The document outlines the electrical work specifications for a proposed one-storey building, adhering to various codes and regulations. It details the load schedule for different circuits, including wire sizes, conduit types, and mounting heights for devices. Additionally, it emphasizes that all installations must be supervised by a licensed electrical engineer and that all materials used should be new and of good quality.
The document outlines the electrical work specifications for a proposed one-storey building, adhering to various codes and regulations. It details the load schedule for different circuits, including wire sizes, conduit types, and mounting heights for devices. Additionally, it emphasizes that all installations must be supervised by a licensed electrical engineer and that all materials used should be new and of good quality.
The document outlines the electrical work specifications for a proposed one-storey building, adhering to various codes and regulations. It details the load schedule for different circuits, including wire sizes, conduit types, and mounting heights for devices. Additionally, it emphasizes that all installations must be supervised by a licensed electrical engineer and that all materials used should be new and of good quality.
The document outlines the electrical work specifications for a proposed one-storey building, adhering to various codes and regulations. It details the load schedule for different circuits, including wire sizes, conduit types, and mounting heights for devices. Additionally, it emphasizes that all installations must be supervised by a licensed electrical engineer and that all materials used should be new and of good quality.
1. ALL ELECTRICAL WORKS, HEREIN SHALL BE DONE IN ACCORDANCE WITH THE
REQUIREMENTS OF THE NATIONAL BUILDING CODE, THE PHILIPPINE ELECTRICAL CODE, CKT. N0. LOAD DESCRIPTION WATTS VOLTAGE AMPS ACB WIRE SIZE & TYPE CONDUIT SIZE & TYPE THE RULES AND REGULATION OF THE LOCAL GOVERNMENT, AND THE REQUIREMENT (CURRENT) OF THE LOCAL ELECTRIC UTILITY. 2. 3. ALL MATERIALS TO BE USED SHALL BE NEW AND OF GOOD QUALITY. LIGHTING BRANCH CIRCUIT SHALL BE 3.5 sq.mm THHN STRANDED WIRE IN 20mmØ PVC 1 LIGHTING OUTLET 155 230 0.67 15A 2 - 2.0 mm² THHN 1/2" Ø PVC PIPE. 4. CONVENIENCE OUTLET CIRCUIT SHALL BE 5.5 sq.mm THHN STRANDED WIRE IN 20mmØ PVC PIPE. 2 POWER OUTLET 1,620 230 7.04 20A 2 - 3.5 mm² THHN 3/4" Ø PVC 5. AIRCON OUTLET CIRCUIT SHALL BE 8.0 sq.mm THHN STRANDED WIRE IN 20mmØ PVC
6. PIPE MOUNTING HEIGHT OF DEVICE SHALL BE AS FOLLOWS UNLESS NOTED OTHERWISE 3 LIGHTING OUTLET 180 230 0.78 15A 2 - 2.0 mm² THHN 1/2" Ø PVC PANEL BOARD 1500mm ABOVE FINISHED FLOOR 4 1 HP FUEL DISPENSER OUTLET 750 230 3.41 30A 2 - 5.5 mm² THHN 1" Ø PVC LOCAL SWITCHES 1400mm ABOVE FINISHED FLOOR CONVENIENCE OUTLET 300mm ABOVE FINISHED FLOOR 170mm ABOVE COUNTERS 5 1 HP FUEL DISPENSER OUTLET 750 230 3.41 30A 2 - 5.5 mm² THHN 1" Ø PVC AIRCON OUTLET 2000mm ABOVE FINISHED FLOOR EMERGENCY LIGHT 300mm BELOW FINISHED CEILING 6 SPLIT TYPE ACU, 2.0 hp 1,500 230 6.52 30A 2 - 5.5 mm² THHN 1" Ø PVC 7. ALL LOCAL SWITCHES TO BE CONNECTED SHALL BE RATED 15 AMPERES 8. ALL ELECTRICAL INSTALLATIONS SHALL BE UNDER THE SUPERVISION OF A DULY LICENSED ELECTRICAL ENGINEER OR REGISTERED MASTER ELECTRICIAN 7 SPLIT TYPE ACU, 2.0 hp 1,500 230 6.52 30A 2 - 5.5 mm² THHN 1" Ø PVC 8 SPARE 1,500 2 - 8.0 mm² THHN 9 SPARE 1,500 LEGEND MAIN TOTAL 9,455 230 41.10 60A 1 - 5.5mm² THHN(GROUND) 1"Ø PVC PIPE SYMBOL DESCRIPTION CIRCUIT RUN 7W LED PINLIGHT Sa 1 GANG SWITCH EM EMERGENCY LIGHT
S ab 2 GANG SWITCH CO CONVENIENCE OUTLET
S abc 3 GANG SWITCH
ACU AIRCON OUTLET FROM POWER SOURCE 30W LED FLOODLIGHT PB PANEL BOARD SERVICE ENTRANCE FIRE EXTINGUISHER FEEDER LINE FE (1.40 M)
LINE NOT CONNECTED
M KWHR METER
2 -14mm² THW IN 32mm RSC PIPE
1-5.5mm² THHN(GROUND)
60A MAIN ACB
a b c 15w 15w 15w C2 TO MDP
C6 a b c C7 TO Sab PB TO 15w 15w 15w MDP PANEL BOARD MDP Scde C1 e e C1 MAIN 60A 15 A TO 15w 15w MDP THIS SITE C2 20 A 15 A C3
C4 C5 30 A 30 A
C6 C7 30 A 30 A
C6 C7 SPARE SPARE
CONVENIENCE STORE AND 1- #8 TW (GREEN)
OFFICE LAYOUT 5/8
SCALE 1:75 M
VICINITY MAP SCALE NTS SINGLE LINE DIAGRAM SCALE NTS
SEAL PROFESSIONAL ELECTRICAL ENGINEER PROJECT TITLE : PROJECT OWNER : SHEET NUMBER DESIGNED:
BENJENITO R. CEMINI DRAFTED : E-1
REG. NO. : 0003212 VALIDITY : 07/09/2025 PROPOSED ONE-STOREY BUILDING WITH ROOFDECK DATE : PROJECT NUMBER
PTR. NO. : 0916920 DATE : JAN. 02, 2025 JANUARY 2025
TIN NO. : 922-009-352 PLACE: TANJAY CITY LOCATION: MOJON-MARICABAN ROAD, MARICABAN, SANTA FE, CEBU ADDRESS: VALLEYVIEW VILL, MOHON, TALISAY CITY, CEBU
