FUNCTION GENERATOR

130710_ENG Rev. 01

Function Generator
Type 1307-10

Microprocessor controlled Function Generator FD4E Internal memory for storing all settings by use of
is provided with 4 digit LED display as well as serial EEPROM technology.
interface RS-232.
4 different readout units of amplitude.
4 digit autoranging readout of frequency.
Fully galvanically separated adjustable DC power
Advanced algorithm for reciprocal frequency amplifier. This amplifier is well suited for experiments
measuring. with for example IMPO vibrator (1419-10).
Fast and easy setting of frequency, amplitude and The RS-232 interface is galvanically separated.
function via a knob and pushbuttons or via the Different languages on the RS-232 interface may be
interface. selected.
Measuring of external frequency with 4 digits
accuracy.
The function generator can generate the waveforms
sinus, triangle and square.
Frequency modulation with DC coupled input.

IMPO Electronic A/S · Svovlhatten 3 · DK-5220 Odense SØ · Denmark

General:
Sweep:
Mains input: 230 V AC ±10%, 50 Hz Range: DC - 50 kHz
Display: 4 digit LED Deviation @ 5 kHz: 1,3 kHz/V
Interface: RS-232 serial interface
Data format: 8 bit ASCII, no parity, Peak to peak measurement (When installed):
1 start/stop bit Range: 20 Hz - 100 kHz
Baudrate: 300, 1200, 2400, 4800, 0 V - ±12,5 V
9600 bits/sek
Peak to peak range: 0 V - 25 Vpp
Dimensions: 286 x 215 x 122 incl.
Resolution: 0,1 V
connectors, handle and feet
Accuracy: ± 0,1 V
Weight: 5,1 kg
Linearity: ± 3 dB
Output:
Output impedance: 600 Ω ± 5% Circuit for AM modulation (When installed):
Input impedance: 120 kΩ
Amplitude units: Output impedance: 600 Ω
% AMPL.: amplitude in percentages Carrier @ 10 kHz: 0 V - 8.0 Vpp
Vpp: peak to peak voltage, Modulation index: 0,5 at carrier @ 10 kHz,
unloaded modulation 100 Hz,
Vrms: active voltage, unloaded 6,5 Vpp ± 0,5 V
dBm: power into 600 Ω (0 dBm
equals 1 mW into 600 Ω) DC Power Amplifier:
Coupling: Galvanically separated,
Frequency: DC coupling from input
Range: 0,1 Hz - 100 kHz to output
Resolution: 4 digits Voltage ampl.: 0 - 10 times,
Accuracy: ± 1 on least significant digit continuously adjustable

Waveform: Input:
Sinus voltage: 0 Vpp - 20 Vpp Input impedance: 10 kΩ
Sinus distortion: typ. 0,5% THD
Triangle voltage: 0 Vpp - 20 Vpp Output:
Square voltage: 0 V - +10 V Range: DC - 20 kHz
Square rise time: 1,5 us at max. output voltage Voltage max.: ± 12,5 V
Accuracy: ± 10% + 1 digit (unloaded) Current max.: > 4 Ω)
± 2,5 A (R L =
20 kHz - 100 kHz
FM/SWEEP Voltage max.: ± 10 V
Input impedance: 100 kΩ / 100 pF Current max.: > 4 Ω)
± 2,5 A (R L =
Max. input: ± 25 V Amplitude stability: ± 1%
Rise time: typ. 5 us at max.
Frequency measurement: output voltage
Range: 0,1 Hz - 150 kHz Harmonic distortion: 0,1% ved 1 kHz
Resolution: 4 digits
Accuracy: ± 1 on least significant digit
Negative trigger level: 0 V
Positive trigger level: + 0,5 V