Scribd
Upload
11 views10 pages

Ruijie Router

The Ruijie RG-EW1200 User Guide provides detailed instructions on router specifications, accessing the router, changing the login password, checking connected devices, and configuring WAN interfaces. It also includes steps for setting up the router as an access point, basic Wi-Fi configurations, and using wireless MAC filtering. The guide is structured to assist users in effectively managing their router settings and connectivity.

Uploaded by

Mba Bhai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views10 pages

Ruijie Router

The Ruijie RG-EW1200 User Guide provides detailed instructions on router specifications, accessing the router, changing the login password, checking connected devices, and configuring WAN interfaces. It also includes steps for setting up the router as an access point, basic Wi-Fi configurations, and using wireless MAC filtering. The guide is structured to assist users in effectively managing their router settings and connectivity.

Uploaded by

Mba Bhai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

01

Ruijie

RG-EW1200

User Guide

Table of Contents
1. Router Specifications

1.1 Front Panel

1.2 Rear Panel

2. Accessing the Router

3. Changing Login Password

4. Check Connected Devices with the Router

5. WAN Interface (PPPoe/DHCP/Static)

6. Configuring Router as an Access Point

7. Basic Wi-F Configurations

8. Wireless MAC Filtering

1441 +92 (51) 111 11 44 44


02

Router Specifications

Figure 1: Ruijie Router

1.1 Front Panel


The router’s LEDs are located on the front panel.

Figure 2: Front Panel

1.2 Rear Panel

Figure 3: Rear Panel

1441 +92 (51) 111 11 44 44


03

Accessing the Router


Step 1: Connect your device with Router
Connect your end device (Laptop/PC) to router’s network via Wi-Fi or LAN port.

For Wi-Fi Connect the Wi-Fi of your device with the Router’s Wi-Fi.
For Ethernet Connect the ethernet port of your device with any LAN port of the router.

Step 2: Get the IP Address


Open the Ruijie web interface through the IP address 192.168.110.1 or check on backside of
your router. You can also get the IP address by running ipconfig command in CMD and look
for default gateway.

By default, there is no username or password and can be set up initially.

Step 3: Do Initial Settings to configure Router


This interface appears after page loading is successful. Click on configure.

1441 +92 (51) 111 11 44 44


04

Update SSID, Wi-Fi password and time settings and click on Next.

When your Wi-Fi settings are successfully upgraded, it will disconnect Wi-Fi. Enter the
password mentioned earlier and reconnect.

When the W-Fi is reconnected, some basic router details related to Internet and Wi-Fi will
appear. Click on Next and the following web interface is displayed.

1441 +92 (51) 111 11 44 44


05

Changing Login Password


For changing router login password; Go to profile option on the top right of web interface
and select change password.

OR

Click on More >> Select System >> Click on Login.

Enter Old password (same as Wi-Fi password) and enter new password. Click Save.

Enter the updated login password on this page to login.

1441 +92 (51) 111 11 44 44


06

Check Connected Devices with the Router


To check connected devices

Go to More Option >> Click on LAN >> Open DHCP Clients

All the connected devices with their MAC Addresses wil appear.

You can also check the connected devices in the Clients Option.

1441 +92 (51) 111 11 44 44


07

WAN Interface (PPPoE/DHCP/Static)


Click on WAN >> Click Internet.

In drop down menu, Select Internet type DHCP/PPPoE/Static IP according to your


connection with ISP.

By default settings are DHCP.

For PPPoE dialing in router and main ONT acting as a bridge, Get PPPoE credentials from
your ISP.

1441 +92 (51) 111 11 44 44


08

Configuring Router as an Access Point/Signal Booster


Click on More Option >> Select Work Mode >> Select Access Point >> Click on Check.

Confirm SSID and password. Click on Save. Your router is now configured as an Access Point.
You can also configure it as Wireless Extender/Repeater by selecting the option.

Basic Wi-F Configurations


To check Wi-Fi configurations

Go to More Option >> Click on WLAN >> Select Wi-Fi >> Set password and security
parameter.

1441 +92 (51) 111 11 44 44


09

Click on Radio Frequency to select region and channel for 2.4G and 5G.

After successful login, following page appears. Provides current status information about the
router.

1441 +92 (51) 111 11 44 44


10

Wireless MAC Filtering


To block/allow any device to connect to Wi-Fi MAC Filtering is used.

Go to More Option >> Click on WLAN >> Select Blocklist/Allow list. Add MAC address of
device on which function is to be performed. Click on Add. MAC will be added to the list.

This Pop-up appears after clicking on Add.

1441 +92 (51) 111 11 44 44

You might also like