Scribd
Upload
10 views5 pages

Electromagnetic Field Theory - Weekly Test 05 - Test Paper

The document contains a series of questions and answers related to transmission lines, including calculations for VSWR, input impedance, voltage measurements, and reflection coefficients. It also provides hints and solutions for each question, along with specific values for various parameters. The content is targeted towards students preparing for the GATE exam in Electrical and Communication Engineering (ECE).

Uploaded by

21R21A0471 APPALA BALAJI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views5 pages

Electromagnetic Field Theory - Weekly Test 05 - Test Paper

The document contains a series of questions and answers related to transmission lines, including calculations for VSWR, input impedance, voltage measurements, and reflection coefficients. It also provides hints and solutions for each question, along with specific values for various parameters. The content is targeted towards students preparing for the GATE exam in Electrical and Communication Engineering (ECE).

Uploaded by

21R21A0471 APPALA BALAJI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

GATE

WEEKLY TEST-5
ECE
EMFT

Q1 A lossless transmission line characterized by Z0 = R = 4 Ω/m, G = 1.6 mS/m, L = 0.25 µH/m and C =
100Ω is terminated in a load ZL = (100 + j50)Ω. 100 pF/m.
The VSWR across the transmission line is _______. Which of the following(s) is/are correct?
(A) The characteristic impedance of transmission
Q2 Consider the lossless transmission line shown
line is 50Ω.
below:
(B) The signal applied to the cable is delayed by 1
µs before measured at he receiving end.
(C) An attenuation of 139 dB is observed at the
receiving end.
(D) The phase velocity of signal in the
transmission line is 2 × 108 ms–1.
The SWR is
(A) 2.08 (B) 1.63 Q5 The quarter-wave lossless 100Ω line is
(C) 2.44 (D) 1.93 terminated by load ZL = 210 Ω. If the voltage at
the receiving end is 60 V, the voltage at the
Q3 Consider the lossless transmission line shown
sending end is
below:
(A) 126 V (B) 28.6 V
(C) 29.3 V (D) 169 V

Q6 A 75-ohm transmission line is first short-circuited


and the location of maxima is noted. The short
circuit is now replaced by a resistive load RL. The
The input impedance Zin at the generator is location of maxima is now shifted by a quarter
(A) 36 + j32.4 Ω wavelength. The VSWR is measured to be 4, then
(B) 18 + j16.2 Ω the value of RL will be _______ohm.
(C) 35 – j24.8 Ω
Q7 The reflection coefficient at a distance 'l' from
(D) 54 + j26.4 Ω
the load is 0.5∠–60° in a lossless transmission
Q4 A distortion less cable is 200m long and has line having characteristic 50Ω. The magnitude of

Android App | iOS App | PW Website


GATE

input impedance at distance 'l' from load will be then S11 parameter for the resultant network is
________ (Ω). ________.

Q8 A lossless transmission line has a 50 Ω


characteristic impedance the line is terminated in
a load impedance of (50 – j100)Ω. The maximum
voltage measured on the line is 100 V. Which of
the following(s) is/are correct? Q11 Two l/4 transformers in tandem are to connect a
(A) The minimum voltage measured on the line is 50Ω line to a 75Ω as shown in figure.
17.157 Volt.
(B) The maximum current measured on the line is
2 A.
(C) The minimum current measured on the line is
0.3415 A.
(D) The distance from the load the at which first
7λ
maxima of voltage is measured is 16 .
If Z02 = 30Ω and no reflected wave at AB then
Q9 Consider a 300Ω, half wave long (at 1 GHz) Z01 is _______(Ω).
transmission line as shown in the figure. It is
Q12 A quarter-wave lossless 100Ω line is terminated
connected to 10V, 50Ω source at one end and is
by a load ZL = 210Ω. The voltage at the load is
short circuited at the other end. The current at
84V, then voltage at sending end is?
the short circuit of the line is _______A.

(A) 20 V (B) 80 V
Q10 A two-part network has scattering parameters
(C) 40 V (D) 120 V
given by,
−1 2 Q13 The reflection coefficient on a 1000m long
[S] = [ 3
2
3
−1
] lossless transmission line has a phase angle of
3 3
130°. The operating frequency is 1.5 MHz, then
If the port-2 of the two port is connected with
load impedance 100 Ω as shown in the figure,

Android App | iOS App | PW Website


GATE

the difference between the number of voltage (A) 0 (B) 1


maxima and voltage minima is _______. (C) 2 (D) 3

Android App | iOS App | PW Website


GATE

Answer Key
Q1 1.64 Q8 (A, B, C, D)

Q2 (A) Q9 –0.2

Q3 (C) Q10 -0.2

Q4 (A, B, C, D) Q11 24.5

Q5 (B) Q12 (C)

Q6 300 Q13 (A)

Q7 76.38

Android App | iOS App | PW Website


GATE

Hints & Solutions


Q1 Text Solution: 76.38
1.64 Q8 Text Solution:
Q2 Text Solution: (A, B, C, D)
(A) Q9 Text Solution:
Q3 Text Solution: –0.2
(C) Q10 Text Solution:
Q4 Text Solution: -0.2
(A, B, C, D) Q11 Text Solution:
Q5 Text Solution: 24.5
(B)
Q12 Text Solution:
Q6 Text Solution: (C)
300Ω Q13 Text Solution:
Q7 Text Solution: (A)

Android App | iOS App | PW Website

You might also like