AFD860 Digital Ultrasonic Flaw Detector
Introduction
The AFD860 is an ultra-light handy
UT instrument of outstanding
performance.
Compatible with EN12668-1:2010.
This instrument is mounted with TG
TFT display of full WVGA (800×480
pixels) resolution for excelling
visibility even used outdoors or in
strong sunlight. Another amazing
feature of this product is the “square
wave drive” which realizes the user’s
dream for best sensitivity and
resolution. Moreover, it’s compatible
with EN12668-1:2010, the popular
instrumentation standards widely
recognized in European and even the
international market. Weighing only
0.9kg, this apparatus enables the
user to carry it just like an on-hand
tool for instant inspection task. All
these distinct advantages make it
superior as compared to its
counterparts.
Highlights of AFD860
ultrasonic flaw detector
Square Wave Drive
800X480 Pixels
Curved Surface Consideration
DGS & DAC functional Curve
B-Scan
RF Waveforming Mode
API 5UE Evaluation Module
Velocity/Delay/Angle Calibration
Performance Indices Test
Recording (1 Hour in Total)
1000 Frames of A-scan Storage
Echo Crest Tracking
ComApp for PC Review and Report Print
Enveloping (for Waveform Comparison)
0.9kg in Weight
AWS D1.1 Evaluation Module
Features
Advanced circuitry, 640MHz sampling frequency and 800×480 full WVGA resolution assure
quick and accurate display and analysis on defect signals even when the signals are weak.
Using the advanced tunable square wave excitation technology, the AFD860 provides
excellent penetration and high signal-to-noise ratio when detecting special composite
materials, highly-attenuated or thick work-pieces.
4.3 inches display, set-in battery and charger, but only 0.9kg in weight which make it easy to
operate and carry along.
The design meets the standard of IP54 certification and compatible with EN12668:2000
standard.
With full WVGA TFT display at industrial level, this instrument offers fine images at different
angles.
Optimized panel, user-friendly design for the menu, easy and fast to operate no matter you
use the left hand or right hand. Various input modes, English/Chinese menu optional.
Auto-calibration function including fast calibrating material velocity, probe delay and probe
angle.
Zoom function for in-gate waveform enables users to observe the waveform detail
conveniently. Zoom function for waveform display area and optimized height-to-width rate of
the screen ensure echo with higher resolution.
DAC: Easy to make, correct, store and recall DAC.
Built-in intelligent lithium battery charger. Power supplied by battery or AC mains and it can
automatically display the power supply modes. Auto switch between “charge” and “work”.
Long battery life of over 8 hours ensures your continuous work.
External USB port for software updating, data transferring and printing and access to devises
such as mouse, keyboard and U-disk.
Specifications
Attenuator Error Per 12dB ±1dB
Equivalent Input Noise <80×10-9 V/√HZ^
Pulse Type -Ve square wave pulse, Transmitter pulse voltage: 25~250V ;
tunable with 25V per step
Pulse Width: 30-1000ns tunable with 5ns per step, Auto/Manual
Working Modes T/R ; T&R
Damping 400 / 80 Ohm
Working Frequency Broadband / Narrowband
Broadband: 0.5~20MHz; Narrowband: 1.5~3MHz
Gain 0.0~110.0 dB;
Step: 0.1 / 1.0 / 2.0 / 6.0 dB
Material Velocity 1000～15000m/s tunable;
Set-in 30 common material velocities as optional
0.0～10000mm Longitudinal wave at steel velocity;
Test Range
Range continuously variable with minimum 0.1mm increments
Rectification Positive wave, Negative wave, Full wave, RF
Real-time alarm signal, positive and negative thresholds,
Gate & Alarm minimum depth, DAC alarm optional
Measuring mode: Select front edge or peak of pulse wave in gate
Display TG, TFT 5.6 inch WVGA color display, resolution 800×480 Pixels
Pulse Shift -7.5~3000µs
Probe Zero 0~999.9µs
PRF (Pulse Repetition 25~800Hz, auto adaptation/manual adjustment
Frequency)
Vertical Linearity Error ≤3%
Horizontal Linearity Error ≤0.2%
Sensitivity Surplus ≥60dB (200Φ2 FBH)
Instrument Resolution ≥36dB (mated with 5MHzΦ14 transducer)
Dynamic Range ≥32dB
Rejection (0~90) %, without any dent to linearity or gain
NL (Electric Noise Level) ＜10%
Ports BNC/ LEMO
USB HOST
Power Supply Large-capacity Li battery(11.1V, 4400mAh) without memory
effect; battery life: 8+ hrs;
In-built battery charger; AC: 220V
Dust \ Splash \ Water Proof IP54
UT Standards Compatible with EN12668-1
Ambient Temperature -30~50℃
Relative Humidity 20%~95%
Weight Around 0.9kg (with battery)
Upper Part: 215mm×126mm×53mm
Dimension
Lower Part: 215mm×104mm×42mm
Advantages:
Square Wave Drive
Higher Resolution Higher Sensitivity
Movable Bracket
Standard Accessories:
No. Item Quantity
1 AFD860 Main Body 1
2 Straight Beam Probe: 2.5MHz, 20mm, BNC Connector 1
Angle Probe: 2.5MHz, 13x13mm, 45 Degree, BNC
3 1
Connector
4 Echo Probe For Horizontal Linearity Calibration 1
5 Machine-probe Cable 2
6 Screw Driver 1
7 Power Adapter (Charger) 1
8 Power Cable 1
9 Rechargeable Battery 1
10 Sling Belt 1
11 Leather Sheath 1
12 Data Software for PC 1
13 Instrument Case 1
14 Manual 1
15 Guarantee Card 1
16 Packing List 1
17 Calibration Certificate 1
Accessories Image:
Straight, Angle, Echo Probe Battery Sling Belt Leather Sheath
Power Adaptor
Probe Cable
Screw Driver
PC Data Software
Power Cable
Suit Case
