R.R.

INSTITUTE OF MODERN TECHNOLOGY

NH-24, Bakshi Ka Talab, Sitapur Road, Lucknow, Uttar Pradesh 226201

Odd Semester
(SESSION: 2023-2024)

Subject Name: -ELECTRICAL MEASUREMENTS & INSTRUMENTATION

Subject Code: - KEE302
Branch:- Electrical Engineering Semester: - 3rd
Issue Date: 20/09/2023 Submission Date: 27/09/2023

Course Bloom’s
Outcome Statement of Course Outcome Taxonomy
Level
CO.1 Evaluate errors in measurement as well as identify and use different types of (I)
instruments for the measurement of voltage, current.
CO .2 Demonstrate the construction and working of different measuring instruments
(II)
for Power, energy and frequency measurements.
CO. 3 Demonstrate the construction and working of different AC and DC bridges,
(II)
along with their applications.
CO. 4 Demonstrate the working of instrument transformers as well as calculate the
errors in current and potential transformers, Manifest the working of electronic
instruments like voltmeter, multimeter, frequency meter and CRO and ability to (II)
measure electrical engineering parameters like voltage, current, power, phase
difference and frequency.
CO. 5 Display the knowledge of transducers, their classifications and their applications
for the measurement of physical quantities like motion, force, pressure, (III)
temperature, flow and liquid level.

Assignment No.: 1

Level of
Course
Ques. No. Question Bloom’s
Outcome
Taxonomy
1 a) Write the construction of multi-range voltmeter. CO.1 I
b) Define the following terms
i) Error ii) Resolution (iii) Sensitivity
2 Define with the help of circuit diagram the construction and CO.1 I
working of a shunt-type ohm meter.
3 Define sensitivity. Express sensitivity mathematically. What is CO.1 I
deflection factor?
4 Define the fundamental principle on which DC voltmeter CO.1 I
meter is constructed
5 Draw the circuit of multimeter? Explain the operation of it? CO.1 1

(Signature of Faculty) (Signature of H.O.D.)

 R.R. INSTITUTE OF MODERN TECHNOLOGY
NH-24, Bakshi Ka Talab, Sitapur Road, Lucknow, Uttar Pradesh 226201

Odd Semester
(SESSION: 2023-2024)

Subject Name: -ELECTRICAL MEASUREMENTS & INSTRUMENTATION

Subject Code: - KEE302
Branch:- Electrical Engineering Semester: - 3rd
Issue Date: 05/10/2023 Submission Date: 12/10/2023

Course Bloom’s
Outcome Statement of Course Outcome Taxonomy
Level
CO.1 Evaluate errors in measurement as well as identify and use different types of (I)
instruments for the measurement of voltage, current.
CO .2 Demonstrate the construction and working of different measuring instruments
(II)
for Power, energy and frequency measurements.
CO. 3 Demonstrate the construction and working of different AC and DC bridges,
(II)
along with their applications.
CO. 4 Demonstrate the working of instrument transformers as well as calculate the
errors in current and potential transformers, Manifest the working of electronic
instruments like voltmeter, multimeter, frequency meter and CRO and ability to (II)
measure electrical engineering parameters like voltage, current, power, phase
difference and frequency.
CO. 5 Display the knowledge of transducers, their classifications and their applications
for the measurement of physical quantities like motion, force, pressure, (III)
temperature, flow and liquid level.
Assignment No.: 2

Ques. No. Question Course Level of

Outcome Bloom’s
Taxonomy
1 Mention the Types of watt meters CO.2 I
2 Difference between power factor meter & analog frequency CO.2 I
meter
3 Explain with a block diagram Single phase dynamometer. CO.2 II
4 Explain the expression for deflecting and control torques. CO.2 II
5 Describe in details the construction and working of an CO.2 II
induction type wattmeter.

(Signature of Faculty) (Signature of H.O.D.)

 R.R. INSTITUTE OF MODERN TECHNOLOGY
NH-24, Bakshi Ka Talab, Sitapur Road, Lucknow, Uttar Pradesh 226201

Odd Semester
(SESSION: 2023-2024)

Subject Name: -ELECTRICAL MEASUREMENTS & INSTRUMENTATION

Subject Code: - KEE302
Branch:- Electrical Engineering Semester: - 3rd
Issue Date: 04/11/2023 Submission Date: 09/11/2023

Course Bloom’s
Outcome Statement of Course Outcome Taxonomy
Level
CO.1 Evaluate errors in measurement as well as identify and use different types of (I)
instruments for the measurement of voltage, current.
CO .2 Demonstrate the construction and working of different measuring instruments
(II)
for Power, energy and frequency measurements.
CO. 3 Demonstrate the construction and working of different AC and DC bridges,
(II)
along with their applications.
CO. 4 Demonstrate the working of instrument transformers as well as calculate the
errors in current and potential transformers, Manifest the working of electronic
instruments like voltmeter, multimeter, frequency meter and CRO and ability to (II)
measure electrical engineering parameters like voltage, current, power, phase
difference and frequency.
CO. 5 Display the knowledge of transducers, their classifications and their applications
for the measurement of physical quantities like motion, force, pressure, (III)
temperature, flow and liquid level.
Assignment No.: 3

Ques. Question Course Level of

No. Outcome Bloom’s
Taxonomy
1 What is a bridge? What is the importance of a bridge? CO.3 I
2 What is the difference between Schering and Kelvin Bridge? CO.3 I
3 Compare Maxwell’s and Hay’s bridge? CO.3 I
4 Explain the working of a standard sweep generator with diagram. CO.3 II
5 Describe the diagram with operation of a harmonic distortion CO.3 II
analyser using a bridge T-network

(Signature of Faculty) (Signature of H.O.D.)

 R.R. INSTITUTE OF MODERN TECHNOLOGY
NH-24, Bakshi Ka Talab, Sitapur Road, Lucknow, Uttar Pradesh 226201

Odd Semester
(SESSION: 2023-2024)

Subject Name: -ELECTRICAL MEASUREMENTS & INSTRUMENTATION

Subject Code: - KEE302
Branch:- Electrical Engineering Semester: - 3rd
Issue Date: 02/12/2023 Submission Date: 08/12/2023

Course Bloom’s
Outcome Statement of Course Outcome Taxonomy
Level
CO.1 Evaluate errors in measurement as well as identify and use different types of (I)
instruments for the measurement of voltage, current.
CO .2 Demonstrate the construction and working of different measuring instruments
(II)
for Power, energy and frequency measurements.
CO. 3 Demonstrate the construction and working of different AC and DC bridges,
(II)
along with their applications.
CO. 4 Demonstrate the working of instrument transformers as well as calculate the
errors in current and potential transformers, Manifest the working of electronic
instruments like voltmeter, multimeter, frequency meter and CRO and ability to (II)
measure electrical engineering parameters like voltage, current, power, phase
difference and frequency.
CO. 5 Display the knowledge of transducers, their classifications and their applications
for the measurement of physical quantities like motion, force, pressure, (III)
temperature, flow and liquid level.
Assignment No.: 4

Ques. No. Question Course Level of

Outcome Bloom’s
Taxonomy
1 Mention the standard specifications of a simple CRO? CO.4 I
2 State the functions of following( i) Astigmatism( ii) focus CO.4 I
3 Explain with a block diagram ,the major parts of CRT. CO.4 II
4 Explain with a diagram how frequency can be measured using CO.4 II
lassajous pattern method.
5 Describe in details the construction and working of an analog CO.4 II
type storage oscilloscope.

(Signature of Faculty) (Signature of H.O.D.)

 R.R. INSTITUTE OF MODERN TECHNOLOGY
NH-24, Bakshi Ka Talab, Sitapur Road, Lucknow, Uttar Pradesh 226201

Odd Semester
(SESSION: 2023-2024)

Subject Name: -ELECTRICAL MEASUREMENTS & INSTRUMENTATION

Subject Code: - KEE302
Branch:- Electrical Engineering Semester: - 3rd
Issue Date: 19/12/2023 Submission Date: 23/12/2023

Course Bloom’s
Outcome Statement of Course Outcome Taxonomy
Level
CO.1 Evaluate errors in measurement as well as identify and use different types of (I)
instruments for the measurement of voltage, current.
CO .2 Demonstrate the construction and working of different measuring instruments
(II)
for Power, energy and frequency measurements.
CO. 3 Demonstrate the construction and working of different AC and DC bridges,
(II)
along with their applications.
CO. 4 Demonstrate the working of instrument transformers as well as calculate the
errors in current and potential transformers, Manifest the working of electronic
instruments like voltmeter, multimeter, frequency meter and CRO and ability to (II)
measure electrical engineering parameters like voltage, current, power, phase
difference and frequency.
CO. 5 Display the knowledge of transducers, their classifications and their applications
for the measurement of physical quantities like motion, force, pressure, (III)
temperature, flow and liquid level.
Assignment No.: 5

Ques. No. Question Course Level of

Outcome Bloom’s
Taxonomy
1 What is the difference between thermistor and thermocouple? CO.5 I
2 List the various types of temperature transducers? CO.5 I
3 Define piezoelectric effect. Write the applications of piezoelectric CO.5 I
transducer
4 Explain strain gauge for resistance measurement & its applications. CO.5 II

5 A Resistance Strain gauge with gauge factor of 2 is cemented to a CO.5 III

steel member, which is subjected to a strain of 1×106.If the original
resistance value of the gauge is 130Ω, calculate the change in
resistance.

(Signature of Faculty) (Signature of H.O.D.)