Objective type Questions

1. In the following which is not discipline to design RF Circuit. [

]
a) Random signals b) CAD Tools c) Time constant d) Microwave theory.
2. In simple RF Communications Which amplifier are used [
]
a) Single tuned amplifier b) stagger tuned amplifier c) Multistage amplifier d) Power amplifier
3) To design RF Circuit which is the shape is used [
]
a) Pentagon b) Hexagon c)triangle d) Rectangle
4) What is the value of Centre frequency in Generic RF transceiver [
]
a) fc = 3.4 GHz b) 2 GHz c) 2.4 GHz d) 1.4 GHz
5) In parallel RLC tank circuit the quality factor can be find as [
]
a) Q = ω (Energy stored)/ (Power dissipated) b) Q = (Energy stored)/(Average Power
dissipated)
c) Q = ω (Energy stored)/ (Average Power dissipated) d) Q = ω(Energy stored )/(Power dissipated)
6) The average power can be found as [ ]
2 2 2 2 2
a) Pavg = I PK R b) Pavg = 1/2 ( I PK R ) c) Pavg = 1/2 ( I PK R ) d) Pavg = 1/2 ( I PK R )
7) Characteristic impedance of the parallel RLC network [ ]
a) Z0= L/C b) Z0 = √ (L/C) c) Z0 = √ ( LC ) d) Z0 = ( LC )
8) The total energy stored in a parallel RLC network [ ]
2
a) Etotal = 1/2 C ( I PK R ) b) Etotal = 1/2 ( I PK R )
2
c) Etotal = 1/2 C ( I PK R ) d)Etotal = 1/2 C ( I PK ) 2
9) What is the quality factor for RLC parallel network? [ ]
a) Q = ω0RC b) Q = ω0 / RC c) Q = ω0C d) Q = ω0R
10) In maximum power transfer theorem [ ]
a) │ VR │/ ( RL ) = │VS│ / ( ( RL +RS ) +(XL +XS) ) b)│ VR │ / ( RL ) = RS │VS │ / ( ( RL +RS ) +(XL +XS)2
2 2 2 2 2 2 2

)
c) │ VR2 │ / ( RL ) = RS/ ( ( RL +RS )2 d) │ VR2 │ / ( RL ) = RL │VS │2 / (XL +XS)2
11) In parallel RLC network what is ‘Q’ [ ]
a) Q = ω0 LS / Rs b) Q = LS / Rs c) Q = RS / Ls d) Q = ω0 RS / Ls
12)In parallel RLC network what is LP [ ]
2 2 2 2 2 2
a) LP = (Q +1) / Q b) LP= LS [(Q +1) / Q ] c) LP = LS [(Q +1) / Q ] d) LP = LS (Q +1)
13) In parallel RLC network what is RP [ ]
2 2
a) RP = (Q +1 ) b) RP = RS (Q +1 ) c) RP = RS (Q +1 ) d) RP = RS
14) In parallel RLC network what is CP [ ]
2 2
a) CP = Cs( (Q ) / (Q +1 )) b) CP = Cs ( (Q ) / (Q +1 ))
2 2
c) CP = ( (Q ) / (Q +1 ) ) d) CP = Cs ( (Q2 ) / (Q2 +1 ) )
15) In L- matching circuits what is the value of RP [ ]
a) RP = LS / C b) RP = ( 1/Rs ) (LS / C) c) RP = ( 1/Rs ) ( C/ LS) d) RP = ( C/ LS)
16) In L- matching circuits what is the value of ‘Q’ [ ]
a) Q = RP / Rs b) Q = Rs / Rp c) Q = √ (Rs / Rp ) d)Q = √ (Rp / Rs )
17) In π – matching circuits value of Q for right-hand L section [ ]
a) Qright = √ ( ( RP / RI ) -1 ) b) Qright = √ ( RI / RP)
c) Qright = √ ( ( RP / RI ) +1 ) d) Qright = √ ( RP / RI )
18) In π – matching circuits value of Q for Left-hand L section [ ]
a) Qleft = √ ( ( RIN / RI ) +1 ) b) Qleft = √ ( ( RI / RIn ) +1 )
c) Qleft = √ ( ( RI / RIn ) - 1 ) d) Qleft = √ ( ( RIn / RI ) +1 )
19) In π – matching circuits overall network Q is find by [ ]
a) Q = √ ( ( RIn / RI ) -1 ) - √ ( Rp / RI ) -1 b) Q = √ ( ( RIn / RI ) -1 ) + √ ( Rp / RI ) -1
c) Q = √ ( ( RI / RIn ) -1 ) - √ ( Ri / Rp ) -1 d) Q = √ ( ( RI / RIn ) -1 ) + √ ( Ri / Rp ) -1
20) In π – matching circuits the total inductance is found [ ]
a) L1 + L2 =( R I /ω0 ) b) L1 + L2 = ( Q /ω0 )
c) L1 + L2 = Q ( R I /ω0 ) d) L1 + L2 = Q R I
21) In π – matching circuits the value of capacitor ‘ C1’ is found [ ]
a) C1 = Qleft / RIn b) C1 = Qleft / ω0 c) C1 = Qleft / ω0RIn d) C1 = 1 / ω0RIn
22) In π – matching circuits the value of capacitor ‘ C2’ is found [ ]
a) C2 = Qright / ω0Rp b) C2 = Qright / Rp c) C2 = Qright / ω0 d) C2 = Qright / 2Rp
23) What is the value of image resistance in π – matching circuits [ ]
2 2 2 2
a) RI= (RIn + Rp) / (Q) b) RI = (√RIn + √Rp) / (Q)
c) RI= RIn - Rp / (Q) d) RI = (√RIn - √Rp)2 / (Q)2
2

24) In T – matching circuits overall network Q is find by [ ]

a) Q = √ ( ( RI / RIN ) +1 ) + √ ( RI / RS ) +1 b) Q = √ ( ( RI / RIN ) +1 ) - √ ( RI / RS ) +1
c) Q = √ ( ( RI / RIN )) + √ ( RI / RS ) d) Q = √ ( ( RIn / RI ) ) + √ ( RIn / RS )
25) In T-match circuits the capacitance can be calculated as [ ]
a) C1 + C2= Q / ω0 b) C1 + C2 = Q / RI c) C1 + C2 = Q / ω0 RI d)C1 + C2 = 1 / ω0 RI
26) What is the value of ‘ L1’ in T-match circuits [ ]
a) L1 =( QleftRIn ) / ω0 b) L1 =( Qleft ) / ω0 c) L1 =( QleftRIn ) / ω0 Rs d) L1 =( Qleft ) / Rs
27) What is the value of ‘ L2’ in T-match circuits [ ]
a) L2 =( Q right ) / ω0 b) L2 =( Q right ) / Rs c) L2 =( Q right ) / ω0 Rs d) L2 =( Q right ) Rs / ω0
28) What is the Yuan’s capacitance value [ ]
a) CYUAN = ε [ (W/H) - ( ( 2π)/ ( ln [ 1 + ( 2H/T) ( 1 + √ 1+ T/H )) + T/2H ]
b) CYUAN = ε [ (W/H) - ( ( 2π)/ ( ln [ 1 + ( 2H/T) ( 1 + √ 1+ T/H )) - T/2H ]
c) CYUAN = ε [ (W/H) + ( ( 2π)/ ( ln [ 1 + ( 2H/T) ( 1 + √ 1+ T/H )) + T/2H ]
d) CYUAN = ε [ (W/H) + ( ( 2π)/ ( ln [ 1 + ( 2H/T) ( 1 + √ 1+ T/H )) - T/2H ]
29) What is Sakurai capacitance formula [ ]
0.22
a) Csakurai = ε [ (W/H) + (0.15/H) + 2.8 (T/H) ] b) Csakurai = ε [ ( W/H) - ( 0.15/H) + 2.8 (T/H)
0.22
]
c) Csakurai = ε [ ( W/H) - ( 0.15/H) - 2.8 ( T/H) 0.11 ] d) Csakurai = ε [ (W/H) +( 0.15/H) + 2.8 ( T/H)
0.11
]
30) What is the value of capacitance for w = 1.36 , H = 1.65 and T = 0.8 under
Sakurai method [ ]
a)0.145 b) 0.245 c) 0.115 d) 0.135
31) What is the value of capacitance for w = 1.36 , H = 1.65 and T = 0.8 under
Yuan’s method [ ]
a) 0.124 b) 0.134 c) 0.234 d) 0.114
32) What is the value of capacitance for w = 2.38 , H = 0.87 and T = 0.3
under MF method [ ]
a) 0.119 b) 0.290 c) 0.190 d) 0.120
33) What is the value of capacitance for w = 2.38 , H = 0.87 and T = 0.3
under Yuan’s method [ ]
a) 0.172 b) 0.142 c) 0.152 d) 0.132
34) What is the value of capacitance for w = 2.38 , H = 0.87 and T = 0.3 [ ]
a) 0.175 b) 0.195 c) 0.1856 d) 0.285
35) Average function for capacitance load of a single wire between two conducting planes can be
calculated as [ ]
n n n
a) f ( x1 , x2 ) = [( x1 + x2 ) /2 ] b) f ( x1 , x2 ) = [( x1 + x2 ) /2 ]
c) f ( x1 , x2 ) = [( x1n + x2 n ) /2 ]n d) f ( x1 , x2 ) = [( x1n + x2 n ) /2 ]1/n
36) under wire sandwiched between two conducting planes method find the capacitance value
under Sakurai method [
]
a)0.458 f F/ µm b) 0.268 f F/ µm c) 0.468 f F/ µm d) 0.368 f F/ µm
37) What is the formula to find the Single capacitance under three adjacent wires over a
single planes
[ ]
a) Csingle = ε [ (1.15w/H) – 2.8 (T/H)0.222] b) Csingle = ε [ (1.25w/H) + 2.8 (T/H)0.111]
c)Csingle = ε [ (1.15w/H) + 2.8 (T/H)0.222] d) Csingle = ε [ (1.15w/H) – 2.8 (T/H)0.111]
38) What is the standard capacitance formula? [
]
a) C = ε (W/H) b) C = ε (H/W) L c)C = ε (H/W) d) C = ε (W/H) L
39) What is 'n ' value for to design a square spiral inductor [
]
a)n = [ (p)/ (1.2 x 10-6 )]3 b) n = [ (p)/ (1.2 x 10-6 )]3
c) n = [ (L)/ (1.2 x 10-6 )]3 d) n = [ (p)/ (1.2 x 10-6 )]1/3
40) In model on-chip spiral inductor what is 'RS' [
]
a) RS = [ L / (W . σ (1+ e -(t/δ) b) RS = [ L / (W . σ (1- e -(t/δ) )
c) RS = [ L / (W . σ (1+ e (t/δ) d) RS = [ L / (W . σ (1 - e (t/δ) )