3RD QTR SUMMATIVE TEST

TVE-CSS 10

Name: ___________________________________ Section: ___________________________________Date: _____________________ Score:

Direction: Identify what is being asked. Select your 19. What is the primary purpose of manual IP
answers from the box and write them in the space configuration in a computer network?
provided. a. To automatically assign IP addresses to devices
_________1. It is a number that is used to identify a device b. To allow devices to obtain IP addresses from a DHCP
on the server
network. c. To assign a specific IP address to a device,
_________2. It is the way a system is set up. typically for static setups
_________3. The IP address class which indicates that the d. To enable automatic network discovery and mapping
first octet
of the IP address is the network portion.
_________4. The IP address class which indicates that the
first two
octets of the IP address is the network 20. To create an ethernet cable, what is the recommended
portion. length to strip the outer jacket of the network cable before
_________5. This indicates the network portion of an IP proceeding with further steps?
address. A. 1 inch B. ½ inch C. 3 inches D. 2 ½
_________6. It is used to crimp UTP cable to RJ45 connector. inches
_________7. It is the most common cable used in computer 21. What does the acronym UTP stand for in the context of
networking. networking cables?
_________8. The address 255.255.255.0 belongs to what a. Universal Transmission Protocol
class of IP b. Unshielded Twisted Pair
address? c. Unified Telecommunications Platform
_________9. It is a tool used to test functionality of cables, d. Unshielded Transmit Protocol
ports, and network adapters. 22. In a network setup, you want to connect two switches
_________10. It is used to cut away the plastic jacket or together to expand the network capacity. What type of
coating Ethernet cable should you apply to link the two switches
around the wires inside a twisted-pair effectively?
cable a. Straight-through cable b. Fiber optic cable
c. Crossover cable d. Coaxial cable
II. Direction: Choose the best answer. Encircle the Letter of 23. You need to connect a computer to a network switch in
your answer. a large office network. What type of Ethernet cable should
11. An IP address is divided into what two parts? you apply to establish this connection?
a. Physical and logical b. Physical and emotional a. Crossover cable c. Coaxial cable
c. Network and subnet d. Network and host b. Fiber optic cable d. Straight-
12. When using DHCP, how does a device obtain its IP through cable
address automatically? 24. You are setting up a computer network and need to
a. By requesting an IP address from the DNS server assign a specific IP address to a server. Which method of
b. By sending a broadcast request to a DHCP IP configuration should you apply to manually set the
server server's IP address?
c. By manually entering the IP address in the device a. DHCP IP Configuration b. Static
settings IP Configuration
d. By obtaining the IP address from a local file b. Automatic IP Configuration d. Dynamic IP
13. A company needs to connect its offices in different Configuration
countries. Which type of network should they use? 25 Which of the following cables has T568A on one end
a. PAN b. LAN c. WAN d. MAN and T568B on the other?
14. What is the primary function of a crossover cable in a a. Crossover cable b. Straight-through cable
network setup? c. fiber straight cable d. Both A and B
a. To connect a computer to a network switch or hub 26. You are working on a broadband installation project,
b. To extend the length of a network cable and you need to securely fasten connectors to coaxial
c. To enable direct communication between two cables. Which hand tool should you apply to achieve this
devices of the same type task effectively?
d. To connect a computer to a printer a. Cable tester b. Crimping tool
15. Which of the following scenarios would typically c. Multimeter d. Cable stripper
require the use of a straight-through Ethernet cable? 27. what is the IP address class of 150.255.255.254.
a. Connecting a computer directly to another computer a. Class A b. Class B c. Class C d. Class D
for file sharing 28. What type of network connects multiple LANs within a
b. Connecting a computer to a network switch or city, facilitating high-speed data exchange between?
hub a. PAN b. LAN c. WAN d. MAN
c. Extending the length of a network cable 29. You are working on a network configuration where you
d. Connecting a computer to a router need to establish a connection between two switches.
16. What happens if you use a straight-through Ethernet Which type of cable should you analyze and use to ensure
cable instead of a crossover cable to connect two proper communication between the switches?
computers directly? a. Straight-through cable b. Fiber
a. The connection will work as expected. optic cable
b. The connection will not function, and c. Coaxial cable d.
communication between the computers will fail. Crossover cable
c. The computers will experience a power surge. 30. In a network setup, you need to evaluate the most
d. The data transfer speed will increase significantly. appropriate type of Ethernet cable for connecting a
17. In networking cabling, what does the acronym STP computer to a router. Which type of cable should you
stand for? choose, and why?
a. Standard Transmission Protocol a. Straight-through cable because it provides
b. Shielded Twisted Pair maximum bandwidth.
c. Simple Telecommunications Protocol b. Crossover cable because it ensures bidirectional data
d. Security Transmission Protocol flow.
18. According to the "Straight Through" cable diagram, c. Coaxial cable because it offers superior signal quality.
what color of wire is found in pin 5 of a patch cable? d. Fiber optic cable because it's the most versatile
a. White/Orange b. Green 31. You are troubleshooting a network connectivity issue,
c. White/Blue d. White/Brown and you suspect that the Ethernet cable might be the
problem. After evaluating the cable's wiring, you find that
it uses the T568A color code at one end and the T568B 44. It diagrams all the actual components of your network,
color code at the other. What can you conclude about this including cords, plugs, racks, ports, servers, cables, and
cable configuration? more.
a. It is a straight-through cable. a. Physical Topology b. Logical topology
b. It is a crossover cable. c. Mesh Topology d. Star topology
c. It is improperly configured and needs rewiring. 45. The IP address class of 150.255.255.254.
d. It is a fiber optic cable. a. Class A b. Class B c. Class C d. Class D
32. Which of the following is the default subnet mask for 46. It shows the type of network topology (bus, ring, etc.),
the class B IP address? and how the data flows between the physical objects in
a. 255.255.0.0 b. 255.255.255.0 your network.
c. 255.0.0.0 d. 255.255.255.25528. a. Physical Topology b. Logical topology c.
33. Which of the following is an example of a local area Mesh Topology
network (LAN)?
a. The internet
b. A network within a single office building
c. A satellite communication network 47. It is a topology for a Local Area Network (LAN) in which
d. A nationwide banking network all nodes are individually connected to a central
connection point, like a hub or a switch.
a. Star Topology b. Bus Topology
c. Ring Topology d. Tree Topology
48. In this topology, all the nodes are connected in a
closed loop.
34. In which topology does the addition or removal of a. Star Topology b. Bus Topology
devices have minimal impact on the rest of the network? c. Ring Topology d. Tree Topology
a. Bus Topology b. Star Topology 49. It consists of a single cable with the terminator at
c. Ring Topology d. Mesh Topology
35. In Packet Tracer, where can you find the option to add
a router to the network?
a. Tools panel b. Devices panel
c. Connections too d. Simulation mode each end.
36. Which IP address range belongs to Class B IP Address? a. Star Topology b. Bus Topology
a. 10.0.0.0 - 10.255.255.255 b. 172.16.0.0 - c. Ring Topology d. Tree Topology
172.31.255.255 550. This is a "hybrid" topology that combines
c. 192.168.0.0 - 192.168.255.255 d. All of the above characteristics of linear bus and star topologies
37. In a manual IP configuration, what information needs a. Star Topology b. Bus Topology
to be set to ensure proper communication on a network? c. Ring Topology d. Tree Topology
a. Subnet Mask b. Default Gateway 51. It is a cross-platform visual simulation tool designed
c. Both a and b d. Network Name by Cisco Systems that allows users to create network
38. What does DHCP stand for in the context of automatic topologies and imitate modern computer networks.
IP configuration? a. Cisco Packet Tracer
a. Dynamic Host Configuration Protocol b. Cisco Packet Tracer window
b. Domain Host Control Protocol c. Cisco Packet Tracer Logical Workspace
c. Distributed Host Configuration Platform d. None of the above
d. Dynamic Host Computer Platform 52. What part of CISCO packet tracer window is being
39. It is used for testing twisted pair wire connections, with shown on the picture?
RJ11, RJ12, RJ45 connectors.
a. Cable Tester b. multimeter tester
c. loopback adapter d. wire stripper
40. It is a device used to conjoin two pieces of metal by
deforming one or both of them in a way that causes them
to hold each other. a. Menu bar b. Main Toolbar c. Logical Toolbar
a. cable tester b. Crimping tool 53. What part of CISCO packet tracer window is being
c. RJ 45 d. Punch down tool with shown on the picture?
wire striper a. Menu bar b. Main Toolbar c. Logical
41. It is the process of visualizing all the devices on your Toolbar
network, how they’re connected, and how the overall 54. Apply the appropriate IP address and subnet mask for
network is structured. a device on the network if the default gateway is
a. Network Mapping b. Network c. Topology d. 192.168.1.1.
Internet a. IP: 192.168.1.50, Subnet Mask: 255.255.255.0
42. The geometric arrangement of a computer system. b. IP: 192.168.2.10, Subnet Mask: 255.255.255.0
a. Network Mapping b. Network c. Topology d. c. IP: 192.168.1.10, Subnet Mask: 255.255.255.128
Internet d. IP: 192.168.0.5, Subnet Mask: 255.255.255.192
43. It is defined as a group of two or more computer 55. Which network topology is characterized by many redundant
systems linked together. interconnections between network nodes?
a. Network Mapping b. Network c. Topology d. a. Mesh Topology b. Star Topology
Internet c. Bus Topology d. Ring Topology
Answer Key : IDENTIFICATION
1. IP Address
2. System Configuration
3. Class A
4. Class B
5. Subnet mask
6. Crimping tool
7. UTP Cable
8. Class C
9. Cable Tester
10. Wire stripper