Scribd
Upload
12 views5 pages

Assignment 1 2024-25

The document is an assignment for B Tech 4th semester students focusing on Electrical Circuit and Network Analysis, dated April 2, 2025. It consists of 22 questions that require students to analyze various electrical circuits using concepts such as Norton’s and Thevenin’s equivalents, superposition theorem, nodal analysis, and responses of RC and RL circuits. Each question references specific figures to guide the analysis and calculations required.

Uploaded by

ashishjangid0581
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views5 pages

Assignment 1 2024-25

The document is an assignment for B Tech 4th semester students focusing on Electrical Circuit and Network Analysis, dated April 2, 2025. It consists of 22 questions that require students to analyze various electrical circuits using concepts such as Norton’s and Thevenin’s equivalents, superposition theorem, nodal analysis, and responses of RC and RL circuits. Each question references specific figures to guide the analysis and calculations required.

Uploaded by

ashishjangid0581
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Electrical Circuit & Network Analysis Date 4/2/2025

B Tech 4 Sem (2024-25)


Assignment 1

Q1 Find Norton’s equivalent network of Fig.1

Q2 For the network shown in Fig. 2 calculate the maximum power that may be
dissipated in the load resistor RL.

Q3 For the network shown in Fig. 3, find the voltages V1 and V2.

Q4 Determine the voltage VAB for the network shown in Fig.4 using superposition
theorem

Q5 Find the current through the j5 􀀁 branch for the network shown in Fig. 5

Q6 Obtain Thevenin’s equivalent network for Fig.6


Q7 Obtain Thevenin’s equivalent network for Fig.7

Q8 Calculate Vx in the circuit using source transformation for Fig.8

Q9 Sketch the following functions:

Q10 Solve for the current I in the circuit of Fig.9 using nodal analysis.

Q11 The Source-Free RC Circuit


The switch in Fig. 10 opens at t =0 Find vo for t >0
Q12 For the circuit in Fig.11, Find vo(t) for t >0. Determine the time necessary for
the capacitor voltage to decay to one-third of its value at t = 0.

Q13 The Source-Free RL Circuit


Consider the circuit of Fig.12. Find vo(t) if i(0) = 2 A and v(t) = 0.

Q14 In the circuit of Fig.13, find i(t) for if i(0) = 2 A.

Q15 Step Response of an RC Circuit


Calculate the capacitor voltage for t<0 and t >0 for each of the circuits in Fig.14.

Q16 For the circuit in Fig.15, is(t) = 5u(t). Find v(t).


Q17 Consider the circuit in Fig. 16. Find i(t) for t<0 and t >0.

Q18 Step Response of an RL Circuit


Obtain the inductor current in the circuit for t<0 and t>0

Q19 Find v(t) for t>0 in the circuit of Fig.17 if the initial current in the inductor is
zero.

Q20 Derive the expression for series RLC circuit and find the response under
overdamped, critically damped and underdamped using suitable diagram.
Q21 In the circuit of Fig. 18, find:
Q22 The differential equation that describes the voltage in an RLC network is

You might also like