Scribd
Upload
18 views17 pages

Ewm PP

The document outlines the steps for integrating the EWM staging process with production planning in SAP EWM, detailing the creation of materials, BOM, work centers, and routing. It emphasizes the importance of configuring stock type determination and warehouse process types to ensure accurate staging of components for production. Additionally, it provides instructions for setting up the necessary configurations in both S4 and EWM systems to facilitate the production material request (PMR) process.

Uploaded by

G LI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
18 views17 pages

Ewm PP

The document outlines the steps for integrating the EWM staging process with production planning in SAP EWM, detailing the creation of materials, BOM, work centers, and routing. It emphasizes the importance of configuring stock type determination and warehouse process types to ensure accurate staging of components for production. Additionally, it provides instructions for setting up the necessary configurations in both S4 and EWM systems to facilitate the production material request (PMR) process.

Uploaded by

G LI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 17

SAP EWM Part 25: Integrating EWM Staging Process for

Production Planning | SAP EWM-PP Advanced Integration

SAP EWM Part 25: Integrating EWM Staging Process for


Production Planning | SAP EWM-PP Advanced Integration | by
Manish Gupta | Medium

Step 1: Create Material Master — 2 raw materials and 1 Finished


Good

Step 2: Create BOM — CS01

Step 3: Create PSA in S4 — PK05

Step 4: Create Work center — CR01

Step 5: Create Routing for FG — CA01


Once BOM and Routing are created, maintain the production version for
the finished good in the material master data.

Step 6: Create Control Cycles for Components in S4 — LPk1

The staging indicator needs to be 5 which stands for EWM Staging and the
Staging type will be selected in the EWM system.

This is all we need to do from the S4/ERP side and now we will cover the
configuration and master data needed in the EWM system to carry out the
Staging for Production.

Step 7: Activate below BC Sets below by using SCPR20 Tcode first

/SCWM/PMR

Step 8: Now we need to set up the PSA Area in EWM.

First, we will create a Storage Type (1000) which will used as a PSA Area.
Here StrType Role K stands for Production Supply.
Now we need to create a Bin which will act as a physical area for
Production Supply and all the components will be stagged in this bin.

Tcode: /SCWM/LS01

Step 9: Now we need to define the Document type for PMR which
will get created in the EWM system once we trigger WM stagging
from our production order.

spro/ Define Document Types for Production


If we have activated the BC sets correctly, Doc type PMR and Doc
Category PWR will be already available along with item types and allowed
item types for production.

Step 10: Now we will map the ERP doc type with the EWM doc
type to create PMR in the EWM system.

Spro/interface/integration erp/ Map SAP ERP Order Type to SAP EWM


Document Type
Step 11: Ahora necesitamos crear un WPT para preparar los
componentes a llevar y un WPT para vaciar el contenedor PSA en
caso de que aún quede stock una vez que el ciclo de producción
ha terminado.

Spro/cross process/ Define Warehouse Process Type

Este es el nuevo configurado:


Step 12: Now we will set up WPT determination and Stock
removal strategy for our product.

Spro/cross/ Determine Warehouse Process Type


we already created picking strategy, we will just add the indicator in
product master for our components.

Step 13: Create PSA in EWM — /n/scwm/psa_replicate


We can also create and assign the PSA bins in EWM with TCode
/n/scwm/psamap

Step 14: Define product group and product group type


Step 15: Maintain Product group in material master in Basic data
2 View, we are only going to use the CrossOrder Staging method
in this blog.

Step 16: Assign Bin to PSA/Product/Party entitled in EWM —


/SCWM/PSASTAGE
We have maintained this for our product group, this can also be done for
the each component individually.

Step 17: MaintainProduct Group Type and Warehouse Parameters


for Production
Now we will create a production Order in the S4 system and try to
generate a PMR doc in the EWM system.
CO01

Release the ProdOrder : CO02

Carry out WM staging from change mode by clicking on execute button.


Save the ProdOrder and check Warehouse monitor for PMR

Now we can start with the staging process by using tcode /SCWM/STAGE

We can also use the below Fiori app and click on create Warehouse Task
Now once this is done we will have the WTs created which we can check in
the warehouse monitor, we will confirm the WTs to move the stock to the
PSA Area.

Once this is done, we need to consume the components. We can use


below Fiori app or RF Menu

this will create a WT for GI. You can see this in the below Screenshot. First,
the material was stagged and then material was consumed.
We can see in the PMR, GI is completed, and subsequently material docs
with 261 mvmt type are posted in the S4 system.

If we TECO the ProdOrder.


Prod Order status will change in PMR

After posting GR for the Finished goods and final settlement. The
Production order will be completed.

Feel free to connect with me on LinkedIn.

Written by Manish Gupta


In SAP Extended Warehouse Management (EWM), stock type
determination during Production Material Request (PMR) generation is
crucial for ensuring that the correct stock is picked and staged for
production. Here are some key points to consider:

1. Stock Determination Configuration: You can configure stock


determination in EWM by navigating to IMG → EWM → Cross-Process
Settings → Stock Determination. Here, you can assign stock
determination groups to the warehouse product master 1.

2. Warehouse Process Type: The warehouse process type (WPT)


plays a significant role in determining the stock removal
strategy. You can set up different WPTs based on the control cycle,
which helps in picking the correct stock type for production or repair
processes1.

3. Advanced Production Integration: For advanced production


integration, you can use the control cycle to determine the
warehouse process type. This allows for dynamic stock type
determination based on the production order type or specific
material numbers (MATNR)1.

4. PMR Item Types: You can define different PMR item types in EWM
and map them to different production order types. This mapping
helps in assigning different warehouse process types to the item
types, further refining the stock removal strategy1.

5. Stock Removal Sequence: During stock removal, EWM considers


the warehouse number stock characteristics such as Owner and
Stock Type. The stock removal sequence is based on the
prioritization of individual stocks according to the valuation you
have defined2.

These configurations help ensure that the correct stock type is picked and
staged for production, improving efficiency and accuracy in the warehouse
operations.

If you have any specific scenarios or further questions, feel free to ask!

You might also like