Algorithm & Flowchart Manual
ALGORITHM & FLOWCHART
ALGORITHM:
The word “algorithm” relates to the name of the mathematician Al-khowarizmi, which means a
procedure or a technique. Software Engineer commonly uses an algorithm for planning and
solving the problems. An algorithm is a sequence of steps to solve a particular problem or
algorithm is an ordered set of unambiguous steps that produces a result and terminates in a
finite time
Algorithm has the following characteristics
• Input: An algorithm may or may not require input
• Output: Each algorithm is expected to produce at least one result
• Definiteness: Each instruction must be clear and unambiguous.
• Finiteness: If the instructions of an algorithm are executed, the algorithm should
terminate after finite number of steps
The algorithm and flowchart include following three types of control structures.
1. Sequence: In the sequence structure, statements are placed one after the other and
the execution takes place starting from up to down.
2. Branching (Selection): In branch control, there is a condition and according to a
condition, a decision of either TRUE or FALSE is achieved. In the case of TRUE, one
of the two branches is explored; but in the case of FALSE condition, the other
alternative is taken. Generally, the ‘IF-THEN’ is used to represent branch control.
3. Loop (Repetition): The Loop or Repetition allows a statement(s) to be executed
repeatedly based on certain loop condition e.g. WHILE, FOR loops.
Advantages of algorithm
• It is a step-wise representation of a solution to a given problem, which makes it easy
to understand.
• An algorithm uses a definite procedure.
• It is not dependent on any programming language, so it is easy to understand for
anyone even without programming knowledge.
• Every step in an algorithm has its own logical sequence so it is easy to debug.
1 CIC-UHF
Algorithm & Flowchart Manual
HOW TO WRITE ALGORITHMS
Step 1 Define your algorithms input: Many algorithms take in data to be processed, e.g. to
calculate the area of rectangle input may be the rectangle height and rectangle width.
Step 2 Define the variables: Algorithm's variables allow you to use it for more than one
place. We can define two variables for rectangle height and rectangle width as HEIGHT and
WIDTH (or H & W). We should use meaningful variable name e.g. instead of using H & W
use HEIGHT and WIDTH as variable name.
Step 3 Outline the algorithm's operations: Use input variable for computation purpose,
e.g. to find area of rectangle multiply the HEIGHT and WIDTH variable and store the value in
new variable (say) AREA. An algorithm's operations can take the form of multiple steps and
even branch, depending on the value of the input variables.
Step 4 Output the results of your algorithm's operations: In case of area of rectangle
output will be the value stored in variable AREA. if the input variables described a rectangle
with a HEIGHT of 2 and a WIDTH of 3, the algorithm would output the value of 6.
FLOWCHART:
The first design of flowchart goes back to 1945 which was designed by John Von Neumann.
Unlike an algorithm, Flowchart uses different symbols to design a solution to a problem. It is
another commonly used programming tool. By looking at a Flowchartone can understand the
operations and sequence of operations performed in a system. Flowchart is often considered
as a blueprint of a design used for solving a specific problem.
Advantages of flowchart:
• Flowchart is an excellent way of communicating the logic of a program.
• Easy and efficient to analyze problem using flowchart.
• During program development cycle, the flowchart plays the role of a blueprint, which
makes program development process easier.
• After successful development of a program, it needs continuous timely maintenance
during the course of its operation. The flowchart makes program or system
maintenance easier.
• It is easy to convert the flowchart into any programming language code.
Flowchart is diagrammatic /Graphical representation of sequence of steps to solve a
problem. To draw a flowchart following standard symbols are use
2 CIC-UHF
Algorithm & Flowchart Manual
Symbol Name Symbol function
Used to represent start and
Oval end of flowchart
Used for input and output
Parallelogram
operation
Processing: Used for
Rectangle arithmetic operations and
data-manipulations
Decision making. Used to
represent the operation in
Diamond which there are two/three
alternatives, true and false
etc
Flow line Used to indicate
Arrows the flow of logic by
connecting symbols
Circle Page Connector
Off Page Connector
Predefined Process
/Function Used to represent
a group of statements
performing one processing
task.
Preprocessor
|--------------
--------- | Comments
|--------------
The language used to write algorithm is simple and similar to day-to-day life language. The
variable names are used to store the values. The value store in variable can change in the
3 CIC-UHF
Algorithm & Flowchart Manual
solution steps. In addition some special symbols are used as below Assignment Symbol
( or =) is used to assign value to the variable.
e.g. to assign value 5 to the variable HEIGHT, statement is
HEIGHT 5
or
HEIGHT = 5
The symbol ‘=’ is used in most of the programming language as an assignment symbol, the
same has been used in all the algorithms and flowcharts in the manual.
The statement C = A + B means that add the value stored in variable A and variable B
then assign/store the value in variable C.
The statement R = R + 1 means that add I to the value stored in variable R and then
assign/store the new value in variable R, in other words increase the value of variable R by 1
Mathematical Operators:
Operator Meaning Example
+ Addition A+B
- Subtraction A–B
* Multiplication A*B
/ Division A/ B
^ Power A^3 for A3
% Reminder A%B
Relational Operators
Operator Meaning Example
< Less than A<B
<= Less than or equal to A <= B
= or == Equal to A = B
# or != Not equal to A # B or A !=B
> Greater than A>B
>= Greater tha or equal to A >= B
Logical Operators
Operator Example Meaning
AND A < B AND B < C Result is True if both A<B and
B<C are true else false
4 CIC-UHF
Algorithm & Flowchart Manual
OR A< B OR B < C Result is True if either A<B or
B<C are true else false
NOT NOT (A >B) Result is True if A>B is false
else true
Selection control Statements
Selection Control Example Meaning
IF ( Condition ) Then IF ( X > 10 ) THEN If condition X>10 is True
… Y=Y+5 execute the statement
ENDIF ENDIF between THEN and ENDIF
IF ( Condition ) Then IF ( X > 10 ) THEN If condition X>10 is True
… Y=Y+5 execute the statement
ELSE ELSE between THEN and ELSE
….. Y=Y+8 otherwise execute the
Z=Z+3 statements between ELSE
ENDIF ENDIF and ENDIF
Loop control Statements
Selection Control Example Meaning
WHILE (Condition) WHILE ( X < 10) Execute the loop as long as
DO DO the condition is TRUE
.. print x
.. x=x+1
ENDDO ENDDO
DO DO Execute the loop as long as
…. print x the condition is false
… x=x+1
UNTILL (Condition) UNTILL ( X >10)
GO TO statement also called unconditional transfer of control statement is used to transfer
control of execution to another step/statement. . e.g. the statement GOTO n will transfer
control to step/statement n.
Note: We can use keyword INPUT or READ or GET to accept input(s) /value(s) and
keywords PRINT or WRITE or DISPLAY to output the result(s). ..
Algorithm & Flowchart to find the sum of two numbers
5 CIC-UHF
Algorithm & Flowchart Manual
Algorithm
Step-1 Start
Step-2 Input first numbers say A
Step-3 Input second number say B
Step-4 SUM = A + B
Step-5 Display SUM
Step-6 Stop
OR
Algorithm
Step-1 Start
Step-2 Input two numbers say A & B
Step-3 SUM = A + B
Step-4 Display SUM
Step-5 Stop
6 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to convert temperature from Celsius to Fahrenheit
C : temperature in Celsius
F : temperature Fahrenheit
Algorithm
Step-1 Start
Step-2 Input temperature in Celsius say C
Step-3 F = (9.0/5.0 x C) + 32
Step-4 Display Temperature in Fahrenheit F
Step-5 Stop
Algorithm & Flowchart to convert temperature from Fahrenheit to Celsius
C : temperature in Celsius
F : temperature Fahrenheit
Algorithm
Step-1 Start
Step-2 Input temperature in Fahrenheit say F
Step-3 C = 5.0/9.0 (F - 32 )
Step-4 Display Temperature in Celsius C
Step-5 Stop
Algorithm & Flowchart to find Area and Perimeter of Square
7 CIC-UHF
Algorithm & Flowchart Manual
..
L : Side Length of Square
AREA : Area of Square
PERIMETER : Perimeter of Square
Algorithm
Step-1 Start
Step-2 Input Side Length of Square say L
Step-3 Area = L x L
Step-4 PERIMETER = 4 x L
Step-5 Display AREA, PERIMETER
Step-6 Stop
Algorithm & Flowchart to find Area and Perimeter of Rectangle
L : Length of Rectangle
B : Breadth of Rectangle
AREA : Area of Rectangle
PERIMETER : Perimeter of Rectangle
Algorithm
Step-1 Start
Step-2 Input Side Length & Breadth say L, B
Step-3 Area = L x B
Step-4 PERIMETER = 2 x ( L + B)
Step-5 Display AREA, PERIMETER
Step-6 Stop
find Area and Perimeter of Circle
8 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
R : Radius of Circle
AREA : Area of Circle Start
PERIMETER : Perimeter of Circle
Algorithm Input Value
of R
Step-1 Start
Step-2 Input Radius of Circle say R AREA = 22.0/7.0
xRx R
Step-3 Area = 22.0/7.0 x R x R
Step-4 PERIMETER = 2 x 22.0/7.0 x R PERIMTER = 2 X
22.0/7.0 x R
Step-5 Display AREA, PERIMETER
Step-6 Stop Pr int A REA,
PER I M T ER
Stop
Algorithm & Flowchart to find Area & Perimeter of Triangle
(when three sides are given)
A : First Side of Triangle
B : Second Side of Triangle
C : Third Side of Triangle
AREA : Area of Triangle
PERIMETER : Perimeter of Triangle
Algorithm
Step-1 Start
Step-2 Input Sides of Triangle A,B,C
Step-3 S= (A + B + C)/ 2.0
Step-4 AREA = SQRT(S x (S-A) x (S-B) x(S-C))
Step-5 PERIMETER = S1 + S2 + S3
Step-6 Display AREA, PERIMETER
Step-7 Stop
9 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to find Simple Interest
P : Principle Amount
N : Time in Years
R : % Annual Rate of Interest
SI : Simple Interest
Algorithm
Step-1 Start
Step-2 Input value of P, N, R
Step-3 SI = (P x N x R)/100.0
Step-4 Display SI F
Step-6 Stop
Algorithm & Flowchart to find Compound Interest
P : Principle Amount
N : Time in Years
R : % Annual Rate of Interest
CI : Compound Interest
Algorithm
Step-1 Start
Step-2 Input value of P, N, R C
Step-3 CI = P(1+R/100)N - P
Step-4 Display CI
Step-6 Stop
..
10 CIC-UHF
Algorithm & Flowchart Manual
Algorithm & Flowchart to
..
Swap Two Numbers using Temporary Variable
Algorithm
Step-1 Start
Step-2 Input Two Numbers Say NUM1,NUM2
Step-3 Display Before Swap Values NUM1, NUM2
Step-4 TEMP = NUM1
Step-5 NUM1 = NUM2
Step-6 NUM2 = NUM1
Step-7 Display After Swap Values NUM1,NUM
Step-8 Stop
Algorithm & Flowchart to Swap Two Numbers without using temporary variable
11 CIC-UHF
Algorithm & Flowchart Manual
Algorithm
Step-1 Start
Step-2 Input Two Numbers Say A,B
Step-3 Display Before Swap Values A, B
Step-4 A=A+B
Step-5 B=A-B
Step-6 A=A-B
Step-7 Display After Swap Values A, B
Step-8 Stop
..
Algorithm & Flowchart to find the smallest of two numbers
Algorithm
Step-1 Start
Step-2 Input two numbers say
NUM1,NUM2
Step-3 IF NUM1 < NUM2 THEN
print smallest is NUM1
ELSE print smallest is
NUM2
ENDIF
Step-4 Stop
12 CIC-UHF
Algorithm & Flowchart Manual
Algorithm & Flowchart to
Algorithm & Flowchart to find the largest of two numbers
Algorithm
Start
Step-1 Start
Step-2 Input two numbers say
I nput V alue
NUM1,NUM2 of NUM1
Step-3 IF NUM1 > NUM2 THEN
print largest is NUM1 Input Value
of NUM2
ELSE print largest is NUM2
ENDIF Print Yes No Print
if
Largest is NUM1 > NUM2
Largest is
NUM1 NUM2
Step-4 Stop
Stop
13 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
find the largest of three numbers
Algorithm
Step-1 Start
Step-2 Read three numbers say num1,num2, num3
Step-3 if num1>num2 then go to step-5
Step-4 IF num2>num3 THEN
print num2 is largest
ELSE
print num3 is largest
ENDIF
GO TO Step-6
Step-5 IF num1>num3 THEN
print num1 is largest
ELSE
print num3 is largest
ENDIF
14 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
..
Algorithm & Flowchart to find the largest of three numbers (an another way)
Algorithm
Step-1 Start
Step-2 Read three numbers say A,B,C
Step-3 BIG = A
Step-4 IF B > BIG THEN
BIG = B
ENDIF
Step-5 IF C >BIG THEN
BIG = C
ENDIF
Step-6 Write BIG
Step-7 Stop
15 CIC-UHF
Algorithm & Flowchart Manual
find Even number between 1 to 50
Step-2 I=1
Step-3 IF (I >50) THEN
GO TO Step-7
ENDIF
Step-4 IF ( (I % 2) =0) THEN
Display I
ENDIF
Step-5 I=I+1
Step-6 GO TO Step--3
Step-7 Stop
Algorithm & Flowchart to find Odd numbers between 1 to n where n is a
positive Integer
Algorithm
Step-1 Start
Step-2 Input Value of N
Step-3 I=1
Step-4 IF (I >N) THEN
GO TO Step-8
ENDIF
Step-5 IF ( (I % 2)=1) THEN
Display I
ENDIF
Step-6 I=I+1
Step-7 GO TO Step-4
Step-8 Stop
16 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
..
Algorithm & Flowchart to find sum of series 1+2+3+…..+N
Algorithm
Step-1 Start
Step-2 Input Value of N
Step-3 I = 1, SUM=0
Step-4 IF (I >N) THEN
GO TO Step-8
ENDIF
Step-5 SUM = SUM + I
Step-6 I=I+1
Step-7 Go to step-4
Step-8 Display value of SUM
Step-9 Stop
17 CIC-UHF
Algorithm & Flowchart Manual
Algorithm & Flowchart to find sum of series 1+3+5+…..+N, Where N is positive
odd Integer
Algorithm
Algorithm
Step-1 Start
Step-2 Input Value of N
Step-3 I = 1, SUM=0
Step-4 IF (I >N) THEN
GO TO step 8
ENDIF
Step-5 SUM = SUM + I
Step-6 I=I+2
Step-7 Go to step-4
Step-8 Display value of SUM
Step-9 Stop
find sum of series 1 – X + X2 –X3 ….XN
Step-2 Input Value of N, X
Step-3 I = 1, SUM=1, TERM=1
Step-4 IF (I >N) THEN
GO TO Step-9
ENDIF
Step-5 TERM = - TERM * X
Step-6 SUM = SUM + TERM
Step-7 I=I+1
Step-8 Go to step-4
Step-9 Display value of SUM
Step-10 Stop
18 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
Algorithm & Flowchart to print multiplication Table of a number
Algorithm
Step-1 Start
Step-2 Input Value of NUM
Step-3 I=1
Step-4 IF (I >10) THEN
GO TO Step 9
ENDIF
Step-5 PROD = NUM * I
Step-6 WRITE I “x” NUM “=” PROD
Step-7 I=I+1
Step-8 Go to step-4
Step-9 Stop
..
Algorithm & Flowchart to generate first n Fibonacci terms 0,1,1,2,3,5…n (n>2)
19 CIC-UHF
Algorithm & Flowchart Manual
Algorithm
Step-1 Start
Step-2 Input Value of N
Step-3 A=0, B=1, COUNT=2
Step-4 WRITE A, B
Step-5 IF (COUNT >N) then go to step 12
Step-6 NEXT= A + B
Step-7 WRITE NEXT
Step-8 A=B
Step-9 B=NEXT
Step-10 COUNT=COUNT + 1
Step-11 Go to step-4
Step-12 Stop
20 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
find sum and average of given series of numbers
Step-2 COUNT=0
Step-3 SUM=0
Step-4 Input NUM (next number in series)
Step-5 SUM= SUM +NUM
Step-6 COUNT=COUNT+1
Step-7 IF More Number in Series then
GOTO Step-4
ENDIF
Step-8 AVERGAE=SUM / COUNT
Step-9 WRITE SUM, AVERAGE
Step-10 Stop
21 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
find Roots of Quadratic Equations
AX2+BX+C=0
Step-2 Input A,B,C
Step-3 DISC= B2 – 4 A * C
Step-4 IF (DISC < 0) THEN
Write Roots are Imaginary
Stop
ENDIF
Step-5 IF (DISC==0) THEN
Write Roots are Real and Equal
X1 = - B/(2*A)
Write Roots are X1,X1
Stop
ENDIF
Step-6 IF (DISC >0)
Write Roots are Real and Unequal
X1= (- B + SQRT(DISC)) / (2*A)
X2= (- B + SQRT(DISC)) / (2*A)
Write Roots are X1,X2
22 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
Stop
ENDIF
23 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
find if a number is prime or not
Step-2 Input NUM
Step-3 R=SQRT(NUM)
Step-4 I=2
Step-5 IF ( I > R) THEN
Write NUM is Prime Number
Stop
ENDIF
Step 6 IF ( NUM % I ==0) THEN
Write NUM is Not Prime
Stop
ENDIF
Step-7 I=I+1
Step-8 Go to Step-5
24 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
Algorithm
Step-1 Start
find GCD and LCM of two numbers
Algorithm
Step-1 Start
Step-2 Read two number A, B
Step-3 IF (A > B) THEN
N =A
D=B
ELSE
N=B
D=A
ENDIF
Step-4 r=N/D
Step-5 WHILE (r != 0)
DO
N=D D=r
r =N%D
DONE
Step-6 gcd=d
Step-7 lcm = (a*b)/gcd
Step-8 Display gcd, lcm
Step-9 Stop
25 CIC-UHF
Algorithm & Flowchart Manual
..
Algorithm & Flowchart to
26 CIC-UHF
Algorithm & Flowchart Manual
Algorithm & Flowchart to find Factorial of number n ( n!=1x2x3x…n)
Algorithm
Step-1 Start
Step-2 Read number N
Step-3 FACT=1 CTRL=1
Step-4 WHILE (CTRL <= N)
DO
FACT=FACT*I
CTRL=CTRL+1
DONE
Step-5 Display FACT
Step-6 Stop
Algorithm & Flowchart to find all the divisor of a number
27 CIC-UHF
Algorithm & Flowchart Manual
Algorithm
Step-1 Start
Step-2 Read number N
Step-3 D=1
Step-4 WHILE (D< N)
DO
IF ( N % D ==0) THEN
PRINT D
ENDIF
D=D+1
DONE
Step-5 Stop
28 CIC-UHF
