Consumer Pump Estimation E2E
Consumer Pump Estimation E2E
Date: 20-01-2024
QUOTATION
# DESCRIPTION QTY Unit Price Amount
1 Fabrication of 30KL MS Storage Tank as per drawings & 1 5,30,000 5,30,000
Specification with all the necessary accessories and duly
painted with two coats of Zinc Chromate red oxide primer
2 Fabrication of 25KL MS Storage Tank as per drawings & 1 4,85,000 4,85,000
Specification with all the necessary accessories and duly
painted with two coats of Zinc Chromate red oxide primer
3 ‘Dual Suction type Dispensing Unit’ HD-HD, LPM 2 3,10,000 6,20,000
@ 75; with 1” nozzles, 12 Digit Non-Reversible
Electronic Totalizer, with 2 Printers and PESO
Approved, Legal Metrology & ATEX Approval.
With Printers no’s, Automation Compatible
4 Pipeline Materials (80mm MS ERW Steel tubes, 80mm MS 1 2,20,000 2,20,000
NR Threaded Flanges, threaded elbow G.M angle check
valve, Sockets, Venthood, Ball valves, Hex nipples, gasket
rings, Nut & Bolts ½” X ½”
5 Panel Board (Proper fabricated panel board as per 1 85,000 85,000
specification to install electrical components, Power cut-
off switch. Auto change over switch to connect to
generator)
6 Electricals items (2.5sqmX 3core copper cable, 19mm DC 1 1,30,000 1,30,000
glands, PVC glands, coper plats, GI Pipes full set, 500VA
CVT, V guard VND stabilizer and other electrical items)
7 Civil Work (Island construction for dual Dispensers, Earthing 1 4,00,000 4,00,000
work for electrical cables from DU to Panel board room, PCC
work for Tank installation, Earth work for Pipeline installation.
Electrical room construction and other works as needed)
8 Installation and commissioning 1 60,000 60,000