DataLocker Sentry ONE DataSheet
DataLocker Sentry ONE DataSheet
FIPS 140-2 Level 3 Certified Tamper evident seal and Remotely manageable with
Hardware-based AES 256- waterproof up to ~5 ft SafeConsole
bit XTS mode encryption Conforms to IEC 60529 IPX8
IP68 Certified
DataLocker Sentry ONE offers advanced security with FIPS 140-2 Level 3 certification and a tamper evident seal for physical security.
The entire drive is FIPS certified, not just the controller, and its AES 256-bit hardware-based encryption in XTS mode offers unsurpassed
security.
Powerful Encryption Right Protect Data at Scale Remotely Manage & Audit
Out Of The Box Your Entire Fleet
Everything you need to Remote management Sentry ONE drives are
encrypt data is built into available with SafeConsole®, remotely manageable with
the FIPS 140-2 Level 3 lets admins fully control or SafeConsole, giving admins
certification. No drivers. terminate devices over the the ability to remotely lock or
No setup. Just iron-clad, Internet. Rapid, no-hands, wipe drives, reset passwords,
hardware-based AES automated deployment view last-used locations,
256-bit encryption in an at scale is available for and see what data has been
easy-to-use interface, which managed Sentry ONE added, removed, or changed
is further guarded by an drives. on the drive. Set device or
army of automated security group-specific policies for all
policies. the drives in your fleet.
datalocker.com | [email protected]
DISTRIBUTED BY DATALOCKER INC. ©2023 DATALOCKER, INC. ALL RIGHTS RESERVED. DATALOCKER IS A REGISTERED TRADEMARKS OF DATALOCKER INC. ALL OTHER TRADEMARKS ARE PROPERTY OF THEIR RESPECTIVE OWNERS. 04/2023
THE SENTRY ONE ENCRYPTED FLASH DRIVE
FIPS 140-2 LEVEL 3 ADMIN POLICIES & USER FULLY MANAGEABLE BRUTE FORCE PASSWORD
CERTIFICATION DATA RECOVERY DEVICE PROTECTION
FIPS 140-2 level 3 Admins can set rigorous Use DataLocker SafeConsole Admins can configure how
certification. Provides password policies (non- to manage individual and many failed password
always-on hardware based sequential, non-repeating groups of devices using attempts are needed
encryption. Dedicated AES special characters, minimum automated policies. before the device destroys
256-bit XTS mode crypto characters). Should users its payload.
engine meets rigorous forget a password, admins READ-ONLY MODE
cryptographic standards can generate a Recovery Code Admins can configure the
and is more secure than that allows the user to access Sentry ONE to read-only
software-based alternatives. their device and change their mode, ensuring that no
Hardened internals and password without losing any malicious data can be
enclosure for increased data. written to the device.
physical security.
TECHNICAL SPECIFICATIONS
datalocker.com | [email protected]
DISTRIBUTED BY DATALOCKER INC. ©2023 DATALOCKER, INC. ALL RIGHTS RESERVED. DATALOCKER IS A REGISTERED TRADEMARKS OF DATALOCKER INC. ALL OTHER TRADEMARKS ARE PROPERTY OF THEIR RESPECTIVE OWNERS. 04/2023