7.05 2012-05-20 Static Linear Analysis Part Only
S0525 Prokon A4 : Space Truss W1.7.02 2012-05-20 Static Linear Analysis Part Only
S0526 Prokon S1: Member Design for W1.7.04 2009-01-26 Design to BS5950:1990
Axial Stress
S0527 Prokon S2 : Member Design for W1.7.07 2009-01-26 Design to BS5950:1990
Combined Stress
S0528 COMPOS 7.3.1 2012-02-23 Static Linear Analysis Part and
Design to BS5950 : Part 3 : Section 3.1 : 1990
S0529 STAAD-III 22.3aW 2009-01-25 Static Linear Analysis Part Only
S0530 S-FRAME 5.02 2009-04-20 Static Linear Analysis Part Only
S0531 Continuous Beam 2009-05-28
S0532 GTSTRUDL 26 2006-05-19 Concrete Design to BS8110 : 1985
S0533 GTSTRUDL 26 2006-05-19 Steel Design to BS5950 :1990
S0534 ROCKCONE 1.0 2012-03-03
S0535 ADBEAM 5.7 2012-07-08 Analysis and Design to BS8110:1985
S0536 ADCOL 5.9 2012-07-08 Analysis and Design to BS8110: 1985
S0537 ADSEC 5.11 2012-10-04 Analysis to BS8110:1985
S0538 S-Steel 5.02 2009-04-29 Steel Design to BS5950:Part 1:1990
S0539 SYWSCFLAT 1.1F 2009-07-04
S0540 PROVERBE W6.1 HK 2006-05-13
S0541 ADSEC 7.2 2012-10-04 Analysis to BS8110:1985
S0542 ADC 7.2 2009-07-06 Analysis and Design to BS8110:1985
S0543 CADS ANALYSE 3D 3.31 2006-05-22 Static Linear Analysis Part for 2D Structures
S0544 CADS ANALYSE 3D 3.41 2006-05-22 Static Linear Analysis Part for 2D Structures
S0545 CADS RC COLUMN 1.61 2006-05-22 Design to BS 8110:1985
DESIGNER
S0546 CADS RC BEAM DESIGNER 3.21 2006-05-22 Design to BS 8110:1985
S0547 SAP2000 Standard 8.1.5 2012-06-15 Static Linear Analysis Part
S0548 SAP2000 Plus 8.1.5 2006-06-02 Static Linear Analysis Part
S0549 Prokon C13:GENCOL W1.9.03 2012-06-07 General Column Design to BS8110:1985
S0550 Framework 8.67 2009-07-04 Static Linear Analysis Only
S0551 Multiframe 4D 5.15 2006-08-24 Static Linear Analysis Part
S0552 SAP2000 Nonlinear 8.1.5 2006-09-19 Static Linear Analysis and Analysis using GAP and HOOK Element
S0553 ESA-PT 4.1 2006-09-19 Static Linear Analysis Part only
S0554 SYWFEM - Design 4.05 2006-09-25 Static Linear Analysis and Design to BS8110:1985 Only
S0555 S-Frame 6.1 2006-09-28 Static Linear Analysis Part Only
S0556 S-Steel 6.14 2010-09-24 Steel Design to BS 5950 : Part 1 :1990
S0557 Prokon C21: Section Design for W1.9.00 2009-10-14 Crack Width Checking to BS8007 Only
Crack Width
S0558 SPACE GASS 8.07 2013-03-07 Static Linear Analysis Only
S0559 Repute 1.0 2007-01-11 Linear Soil Model Only
S0560 GTSTRUDL 27 2007-01-15 Static Linear Analysis Part
S0561 GTSTRUDL 27 2007-01-15 Concrete Design to BS8110:1985
S0562 GTSTRUDL 27 2007-01-15 Steel Design to BS5950:1990
S0563 RAM Frame 8.04 2007-01-20 Linear Static Lateral Load Analysis Part Only
S0564 SAP2000 Standard 7.50 2007-01-27 Static Linear Analysis Part
S0565 SAP2000 Plus 7.50 2007-01-27 Static Linear Analysis Part
S0566 SAP2000 Nonlinear 7.50 2007-01-27 Static Linear Analysis and Analysis using GAP and HOOK Elements
S0567 ESA-Prima Win 3.4 2007-02-02 Static Linear Analysis Part Only
S0568 ROBOT Millennium 15.5.1 2007-03-01 Static Linear Analysis Part
S0569 PIGLET October 1996 2010-05-30 - Analysis for vertical loading only (piles are assumed to be vertical).
- Analysis for vertical and horizontal loading in one plane only (piles
are assumed to be raked only in the plane of loading).
- Full analysis of pile group under vertical, horizontal and torsional
loading (piles may be raked in any direction).

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0570 W-SECT 6 2007-05-30
S0571 C-SECT 6 2007-06-06
S0572 S-Frame 6.2 2013-06-08 Static Linear Analysis Part only
S0573 SPACE GASS 9.03 2010-11-21 Static Linear Analysis Only
S0574 SAP2000 8.2.9 2007-06-20 Static Linear Analysis Part
S0575 Prokon A3 : Space Frame W1.8.13 2007-06-28 Static Linear Analysis Part Only
S0576 CADS ANALYSE 3D 3.44 2007-06-24 Static Linear Analysis Part for 2D Structures
S0577 CADS RC COLUMN 1.62 2007-06-24 Designer to BS 8110:1985
DESIGNER
S0578 CADS RC BEAM DESIGNER 3.23 2007-06-24 Designer to BS 8110:1985
S0579 STRAND7 2.2.5 2007-06-24 Static Linear Analysis Part
S0580 STRAND7 2.2.5 2007-06-24 Static Geometric Non-linear Analysis for Beam, Truss, Plate & Shell
Elements
S0581 ETABS 8.3.7 2013-06-29 Static Linear Analysis Part
S0582 ETABS 8.3.7 2013-06-29 Gravity Load Collection
S0583 MIDAS/Gen 5.8.1 2007-07-13 Static Linear Analysis Part
S0584 Oasys GSA for Windows 8.0 2007-07-12 Static Linear Analysis Part
S0585 SOFISTIK Modules GENF, 2012-12-16 Static Linear Analysis Part
SOFIMESH, AQUA,
SOFILOAD, ASE and STAR2
S0586 B-SECT 6 2007-07-18
S0587 BEAM-LFM 3 2011-06-05
S0588 BEAM - ULS 3 2013-07-11
S0589 COLUMN - LFM 3 2011-06-05
S0590 COLUMN - ULS 3 2013-07-11
S0591 COLUMN - ULS2 3 2013-07-11
S0592 WALL - LFM 3 2011-06-05
S0593 WALL - ULS 3 2013-07-11
S0594 RCD 2004 2012-02-26
S0595 SWALL 1.0 2011-02-04
S0596 CADS RC COLUMN 1.65 2008-01-13 Design to BS 8110:1985
DESIGNER
S0597 CADS RC BEAM DESIGNER 3.27 2008-01-13 Design to BS 8110:1985
S0598 SuperSTRESS 6.1c 2008-01-13 Static linear analysis and analysis with limits on supports
S0599 CADS ANALYSE 3D 3.51 2008-01-17 Static Linear Analysis Part for 2D Structures
S0600 ADSEC 7.3 2008-01-18 Analysis to BS8110:1985
S0601 ROBOT Millennium 17.5 2008-01-25 Static Linear Analysis Part
S0602 VLA-S1 1.0 2011-07-27
S0603 VLA-S2 1.0 2011-07-27
S0604 VLA-S5 1.0 2011-07-27
S0605 VLA-S6 1.0 2011-07-27
S0606 Microstran 8 2011-07-03 Static Linear Analysis Part
S0607 Lateral Pile 5 2011-09-09
S0608 SAFE 8.0.6 2011-05-20 Static Linear Analysis and Concrete Design to BS8110:1985
S0609 SAP2000 9.1.0 2012-02-05 Static Linear Analysis Part
S0610 RuckZuck 5 2008-06-03
S0611 Shear Wall 2008-06-05
S0612 VLA-S3 1.0 2011-07-27
S0613 VLA-S4 1.0 2011-07-27
S0614 VLA-S7 1.0 2011-07-27
S0615 VLA-F1 1.0 2011-07-27
S0616 VLA-F2 1.0 2011-07-27
S0617 VLA-F3 1.0 2011-07-27
S0618 FAP 8110X April 2005 2008-09-14
S0619 TCP Design 1.0 - Mar 2005 2008-09-19
S0620 VLA-G2 1.0 2011-07-27
S0621 TEDDS 8.0 2008-11-22 Continuous Beam Analysis
S0622 STAAD.Pro Release 2004 2011-09-11
S0623 PIGLET 5.1 2011-10-07
S0624 VLA-G1 1.0 2011-07-27
S0625 ADAPT-PT 7.10 2008-10-16 Analysis and Design to BS8110:1985
S0627 Tower Peak 1.0 2012-03-15 Static Linear Analysis of Tall Building
S0628 RAPT 6.1 2008-10-25 Analysis and Design to BS8110:1985
S0629 CAD RC COLUMN 1.66 2009-01-16 Designer to BS 8110:1985
S0630 CAD RC BEAM DESIGNER 3.28 2009-01-16 Designer to BS 8110:1985
S0631 GTSTRUDL 28 2009-01-05 Static Linear Analysis Part
S0632 GTSTRUDL 28 2009-01-05 Concrete Design to BS8110:1985

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0633 GTSTRUDL 28 2009-01-05 Steel Design to BS5950:1990
S0634 Tower Peak 1.0 2012-04-20 Analysis and Design of Foundation Group
S0635 ETABS Plus P5.40 2012-02-05
S0636 SAP2000 9.1.6 2012-02-05 Static Linear Analysis Part
S0637 SAP2000 9.1.6 2009-01-25 Steel Design to BS5950:1990
S0638 SPACE GASS 10.21 2009-01-25 Static Linear Analysis Part
S0639 SPACE GASS 10.21 2009-01-25 Steel Design to BS5950:1990
S0640 CBHK2004 1.0 2009-02-07 Continuous Beam Analysis and RC Design to HK Code of Practice for
Structural Use of Concrete 2004
S0641 Rectangular RC Column Design 1.0 2012-03-11 Concrete Grade not Exceeding C45
(ULS)
S0642 Circular RC Column Design 5.0 2012-03-11 Concrete Grade not Exceeding C45
S0644 ADCOL 8.0 2009-02-15
S0645 BEAM 04 1.0 2012-03-23 Concrete Grade not Exceeding C45
S0646 Col 04 1.0 2012-03-23 Concrete Grade not Exceeding C45
S0647 SWALL 04 1.0 2012-03-23 Concrete Grade not Exceeding C45
S0648 ADAPT - Floor Pro 2009-03-31 Analysis and Design to BS8110:1985
S0649 RSTAB 5 2009-05-11
S0650 SuperSTRESS 6.4D 2012-04-13 Static linear analysis Part
S0651 SuperSTRESS Wood-Armer 3.0G 2012-04-13 Design of Concrete Slab to BS 8110:1985
S0652 NAF-NIDA 7 2012-03-23 Non-linear Analysis and Design to Code of Practice for the Structural
Use of Steel 2005
S0653 SAP2000 9.1.6 2012-11-02 Elastic Buckling of Frame and Shell
S0654 BEAM-2004 1 2009-05-25 RC Design to HK Code of Practice for Structural Use of Concrete 2004
S0655 Column-2004 1 2009-05-25 RC Design to HK Code of Practice for Structural Use of Concrete 2004
S0656 Wall-2004 1 2009-05-25 RC Design to HK Code of Practice for Structural Use of Concrete 2004
S0657 HKBM2004 1.01 2012-07-29 Concrete Grade not Exceeding C45
S0658 inTENS 5.3 2009-07-10 Tension Structure Analysis
S0659 Orion R14 2012-12-20 - Static Linear Analysis only
- Only default "Area Factor 1.0" in stiffness options of building
analysis is allowed
- Users may need to assess the effect of differential elastic shortening
of column/wall elements
- Transfer plate is modelled by grillage of beams

S0660 CONBEAM2006 1.0 2009-07-23 RC Design to HK Code of Practice for Structural Use of Concrete 2004
S0661 Wall RC Design ( ULS) 1.0 2009-07-24 RC Design to HK Code of Practice for Structural Use of Concrete 2004
S0662 FAP 8110X2004 2012-07-23 Concrete Grade not Exceeding C45
March 2006
S0663 TCP Design 2.0 - March 2006 2012-09-16 Concrete Grade not Exceeeding C45
S0664 TEDDS 9.0 2009-08-16 Continuous Beam Analysis
S0665 S-FRAME 7.0 2012-07-01 Static Linear Analysis Part only
S0666 ROBOT Millennium 19.0 2012-06-28 Static Linear Analysis Part
S0667 SAP2000 10.0.8 2012-10-28 Static Linear Analysis Part
S0668 STRAND7 2.3.6 2012-11-18 Static Linear Analysis Part
S0669 STRAND7 2.3.6 2009-10-26 Static Geometric Non-linear Analysis for Beam, Truss, Plate & Shell
Elements
S0670 Prokon C11: Rectangular W2.2.07 2009-11-27 RC Design to HK Code of Practice for Structural Use of Concrete 2004
Column Design
S0671 Prokon C13 : General Column W2.2.03 2009-11-27 RC Design to HK Code of Practice for Structural Use of Concrete 2004
Design
S0672 ETABS 9.1.0 2012-11-02 Static Linear Analysis Part
S0673 ETABS 9.1.0 2012-11-02 Gravity Load Collection
S0674 GTSTRUDL 29 2009-12-07 Static Linear Analysis Part
S0675 GTSTRUDL 29 2009-12-07 Concrete Design to BS8110 : 1985
S0676 GTSTRUDL 29 2009-12-07 Steel Design to BS 5950 : 1990
S0677 CADS RC COLUMN 1.68 2009-12-06 Design to BS8110: 1985
DESIGNER
S0678 CADS RC BEAM DESIGNER 3.30 2009-12-06 Design to BS 8110: 1985
S0679 CADS ANALYSE 3D 3.62 2009-12-06 Static Linear Analysis Part for 2D Structures
S0680 Prokon C01 : Continuous Beam W2.2.24 2013-01-24 Excluding desgin for flanged beam and concrete grade not exceeding
and Slab Design C45
S0681 Oasys GSA for Windows 8.2 2010-02-08 Static Linear Analysis Part
S0682 COLUMN2006 1.0 2010-02-27 for rc column with concrete grade not exceeding C45

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0683 Tower Peak 1.0 2013-07-20 Reinforced Concrete Design to Code of Practice for structural Use of
Concrete 2004 for concrete grade
not exceeding C45

S0684 PRODAS 2004 - SLAB 2010-05-09

MODULE
S0685 PRODAS 2004 - BEAM 2010-05-09
MODULE
S0686 PRODAS 2004 - COLUMN 2010-05-09 Concrete grade not exceeding C45
MODULE
S0687 PRODAS 2004 - CORE WALL 2010-05-09 Concrete grade not exceeding C45
MODULE
S0688 Foundation Design on Rigid Cap 2.00 2013-06-24 Concrete grade not exceeding C45
S0689 Foundation Design on Elastic 2.00 2013-06-24 Concrete grade not exceeding C45
Cap (FDE)
S0690 SPACE GASS 10.50 2013-07-18 Static Linear Analysis Part
S0691 SPACE GASS 10.50 2013-07-18 Analysis of elastic critical load
S0692 SPACE GASS 10.50 2013-07-18 Steel Design to BS 5950: 1990
S0693 SPACE GASS 10.50 2013-07-18 Steel Design to Code of Practice for the Structural Use of Steel 2005
S0694 SAP2000 11.0.4 2012-11-08 Static Linear Analysis Part
S0695 SAP2000 11.0.4 2013-08-24 Steel Design to BS5950 : 1990
S0696 SAP2000 11.0.4 2013-08-24 Elastic Buckling of Frame and Shell
S0697 ADSEC 8.0 2013-08-02 Analysis to code of Practice for Structural Use of Concrete 2004 and
PNAP 296
S0698 ISA 5.0 2010-08-26
S0699 TEDDS 10.0 2013-09-26 Continous Beam Analysis
S0700 Orion R14 2013-08-31 Design Part to Code of Practice for Structural Use of Concrete 2004 with
concrete grade not exceeding C45
S0701 Orion R14 2010-09-17 Design Part to BS8110: 1985
S0702 BEAM - 2004 2.0 2013-07-11 SADS Modules
S0703 COLUMN-2004 2.0 2013-07-11 SADS Modules
S0704 Wall - 2004 2.0 2013-07-11 SADS Modules

S0705 LUSAS 14 2010-10-14 Static Linear Analysis Part and Natural Frequency Analysis of
S0706 STAAD.Pro Release 2006 2010-11-22 Static linear analysis only
S0707 S-Steel 7.02 2011-02-03 Steel Design to BS5950: Part 1 :1990
S0708 SPACE GASS 10.5 2011-02-04 Second Order Analysis
Inclusion of member imperfections is not automatic and must be
input manually
S0709 SAP2000 11.0.4 2011-02-04 Second Order Analysis
Inclusion of member imperfections is not automatic and must be
input manually.
S0710 ADAPT-Floor Pro 3.10 2011-02-19 Post-Tensioning Analysis and Design to Code of Practice for Structural
Use of Concrete 2004
S0711 ADAPT-PT 8.0 2011-02-19 Post-Tensioning Analysis and Design to Code of Practice for Structural
Use of Concrete 2004
S0712 SYWSCFLAT 2004 2011-03-05 Concrete grade not exceeding C45
S0713 CBHK2004 2.0 2011-03-05
S0714 ANSYS 10.0 2011-03-10 Solid Element SOLID45 - Linear Analysis Only
S0715 TowerPeak 1.0 2012-01-29 Static linear analysis for superstructure combined with foundation
S0716 ADAPT-ABI 4.09 2011-05-19 Post-Tensioning Analysis only to Code of Practice for Structural Use of
Concrete 2004
S0717 COLUMN2006 2.0 2011-04-07
S0718 Prokon C11 W.2.4.01 2011-05-20 Rectangular Column Design
S0719 Prokon C13 W.2.4.01 2011-05-20 General Column Design
S0720 Prokon C01 W.2.4.01 2011-05-20 Continuous Beam/Slab (Concrete grade not exceeding C70)
S0721 Prokon C13 W.2.3.06 2011-06-18 General Column Design
S0722 Prokon C01 W.2.3.20 2011-06-18 Concrete grade not exceeding C70
S0723 ADC 8.1 2011-06-29 Analysis and Design to Code of Practice for Structural Use of Concrete
2004
S0724 Orion R15 R15 2011-07-07 Analysis and Design to Code of Practice for Structural Use of Concrete
2004
S0725 CONBEAM2006 2.0 2011-07-20
S0726 Orion R15 2011-09-16 Static Linear Analysis Part
S0727 PRODAS 2004 - Slab Module 2011-10-13 Concrete grade not exceeding C70
S0728 PRODAS 2004 - Beam Module 2011-10-13 Concrete grade not exceeding C70
S0729 PRODAS 2004 - Column 2011-10-11 Concrete grade not exceeding C70
Last revision date: 20/10/2010
 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0730 PRODAS 2004 - Corewall 2011-10-13 Concrete grade not exceeding C70
S0731 TowerPeak 2.0 2012-01-29 Reinforced concrete design to Code of Practice for Structural Use of
Concrete 2004
S0732 GTSTRUDL 29.1 2012-02-22 Static Linear Analysis Part
S0733 GTSTRUDL 29.1 2012-02-22 Concrete Design to BS8110:1985
S0734 GTSRUDL 29.1 2012-02-22 Steel Design to BS5950:1990
S0735 CADS Analyse 3D 3.67 2012-02-23 Static Linear Analysis Part for 2D Structures
S0736 Oasys GSA for Windows 8.3 2012-03-10 Static Linear Analysis Part
S0737 Oasys GSA for Windows 8.3 2012-03-10 Elastic Critical Load Factor Analysis
S0738 CADS RC BEAM DESIGNER 3.33 2012-03-15 Design to BS8110: 1985
S0739 NAF-NIDA 8 2012-03-23 Non-linear Analysis and Design to Code of Practice for the Structural
Use of Steel 2005
S0740 ETABS 9.5.0 2012-04-01 Static Linear Analysis Part
S0741 ETABS 9.5.0 2012-04-01 Gravity Load Collection
S0742 Rectangular RC Column Design 1.0 2012-04-07 ULS
S0743 Circular RC Column Design 5.0 2012-04-07 ULS
S0744 ETABS 8.5.1 2012-04-15 Static Linear Analysis Part
S0745 ETABS 8.5.1 2012-04-15 Gravity Load Collection
S0746 inTENS 5.5 2012-06-07 Tension Structure Analysis
S0747 RCD09 2.0.0 2012-08-06 Design to COde of Practice for Structural Use of Concrete 2004
S0748 SPACE GASS 10.50 2012-08-11 Dynamic Frequency Analysis for Space Frame
S0749 SAP2000 12.0.2 2012-09-20 -Static Linear Analysis Part
-The users may need to assess the effect of differential axial
shortening of column/wall elements
S0750 SAP2000 12.0.2 2012-09-20 Steel Design to B5950: 1990

S0751 SAP2000 12.0.2 2012-09-20 Linear Elastic Buckling Analysis of Frame and Shell Only
S0752 Wall RC Design (ULS) 1.0 2012-10-01
S0753 Oasys ALP 18.2 2012-10-20
S0754 CONBEAM2006 3.0 2012-10-21
S0755 ADAPT BUILDER Floor Pro 2012-10-22 Post-Tensioning Analysis and Design to Code of Practice for Structural
2009/2010 Use of Concrete 2004 with
Concrete Grade not exceeding C45
S0756 LUSAS 14.3 2012-11-05 ( Static Linear Analysis and Natural Frequency Analysis of Structures )
*
* The users may need to assess the effect of differential axial
shortening of column/wall elements
S0757 ADSEC 8.1 2012-11-17 Analysis to Code of Practice for Structural Use of Concrete 2004
S0758 RAPT 6.2 2012-11-16 Analysis and Design to Code of Practice for Structural Use of Concrete
2004
S0759 Oasys GSA for Windows 8.4 2012-11-18 Static Linear Analyssi Part
S0760 Oasys GSA for Windows 8.4 2012-11-18 Elastic Critical Load Factor Analysis
S0761 Orion 15.1 2012-11-23 - Static linear analysis only
- Only desault "Area Factor 1.0" in stiffness options of building
analysis is allowed
- User may need to assess the effect of differential elastic shortening
of column/wall elements
- Transfer plate is modelled by grillage of beams
- Analysis of inclined wall and pile cap is not included

S0762 Orion 15.1 2012-11-23 Design to Code of Practice for Structural Use of Concrete 2004
S0763 ADC 8.2 2012-12-20 Analysis and Design to code of Practice for Structural Use of Concrete
S0764 RSA (ROBOT Structural v.2010 2013-01-12 Static Linear Analysis Part
Analysis)
S0765 RSA (ROBOT Structural v.2010 2013-01-12 Elastic Critical Load Factor Analysis
Analysis)
S0766 RSA (ROBOT Structural v.2010 2013-01-12 Natural Frequency Analysis of Structures
Analysis)
S0767 SAP2000 12.0.2 2013-01-13 Second Order Analysis
Inclusion of member imperfections is not automatic and must be input
manually
S0768 STRAND7 2.3.7 2013-01-20 Static Linear Analysis Part
S0769 Cedrus 5 1.30 2013-01-25 Static Linear Analysis for Plate Structures Only
S0770 Cedrus 5 1.30 2013-01-25 Dynamic Frequency Analysis for Plate Structures Only

Last revision date: 20/10/2010

 Pre-accepted Structural Programme

Program
Reference Program Version Valid Till Remarks
S0771 Cedrus 5 1.30 2013-01-25 Flexural Design for Reinforced and Pretressed Concrete to Code of
Practice for Structural Use of
Concrete 2004 for Plate Structural Only
The user is required to input the appropriate reduction factor a and
concrete ultimate strain e to make sure
the design is in accordance with the Code of Practice for Structural
Use of Concrete 2004 (second edition)
based on BS 8110:1985)

S0772 GTSTRUDL 30 2013-02-01 Static Linear Analysis Part

S0773 GTSTRUDL 30 2013-02-07 Concrete Design to BS 8110: 1985
S0774 GTSTRUDL 30 2013-02-07 Steel Design to BS 5950: 1990
S0775 BEAM - 2004 3.0 2013-02-21
S0776 COLUMN - 2004 3.0 2013-02-21
S0777 SAP90 5.41 2013-02-23 - "Beam on Elastic Foundation" Approach of 2D - Analysis for Earth
Retaining Structures
- "Beam on Elastic Foundation" approach is restricted to the
limitations as stipulated under Chapter 5.4.6 of
GCO Publication 1/90 - " Review of Design Methods for
S0778 RSA ( ROBOT Structural 2010 2013-03-22 P-Delta only Elastic Analysis by Moment Amplification
Analysis)
S0779 S-Frame 7.0 2013-04-26 - "Beam on Elastic Foundation" Approach of 2D-Analysis for Earth
Retaining Structures
- Beam on Elastic Foundation" approach is restricted to the
limitations as stipulated under Chapter 5.4.6 of
GCO Publication 1/90 - "Review of Design Methods for
Excavations"
S0780 S-Frame 7.0 2013-06-09 Tension Structure Analysis
S0781 SAFE 12.2.0 2013-06-10 Static Linear Analysis Part
S0782 SAFE 12.2.0 2013-06-10 Concrete Design to Code of Practice for Structural Use fo Concrete 2004
S0783 CADS ANALYSE 3D 3.72 2013-09-08 Static Linear Analysis Part for 2D Structures
S0784 Orion R16* 2013-09-27 1. Static linear analysis only
2. Only default "Area Factor 1.0" in stiffness options of building
analysis is allowed
3. Users may need to assess the effect of differential elastic shortening
of column/wall elements.
4. Transfer plate is modelled by grillage of beams
5. Analysis of inclined wall and pile cap is not included
S0785 Orion R16 2013-09-27 Design to Code of Practice for Structural Use of Concrete 2004
S0786 SAP2000 14.2.0 2013-10-05 Static Linear Analysis
S0787 SAP2000 14.2.0 2013-10-05 Linear Elastic Buckling Analysis of Frame and Shell Only
S0788 SAP2000 14.2.0 2013-10-05 Second Order Analysis

Last revision date: 20/10/2010