Scribd
Upload
10 views7 pages

Aci Design Sheet

The document outlines the design parameters and calculations for a shielding door column subjected to axial load and moment, following the AISC 9th Edition Manual. Key inputs include column size, loadings, base plate dimensions, and anchor bolt data, resulting in calculated values for eccentricity, bearing pressures, and allowable stresses. The analysis confirms that the design meets the required specifications for rigidity and strength.

Uploaded by

kalu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
10 views7 pages

Aci Design Sheet

The document outlines the design parameters and calculations for a shielding door column subjected to axial load and moment, following the AISC 9th Edition Manual. Key inputs include column size, loadings, base plate dimensions, and anchor bolt data, resulting in calculated values for eccentricity, bearing pressures, and allowable stresses. The analysis confirms that the design meets the required specifications for rigidity and strength.

Uploaded by

kalu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Per AISC 9th Edition Manual (ASD)

For Axial Load with Moment


Shielding Door
Input Data:

Column Size:
Gusset Length 250.00 mm
Gusset Width 160.00 mm
Column Loadings:
Axial Load, P(total) = 18.18 KN
Shear Load, V(total) = 0.00 KN
Moment @ Base, Mu = 69.41 KNm ED1= 50.000
Design Parameters:
Base Plate Length, N = 400.000 mm be ED2= 50.000
Base Plate Width, B = 400.000 mm
Plate Yield Stress, Fy = 250.000 N/mm2
Concrete Strength, f 'c = 30.000 N/mm2 B=
Bearing Area, A2 = 160000.00 mm 2 400.000
Anchor Bolt/Rod Data:

Anchor Dia 20.000 mm


Anchor Material A-36 m 0.95*d m
Bolt Edge distance ED1 50.000 mm
Bolt Edge distance ED2 50.000 mm N= 400.000
pedestal size 500.000 mm

Area of pedestal 250000.000 mm2 Plan


m= 81.250 mm
n 136.000 mm
Total No. of Bolts, Nb = 6 Nos
Results:
Eccentricity, Bearing Length, and Bearing Pressures: e = M/P
Eccentricity, e = 3817.932 mm
Modular ratio=Es/Ec 7.303
As-Area of anchor 942.478 mm2
Length (Xc) 109.828 mm
Xc2 10853.795
Xc 101395.171
143381788.396
F(Xc) 0.000 0.000
Allowable Bearing stress(Fp) = 10.500 N/mm2
fp(max) = 10.479 N/mm2
O.K
Anchor Bolt/Rod Tension and Shear: T= Xc
T= 212.00 KN Tb*(Nb/2)
Allowable Tension(Ta) = N
Tb = 70.67 kN/bolt
Elevation
Base Plate Thickness: Suggested plate thickness for rigidity:
Xc <m or Xc >m Xc > m
tp(req'd) = 28.671 mm tp(min) = 20.313 mm tp(min) >= max. of m/4 or n/4
be 31.250 mm
tp 47.55 mm

224.9415262

70667.46462 314.15927 224.9415


44.479711145637
2.77E+007 24989.645 16.19999946
11.315035544295
27.70224 24.989645 27.515035004295

n 300 275 90
0.366093936 0.3993752

0.80*bf
Xc
sigma
n C 230182.39 230.18239 kN T

T 212.00

P 18.18 18.18
M 46.844215 0 0
230.18

4.3239441

P(total) =
1.818E+01
(-down)

click on D40
tp GO TO What if analysis - goal seek - set to value as 0
set the "by changing value as C36
fp(max) CLICK OK
10.479
P= 18.18 KN
Mz = 69.41 KNm
My = 36.3 KNm

plate thickness for rigidity: P= 16 KN


Mz = 23.19 KNm
>= max. of m/4 or n/4 My = 18.411 KNm
109.82818
10.479205
212.00239

You might also like