DEPARTMENT OF ELECTRICAL ENGINEERING

Course Book for

B. Tech. in Electrical & Electronics Engineering

For

Academic Year
2022- 2023 (Admitted Student)

Visvesvaraya National Institute of Technology,

Nagpur-440 010 (M.S.)

 Institute Vision Statement

To contribute effectively to the National and International endeavor of producing quality human resource
of world class standard by developing a sustainable technical education system to meet the changing
technological needs of the Country and the World incorporating relevant social concerns and to build an
environment to create and propagate innovative technologies for the economic development of the Nation.

Institute Mission Statement

The mission of VNIT is to achieve high standards of excellence in generating and propagating knowledge
in engineering and allied disciplines. VNIT is committed to providing an education that combines rigorous
academics with joy of discovery. The Institute encourages its community to engage in a dialogue with
society to be able to effectively contribute for the betterment of humankind.

Department Vision Statement

The Department of Electrical Engineering will provide programs of the highest quality to produce world
class engineers who can address challenges of the millennium. It commits itself to impart the skills,
knowledge and attitudes to create, interpret, apply and disseminate engineering to build better future for
humankind. This department will endeavor to strengthen the facilities to provide solutions to relevant
Electrical Engineering problems.

Department Mission Statement

The mission of the Electrical Engineering Department is:-
1. To create the environment that facilitates learning the fundamentals of Electrical Engineering.
2. To impart the knowledge in Electrical Circuits, Power Systems, Electrical Machines, Power
Electronics, Electrical Drives and Non-Conventional Energy Systems.
3. To provide premier education through dedicated teaching, innovation and research.
4. To cater to practical issues by adapting to technical, economical and social trends.
5. To prepare students to face challenges in the global environment.

1
 Brief about Electrical Engineering Department:

The main Objectives: of B.Tech. Program are

1. To develop specialised manpower for electrical power and energy industry.
2. To enhance analytical skills so as to enable to solve complex industrial problems.
3. To augment the student’s capacity by offering projects in emerging areas of Electrical &
Electronics Engineering.
4. To improve student’s perspective towards environmental issues by sensitizing and building the
awareness of green technologies.
5. To inculcate the culture of research oriented projects with state of art facility laboratories in
Electrical & Electronics Engineering.

2
 List of faculty Members

Sr. No. Faculty Name Areas of specialization

1 Suryawanshi H.M. Power Electronics, Electrical Drives

2 Aware M.V. Electrical Drives, Power Electronics, High Voltage

Engineering
3 Borghate V.B. Power Electronics, Electrical Machine Design

4 Chaudhari M.A. Power Quality, Power Electronics

5 Umre B.S. Power Systems, Electrical Machines

6 Ballal M.S. Condition Monitoring, Incipient Fault Detection, Power

Quality
7 Khedkar M.K. Renewable Energy Systems, Distribution Automation

8 Kulkarni P.S. Power Systems Operation & Control, Renewable Energy

Systems
9 Patne N.R. Power Systems, Power Quality

10 Ramteke M.R. Power Electronics

11 Bhat S.S. Power System Analysis

12 Kale V.S. Power System Protection, A.I Applications in Power Systems

13 Lokhande M. L. Power Electronics, Electric machine, Photovoltaics

14 Chaturvedi P. Power Electronics

15 Dhabale A. Control Systems, Electrical Drives

16 Keshri R. K. Power Electronics, Electric drives, Electric Vehicle

17 Satputaley R. J. Power Systems, Power Quality

18 Mitra A. Power Systems, Renewable Energy Systems

19 Rajpathak B. A. Control Systems

20 Suraparaju K. R. Control Systems

21 Ramsha K. Power Electronics, Electrical Drives, Renewable Energy

System
22 Singh J. P. Control Systems and Non-Linear Dynamics

23 Dr. Avinash tah Power Electronics Application to Power Systems

3
 24 Dr. Jawaharlal Power Systems, Renewable Energy Systems
Bhukya
25 Dr. Mohd Alam Power Electronics, Energy systems

26 Dr. Soumyabrata Power System, Renewable Energy Systems

Das
27 Dr. Narendra Power Electronics
Babu
28 Dr. Padmini Control System

UG/ PG Programmes Offered by Electrical Engineering Department:

The department offers following undergraduate and postgraduate programs

Program Intake
UG B.Tech in Electrical and Electronics Engg 115
PG M. Tech. in
1. 1. Integrated Power Systems (IPS) 25
2. 2. Power Electronics and Drives (PED) 25

Credit System at VNIT:

Education at the Institute is organized around the semester-based credit system of study. The prominent
features of the credit system are a process of continuous evaluation of a student’s performance / progress
and flexibility to allow a student to progress at an optimum pace suited to his/her ability or convenience,
subject to fulfilling minimum requirements for continuation. A student’s performance/progress is measured
by the number of credits he/she has earned, i.e. completed satisfactorily. Based on the course credits and
grades obtained by the student, grade point average is calculated. A minimum number of credits and a
minimum grade point average must be acquired by a student in order to qualify for the degree.

Course credits assignment

Each course, except a few special courses, has certain number of credits assigned to it depending on
lecture, tutorial and laboratory contact hours in a week.
For Lectures and Tutorials: One lecture hour per week per semester is assigned one credit and
For Practical/ Laboratory/ Studio: One hour per week per semester is assigned half credit.
Example: Course XXXXXX with (3-0-2) as (L-T-P) structure, i.e. 3 hr Lectures + 0 hr Tutorial + 2 hr
Practical per week, will have (3x1 + 0x1 + 2x0.5 =) 4 credits.

4
Grading System
The grading reflects a student’s own proficiency in the course. While relative standing of the student is
clearly indicated by his/her grades, the process of awarding grades is based on fitting performance of the
class to some statistical distribution. The course coordinator and associated faculty members for a course
formulate appropriate procedure to award grades. These grades are reflective of the student’s performance
vis-à-vis instructor’s expectation. If a student is declared pass in a subject, then he/she gets the credits
associated with that subject.

Depending on marks scored in a subject, a student is given a Grade. Each grade has got certain grade
points as follows:

Grade Grade points Description

AA 10 Outstanding
AB 9 Excellent
BB 8 Very good
BC 7 Good
CC 6 Average
CD 5 Below average
DD 4 Marginal (Pass Grade)
FF 0 Poor (Fail) /Unsatisfactory / Absence from end-sem exam
NP - Audit pass
NF - Audit fail
SS - Satisfactory performance in zero credit core course
ZZ - Unsatisfactory performance in zero credit core course
W - Insufficient attendance

Performance Evaluation

The performance of a student is evaluated in terms of two indices, viz, the Semester Grade Point Average
(SGPA) which is the Grade Point Average for a semester and Cumulative Grade Point Average (CGPA)
which is the Grade Point Average for all the completed semesters at any point in time. CGPA is rounded
up to second decimal.
The Earned Credits (ECR) are defined as the sum of course credits for courses in which students have been
awarded grades between AA to DD. Grades obtained in the audit courses are not counted for computation
of grade point average.
Earned Grade Points in a semester (EGP) = Σ (Course credits x Grade point) for courses in which AA- DD
grade has been obtained
SGPA = EGP / Σ (Course credits) for courses registered in a semester in which AA- FF grades are awarded

5
CGPA= EGP / Σ (Course credits) for courses passed in all completed semesters in which AA- DD grades
are awarded

Overall Credits Requirement for Award of Degree

Credit Requirement
B. Tech. (EEE)
(4-Year)
1 Basic Sciences (BS) BS 18
2 Engineering Arts & Sciences (ES) ES 20
3 Humanities HU/ HM* 05
4 Departmental core DC 82
Program Elective
1 Departmental Elective DE 33-45
2 Humanities & Management HM 0-6
3 Open Course OC 0-6
Total requirement :BS + ES + DC+ DE + HM + OC = 170
Minimum Cumulative Grade Point Average required 4.00
for the award of degree

Attendance Rules

1. All students must attend every class and 100% attendance is expected from the students. However,
in consideration of the constraints/ unavoidable circumstances, the attendance can be relaxed by
course coordinator only to the extent of not more than 25%. Every student must attend minimum of
75% of the classes actually held for that course.
2. A student with less than 75% attendance in a course during the semester, will be awarded W grade.
Such a student will not be eligible to appear for the end semester and re-examination of that course.
Even if such a student happens to appear for these examinations, then, answer books of such
students will not be evaluated.
3. A student with W grade is not eligible to appear for end semester examination, reexamination &
summer term.

Program Outcomes (Department Specific) for B. Tech in Electrical & Electronics Engineering
Engineering Graduates will be able to:

6
1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and
an engineering specialization to the solution of complex engineering problems.

2. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and
engineering sciences.

3. Design/development of solutions: Design solutions for complex engineering problems and design
system components or processes that meet the specified needs with appropriate consideration for the public
health and safety, and the cultural, societal, and environmental considerations.

4. Conduct investigations of complex problems: Use research-based knowledge and research methods
including design of experiments, analysis and interpretation of data, and synthesis of the information to
provide valid conclusions.

5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools including prediction and modeling to complex engineering activities with an
understanding of the limitations.

6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal,
health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional
engineering practice.

7. Environment and sustainability: Understand the impact of the professional engineering solutions in
societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development.

8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice.

9. Individual and team work: Function effectively as an individual, and as a member or leader in diverse
teams, and in multidisciplinary settings.

10. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports and
design documentation, make effective presentations, and give and receive clear instructions.

11. Project management and finance: Demonstrate knowledge and understanding of the engineering and
management principles and apply these to one’s own work, as a member and leader in a team, to manage
projects and in multidisciplinary environments.

7
12. Life-long learning: Recognize the need for, and have the preparation and ability to engage in
independent and life-long learning in the broadest context of technological change.

The Program Specific Objectives (PSO): of B.Tech. Program are

1. To develop specialized manpower for electrical power and energy industry.
2. To enhance analytical skills so as to enable to solve complex industrial problems.
3. To augment the student’s capacity by offering research oriented projects in emerging areas of
Electrical & Electronics Engineering.
4. To improve student’s perspective towards environmental issues by sensitizing and building the
awareness of green technologies.

8
 Curriculum of the courses of study
First Year (Semester I & II)
(Sections CSE(R), ECE(S), EEE(T), *MEC(U))

I Semester
S.N Course
Course Type L-T-P Credits
Code
1 AML152 /
Engineering Mechanics ES 3-1-0 4
*AML153
2 AMP152 /
Engineering Mechanics Laboratory ES 0-0-2 1
*AMP153
3 HUL101 Communication Skills HM 2-0-2 3
4 MAL101 Mathematics I BS 3-1-0 4
5 MEL102 Engineering Drawing ES 3-0-0 3
6 MEP102 Engineering Drawing Practical ES 0-0-2 1
7 PHL102 Physics BS 3-1-0 4
8 PHP102 Physics Laboratory BS 0-0-2 1
SAA101 Health Information and Sports Part I AU 0-0-2 0
Total
21
Credits

II Semester
S.N. Code Course Type L-T-P Credits
1 CHL103 /
Chemistry BS 3-1-0 4
* CHL102
2 CHP103 /
Chemistry Laboratory BS 0-0-2 1
*CHP102
3 CSL101 Computer Programming ES 3-0-2 4
4 EEL103 /
Electrical Engineering ES 3-1-0 4
*EEL102
5 EEP103 /
Electrical Engineering Laboratory ES 0-0-2 1
*EEP102
6 HUL102 Social Science HM 2-0-0 2
7 MAL102 Mathematics II BS 3-1-0 4
8 MEP102 Workshop ES 0-0-4 2
9 SAA102 Health Information and Sports Part II AU 0-0-2 0
Total
22
Credits

9
Scheme for higher B. Tech. / B. Arch. M. Tech. (all courses) / M.Sc. / Engineering (semester wise as
per master file :)
Semester III
S.N. Course Course Name Type Structure Credits
Code L-T-P
1 EEL201 Network Theory DC 3-1-0 4
2 EEL202 Signals and Systems DC 3-1-0 4
3 EEL204 Measurement and Instrumentation DC 3-0-0 3
4 EEL206 Elements of Electromagnetic DC 3-0-0 3
5 ECL206 Electronic Devices and Circuits(EDC) DC 3-0-0 3
6 MAL201 Integral Transforms and PDE DC 3-0-0 3
7 EEP201 Network Lab DC 0-0-2 1
8 EEP204 Measurement and Instrumentation Lab DC 0-0-2 1
9 ECP206 Electronic Devices and Circuits LAB DC 0-0-2 1
Core Credits = 23
DC = 23 Credits

Semester IV
S.N. Course Course Name Type Structure Credits
Code L-T-P
1 EEL203 Electrical Machines-I DC 3-1-0 4
2 ECL207 Digital Circuits DC 3-0-0 3
3 EEL225 Electrical Power Systems-I DC 3-1-0 4
4 ECL320 Linear Electronic Circuits DC 3-0-0 3
5 EEP203 Electrical Machines-I Lab DC 0-0-2 1
6 ECP320 Linear Electronic Circuits Lab DC 0-0-2 1
7 ECP207 Digital Circuits Lab DC 0-0-2 1
Core Credits = 17
Elective (Any Two)
8 EEL215 Electrical Power Utilization DE 3-0-0 3
9 EEL227 Power Station Practice DE 3-0-0 3
10 MAL205 Numerical Methods & Probability Theory DE 3-0-0 3
Open Course OC 3-0-0 3
11 Humanities & Management HM 3-0-0 3
Elective Lab (Any One)
12 EEP223 Programming Techniques and Simulation 0-0-2 1
DE
Lab
13 EEP230 Electrical Workshop lab DE 0-0-2 1

Elective Credits = 7
DC + DE = 24 Credits

10
 Semester V
Course Structure
S.N. Course Name Type Credits
Code L-T-P
1 EEL302 Electrical Machine-II# DC 3-0-0 3
2 EEL325 Electrical Power System-II# DC 3-1-0 4
3 EEL226 Power Electronics DC 3-1-0 4
4 EEL305 Control System-I DC 3-0-0 3
5 EEL307 Electrical Machine Design DC 3-0-0 3
6 EEP226 Power Electronics Lab DC 0-0-2 1
7 EEP302 Electrical Machine-II Lab DC 0-0-2 1
8 EEP305 Control System-I Lab 0-0-2 1
Core Credits = 20
Elective (Anyone)
9 EEL327 Electrical Power Distribution System DE 3-0-0 3
10 EEL328 Optimization Techniques DE 3-0-0 3
11 PHL202 Introduction to Material Science DE 3-0-0 3
12 Open Course OC 3-0-0 3
13 Humanities & Management HM 3-0-0 3
Elective Credits = 3
DC + DE = 23 Credits
# Prerequisite
EEL203 Electrical Machine-I for Electrical Machine-II
EEL225 Electrical Power System-I for Electrical Power System-II
Semester VI
S.N. Course Course Name Type Structure Credits
Code L-T-P
1 EEL329 Switchgear and Protection DC 3-0-0 3
2 EEL330 Microcontrollers DC 3-0-0 3
3 EEL326 Industrial Automation# DC 3-0-0 3
4 EEL402 High Voltage Engineering DC 3-0-0 3
5 EEP329 Switchgear and Protection Lab DC 0-0-2 1
6 EEP330 Microcontrollers Lab DC 0-0-2 1
7 EEP326 Industrial Automation Lab DC 0-0-2 1
8 EEP402 High Voltage Engineering Lab DC 0-0-2 1
Core Credits = 16
Elective (Any Two)
9 MEL424 Industrial Engineering & 3-0-0 3
DE
Management
10 EEL304 Electric Drives & Their Control DE 3-0-0 3
11 EEL418 Control Systems II DE 3-0-0 3
12 EEL427 Restructured Power systems DE 3-0-0 3
13 Open Course OC 3-0-0 3
14 Humanities & Management HM 3-0-0 3
Elective Credits = 06
DC + DE = 22 Credits
# Prerequisite
EEL204 Measurement and Instrumentation for Industrial Automation
EEL226 Power Electronics for Flexible AC Transmission Systems

11
 Semester VII
Course Structure
S.N. Course Name Type Credits
Code L-T-P
1 EED401 Project Phase-I DC 0-0-2 2
Core Credits = 2
Elective (Any Five)
4 EEL408 Advanced Power Electronics# DE 3-0-0 3
5 EEL409 HVDC transmission DE 3-0-0 3
6 EEL428 Introduction to Electric Vehicles DE 3-0-0 3
7 EEL421 Power Quality DE 3-0-0 3
8 EEL415 Nonlinear Dynamical Systems DE 3-0-0 3
9 EEL435 Special Electrical Machines DE 3-0-0 3
10 EEL436 Introdu DE 3-0-0 3
11 Open Course OC 3-0-0 3
12 Humanities & Management HM 3-0-0 3
Elective Credits = 15
DC + DE = 17 Credits
#prerequisite EEL226 Power Electronics for Advanced Power Electronics
Semester VIII
S.N. Course Course Name Type Structure Credits
Code L-T-P
1 EED402 Project Phase-II# DC 0-0-4 4
Core Credits = 4
Elective (Any three)
2 EEL416 Renewable Energy System DE 3-0-0 3
3 EEL426 Condition Monitoring of Electric 3-0-0 3
DE
Components
4 Digital Signal Processing and its
EEL412 DE 3-0-0 3
Applications
6 EEL431 Smart grid DE 3-0-0 3
EEL 419 Electric Vehicle Subsystem 3-0-0 3
DE
Modeling
EEL437 Internet of Things for Electrical 3-0-0 3
DE
Engineering
7 Open Course OC 3-0-0 3
8 Humanities & Management HM 3-0-0 3
Elective Lab (Any One)
9 EEP433 Computer Applications in 0-0-2 1
DE
Electrical Engineering Lab
10 EEP416 Renewable Energy System Lab DE 0-0-2 1
11 EEP420 Condition Monitoring of Electric 0-0-2 1
DE
Components Lab
Elective (Any One)
12 EEL433 Flexible AC Transmission 3-0-0 3
DE
Systems #
EEP433 Flexible AC Transmission 0-0-2 1
DE
Systems Lab
OR
EEL434 Computer Methods in Power 3-0-0 3
DE
System

12
 EEP434 Computer Methods in Power 0-0-2 1
DE
System LAB
Elective Credits = 14
DC + DE = 18 Credits
#prerequisite
EED401 Project Phase-I for Project Phase-II

13
 FIRST SEMESTER

EEL102: ELECTRICAL ENGINEERING (For other branches)

4 credits (3-1-0)
Course Objectives:
The objective of the course is
 To learn basic ideas and principles of Electrical and Electronics Engineering
 Understanding details of electrical machines and digital fundamentals.
Course Outcomes:
1. .Understand basics of electrical components.
2. Appreciate and analyze DC, AC and magnetic circuits using KVL and KCL.
3. Understand working principle of transformers
4. Be familiar with the working principals of electrical machines.
5. Be able to understand and utilize digital fundamentals.
Mapping with POs
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L - L L - - - H
CO2 H H H H - - - - L - - H
CO3 H M - - L - - - - - - M
CO4 H M L L M M - M L M L H
CO5 H M M M M M - - - - L M

Course Contents:
Electrical Circuits: - Circuit Elements Resistance, Inductance & Capacitance,
Kirchhoff's Laws, Voltage Source (Definition, Characteristics of Practical Source, and
Equivalent Current Source), and Star-Delta Transformation.
Magnetic Circuits: - Flux, MMF, Reluctance, Analogy with Electric Circuits. Simple
Calculations for Composite Magnetic Circuits.
AC Circuits :-Periodic Function, Average & R.M.S., Values, Steady State Behavior With Sinusoidal
Excitation, Phasor Representation, Reactance & Impedance, Series & Parallel Circuit,
Power Factor, Principle of Generation of Single Phase & Three Phase Voltages, Power in Balanced Three
Phase AC System.
Transformers:- Introduction, Basic Principles, Construction, Phasor Diagram for Transformer under No
Load Condition, Transformer on Load, Basic idea of Voltage Regulation and Efficiency.

14
Basic Idea of Electrical motors: -
1. DC Motors: Basic Idea of DC motor, Significance of back emf and need of starter, types of DC
motors.
2. Induction Motors: Three phase Induction motor: Revolving magnetic field, synchronous speed, rotor
speed, slip, it‘s applications Single phase Induction motor: Types and it’s applications. Introduction of
Induction motor as Drive.
3. Stepper Motors: speed control and it’s applications.
Measuring Instruments: Introduction to analogue and Digital meters.
Digital Fundamentals:- Introduction to Number Systems, Boolean algebra and Logic Gates

Text Books:
1. D. C. Kulshrehtha, "Basic Electrical Engineering", Tata Mcgraw Hill, 2012.
2. S.K. Bhattacharya , “Basic Electrical and Electronics Engineering”, Pearson Education, 2012
Reference Books:
1. Kothari D.P. and Nagrath I.J., “Theory And Problems of Basic Electrical Engineering,” Prentice Hall
2. Edward Hughes, “Electrical Technology”, Pearson Education , 2008
3. Basic Electrical Engineering A Web course of NPTEL by Day, Bhattacharya & Roy, Available:- www.
nptel.ac.in
4. Anand Kumar, “Fundamentals of Digital Circuits”, Second Edition, 2009, PHI
5. Malvino, Leach, “Digital Principles and Applications”, Sixth Edition, 2006, McGraw Hill.

15
EEP102: ELECTRICAL ENGINEERING LAB (For other branches)
1 Credits (0-0-2)

Course Outcomes:
Students are able to:
1 Understand basics of R , L , C circuit elements and voltage and current sources.
2. Appreciate and analyse DC , AC and magnetic circuits using KVL and KCL.
3. Be familiar with electronic devices and their applications.
4. Understand working principle of transformers.
5. Be familiar with electronic devices and utilize digital fundamentals.

Mapping with POs

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L - L L - - - H
CO2 H H H H - - - - L - - H
CO3 H M - - L - - - - - - M
CO4 H M L L M M - M L M L H

List of Experiments:

1. Study and verification of Kirchhoff’s Laws applied to direct current circuit.

2. Determination of B/H curve of a magnetic material
3. Study of AC series circuits.
4. Study of AC Parallel circuits.
5. To determine Voltage regulation and efficiency of a single phase transformer by direct loading.
6. Reversal of direction of rotation of a three phase induction motor.
7. To study balanced three phase circuit.
8. Speed control of a DC motor by varying :-
a. Field current with armature voltage kept constant
b. Armature voltage with field current kept constant.
9. Study of logic gates.
10. Study and verification of Boolean algebra expressions.
Reference Books:

1. D. P. Kothari, B. S. Umre, “Laboratory manual for Electrical Machines – Second Edition” IK

International Publishing House Pvt. Ltd., New Delhi.

16
EEL103: ELECTRICAL ENGINEERING (For circuit branches: EE-EC-CS)
4 credits (3-1-0)
Course Objectives:
The objective of the course is
1. To learn basic ideas and principles of Electrical and Electronics Engineering
2. Understanding details of electrical machines, electronic circuits and digital fundamentals.
Course Outcomes:
Students are able to
2. Understand basics of electrical components.
3. Appreciate and analyze DC, AC and magnetic circuits using KVL and KCL.
4. Understand working principle of electrical machines.
5. Be familiar with electronic devices and their applications.
6. Be able to understand and utilize digital fundamentals.

Mapping with POs

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L - L L - - - H
CO2 H H H H - - - - L - - H
CO3 H M - - L - - - - - - M
CO4 H M L L M M - M L M L H
CO5 H M M M M M - - - - L M

Course Contents:
Electrical Circuits:- Circuit Elements Resistance, Inductance & Capacitance,
Kirchhoff's Laws, Voltage Source (Definition, Characteristics of Practical Source, and Equivalent Current
Source), and Star-Delta Transformation.
Magnetic Circuits:- Flux, MMF, Reluctance, Analogy with Electric Circuits. Simple Calculations for
Composite Magnetic Circuits.
AC Circuits :- Principle of Generation of Single Phase , Periodic Function, Average & R.M.S., Values,
Steady State Behavior With Sinusoidal Excitation, Phasor Representation, Reactance & Impedance, Series
& Parallel Circuit, Power Factor
Transformers:- Introduction, Basic Principles, Construction, Phasor Diagram for Transformer under No
Load Condition, Transformer on Load, Basic idea of Voltage Regulation and Efficiency
Introduction and applications of - 1) DC Motors 2) Induction Motors 3) Stepper Motors.
Application of semiconductor diodes:- Rectifier, Clipping and clamping circuits, etc.

17
Fundamentals of Bipolar Junction Transistor:- Common emitter, common collector and common base
configurations of BJT, Emitter follower, various Biasing circuits for BJT, BJT as a switch, BJT as
amplifier. Basic introduction to OP-AMP.
Digital Fundamentals:-Number system (Binary, octal, hexadecimal, excess-3,etc), 2’s complement
representation, Boolean algebra, logic minimization using K maps, logic gates,
Decoders, encoders, multiplexers, de-multiplexers, adder, subtractor, code converters (BCD to 7 segment
and others)

Text Books|:
1. D. C. Kulshrehtha, "Basic Electrical Engineering", Tata Mcgraw Hill, 2012.
2. S.K. Bhattacharya , “Basic Electrical and Electronics Engineering”, Pearson Education, 2012.
3. Millman Halkias , “Electronic Devices and Circuits”, Tata McGraw Hill, 2000

Reference Books:
1. Kothari D.P. and Nagrath I.J., “Theory And Problems of Basic Electrical Engineering,” Prentice
Hall
2. Edward Hughes, “Electrical Technology”, Pearson Education , 2008
3. Basic Electrical Engineering A Web course of NPTEL by Day, Bhattacharya & Roy, Available:-
www. nptel.ac.in
4. Anand Kumar, “Fundamentals of Digital Circuits”, Second Edition, 2009, PHI
5. Malvino, Leach, “Digital Principles and Applications”, Sixth Edition, 2006, McGraw Hill.

18
EEP103: ELECTRICAL ENGINEERING LAB (For circuit branches: EE-EC-CS)
1 Credits (0-0-2)

Course Outcomes:
Students are able to
1. Understand basics of R , L , C circuit elements and voltage and current sources.
2. Appreciate and analyse DC , AC and magnetic circuits using KVL and KCL.
3. Be familiar with electronic devices and their applications.
4. Understand working principle of transformers.
5. Be familiar with electronic devices and utilize digital fundamentals.

Mapping with POs

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L - L L - - - H
CO2 H H H H - - - - L - - H
CO3 H M - - L - - - - - - M
CO4 H M L L M M - M L M L H

List of Experiments:
1. Study and verification of Kirchhoff’s Laws applied to direct current circuit.
2. Determination of B/H curve of a magnetic material
3. Study of AC series circuits.
4. Study of AC Parallel circuits.
5. Determine Voltage regulation and efficiency of a single phase transformer by direct loading.
6. Study of Half and Full wave rectifier
7. Study of BJT as amplifier.
8. Study of logic gates
9. Study and verification of Boolean Algebra expressions

10. Reversal of direction of rotation of a three phase induction motor.

11. Study of different mathematical operation using OP-AMP

Reference Books:
1. D. P. Kothari, B.S. Umre, “Laboratory manual for Electrical Machines – Second Edition”
IK International Publishing House Pvt. Ltd., New Delhi.

19
 THIRD SEMSESTER

EEL201: NETWORK THEORY

4 Credits (3-1-0)

Course Objectives:

 The subject deals with the various methods of analysis of electrical circuits under transient and
steady state conditions.
 It provides a solid foundation for later learning as well as for future professional activities.
Course Outcomes:
Students are able to
1. Understand basics electrical circuits with nodal and mesh analysis.
2. Appreciate electrical network theorems.
3. Apply Laplace Transform for steady state and transient analysis. Determine different network
functions.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H H L L - - - - L H
CO2 H H H H H - - - - L - H
CO3 H H H H H L - - - - - M

Course Contents:

Node and Mesh Analysis: Node and mesh equation, matrix approach of complicated network containing
voltage and current sources, and reactances, source transformation, Graph Theory and network equations
and duality.
Network theorem: Superposition, Reciprocity, Thevenin’s, Norton’s, Maximum Power Transfer,
Compensation and Tellegen’s theorem as applied to AC circuits.
Laplace transforms and properties: Partial fraction, singularity functions, waveform synthesis, analysis of
RC, RL, and RLC networks with and without initial conditions with Laplace transforms evaluation of
initial conditions.
Transient behavior, concept of complex frequency, Driving points and transfer functions poles and zeros of
admittance function, their properties, sinusoidal response from pole-zero locations.

20
Text Books:
1. Van Valkenburg, “Network Analysis”, Third Edition, 2009,Prentice Hall of India.
2. Sudhakar, A. Shyammohan, “Circuits and Network”, Third Edition, 2006, Tata McGraw-Hill.

Reference Books:
1. D. Roy Choudhury, “Networks and systems” New Age International Publishers, 2nd edition,
2013
2. Kelkar and Pandit, “Linear Network Theory”, Pratibha Publication.
3. Mahmood Nahvi, Joseph A Edminister, “Schaum's Outline of Electric Circuits”, 6th edition,
Tata McGraw-Hill, 6th edition, 2013

21
EEP201: NETWORK LAB
1 Credit (0-0-2)
Course Outcomes:
Students are able to
1. Understand basics electrical circuits with nodal and mesh analysis.
2. Appreciate electrical network theorems.
3. Determine different network functions
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H H L L - - - - L H
CO2 H H H H H - - - - L - H
CO3 H H H H H L - - - - - M

List of experiments:

1. Study of 3-phase, Star connected, Unbalanced circuit.

2. Verification of Maximum Power Transfer Theorem
3. Verification of Superposition Theorem.
4. Verification of Reciprocity Theorem.
5. Determination of Two port parameters of given network.
6. Study of 3-phase, Delta connected, Unbalanced circuit.
7. Verification of Thevenin’s and Norton’s Theorem.
8. Study of Series and Parallel Resonance.
Note: The experiments are to be conducted for AC networks.

22
EEL202: SIGNALS AND SYSTEMS
4 Credits (3-1-0)

Course Objectives:

 The subject deals with various methods of analysis for continuous time and discrete time systems in
time domain and frequency domain.
 Being a basic course, students need to master this subject well and associate its basic concepts in
order to become competent engineers.
Course Outcomes:
Students are able to
1. Know basics of signal space theory.
2. Understand convolution sum of two signals.
3. Appreciate the concepts of state space representation.
4. Apply different transform for discrete and continuous analysis.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M H L L L L L H - H
CO2 H H H H H L L L L M L H
CO3 H H H H H L L L L M - H
CO4 H M H M H L L L L L M H

Course Contents:

Elements of Signal Space Theory: Different Types of Signals, Linearity, Time Invariance and Causality,
Impulse Sequence, Impulse Functions and Other Singularity Functions.
Convolution: Convolution Sum, Convolution Integral and Their Evaluation, Time Domain Representation
and Analysis, of LTI Systems Based on Convolution and Differential Equations.
Multi Input-Output Discrete and Continuous Systems: State Model Representation, Solution of State,
Equations, State Transition Matrix.
Transform Domain Considerations: Laplace Transforms and Z-Transforms, Application of Transforms to
Discrete and Continuous Systems Analysis, Transfer Function, Block Diagram Representation, and DFT.
Fourier series and Fourier Transform: Sampling Theorem, Discrete Fourier Transform (DFT), Estimating
Fourier Transform Using (DFT).

23
Text Books:

1. Oppenheim A.V., Willsky A.S. and Young I.T., “Signals and Systems”, Second Edition, 1997,
Prentice Hall.

2. Simon Haykin and Barry Van Veen, “Signals and Systems”, Second Edition, Wiley International.

Reference Books:

1. R.F. Ziemer, W.H Tranter and J.D.R.Fannin, “Signals and Systems - Continuous and Discrete”,
Forth Edition Prentice Hall.

2. M. J. Roberts, “Signals and Systems”, 2003, Tata McGraw-Hill.

24
EEL204: MEASUREMENT AND INSTRUMENTATION
3 Credits (3-0-0)

Course objectives:

 Understand the necessity and importance of Measurement & Instrumentation.

 To know about various kinds of measurement techniques, instruments, sensor & transducers.
 To learn to apply proper method of measurement, sensors in instrumentation.

Course Outcomes:
Students are able to: -
1. Appreciate various aspects of the art and science of measurement and instrumentation.
2. Know about different measurement methods, sensors and transducers.
3. Apply proper method, sensors and transducers for specific applications and measurement.
4. Apply idea of digital techniques in signal processing and instrumentation etc.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M M H M H H M M M M
CO2 M H M M M M H L M M L M
CO3 H H H M M M M M M M M M
CO4 M M M M M M M L M M M M
Course Contents:

Measurements: Principle of moving coil, moving iron and dynamo meter type of instruments.
Measurement of low, high and medium resistances. Measurement of power and energy in single phase and
poly-phase circuits. Power factor meter, maximum demand indicator, tri-vector meter. AC bridges for
measurement of inductance and capacitance. AC/DC Potentiometers. Loading effect of instrument.
Measurement errors. Instrument transformers (CT, PT): General theory, errors and applications in
measurements.
Instrumentation: Sensors, transducers for displacement, pressure, temperature etc.; Hall Effect transducers,
piezoelectric transducers. ADC/DAC, Instrumentation amplifier, filters. Telemetry systems, Digital signal
processing, Microprocessor based basic power measurement and data acquisition systems. Oscilloscopes,
spectrum analyzer, virtual instrumentation.

25
Text Books:

1. Ernest O.Doebelin, “Measurement Systems Application and Design, International Student

Edition”, McGraw Hill Book Company, 1998.
2. Alan S. Morris, Reza Langari, “Measurement and Instrumentation: Theory and application”,
Academic Press, 2012.

Refernce Books:
1. A.K. Sawhney, “A course in Electrical & Electronics Measurement and Instrumentation”, Dhanpat
rai & Sons, 2015
2. C.S. Rangan, G.R. Sharma, V.A.V. Mani, “Instrumentation, Devices and Systems”, TMH, 2 nd
edition.
3. Alan S Morris,” Measurement and instrumentation principles”, Butterworth-Heinemann, 3rd
edition.

26
EEP204: MEASUREMENT AND INSTRUMENTATION LAB
1 Credit (0-0-2)

Course Outcomes:
Students are able to
1. Understand the characteristics of various transducers and applications
2. Understand the characteristics of various accuracy class of CTs and PTs
3. Understand the concept of industrial energy measurements system.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M L M M M M H H L H
CO2 H H L L M M L L H H L H
CO3 H H L L M M M M H H M H

List of experiments:

1. Measurement of three phase power by Two Wattmeter method procedure.

2. To study and plot the characteristics of LVDT.
3. Measurement of Medium resistance by Ammeter-Voltmeter method.
4. Study of Differential and Additive connection of current transformer.
5. Study the characteristics between strain applied to the cantilever strain sensor and the signal
conditioned sensor voltage.
6. Study the characteristics of the developing torque and the signal conditioned sensor output voltage.
7. Study the performance and characteristics of Hall Effect voltage sensor.
8. To analyse the characteristics of the Piezo electric sensor.
9. Measurement of energy using different CTs and PTs.
10. Determination of polarities and ratio of various CTs and PTs.

27
ECL206: ELECTRONIC DEVICES & CIRCUITS

3 Credits (3-0-0)

Course Objectives:

 To introduce students with the various concepts of electronic devices and circuits.
 To teach the theory of various types of diodes, transistors, amplifiers, oscillators etc.

Course Outcomes:
Students are able to
1. Understand basics electronic circuits.
2. Appreciate concepts of small signal analysis.
3. Comprehend the operation of different power amplifier.
4. Know high frequency analysis.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H H H L M L H - - H
CO2 H H H H H L M L H - L H
CO3 H H H H H L M L H - M H
CO4 H H H H H L H L H - - H

Course Contents:

Semiconductor Physics, P &N Type Semiconductors, Diodes and Power Supplies, Theory of P-N Junction
Diode, Junction Capacitance, Characteristics & Applications of Following Diodes, Zener, Schottkey,
Photodiode, LED, LCD, Varactor Diode &Tunnel Diode

Power Supplies, Half wave & Full wave, Rectifiers, Filters, Ripple-Factor, and Zener Emitter Follower
Type Regulators

Junction Transistors Theory of Operation, Static Characteristics , Break Down Voltages, Current
Voltage Power Limitations, Biasing of BJT Different Biasing Arrangements, Stability Factor,
Thermal Runaway, Power Transistors
Small Signal Analysis & High Frequency Analysis of BJT CE, CB, CC Amplifiers and Comparison High
Frequency Analysis Calculation of Frequency Response, Gain Bandwidth Product
Power Amplifiers Classification A, B, AB, C Classes, Efficiency, Push Pull Configuration, Complimentary
Symmetry, Second Harmonic & Cross Over Distortion. Positive and Negative Feedback Amplifiers

28
Classification, Practical Circuits, Applications, Advantages. Oscillators Stability, Bark hausen Criteria,
RC, LC &Crystal Oscillators
Field Effect Transistor &MOSFET, Principle of Operation & Characteristic, Biasing Arrangement, Small
Signal Analysis of CG, CD & CS, High Frequency Analysis

Text Books:

1. Milmanand Halkias, “Integrated Electronics”, Second Edition, 2011, McGraw Hill.

2. Bapat, “Theory & Problems in Circuit analysis”, McGraw Hill.

Reference Books:

1. Boylestad and Nashelsky, “Electronic Devices & Circuit theory”,2011, Tenth Edition, Dorling
Kindersley (RS).
2. Schilling & Belove, “Electronic Circuits – Discrete and Integrated”, Third Edition, McGraw Hill.
3. I.J. Nagrath, “Electronics – Analog and Digital”,First Edition, 2009, PHI.

29
ECP206: ELECTRONIC DEVICES & CIRCUITS LAB

1 Credit (0-0-2)

Course Outcomes:
Students will
1. know about fundamentals of devices using general purpose laboratory instruments.

2. verify the theoretical characteristics of devices.

3. be able to design small circuits based on the knowledge gained through experiments in the laboratory.

4. be able to design electronics circuits using devices for different applications.

5. be able to analyse various electronics circuits through simulation and actual circuit implementation.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 L L - - L - - M H - - L
CO2 M L - - M - - M H - - L
CO3 H H - - M - - - H - - -
CO4 H H H L M - - M H - L M
CO5 H H H M H - - L H - L L

List of Experiments:

1. To plot V-I Characteristics of diode and compare various parameters ( both in forward and reverse
bias)
2. To study Zener diode as a voltage regulator & plot its load regulation characteristics.
3. To study full wave rectifier with & without filters and compare the ripple factor theoretically and
practically.
4. To draw input/ output characteristics of common emitter configuration and compute the h-
parameters.
5. To study JFET characteristics and compute various parameters.
6. To study and plot the frequency response of single stage BJT amplifier.
7. To study RC phase shift oscillator using BJT.

30
MAL201: INTEGRAL TRANSFORMS AND PARTIAL DIFFERENTIAL EQUATIONS
3 Credits (3-0-0)

Course Objectives:

 To teach various mathematical transforms.

 Study of partial differential equations.

Course Outcomes:
Students are able to
1. Apply Laplace transform to solve differential equations.
2. Understand theory and application of Fourier transform.
3. Know basics of Z-Transform.
4. Solve partial differential equations.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H H H L M L H - M H
CO2 H H H H H L M L H - M H
CO3 H H H H H L M L H - M H
CO4 H H H H H L H L H - - H

Course Contents:

Laplace Transforms: Definition of Laplace Transforms, Linearity Property, Condition For Existence of
Laplace Transform, First and Second Shifting Properties, Transforms of Derivatives and Integrals,
Evaluation of Integrals by Laplace Transform. Inverse Laplace Transform, Convolution Theorem, Laplace
Transform of Periodic Functions, Unit Step Function and Dirac Delta Function. Applications of Laplace
Transform to Solve Ordinary Differential Equations

Fourier series and Fourier Transforms: Fourier series, Half Range Sine and Cosine Series Expansions,
Exponential Form of Fourier Series. Fourier Integral Theorem, Fourier Transform, Fourier Sine and
Cosine Transforms, Linearity, Scaling, Frequency Shifting and Time Shifting Properties, Convolution
Theorem
Z-Transform: Z – Transform, Properties of Z-Transforms, Convolution of Two Sequences, Inverse Z-
Transform, Solution of Difference Equations
Partial Differential Equations: Formation of First and Second Order Equations, Solution of First Order
Linear Equations: Lagrange’s Equation, Particular Solution Passing through a Given Curve. Higher Order

31
Equations with Constant Coefficients, Classification of Linear Second Order Poles, Method of Separation
of Variables, Solution of one Dimensional Wave Equation, Heat Equation, Laplace Equation (Cartesian
and Polar Forms), D’Alembert Solution of Wave Equation

Text Books:
1. Kreyszig, E.John,“Advanced Engineering Mathematics”, Eighth Edition,1999,Wiley & Sons.
2. R.K. Jainand S.R. K Iyengar, “Advanced Engineering Mathematics”, Third Edition, 2007,Narosa
Publishers.
Reference Books:
1. G.B. Thomas and R.L Finney, “Calculus and Analytic Geometry”, Addison Wesley Longman Inc.

32
EEL206: ELEMENTS OF ELECTROMAGNETICS

3 Credits (3-0-0)

Course Objectives:

 To learn the fundamental concepts applied in Electrostatics, Magneto statics, Time-varying fields
and Electromagnetic Waves.
 To apply the principles of Electromagnetic Field Theory for the design and analysis of Power
Transmission lines.
Course Outcomes:
Students are able to
1. Understand basics of electromagnetic circuits.
2. Grasp concepts of magneto statics.
3. Comprehend knowledge of time varying fields.
4. Appreciate basics of electromagnetic waves.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1
H H L M L L L - L L - H
CO2
H H L M L L L - L - L H
CO3
H H L M L L L - L H - H
CO4
H M L M L L L M L M L H

Course Contents:

Vector Algebra, Cartesian, Cylindrical and Spherical Co-ordinate System. Transformation of Variables
from Cartesian to Cylindrical and Spherical Coordinate System and Vice-Versa
Coulomb’s Law, Electric Field Intensity, Field of ‘N’ Point Charges, Field of Line and Sheet of Charge,
Electric Flux Density, Gauss’s Law and Its Applications, Divergence and Divergence Theorem
Definition of Potential Difference and Potential, Potential of Point Charge and System of Charges Potential
Gradient, Energy Density in Electrostatic Field. Poisson’s and Laplace’s Equations, Current and Current
Density, Continuity of Current Capacitance, Dielectrics.

33
Biot-Savart, Amperes Circuital Laws and their Applications, Curl, Stoke’s Theorem, Magnetic Flux
Density, Scalar and Vector Magnetic Potential, Maxwell’s Equations in Steady Electric and Magnetic
Fields
Force on Moving Charge and Differential Current Element, Force and Torque on a Closed Circuit. Time
Varying Fields and Maxwell’s Equations,.
Transmission Lines
Uniform Plane Waves, Wave Motion in Free Space, Perfect Dielectric, Lossy Dielectric and Good
Conductor, Skin Effect, Poynting Vector and Power Considerations. Reflection of Uniform Plane Waves,
Standing Ratio

Text Books:

1. Hayt W.H., “Engineering Electromagnetics”, 2013, Eighth Edition, Tata Mc-GrawHill.

2. Mathew, N.O. Sadiku, “Elements of Electromagnetics”, Fourth Edition, Oxford University Press.

Reference Books:
1.D. N. Narayan Rao, “Elements of Engineering Electromagnetics”, Sixth Edition,2006, Pearson
Education.

34
 FOURTH SEMESTER
EEL203: ELECTRICAL MACHINES-I

3 Credits (3-0-0)

Course Objectives:

 To learn the basic operation and control of DC machines.

 To learn transformer operation w.r.to. harmonics and connections.
 To study the Induction motor
Course Outcomes:
Students are able to

1. Appreciate and understand DC machines

2. Comprehend the operation and performance of three-phase transformer
3. Appreciate the operational principle of three-phase induction motor.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H M M - - - L L - H
CO2 H H H M M - - - L L M H
CO3 H H H H H - - - L M M H

Course Contents:

Winding: Types of Windings of DC and AC Machine, MMF of winding and induced EMF.

D.C. Motor: Basic Principle and Operation, Classification, Armature Reaction and Commutation, Inter-
pole and Compensating winding, Torque, Characteristics, Starting, Speed Control, Braking, Permanent
Magnet Machines, Losses, Efficiency, Testing, Applications.

Three Phase Transformer: Connection and Phasor Groups, Effect of Polarity Marking and Phase Sequence,
Parallel Operation, Excitation Phenomenon and harmonics, Tertiary Winding, Unbalanced Operation,
Single Phasing, Open Delta Connection, Testing of Transformer Bank for Proper Connection, Scott
Connection, Tap Changing Transformer, Cooling of Transformer, Applications.

Three Phase Induction Motor: Principle and Operation, Classification, Torque Speed Characteristics.

35
Single Phase Induction Motor: Principle and Operation, Types, Equivalent Circuit, Characteristics,
Applications.

Text Books:

1. E Fitzgerald, Charles Kingsley, Jr. Stephen D. Umans, “Electric Machinery”, Tata McGraw-Hill,
Fifth Edition. 6th edition, 2005

2. I. J. Nagrath, , D. P.Kothari, “Electric Machines”, Third Edition,Tata McGraw-Hill Publishing

Company Ltd.
Reference Books:
1. P. S. Bhimbra, “Electrical Machinery”, Seventh Edition, 1995,Khanna Publishers.
2. P.S.Bhimbra, “Generalized Theory in Electrical Machines”, Khanna Publishers.
3. P. K. Mukharjee, S. Chakravarti, “Electric Machines”, DhanpatRai& Sons.2nd edition, 2011

36
EEP203: ELECTRICAL MACHINES-I LAB

1 Credit (0-0-2)

Course Outcomes:
Students are able to:
1. Know the operation of DC machines
2. Know the operation of Transformers and 1-Phase Transformers.
3. Know the operation of Induction motors.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H M M - - - L L - H
CO2 H H H M M - - - L L M H
CO3 H H H H H - - - L M M H

List of experiments:

1. To study the various configurations of three-phase transformer

2. To study the speed control of DC Shunt Motor by a) varying armature voltage with field current
kept constant, b) varying field current with armature voltage kept constant.
3. To perform Load Test on DC Shunt Generator.
4. To perform O. C. and S. C. Test on a Single Phase Transformer
5. To study the a) Polarity Markings on Single Phase Transformer Windings and to study b)
Autotransformer.
6. To study the Load Test on a D C Cumulatively Compounded Motor.
7. To study the Load Test on a 3-Phase Induction Motor.
8. To determine Voltage Regulation and Efficiency of a Single Phase Transformer by Direct Loading.
9. To Study Scott-Connection of Transformers (Three Phase to Two Phase Conversion).

Reference Book:

1. D. P. Kothari,B. S. Umre, “Laboratory Manual for Electrical Machines”, IK International New

Delhi.

37
ECL207: DIGITAL CIRCUITS

3 Credits (3-0-0)

Course Objectives:

 Study of various number systems and logic gates.

 Study of flip-flops, counters, encoders, decoders, multiplexers etc.
Course Outcomes:
Students are able to
1. Know the conversion of number system.
2. Understand the concept of combinational circuits.
3. Comprehend the basic of sequential circuits.
4. Design counters.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H H H L M L H - - H
CO2 H H H H H L M L H - L H
CO3 H H H H H L M L H - L H
CO4 H H H H H L H L H - M H

Course Contents:

Analog Vs. Digital Systems, Transistor as a Switch, Boolean Identities, Logic Problems, Binary, Gray,
Octal, Hex and ASCII Codes, Gates And Their Truth Tables, De Morgans Law, Sum of Products And
Product of Sums.

Combinational Basic Concepts, SSI, MSI, VLSI Circuit Classification, Standard TTL, CMOS
Characteristics, Decoders, Encoders, Multiplexers, Code Converters Characteristics of Display Devices,
Standard Configuration of Gates As SSI/MSI/LSI Circuits, Arithmetic Circuits-Adders, Sub tractors (Half
And Full) BCD Adder/Subtractor, Concept of ALU.

Karnaugh Map, Simplification of Sum of Products and Product of Sums, Solution to Problems Using
MUX as A Function Generator, Simplification of Logical Functions Using Quine-Mclausky Method.

Introduction To Flip-Flop, Latches, Concept of Clock, Memoir Organization With Flip-Flop as Basic Cell,
RAM, ROM, EPROM, EEPROM, An Overview, Master Slave Combination and Conversion of One Type
To Another Type Flip-Flops, Multi-Vibrators and Their Design Parameters.

38
Execution Tables and Introduction to Sequential Circuits, Counters, Synchronous / Asynchronous,
Different Module Counters with Reset/Clear Facility, Design of Counters of Arbitrary Module with K-
Maps, Lock Free Counters

Introduction to Sequential System, Design of Sequential System Using Moore and Miley System,
Fundamental Mode Sequential Circuits.

Text Books:
1. H.Taub,“Digital Integrated Electronics”, First Edition,2008, McGraw Hill.
2. Anand Kumar, “Fundamentals of Digital Circuits”, Second Edition,2009, PHI.
Reference Books:
1. R.P.Jain, “Digital Logic Design”, First Edition, 2003, PHI.
2. Malvino, Leach, “Digital Principles and Applications”, Sixth Edition, 2006, McGraw Hill.

39
ECP207: DIGITAL CIRCUITS LAB

1 Credit (0-0-2)

Course Outcomes :

Students will

1. Understand analog and digital signals and processing of them.

2. Know building blocks used in digital circuit designing.

3. Understand the implementation of combinational and sequential circuits using the minimization

techniques (K-maps, Quine–McCluskey algorithm)

4. Be aware of applications of the combinational circuits and sequential circuits in the real world
scenarios by implementing different circuits.

5. Know debugging and rectifying the design problems associated for minimizing the design error
probability.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H L - - - - - - L - - L
CO2 H M - - - - - - M - - L
CO3 H H M L L - - - H - - L
CO4 H H H M M - - - H - - L
CO5 H H H H H - - L H - L M

List of experiments:

1. Study of logic gates.

2. Implementation of basic gates using universal gates.
3. Implementation of formula F=∑(0,1,4,5,6,8,9,12,13,14) using NAND gate only.
4. To study the half adder and full adder.
5. To study the MUX and DEMUX.
6. To study the encoder and decoder.
7. To study of JK, D, T flip flops.
8. Study of counters.
9. Study of shift registers.

40
EEL225: ELECTRICAL POWER SYSTEMS-I
3 Credits (3-0-0)

Course Objectives:
 Modelling of transmission lines
 Appreciate use of PU quantities in power system analysis
 Obtain Steady state solution of power system using G-S Load Flow
 Study Effect of P/Q on V/F

Course Outcomes: -

Students should be able to:

1. Calculate receiving end voltage of a given transmission line
2. Calculate currents and voltages in various parts of power system using PU concept
3. To find voltage at all buses and power flow through all lines given the loads and generation

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H H H H - - M - H H
CO2 H H H H H H M - H M H M

CO3 H H H M H H M - H M H M

Course Contents:
General Structure of Electrical Power System- Introduction to Power System, Generation, Transmission,
Distribution and Utilization- Overview Single Line Diagram (SLD) Representation
Transmission Substations- Different Types of Transmission Substations, Idea About Substation and
Equipment’s in Substation, Radial and Grid Systems, Concept of Instantaneous, Real, Reactive and
Complex Power, Three Phase Power and Power Loss.
Transmission Lines- Types of Transmission Lines, Basic Concept of Inductance and Capacitance of
Transmission Lines, Modes of Short, Medium, Long Transmission Lines, A, B, C, D Parameters,
Transmission Line Voltage Control Methods
Per Unit System- Necessity, Advantages, Applications in Power Systems and Calculations
Load Flow Analysis- Y Bus Formation, Gauss Iterative and Gauss Seidal Method, Method for Solution of
Load Flow Problem (Not More Than 3 Buses) MATLAB Program
Control Model- Load Frequency Control, Model of Turbine Speed Governing System, Load Sharing By
Generators, Concept Of Control Area, Two Area Load Frequency Control, Model of Automatic Voltage
Regulator (AVR), Voltage Behind Reactance Model of Generator and Power Angle Characteristics.

41
Text Books:
1. W.D. Stevenson Jr., Elements of power system analysis, McGraw-Hill publications, 3rd Edition
2. I.J. Nagrath, D. P. Kothari, Power System Engineering, Tata McGraw-Hill publications,2008

Reference Books:
1. Prabha Kundur, Power System Analysis and Control, TMH, 2008
2. O. I. Elgerd, Electric Energy Systems Theory, McGraw-Hill publications 1971
3. John J Grainger, W.D. Stevenson, Power System Analysis, McGraw-Hill (India) Pub. , 2003
4. Hadi Saadat, Power System Analysis , TMH , 2002

42
ECL320: LINEAR ELECTRONIC CIRCUITS
3 Credits (3-0-0)
Course Objectives:
 Study of operational amplifiers.
 Understanding working of linear circuits and linear ICs.
Course Outcomes:
Students are able to
1. Understand the basics of operational amplifier.
2. Design linear integrated circuits.
3. Grasp elementary idea of filter design.
4. Know use of different ICs for signal conditioning.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H H H L M L H - - H
CO2 H H H H H L M L H - L H
CO3 H H H H H L M L H - - H
CO4 H H H H H L H L H - L H

Course Contents:
Basic Operational Amplifier Circuits: Differential Amplifier Stages, Current Source, Biasing, Level
Shifting Techniques, Common Mode and Difference Mode Gains and Impedance of a Differential Stage.
Overload Protection Circuits, Frequency Response and Compensation, Characteristics of Ideal and Non-
Ideal Operational Amplifier, Error Measurement of Various Parameters

Simple Linear Circuits: Inverting, Non-Inverting Buffer Amplifiers, Summer, Integrator, Differentiator,
Log, Antilog, Multipliers, Divider Circuits, Differential Amplifier Configuration, Bridge Amplifiers,
Instrumentation Amplifier, Grounding And Shielding Problem in Instrumentation Amplifier
Precision Rectifier, RMS To DC Conversion, Constant Current And Voltage Sources, Sinusoidal
Oscillators With Frequency And Amplitude Stabilization, Elementary Idea Of Active Filter With
Butterworth 2nd Order Filter Design Procedure
Applications of Operational Amplifier for Clipping Clamping, Comparator Circuits With Nonlinear
Components, Multiplexers, De-multiplexers, Astable Mono stable, Bistable Multi-vibrator Circuits Using
OA Sample/ Hold Circuits D/A and A/D Conversion Circuits Phase Locked Loops.
Study of Linear ICS like:LM741, LM555, LM565 andLM723

43
Text Books:

1. R. Gayakwad ,“Op-Amps and Linear Integrated Circuits”, Pearson Education; 4th edition, 2015
2. R. Coughlin, F. Driscoll, “Operational Amplifiers and Linear Integrated Circuits”, Pearson; 5th
edition, 1997

Reference Books:

1. Tobey, Grames and Huelsman, Operational Amplifiers: Design and Applications, McGraw-Hill
Book Company; 1st edition, 1971.

44
ECP320: LINEAR ELECTRONIC CIRCUITS LAB
1 Credit (0-0-2)
Course Outcomes
Students will
1. Know basic laboratory instruments, device and its handling.
2. Analyze fundamental concepts learned in theory by using general purpose laboratory instruments.
3. Be able to design and develop Analog Circuits for different applications.
4. Be able to analyze various analog circuits through simulation and actual circuit implementation.
5. Be able to analyze theoretical, analytical and simulated results for various circuits so that project
can be built on this.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 L L - - L - - M H - - L
CO2 M L - - M - - M H - - L
CO3 H H - - M - - - H - - -
CO4 H H H L M - - M H - L M
CO5 H H H M H - - L H - L L

List of experiments:
1. OP-amp as inverting amplifier.
2. OP-amp as non-inverting amplifier.
3. OP-amp as integrator.
4. OP-amp as differentiator.
5. OP-amp as low pass filter.
6. OP-amp as High pass filter.
7. OP-amp as Schmitt trigger.
8. OP-amp as Comparator.
9. OP-amp as Half wave rectifier.
10. OP-amp as Full wave rectifier.
11. 555 As an Astable multi vibrator.
12. 555 As Mono stable multi vibrator.

45
 EEL215: ELECTRICAL POWER UTILIZATION

3 Credits (3-0-0)

Course Objectives:

 To enable the students to understand the concepts of electrical heating, welding, illumination,
traction and their uses in industry.

Course Outcomes:
Students are able to
1. Understand the working of traction system.
2. Know the properties of different electric heating system.
3. Grasp the detail idea of effective power utilization.
4. Comprehend basic domestic electric wiring.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M M M L L - M L H L
CO2 H M M M M L L - M L H L
CO3 H H H H H M L - M L H L
CO4 H H H H M L L - M L H L

Course Contents:
Electrical Traction : Features of an Ideal Traction System, Systems of Electrical Traction, Mechanism of
Train Movement, Speed- Time Curve, Traction Supply System, Transmission Line to Substation, Feeding
and Distribution System on an AC Traction, System of Current Collection, Traction Motors, Tractive
Effort and Horse Power, Speed Control Schemes, Electric Braking
Electric Heating: Classification, Heating Element, Losses in Oven and Efficiency, Resistance Furnace,
Radiant Heating, Induction Heating, High Frequency Eddy Current Heating, Dielectric Heating, Arc
Furnace, Heating of Furnace, Electric Welding, Methods and Equipments, Electrolysis and Electroplating
Applications
Illumination: Radiant Energy, Terms and Definitions, Laws of Illumination, Polar Curves, Photometry,
MSCP, Integrating Sphere, Luminous Efficacy, Electrical Lamps, Design of Interior and Exterior Lighting
Systems, Illumination Levels for Various Purposes, Light Fittings, Factory Lighting, Flood Lighting, Street
Lighting, Energy Conservation in Lighting
Air Conditioning and Refrigeration: Control of Temperature, Protection of Motors, Simple Heat-Load and
Motor Calculations, Air Conditioning, Functioning of Complete Air Conditioning System, Type of

46
Compressor Motor, Cool Storage, Estimation of Tonnage Capacity and Motor Power, Technology of
Electric and Hybrid Electric Vehicles
Basics of Domestic Electrical Wiring, Types of Cables, Flexible Wires Sizes and Current Capacity, Use of
Fuse, MCB and MCCB (Working and Construction), Basics of Air Flow for No Fans in a Room.

Text Books:
1. Taylor E. Openshaw, “Utilization of Electrical Energy”, 1968, Orient Longman.
2. Gupta J. B., “Utilization of Electric Power and Electric Traction”, 2002,S. K. Kataria and Sons

Reference Books:
1. Garg and Girdhar, “Utilisation of Electric Energy” 1982, Khanna Publisher.
2. S.C.Tripathy, “Electric Energy Utilization and Conservation”,1993, Tata McGraw Hill.
3. Wadhwa C.L., “Generation, Distribution and Utilization of Electrical Energy”,1993, Wiley Eastern
Limited,
4. Pratab H., “Art and Science of Utilization of Electrical Energy”, Second Edition, Dhanpat Rai and
Sons, New Delhi.
5. Web Resources: - Bee-india.org. , eia.doe.gov. , www.irfca.org. , IEEE bronze book- IEEE Press.

47
EEL227: POWER STATION PRACTICE
3 Credits (3-0-0)

Course Objectives:

 To learn the details of operations of various power plants.

Course Outcomes:
Students are able to
1. Know working of conventional sources of electrical energy.
2. Understand behavior of different generating stations.
3. Comprehend operations of different conventional power stations.
4. Appreciate detail study of power station control problem.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H M L H M - H M L H
CO2 H H H M L M M - H M M M
CO3 M H M M L M M - H L M H
CO4 H M M M L L L - M L M H

Course Contents:

Conventional Sources of Electrical Energy - Steam, Hydro, Nuclear, Diesel and Gas; Their Scope and
Potentialities for Energy Conversion

Generation – Different Factors Connected With a Generating Station; Load Curve, Load Duration Curve,
Energy Load Curve; Base Load and Peak Load Plants.
Thermal Stations – Selection of Site, Size and Number of Units, General Layout, Major Parts, Auxiliaries,
Generation Costs Of Steam Stations.
Hydro Stations – Selection of Site, Mass Curve, Flow Duration Curve, Hydrograph, Classification of
Hydro Plants, Types of Hydro Turbines, Pumped Storage Plants.
Nuclear Stations – Main Parts, Location, Principle of Nuclear Energy, Types of Nuclear Reactors, Reactor
Control, Nuclear Waste Disposal.
Power Station Control and Interconnection – Excitation Systems, Excitation Control, Automatic Voltage
Regulator Action; Advantage of Interconnection
Alternate Energy Sources Overview

48
Text Books:
1. M.V. Deshpande, “Elements of Electrical Power Station Design”, 2010, PHI.
2. B.R. Gupta, “Generation of Electrical Energy”, 2003, Eurasia Publishing house.

Reference Books:
1. Arora and Domkundwar, “A Course in Power Plant Engineering”, 1988, Dhanpat Rai and Sons.
2. M.M. El-Wakil, “Power Plant Technology”, 1985, McGraw- Hill.

49
MAL205: NUMERICAL METHODS &PROBABILITY THEORY
3 Credits (3-0-0)

Course Objectives:

 Study of various numerical methods.

 Study of probability theory.
Course Outcomes:
Students are able to
1. Solve problems based on all types of numerical methods.
2. Study and applications of probability theory.
3. Understand basics of probability distribution function.
4. Know stochastic processes.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H H H L M L H - M H

CO2 H H H H H L M L H - M H
CO3 H H H H H L M L H - M H
CO4 H H H H H L H L H - M H

Course Contents:

Numerical Analysis:
Solutions of Algebraic and Transcendental Equations by Iteration Method, Method of False Position,
Newton-Raphson Method and Their Convergence, Solutions of System of Linear Equations by Gauss
Elimination Method, Gauss Seidal Method, LU Decomposition Method Newton-Raphson Method for
System of Nonlinear Equations, Eigen Values and Eigen Vectors: Power and Jacobi Methods.

Numerical Solution of Ordinary Differential Equations:

Taylor’s Series Method, Euler’s Modified Method, Runge-Kutta Method, Adam’s Bash forth and Adam’s
Moulton, Milne’s Predictor Corrector Method. Boundary Value Problems: Shooting Method, Finite
Difference Methods.

50
Probability Theory:
Random Variables, Discrete and Continuous Random Variable, Probability Density Function; Probability
Distribution Function for Discrete and Continuous Random Variable Joint Distributions

Definition of Mathematical Expectation, Functions of Random Variables, The Variance and Standard
Deviations, Moment Generating Function other Measures of Central Tendency and Dispersion, Skewness
and Kurtosis.

Binomial, Geometric Distribution, Poisson distribution, and Relation between Binomial and Poisson’s
Distribution, Normal Distribution, Relation between Binomial and Normal Distribution. Introduction to
Stochastic Processes.

Text Books:

1. S. D. Cante and, C.de Boor, “Elementary Numerical Analysis-an algorithmic approach”, Third
Edition, 1981,McGraw-Hill.
2. Gerald and Wheatley Addison, “Applied Numerical Analysis”, Seventh Edition,2003,Wesley.

Reference Books:

1. K.S. Trivedi, “Probability Statistics with Reliability, Queuing and Computer Science applications”,
Second Edition,2012 Prentice Hall of India.
2. M.R. Spiegel, “Theory and problems of Probability and statistics”, Second Edition,2008, McGraw
Hill Book Company.

51
EEP223: PROGRAMMING TECHNIQUES & SIMULATION LAB
1 Credit (0-0-2)
Course Outcomes:
Students are able to:
1. To understand the basics of MATLAB and SCILAB
2. To understand the visualization and file I/O functions
3. To design the graphical user interface for programs
4. To simulate the electrical circuits.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H M M L M L L L M M L H

CO2 H M M L M L L L M M M H

CO3 H H H M H M L L H M M H
CO4 H H H H H M M L H M H H

List of Experiments:
1. Write programs to study basic matrix operations, decision making constructs and looping
constructs, functions of MATLAB and SCILAB.
2. To plot signal waveforms in purely inductive, purely resistive and capacitive circuits.
3. Write a program to plot frequency response of LP/HP filters.
4. Write a program to plot the transient response of the given RC and RL circuits using analytical
solution and also using ODE solver.
5. Write a program to plot the transient response of the given RC and RL circuits using function in
symbolic math tool box.
6. Write a program to compute standard deviation and RMS values of the signal using full cycle file
I/O.
7. Write a program to extract the fundamental component of a signal using full cycle window DFT.
8. Write a program to demonstrate the aliasing phenomenon in digital signal processing
9. Design the GUI for impedance calculator for series/parallel RLC circuit.
10. Create a model in Simulink to simulate a) RLC series circuit b) instantaneous over current relay.

52
Text Books:

1. Rudra Pratap, “Getting Started with MATLAB 7”, Oxford University Press (Indian Edition) 2006.

2. O. Beucher and M. Weeks, “Introduction to MATLAB and Simulink: A Project Approach”,

Second Edition, 2007, Jones & Bartlett Publishers

53
EEP230: ELECTRICAL WORKSHOP LAB
1 Credit (0-0-2)
Course Outcomes:

Students are able to:

1. To develop knowledge of basic electrical symbols

2. To develop skill of designing and developing hardware circuit
3. Develop basic knowledge of wiring.
4. To understand basic operation of industry
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M M M L L L L L M L M
CO2 H H H H L L L L H M H H
CO3
H H H M M L L L M L M M

CO4 H H H L M M M M H L M M

List of Experiments:
1 To study different Electrical Symbols.
2 To design single phase 50 Hz 230/12 V, 50 VA transformer.
3 To study the characteristics of linear and non-linear load
4 To design 12 V DC regulated power supply.
5 To design staircase wiring
6 To develop software based mini project
7 To develop hardware based mini project
8 Industrial Visit

54
 FIFTH SEMESTER
EEL302: ELECTRICAL MACHINES-II
3 Credits (3-0-0)
Pre-requisites: - EEL203

Course Objectives:

 This subject imparts knowledge on construction, operation and applications of synchronous and
induction motors.

Course Outcomes:
Students are able to
1. Handle the induction machines for various purposes.
2. Look after and interpret the behavior of three phase synchronous machine under different
conditions.
3. Appreciate working of special electrical machines
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M M L H M L L H L H
CO2 H H M H L H H L L H H H
CO3 H H L H H L L L L H L H
CO4 H L L L L M M L L M H H
Course Contents:

Three Phase Induction Motor: Torque Slip Characteristics, Determination of Equivalent Circuit
Parameters, Losses and Efficiency, Circle Diagram, Starting, Speed Control and Breaking, High Torque
Motors (Double Cage Motor), Crawling and Cogging, Applications, Induction Generator.

Three Phase Synchronous Generator: Introductions, Constructional Features of Cylindrical and Salient
Pole Rotor Machines, Steady State Operation of Three Phase Synchronous Generators: Phasor Diagram,
Regulation. Steady State Performance of Three Phase Synchronous Generator

Synchronizing of Generator with another Generator: Parallel Operation, Reactances (Parameters)and

their Measurement (Experimental Determination), Short Circuit Ratio, Losses and Efficiency
Synchronous Machines on Infinite Bus: Phasor Diagram, Expression for Torque, Load/Torque Angle,
Synchronous Motor Operation, Effects of Variable Excitation and Power Input on Generator Operation and
Effect of Variable Excitation and Load on Motor Operation.

55
Transient Behavior: Sudden 3-Phase Short Circuit, Time Constants and Equivalent Circuit Diagrams,
Damper Windings.

Introduction to Special Machines: Repulsion Motors, AC Series Motors, Universal Motors, Reluctance
Motor, Hysteresis Motor, Schrage Motor, Power Selsyns, Position Selsyns, BLDC motor (Only
Elementary Aspects of The above Types Are Expected).

Text Books:

1. P.S. Bhimbra, “Electrical Machinery”, Seventh Edition,1995,Khanna Publishers.

2. I.J. Nagrath, D. P. Kothari, , “Electric Machines”, 5th Edition, Tata McGraw-Hill Publishing
Company Ltd., 2017

Reference Book:

1. E Fitzgerald, Charles Kingsley, Jr. Stephen D. Umans, “Electric Machinery”, Tata McGraw-Hill,
Fifth Edition. 6th edition, 2005

2. P. K. Mukharjee, S. Chakravarti, “Electric Machines”, DhanpatRai& Sons.2nd edition, 2011

3. P.S. Bhimbra, “Generalized Theory in Electrical Machines”, Khanna Publishers

56
EEP302: ELECTRICAL MACHINES-II LAB
1 Credit (0-0-2)
Course Outcomes:
Students are able to:
1. Know the operation of commutator action
2. Understand the operation of synchronous motor and generator.
3. Solve the problems of synchronous generator related to regulation.
4. Analyze the operation of induction motor and generator.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L L L L H H L L
CO2 H H L H H H H L H H H H
CO3 H H M L L L L L H H L L
CO4 H H M H H H H L H H H H
List of experiments:

1. To Study the Variation of Speed and Load Test on Schrage Motor.

2. To Plot V and Inverted V (Λ) Curves of a Synchronous Motor.
3. To determine the ratio Xq/Xd for Three Phase Alternator by using “Slip Test”
4. To Study the Synchronization of an Alternator with an Infinite Bus by “Dark Lamp Method”
5. To determine Potier Reactance of Three Phase Alternator by “Zero Power Factor Saturation
Curve”.
6. To determine Negative Sequence and Zero sequence Reactances of Synchronous Generator.
7. To Study the Characteristics of Three Phase Induction Generator.
8. To Determine Direct Axis Sub transient (Xd”), Quadrature Axis Sub transient (Xq”) Synchronous
reactance of Synchronous Machine.

Reference Book:

1. D. P. Kothari, B. S. Umre, “Laboratory Manual for Electrical Machines”, IK International New

Delhi.

57
EEL325: ELECTRICAL POWER SYSTEM-II
4 Credits (3-1-0)
Pre-requisites: - EEL225

Course Objectives:
 Appreciation of power system concepts like analysis of symmetrical and unsymmetrical faults.
Using symmetrical components as a tool for unsymmetrical fault analysis
 Study of stability and economic operation of power system.

Course Outcomes:
Students are able to

1. Apply symmetrical components concepts in fault analysis.

2. Analyse different faults in power system.
3. Appreciate concepts of transient stability.
4. Understand economic operation of power system.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1
H H H H H L H L L M M H
CO2
H H H H H L H L L M H H
CO3
H H H H H M H L M M H H
CO4
H H H M H H M M H M H H

Course Contents:
Symmetrical Fault Analysis Without & With Pre-Fault Load Currents. Symmetrical Component
Transformation Three Phase Power in Unbalanced Circuit In Terms Of Symmetrical Component Sequence
Impedance of Generator Transformer Transmission Line & Passive Loads Phase Shift In Y/Delta Three
Phase Transformer (Yd1, Yd11 Connection). Unsymmetrical Fault Analysis: L-G, L-L-G-, L-L-L, L-L-L-
G, Open Conductors Fault Using Symmetrical Components.Selection of Circuit Breakers Ratings, Current
Limiting Reactors.

Stability of Power System – Steady State Dynamic and Transient Stability Definition and Comparison
Dynamics of Synchronous Machine Swing Equation Swing Equation for Single Machine Connected To
Infinite Bus, Power Angle Equation. Steady State Stability Studies

58
Transient Stability Studies: Swing Curve, Equal Area Criterion for Transient Stability Application of
Equal Area Criterion for Different Disturbances. Solution of Swing Equation by Point by Point Method,
Methods of Improving Transient Stability
Economic Operation of Power System: Introduction, Distribution of Load between Units within the
Plant. Optimum Generation Scheduling, Considering, Transmission Losses Representation of
Transmission Loss Using Loss Formula Co-Efficient Derivation of Loss Formula Co-Efficient Simulation
of Co-Ordination Equation on Digital Computer
Grounding Of Neutral in Power System Shunt & Series Compensation Generalized Equation, Shunt
Reactor Compensation of Very Long Line with Intermediate Switching Station. Series Capacitor
Compensation at Line Centre Shunt Reactor at both Ends and Series Capacitor in Middle of Line
Elementary Idea of Sub-Synchronous Resonance Problem and Counter Measures
Text Books:
1. W.D. Stevenson Jr., Elements of power system analysis, McGraw-Hill publications, 3rd Edition
2. I. J. Nagrath, D. P. Kothari, Power System Engineering, Tata McGraw-Hill publications,2008

Reference Books:
1. John J Grainger , W.D. Stevenson , Power System Analysis, McGraw-Hill ( India) Pub. , 2003
2. Prabha Kundur, Power System Analysis and Control , TMH, 2008
3. O. I. Elgerd, Electric Energy Systems Theory, McGraw-Hill publications 1971
4. Hadi Saadat, Power System Analysis , TMH , 2002

59
EEL226: POWER ELECTRONICS
4 Credits (3-1-0)

Course Objectives:

 To learn different power semiconductor devices.

 To learn different converter topologies, their operation and applications.
Course Outcomes:
Students are able to
1. Understand the basic concepts of semiconductor switches.
2. Understand operation and applications of AC-DC and cyclo converters.
3. Understand the operation and application of inverters and DC-DC converters.
4. Comprehend control techniques of various converters.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H M H M M L L - - L M H
CO2 H H H M H M M L M L M H
CO3 M M M M H L L L - L H H
CO4 M M M M H L L - - L H H

Course Contents:

SCR and its Characteristics, Series and Parallel Connections of SCRs, Protection Circuit Design, Line
Commutated Converters: Working of Single Phase, Three Phase Bridge Converters. Effect of Source
Inductance in Converters, Speed Control of DC Motor using Converter.
AC Voltage Controllers, Cyclo-Converters (Single Phase)

Static Controllable Switches: Characteristics and Working of MOSFET. Gate Turn off Thyristor and
Insulated Gate Bipolar Transistor.
D.C Choppers: Classification, Buck, Boost, Buck-Boost, CCM, DCM modes of operation, Application of
Choppers.
Single Phase and Three Phase Bridge Inverters: Output Voltage Control, Harmonics in Output Voltage
Waveform,

60
Harmonics Attenuation by Filters, Harmonic Reduction by Pulse Width Modulation Techniques concept of
SVPWM. Working of Current Source Inverters, few Applications of Inverters, Principle of Resonant
Inverter

Text Books:

1. M. Rashid, “Power Electronics”, Pearson Education India, 2004.

2. Ned Mohan, “Power Electronics”, Third Edition, 2012, John Willey.

Reference Books:
1. M.D. Singh, K.B. Khanchandani, “Power Electronics”, Tata McGraw Hill.
2. C.Y. Lander., “Power Electronics”, Third Edition, 1993, McGraw Hill International.
3. B.K .Bose, “Modern Power electronics”, 2003,Pearson Education India.
4. Joseph Vithyathil, “Principles of Power Electronics”, First Edition, 2010,Tata McGraw Hill.

61
EEP226: POWER ELECTRONICS LAB
1 Credit (0-0-2)
Corse Outcomes:
Students are able to:
1. Understand the switching behavior of various semiconductor switches experimentally.
2. Design the magnetic circuit, power circuit and control circuit of various power electronic
converters.
3. Simulate and analyze various power electronic converters with different control techniques.
4. Analyze the results of different power electronic converters with various control techniques
under varying operating conditions.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H M H L M H L M M M H H
CO2 H M H M M H L M M M H H
CO3 H H H M H H H M H M H H
CO4 H H H H M H H M H M H H

List of experiments:
1. To study the V-I , It characteristics of SCR.
2. To study DC circuit breaker using SCR.
3. To study phase control AC-DC converter using SCR.
4. To study the relaxation oscillator using UJT.
5. Simulation of i) Single phase half wave rectifier.
ii) Single phase full wave fully controlled rectifier [R, R-L, R & high L].
6. To study four modes of operation of TRIAC
7. To study AC Voltage regulator using SCR/TRIAC.
8. To study single phase inverter using self-controlled devices as IGBT/MOSFET (single PWM,
9. Multiple PWM, Sinusoidal PWM)
10. To study the Three phase inverter.
11. To study DC-DC converter i) Buck converter ii) Boost converter.
12. Simulation of following experiments using PSIM
I. AC Voltage regulator using SCR
II. Single phase inverter using self-controlled devices as IGBT/MOSFET (Single PWM,
Multiple PWM, sinusoidal PWM)
III. Three phase inverter.

62
IV. DC-DC converter
a. Buck converter.
b. Boost converter.

63
EEL305: CONTROL SYSTEMS -I
4 Credits (3-1-0)

Course Objectives:

 The lessons in basics of control systems will familiarize with the mathematical frame work of the
system modeling and analysis.
 Introduction to various techniques used in analysis of the dynamical system.

Course Outcomes:
Student will be able to:
1. Do mathematical modelling and derivation of transfer function of various systems
2. Determine the stability of system and analyse the system in time domain.
3. Analyse the systems in frequency domain
4. Do state space modelling of system and its analysis.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 L M L M M M - L M M L H
CO2 M M M M H M L L M H L H
CO3 H H M M H M L L M H L H
CO4 M M H H H M L L M H L H

Course Contents:
Introduction: Introduction to automation and automatic control, Broad spectrum of the control system
applications. Block-diagram and signal-flow-graph algebra.
Mathematical modeling of dynamical systems: Differential equations, Transfer functions. Input-output
description of Electrical, electromechanical and other control system components. Servomechanisms and
regulators. Loading effect. Concept of feedback and its effect on system parameter variation and
disturbances acting on the system.
Time response analysis: Standard inputs used for analysis. First order and second order system time
response. Concept of system type and time constants. Time response characteristics. Correlation of the root
location to the time response. Dominant poles and approximate time response for higher order system.
Stability analysis: Characteristic equation of a system. Condition for stability. Routh-Hurwitz criterion,
special cases for determining relative stability.

64
Root-locus technique: Relation between open-loop and close-loop system characteristic equations. Need
and basic idea of root-locus technique. Construction of root-locus. Assessing close-loop system stability
from root-locus. Effect of adding poles and zeros on the root-locus of a system.
Frequency response analysis: Concept of frequency response of a dynamical system. Construction of Bode
plot and polar plot for a system. Conformal mapping, Nyquist contour and construction of Nyquist plot for
a system. Nyquist stability criterion and stability margins. Reading the stability margin on Bode plot and
assessing close-loop stability. Effect of gain variation and addition of poles and zeros on the frequency
response plots.
State space technique: Concept of system state and state variable. Writing system math model in state
variable form. Derivation of transfer function from state variable model. Introduction to concept of
controllability and observability.

Text Books:

1. Benjamin C Kuo, “Automatic Control Systems”, Prentice Hall of India.

2. M. Gopal, “Control Systems- Principle of Design”, Fourth Edition, 2012, McGraw Hill.
3. I.J. Nagrath, “Control Systems Engineering” ,New Age International Ltd. , 2000

Reference Books:
1. D’AzzoHoupis, Logakusha, Huelsoman, “Linear System Analysis”, McGraw Hill.
2. Richard C. Dorf and Robert H. Bishop, “Modern Control Systems”, Pearson Education Inc.
3. Norman S Nise, “Control System Engineering”, John Wiley & Sons.
4. Katsuhiko Ogata, “Modern Control Engineering”, Prentice Hall of India

65
EEP305: CONTROL SYSTEMS – I LAB
1 Credit (0-0-2)
Course Outcomes:
Students are able to:
1. Understand concepts of sensors and error detector

2. Understand the concepts of time response

3. Hands on experience on basic PID controller tuning

4. Using MATLAB for design and analysis of control systems.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H L L L L L L L L L L H
CO2 H H L L L L L L L L L H
CO3 M L H L M L L L H L L H
CO4 L H H H H L L L H M L H

List of experiments:
1. To Study the characteristics of Potentiometer as an error detector.
2. To Study the characteristics of a
i. Synchro transmitter
ii. Synchro as an error detector
3. To Study transient response of second order R-L-C Circuit using discrete components.
4. To study the Torque-Speed characteristics of Two Phase A.C Servo motor.
5. To Study the effect of addition of pole to the second order closed loop control system by using
MATLAB.
6. To Study the frequency response of a second order R-L-C series circuit using discrete components.
7. To Study the phase lead and phase lag networks using discrete components.
8. To study the effect of addition of pole on frequency response of second order closed loop system
by using MATLAB
9. To study the effect of Zero and pole to open loop transfer function of a second order system with
unity feed-back by using MATLAB.
10. To study the effect of PID controller using a Kit.

66
EEL307: ELECTRICAL MACHINE DESIGN
3 Credits (3-0-0)
Course Objectives:

 To teach the design principles of magnetic circuit and winding, three phase transformers and 3
phase induction motor.
 Study of heating and cooling of machines.
Course Outcomes: -
Students are able to:-
1. Understand EE material properties and concept of specific loading and heating cooling of
machines
2. Design Distribution and power transformer.
3. Design Three phase induction motor and synchronous machine
4. Compute the performance of machine from design data
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H H M M L L L L - L L
CO2 H H H H H L L L L - M L
CO3 H H H H H L L L L - M L
CO4 H H H H H L L M L - M L

Course Contents:

Review of material used in construction of electrical machines. Classification of insulating materials

depending upon permissible temperature rise, properties of transformer oil, standard specifications, c.m.r.
and short time rating of machine. Heating and cooling characteristics.
Transformer design: specific loading, equation for voltage per turn for power and distribution transformer
output equation.
Principle of electric and magnetic circuit, design, method of cooling and cooling circuit, design estimation
of performance characteristics from the design data.
Induction motor: main dimensions, output equation, loading constants, estimation of axial lengths, air gap
diameter, winding design. Air gap length, slot dimension for stator and rotor, cage rotor and wound rotor
design, calculation of no load current and other performance on characteristics for design data.

67
Synchronous machine: air gap length, method of obtaining sinusoidal output voltage, field coil design for
salient pole machine and turbo generator rotor. Ventilation of synchronous generator, cooling air circuits,
closed ventilation, quantity of cooling medium- hydrogen and water as cooling media.

Text Books:

1. M. G. Say, “Performance and design of A.C. Machines”, Third Edition,2002,CBS Publisher.

2. A. K. Sawhney, “Electrical Machine Design”, 2013, Dhanpat Rai and sons.

Reference Books:

1. M.V. Deshpande, “Electrical Machine Design” Third Edition, 2009,PHI Learning Pvt Ltd.
2. J Pyrhonen,T. Jokinen and V.Hrabovcova, “ Design of Rotating Electrical Machines” , Wiley,2009.

68
EEL327 ELECTRIC POWER DISTRIBUTION SYSTEM
3 Credits (3-0-0)

Course Objectives:

 Understanding Energy /Load Forecasting system

 Learning about Power distribution system
 Study of Automation – SCADA

Course Outcomes:
1. Understanding of Distribution Automation system
2. Command over SCADA
3. Details of energy system management are learnt

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H M M H H M M L - - M L
CO2 H H H H H M H L - - M L
CO3 M M H M M L L L - - M L

Course Contents:
Load and Energy Forecasting: Distribution of Power, Management, power Loads, Load Forecasting, Power
System Loading, Technological Forecasting. Need Based Energy management (NBEM) -Objectives,
Advantages, Distribution Management system (D.M.S.)
Distribution Automation: Definition, Restoration/Reconfiguration of distribution network, Different
methods and constraints. Interconnection of Distribution, Control and Communication Systems.
SCADA: Introduction, Block Diagram, SCADA Applied to distribution Automation. Common functions
of SCADA, Advantages of distribution Automation through SCADA
Calculation of optimum number of switches, Capacitors, Optimum Switching devices Placement in Radial
Distribution Systems, Sectionalized Switches-Types, Benefits, Bellman’s Optimality Principle ,Remote
terminal Units.
Maintenance of Automated Distribution Systems, Difficulties in Implementing Distribution Automation in
Actual Practice, Urban /Rural Distribution, Energy Management

69
Text Books:
1. Pabla A.S., ‘Electric Power Distribution ‘ ,Tata McGraw Hill Publishing Co.Ltd .,Fourth Edition,
2000
2. Khedkar M.K., Dhole G.M. ’A text book of Electronic Power Distribution Automation University
Science Press, 2010
Reference Books:
1. James Momoh ‘Electric Power Distribution, Automation Protection and Control ‘, CRC Press.,1st
edition, 2007
2. Anthony J.Pansini ‘Electric Distribution Engineering ‘, CRC Press, 3rd edition, 2006

70
EEL328: OPTIMIZATION TECHNIQUES
3 credits (3-0-0)

Course Objectives:
 To study classical and advanced techniques in optimization.
 To apply knowledge of optimization theory to Electrical Engineering area.

Course Outcomes:
Students will be able to:
1. Formulate optimization problems as mathematical programming problems.
2. Examine the optimal solution of any optimization problem.
3. Apply classical optimization techniques to solve linear and nonlinear optimization problems.
4. Apply modern optimization techniques to solve the optimization problems.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H L L L M L L - - - L L
CO2 M L L L M L M - - - L L
CO3 H M L L M L M - - - M L
CO4 H M H M L L H - L L H M

Course Contents:
Introduction – Historical Development, Engineering applications of optimization, statement of an
optimization problem, Formulation of optimization problem, classification of optimization techniques.
Classical optimization techniques - single variable optimization and multivariable optimization with and
without constraints.

Linear programming –Graphical method, Simplex method, Revised simplex method, Duality in linear
programming, Dual simplex method, Sensitivity analysis, Application for solving relay coordination
problem.

Non-linear programming – Unimodal function, One dimensional minimization – unrestricted search,

Fibonacci search method and Golden section method, Unconstrained optimization - direct search method

71
(simplex method), Descent methods (steepest descent method and conjugate gradient method), Constrained
optimization – sequential quadratic programming method.

Dynamic programming – Multistage decision processes, concept of sub optimization and principle of
optimality.
Evolutionary algorithms for optimization and search; Applications in Electrical Engineering.

Text Books:
1. Engineering Optimization: Theory and Practice, S.S.Rao, New Age International Pub.2011.
2. Operations Research, H.A.Taha, Prentice Hall India Pub., 2007.

Reference Books:
1. Introduction Operations Research, Fredrick S.Hiller Gerald J.L. Lieberman Tata McGraw Hill
Pub., 2004.
2. Operations Research – Theory and Applications, J. K. Sharma, Macmillan India Pub., 2009.
3. K. Deb, “Optimization for Engineering Design – Algorithms and Examples”, Prentice-Hall of India
Pub., 1995.

72
PHL202: INTRODUCTION TO MATERIAL SCIENCE
3 Credits (3-0-0)

Course objectives:

 To learn in depth about electrical and magnetic properties of materials.

 To study properties of dielectric and semiconductor materials.
Course Outcomes:
Students are able to
1. Grasp the basics of electrical properties of material.
2. Understand the concepts of magnetic properties of material.
3. Know about semiconductor material technology.
4. Appreciate the concepts of dielectrics.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H H H L M L H - H H
CO2 H H H H H L M L H - H H
CO3 H H H H H L M L H - M H
CO4 H H H H H L H L H - M H

Course Contents:

Electrical Conduction: Electronic and Ionic Conduction, Conductivity in Metals, Ohm’s Law, Relaxation
Time, Collision Time, Mean Free Path of an Electron, Electron Scattering, Resistivity of Metals, Effect of
Temperature and Impurity on Conductivity, Joule’s Law, High Conductivity and Resistivity Materials,
Superconductivity and Applications
Polarization of Dielectrics : Polar and Non-Polar Dielectrics , Basic Concept of Polarization , Types of
Polarization, Dielectric Constant ,Internal Field in Dielectrics , Ferroelectric ,Spontaneous Polarization,
Curie-Weiss Law, Piezoelectric and Pyroelectric , Dielectric Loss , Breakdown in Dielectrics, Dielectric in
Alternating Field : Dielectric Properties of Insulators in Alternating Fields, Complex Dielectric Constant ,
Electronic Polarization , Ionic Polarization , Frequency Dependence of Electronic Polarization, Dielectric
Constant of Non-Polar Solids , Dipolar Relaxation , Loss Tangent

Magnetic Properties of Materials: Atomic Interpretation of Diamagnetic, Paramagnetic, Anti-

Ferromagnetic and Ferromagnetic Materials. Ferromagnetic Domain, Alloy for Core Materials for Rotating

73
Machines, Transformers, Permanent Magnets and Non Magnetic Steels, Nonmetallic Magnetic Materials,
Thin Film Magnets, Magnetic Materials for Ferromagnetic Tape and Memory Devices

Semiconductor Material Technology: Method for Material Preparation, Purification and Doping,
Introduction to Processes of Manufacturing Semiconductor Devices, Transistors, Integrated Circuits.
Monolithic Diodes, Integrated Resistors and Integrated Capacitor.
Wide band semiconductors.

Text Books:

1. Dekkar, A.J.,“Electrical Engineering Materials, Reprint Edition”,2009, Prentice Hall Publications

Co.
2. Kasap S.O., “Principle of Electronic Materials and Devices”, Second Edition, Tata McGraw- Hill.

Reference Books:

1. S.O Pillai., “Solid State Physics”, Third Edition, New Age International Publishers.

74
 SIXTH SEMESTER

EEL329: SWITCHGEAR AND PROTECTION

3 Credits (3-0-0)

Course Objectives:

 Comprehensive exposure to philosophy and technology of protection.

 Introduction to switchgear.

Course Outcomes:
Students are able to
1. Appreciate the philosophy of protective relaying.
2. Apply Over-Current protection for protection of various power system elements.
3. Understand Differential Protection for transformer , bus bar and motor Protection
4. Apply Distance Protection( Carrier and non-carrier) for EHV Lines
5. Comprehend switching phenomenon and the working of various types of circuit breakers and
their duties.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L L - - - L L -
CO2 H H H H M L - - - L L -
CO3 H H H H M L - - - L - -
CO4 H H M H M L - - - L L -
CO5 H H L L L L - - - L L -

Course Contents:

General philosophy of protective relaying: protective zones. Attributes of relays, Primary protection back
up protection, remote and local back up, Medium voltage line protection: over current relaying directional
over current relays
High voltage line protection: distance relays, carrier distance schemes. Unit carrier schemes
Equipment protection: principles of differential relaying, protection of generator, transformers and bus bars
by differential relaying and other relays. Protection of induction motor’s against overload, short-circuits,
thermal release, miniature circuit breaker.

75
Introduction to static relays: comparison of static and electro-mechanical relays, two input amplitude and
phase comparators and their duality, generation of various distance relay characteristics using above
comparators.
Introduction to numeric protection: Basic principles, filtering, Aliasing, introduction to algorithms.
Switchgear: circuit breakers, arc interruption theory, recovery and re-striking voltages, RRRV, breaking of
inductive and capacitive current. Different media of arc interruption, construction and operation of air
blast, sf6 and vacuum breakers

Text Books:

1. C.R. Mason –“Art and Science of Protective Relaying”, John Wiley & Sons, New York, 1977.
2. Y. G. Paithankar, S.R. Bhide – “Fundamentals of Power System Protection”, PHI, 2nd edition,
2010.

Reference Books:

1. S. H. Horowitz, A. G. Phadke –“Power System Relaying”, 3rd ed. John Wiley & Sons, 2008.
2. J. L. Blackburn, T. J. Domin – “Protective Relaying, principals and application”, 3rd ed. CRC
press, 2007.

76
EEP329: SWITCHGEAR AND PROTECTION LAB
1 Credit (0-0-2)
Course Outcomes:
Students will be able to
1. Working and characteristics of non-directional and directional over-current relays
2. Working and characteristics of various types of distance relays
3. Basics of different protection and its application to 3-phase transformer
4. Simulation of static relays
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H H M M M L M L M M L H

CO2 H M M M ML M L L M M L H
CO3 H H M M M L M L M M L H

CO4 H M H M M L M L M M L H

List of experiments:

1. Plotting characteristics of IDMT relay.

2. Finding through fault stability of a simple differential scheme.
3. Plotting characteristics of directional over-current relay.
4. Plotting characteristics of Mho relay on R-X plane.
5. Study of response of percentage biased differential protection scheme for a 3-phase delta/star
transformer for various faults like L-G, L-L, L-L-G, L-L-L and inter-turn faults.
6. Plotting characteristics of a simple impedance relay on R-X plane.
7. Plotting characteristics of reactance relay on R-X plane.
8. Simulation of sine and cosine type comparators in MATLAB/Simulink.

Text Books:
1. C.R. Mason, “Art and Science of Protective Relaying”, Wiley Eastern, 1977.

Reference Books:
1. English Electric Relay Application Guide.
2. S.H. Horowitz and A.G. Phadke, “Power System Relaying”, John Wiley & Sons/RSP , 2008.
3. Y.G. Paithankar, “Transmission Network Protection: Theory and Practice”, Marcel Dekker, 1998.
4. Y.G. Paithankar, S.R. Bhide, “Fundamentals of Power System Protection”, PHI Learning, 2010.

77
EEL330: MICRO CONTROLLERS
3 Credits (3-0-0)

Course Objectives:
• Need and advantages of microcontrollers and microprocessors in electrical engineering should be
understood
• Students should be able to use and program microcontrollers and microprocessors

Course Outcomes:
Students are able to:-
1. Understanding 8051, AVR and ARM architecture
2. Learning assembly programming
3. Learning interfacing of Arduino and DSP processors
4. Understanding applications of DSP processors

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

CO1 H M H L H M H L M L L H
CO2 H H H M M M H L M L L H
CO3 H H H H M M H L H H L H
CO4 H M H H M H H H H L H H

Course Contents:
● Preview
− Basics of Digital circuits
− Need and advantages of uCs and uPs
● Architectures
−8051
− AVR
− ARM
− DSP Processors
● Assembly Programming
−8051
− DSP Processors
● Interfacing
− Arduino interfacing
− DSP processors interfacing

78
 ● Applications of uCs and uPs
− ARM applications
− DSP Processor applications

Text Books:
1. “The 8051 Microcontroller and Embedded Systems using Assembly and C” by Mazidi, Pearson
Education India; 2nd edition, 2007
2. “Digital Signal Processors: Architecture, Programming and Applications” by Venkataramani,
TMH, 2002
Reference Books:
 “The 8051 Microcontroller” by Kenneth Ayala, CENAGE LEARNING; 3rd edition, 2007

79
EEP330: MICROCONTROLLERS LAB
1 Credit (0-0-2)
Course Outcomes:
Students will be able to
1. Understanding assembly programming
2. Understanding timer and port algorithm
3. Understanding interrupts, stack, RAM and ROM
4. Understanding hardware interfacing
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L H H M H L H M H H
CO2 H H L H H H H M H M H H
CO3 H H M H H M H L H M H H
CO4 H M H H H H H M H H H H

List of Experiments:
1. Introduction to assembly programming for 8051 (Arithmetic and logical operators)
2. Ring counter/ Johnson counter
3. BCD addition/ subtraction
4. Data transfer using stack/ external RAM/ROM
5. Square wave using timer
6. LCD Display/ motor/ key pad interfacing
7. Serial port and interrupt programming
8. Demonstration experiment on TMSC320 development board

80
EEL326: INDUSTRIAL AUTOMATION
3 Credits (3-0-0)
Pre-requisites: -EEL204

Course Objectives:

1. To learn about automation systems in industries

2. To learn various ways to program PLC
3. To study PLC and robotics applications

Course Outcomes:

Students are able to

1. Discuss basics of PLC such as architecture, I/O addressing, scan cycle, etc..
2. Develop programs for PLC.
3. Design logic for industrial applications.
4. Explain basics of robotics.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H L L L M L M L L M M L
CO2 H M M L M L M L M M M L
CO3 H L L L M L H L L M M M
CO4 H H H M H L H M M M H M

Course Contents:

Introduction to Industrial Automation and Control: Definitions of Automation and Control, Relation
between Automation and Information Technology, Role of Automation in Industry, Functional elements of
Industrial Automation Systems that perform a variety of functions related to Instrumentation, Control,
Supervision and Operations Management, Automation using PLC and SCADA.

Introduction to PLC: Definitions& History of PLC, PLC systems, I/O Modules, CPU, Memory, Power
supplies, Programmer, Advantages &limitations, Selection criteria for PLC.

Programming of PLC: IEC Programming Standard, Ladder Diagram, Function Block Diagram, Instruction
List and Structured Text, Construction of PLC ladder diagram, Basic components & their symbols in

81
ladder diagram, Fundamentals of ladder diagram, Boolean logic & relay logic, Analysis of rungs, Input
ON/OFF switching devices, input analog devices, Output ON/OFF devices, Output analog devices.

Advanced PLC Function: Analog PLC operation, PID control of continuous processes, simple closed loop
systems, problems with simple closed loop systems, closed loop system using PID controller, PLC
interface, and Industrial process example.

Motors Controls: AC Motor starter, AC motor overload protection, DC motor controller, Variable speed
(Variable Frequency) AC motor Drive.

Text books:

1. Khaled Kamel and Eman Kamel, “Programmable Logic Controllers: Industrial Control”, First
Edition, McGraw-Hill Education, 2013.
2. David Deeg, Jon Stenerson “Siemens Step 7 (TIA PORTAL) Programming, a Practical Approach”,
2nd Edition, 2019.
3. Mikell Groover, Mitchell Weiss, Roger Nagel, Nicholas Odrey, Ashish Dutta, “Industrial Robotics
-Technology, Programming and Applications”, 2nd Edition, McGraw Hill Education, 2017.
Reference Books:
1. Gary Dunning, Cengage, “Introduction to Programmable Logic Controllers”, Third Edition, 2006,
Learning Pub.
2. Frank D. Petruzella, “Programmable Logic Controllers”, 2005, Tata McGraw Hill Pub.
3. W. Bolton, “Programmable Logic Controllers”, Fifth Edition, 2009, Newnes Pub.
4. A. James Rehg, Glenn J. Sartori, “Programmable Logic Controllers”, 2007, Prentice Hall.
5. R. Mehra, V. Vij, “PLCs & SCADA - Theory and Practice”, Laxmi Pub.

82
EEP326: INDUSTRIAL AUTOMATION LAB
1 Credit (0-0-2)
Course Outcomes:
Students are able to:
1. Understand the basics of working of PLC, IO devices
2. Develop program for PLC using LAD and FBD languages
3. Become aware industrial automation applications using PLC
4. Develop HMI for SCADA applications
Mapping with POs (Refer PO’s given on page numbers 6 and 7):
1.
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1
2. H L M L M L M L H M L H
CO2
3. H H H M M L M L H M L H
CO3 H H H H M M H M H H M H
4.
CO4 H M H H H M H M H H H H

List of Experiments:
1. Implementation of various Logic gates in PLC using Ladder diagram and function block diagram
programming language (objective being to become familiar with Siemens Sematic S7-1200 PLC
system and TIA portal).
2. Direction control of conveyor belt using different types of proximity sensors.
3. Star delta starter of induction motor using PLC.
4. Direction and speed control stepper motor using a) driver card and b) wave drive mode.
5. To control prototype bottling plant unit using PLC.
6. To study pick and place robot.
7. To study on-off control of heater of oven using PLC & HMI
8. Closed loop temperature control of oven using PLC
9. Closed loop speed control of dc motor PLC.
10. Assignments

83
EEL402: HIGH VOLTAGE ENGINEERING
3 Credits (3-0-0)

Course Objectives:

 Understanding the breakdown phenomenon of insulating materials used in electrical system.

 Various high voltage generation and measuring techniques.
 Electrical Apparatus Quality evaluation through testing methodologies
Course Outcomes:
Students are able to
1. Understand high voltage breakdown phenomena in insulating materials.
2. Design insulation scheme of electrical machines.
3. Know the generation and measurement of high voltage quantities.
4. Analyze the test procedures as per the standards.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M H M M L L L M L L H
CO2 H H H H H M L L M M H H
CO3 H H H M M M L L M L M H
CO4 H M M L H M L L M L L M

Course Contents:

Breakdown Mechanism in Dielectrics: Ionization Process, Townsend’s Criterion for B.D.: Breakdown in
Electro-Negative Gases. In Non-Uniform Fields Corona Discharges and Introduction of Corona, Post B.D.
Phenomenon and Applications, Practical Considerations In Using Gases for Insulation Purpose, Vacuum
Insulation: Liquid As Insulators. of Solid Di-Electrics in Practice: B.D. In Composite Dielectrics
Lighting and Switching Over Voltages: Mechanism of Lighting, Types of Strokes, Parameter
Characteristics Lighting Strokes, Characteristics Switching Surges: Power Frequency Over Voltages
Control of O.V. Due To Switching. Protection of Lines by Ground Wires, Protection by Lighting Arrester,
Gap Type and Gapless L.A. Selection of L.A. Ratings, Surge Absorbers

Traveling Waves and insulation Co-Ordination: Traveling Waves on Transmission Lines. Classification of
Lines Attenuation and Distortion of Traveling Waves Reflection and Transmission of Waves Behaviours
of Rectangular Waves at Transition Points Introduction to Insulation Co-Ordination Associated Terms.
Impulse Wave-Form Introduction to BIL Reduced BIL and SIL

84
Generation of High Voltages and Currents: Generation of High D.C. Voltages by Rectifiers. Voltage
Doublers and Multiplier Circuits (Derivations of Not Required), Electrostatic Machines. Generation AC
Voltages by Transformers Resonant Transformer Generation of High Frequency AC High Voltages,
Generation of Impulse Voltages Standard Impulse Wave Shapes Analysis of Model and Commercial
Impulse Generation Circuits Wave Shape Control Marx Circuit Tripping and Control of Impulse
Generation. Generation of Switching Surges Generation of Impulse Current. Measurement of High AC and
DC Voltages by Micro Ammeter

Measurement of High voltage and currents: Generating Voltmeters Resistance and Potential Divider
Series Impedance Voltmeters CVT Magnetic Type Potential Transformers. Electrostatic Voltmeter Peak
Reading AC Voltmeters Sphere Measurement of Impulse Voltage by Potential Dividers and Peak Reading
Voltmeters Measurement of High AC DC Currents Measurement of High Frequency and Impulse Current
by Resistive Shunted (Bifilar Strip Shunt Only).
Non Destructive and High Voltage Testing of Electrical Apparatus: Non-Destructive Testing:
Measurement of DC Resistively, Measurement of Di-Electric Constant and Loss-Factor (Low and Power
Frequency Only), Schering Bridge for High Charging Circuits. For High Dissipation Factor, For Three
Terminal Measurement. Transformer Ratio Arm Bridges, Partial Discharge Measurements by Straight
Detectors by Balance Detectors, Calibration of Detectors, Discharge Detection in Power Cables High
Voltage Testing, Testing of Insulators and S/S Equipment’s

Text Books:

1. M.S. Naidu, V. Kamaraju, “High Voltage Engineering”, Tata McGraw Hill Publishing India, 1999.
2. C.L. Wadhawa, “High Voltage Engineering”, Wiley Eastern Ltd, New Age Ltd, India, 1995.

Reference Books:

1. E. Kuffel, “High Voltage Engineering Fundamentals”, Butterworth-Heineman, 2000.

85
EEP402: HIGH VOLTAGE ENGINEERING LAB
1 Credit (0-0-2)
Course Outcomes:
Students will be able to
1. Understand structure and materials of different insulating material
2. Study and test the breakdown voltage of solid and liquid insulating material
3. Study and observe flash over voltage and corona phenomena
4. Work with impulse generator and sphere gap arrangement
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H L H M L M M L L L L H
CO2 H H M H L M M L M M L H
CO3 H H M M L M M L M M L H
CO4 H H M H H L M L H M L H

List of experiments:

1. To determine the breakdown voltage of different solid insulating materials.

2. Testing of transformer oil for breakdown voltage.
3. Calibration of voltmeter by sphere gap arrangement.
4. To study different types of line insulators.
5. To study and find the string efficiency of a given string of insulators.
6. To determine the flashover voltage of pin type insulators under dry and wet conditions.
7. To study the corona phenomenon in overhead lines.
8. To study Impulse Generator.
9. Study of Schering Bridge for capacitance and tan δ measurement of insulating material.

86
MEL424: INDUSTRIAL ENGINEERING & MANAGEMENT
3 Credits (3-0-0)

Course Objectives:
 To understand various fundamental disciplines of management like personnel management,
marketing management, financial management etc.

 To apply this basic knowledge to understand the working of corporate world.

Course Outcomes:
Students are able to:
1. Understand basics of management
2. Develop understanding of personnel management
3. Appreciate marketing management
4. Demonstrate understanding of material and financial management
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M M L H H M H H H H H
CO2 H M M L H H M H H H H H
CO3 H M M L H H M H H H H H
CO4 H M M M H H M H M H H H

Course Contents:
Principles of management: Concepts of management, development of scientific management, principles of
Fredric Taylor & functions such as planning organizing, staffing, leading motivating, communicating,
controlling, decision making, span of control.
Personal management: Meaning, functions of personal management, manpower planning, collective
bargaining, wages & salary administration, labor welfare, training, trade unions, industrial factories Act,
industrial boilers Act, Trade union act.
Plant management: Plant location, plant layout, types of maintenance such as break down, predictive &
preventive maintenance, stores of management, industrial safety, causes & cost of accidents, safety
programs, production planning & control, job, batch & process type of production
Marketing management: Definition & selling & modern concept of marketing, market research, new
product development, product life cycle product launching, sales promotion, pricing, channels of
distribution, advertising, market segmentation, marketing mix.

87
Material management: Importance of material management, classification, codification, forecasting,
necessity of inventory
Financial management: Sources of finance, financing organizations, types of capital, elements of costs &
allocation of indirect expenses, cost control, break even analysis, budgets & budgetary control, equipment
replacement policy, make or buy analysis, balance sheet, ratio analysis, profit & loss statement.

Text books:

1. Koontz, O Daniall, “Principles of management”,

2. Kotler P., Stauton “William Principles of marketing management”, Prentice Hall, 1985.
Reference Books:
1. S.C. Kuchal, “Financial Management”, Chaitanya Publishing House
2. T.R.,. Sharma S.C., “Industrial organization & engineering Economics”; Khanna Pub.

88
EEL304: ELECTRIC DRIVES & THEIR CONTROL
4 Credits (3-1-0)

Course Objectives:

 Understanding the operation of various drives.

 Learning about selection and control of motors.
 Idea about AC/DC Contactors/Relays

Course Outcomes:
Students are able to
1. Understand selection of drives for industries.
2. Know operation of contactors and relays.
3. Appreciate selection of drives and their control for traction purposes.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H H M M - - M - -
CO2 H H M H H M - - M - -
CO3 H H M M M M - - L - -

Course Contents:

General structure of electrical drives. Operation and control of Electrical drives.

Rating & Service Capacity: Selection of Motor, Power Capacity For Continuous and Intermittent Periodic
Duties, Load Equalization: Flywheel Effect, Speed-Time Relations

AC And DC Contactors And Relays: Magnetic Structure, Operation, Arc Interruption Contactor Rating,
H.V. Contactors Control Circuits for Automatic Starting and Braking of DC Motor and Induction motor
scalar control (Variable Frequency Drives) and control panel design.

Electrical Traction: Electric Traction system, Speed time curve. Mechanics of Train movement.
Traction motor: Motor Used in AC/DC Traction, Their Performance and Desirable Characteristics,
Requirements and Suitability of Motor for Traction Duty. Control of D.C. Traction Motor, Series Parallel
Control Starting and Braking of Traction Motor

89
Brief Idea About Drives Commonly Used in Industries, Digital Control of Electric Motors, Block Diagram
Arrangement, Comparison With other Methods of Control. Advanced methods of control of Electrical
Drives.

Text Books:
1. G.K Dubey, “Electrical Drives”, Second Edition, 2002, PHI.
2. M.L. Soni, P.V. Gupta, U.S.Bhatnagar, “A course in Electrical Power”, 1999, Dhanpat Rai & Sons.

Reference Books:

1. Vedam Subrahamanyam, “Electric Drives – Concepts & Applications”,1997, Tata McGraw-Hill.

2. H.Partab, “Art & Science of Utilization of Electrical Energy”, 1999, Dhanpat Rai & Sons.
3. H.Partab, “Modern Electrical Traction”,1973, Pritam Surat & Brothers.

90
EEL418: CONTROL SYSTEMS - II
3 Credits (3-0-0)

Course Objectives:
 Introduction to the classical control design.
 Introduction to Non-linear control and the digital control.

Course Outcomes:
Student will be able to;
1. Design and implement simple controllers for linear systems in continuous time
2. Design simple controller in state space representation.
3. Analyze the behavior of non-linearity in the system.
4. Analyze the behavior of digital systems.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 M H H H H - L L M - - M
CO2 M H H H H - L L M - - M
CO3 M H H H H - L L M - - M
CO4 M H H H H - L L M - - M

Course Contents:
Classical Control Design: System performance specifications, system sensitivity. Proportional,
Proportional-Integral, Proportional-Integral-Derivative, lead, lag and lead-lag compensator design using,
root-locus and frequency domain techniques. Ziegler-Nichols compensation. Design examples.

Modern Control: Solution of state equation, computation of state transition matrix (STM), properties of
STM. Characteristic equation and system stability. Controllability and Observality: Concepts, definitions
and Gilbert's and Kalman's tests. Writing the state-space model in phase variable, controllable and
observable canonical and diagonal canonical form. Pole-placement by full state feedback.
Non-Linear Control: Common physical non-linearities and their math model. Examples simple pendulum,
double pendulum, van der Pol oscillator. Phase-plane method and construction of phase trajectories (a)
Direct solution method and (b) Isocline method. Method of harmonic linearization, describing function its
calculation and use. Singular points of non-linear systems and their classification. Stability of non-linear

91
systems: Definitions, local stability, finite and global stability, stability test by indirect approach and
Liapunov's direct method. Introduction to feedback linearization and sliding mode control.
Digital Control: Basic Elements of discrete data control systems. Data conversion & quantization. Sample
and Hold devices. Mathematical modeling of the sampling process. Data reconstruction and filtering of
sampled signals: Zero order hold, first order hold. Review of z-Transforms, application of z-Transforms to
difference equations. Pulse transfer function and z-Transfer function. Discrete Data System with cascaded
elements separated by a sampler and not separated by a sampler. Characteristic equation in discrete
domain, correlation between time response and root locations in s-plane and z-plane. Stability tests of
discrete data systems: Bilinear transformation method, extension of RH criterion, Jury’s Stability Test.

Text Books:

1. Design of Feedback Control Systems, Stefani, Shahian, Savant, Hostetter, Oxford University
Press., 2001
2. Automatic Control Engineering, Francis H. Raven, McGraw Hill, Int. 5th edition, 1995

Reference Books:
1. Control System Theory, Olle I. Elgerd, McGraw Hill, Int.,1967
2. Digital Control of Dynamical Systems, G. F. Franklin, J. D. Powell and M. L. Workman, Pearson
Education Asia, 3rd edition, 1997
3. Applied Nonlinear Control, J. J. E. Slotine and W. Li, Prentice Hall, 1991
4. Nonlinear Systems, H. Khalil, Prentice Hall, 2002
5. Nonlinear Systems: Analysis, Stability, and Control, S.Sastry, Springer, 1st edition, 1991
6. Computer Controlled Systems - Theory and Design,K.J. Astrom, B. Wittenmark, Prentice Hall, 3rd
edition, 1996

92
EEL427: RESTRUCTURED POWER SYSTEMS
3 credits (3-0-0)

Course Objectives:
 Secured and reliable operation of power systems,
 Economic efficiency of restructured power systems
Course Outcomes:
Students are able to: -
1. Bring out the differences between the conventional power system operation and the restructured
one.
2. Design power markets and market architectural aspects.
3. Prepare a background with fundamentals of microeconomics.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H L H L L M M H M L L M
CO2 H L H M M H M H M L L M
CO3 H L M M H H H H M L H M

Course Contents:
Introduction to restructuring of power industry: Introduction, Reasons for restructuring / deregulation of
power industry, understanding the restructuring process, introduction to issues involved in deregulation,
reasons and objectives of deregulation of various power systems across the world.
Fundamentals of Economics: Introduction, consumer behavior, supplier behavior, market equilibrium,
short-run and long-run costs, various costs of production, relationship between short-run and long-run
average costs, perfectly competitive market.
The Philosophy of Market Models: Introduction, market models based on contractual arrangements,
comparison of various market models, electricity vis-à-vis other commodities, market architecture.
Transmission Congestion Management: Introduction, classification of congestion management methods,
calculation of ATC, non-market methods, market based methods, nodal pricing, inter-zonal intra-zonal
congestion management, and price area congestion management.
Locational Marginal Prices (LMP) and Financial Transmission Rights (FTR) : Mathematical
preliminaries, fundamentals of locational marginal pricing, lossless DCOPF model for LMP calculation,
loss compensated DCOPF model for LMP calculation, ACOPF model for LMP calculation, introduction to
financial transmission rights, risk hedging functionality of financial transmission rights, simultaneous

93
feasibility test and revenue adequacy, FTR issuance process, treatment of revenue shortfall, secondary
trading of FTRs, flow gate rights, FTR and market power, FTR and merchant transmission investment.
Ancillary Service Management: Introduction to ancillary services, types of ancillary services, classification
of ancillary services, load-generation balancing related services, voltage control and reactive power
support services, black start capability service, how to obtain ancillary services, co-optimization of energy
and reserve services.
Pricing of transmission network usage and loss allocation: Introduction to transmission pricing, principles
of transmission pricing, classification of transmission pricing methods, rolled-in transmission pricing
methods, marginal transmission pricing paradigm, composite pricing paradigm, merits and de-merits of
different paradigms, debated issues in transmission pricing, introduction to loss allocation, classification of
loss allocation methods.
Market power and generators bidding: Attributes of a perfectly competitive market, the firm's supply
decision under perfect competition, imperfect competition, market power, financial markets associated
with electricity markets, introduction to optimal bidding by a generator company, optimal bidding
methods.
US and European market evolution
Reforms in Indian power sector: Introduction, framework of Indian power sector, reform initiatives
during 1990-1995, and the availability based tariff (ABT), The Electricity Act 2003, open access issues,
power exchange, reforms in near future.

Text Books:
1. S. A. Khaparde, A. R. Abhyankar, “Restructured Power Systems” ,Alpha Science International,
Limited, 2006
2. Mohammad Shahidehpour, M. Alomoush, “Restructured Electrical Power Systems: Operation:
Trading, and Volatility”, CRC Press, 2001.

Reference Books:

1. Lorrin Philipson, H. Lee Willis , “Understanding electric utilities and de-regulation”, Marcel
Dekker Pub., 1998.
2. Steven Stoft , “Power system economics: designing markets for electricity”, John Wiley & Sons,
2002.
3. Kankar Bhattacharya, Jaap E. Daalder, Math H.J. Boolen , “Operation of restructured power
systems”, Kluwer Academic Pub., 2001.
4. www.nptel.ac.in, Restructured Power System (Web course), E-learning courses from IIT and IISC.

94
 SEVENTH SEMESTER
EED401: PROJECT PHASE I
2 Credits (0-0-2)
Course Objectives:
 To inculcate culture of handling all aspects of solution of a practical problem
 To develop ability to work in group with peers
 To understand, formulate and analyze the problem resulting into a novel solution
Course Contents:
1. Initiate the work on the topic in areas of electrical and electronics engineering as propose by Project
supervisor in terms of following
2. Literature Survey
3. Problem Definition

4. Preliminary investigation

5. Prepare plan of action based on above

6. Present seminars based on the work done at end of semester.

95
EEL408: ADVANCED POWER ELECTRONICS
3 Credits (3-0-0)
Pre-requisites: - EEL226

Course Objectives:
 To impart knowledge of recent and advanced developments in PE area.
 To study the advanced applications of PE converters.
 To introduce the new topologies of PE converters

Course Outcomes: -
Students are able to
1. Learn high performance rectifier and inverter
2. Design DC-DC converter.
3. Design new control techniques to control converters.
4. Appreciate new converter topologies

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H M L L L L L L L H
CO2 H M H M L L L L M L L H
CO3 H H M M M L - L M - - H
CO4 H H M M L L L L L L M H
Course Contents:
Advances in semiconductor devices.
Switch mode converter single phase and three phase: SM Inverters dc to ac / dc to sinusoidal ac and SM
rectifier mode of operation.
Four quadrant operation, harmonic analysis. Voltage control of inverter, different PWM technique SPWM,
600 PWM, third harmonic PWM, Space vector PWM, and their comparison
DC-DC converter: Steady-state analysis of non-isolated and isolated (Flyback and forward converter).
Power conditioner, Uninterruptible Power Supply Resonant converter, different topologies, ZVS/ ZCS
principle. New converter topologies.

96
Text Books:
1. N. Mohan, T.M. Undeland, W. P. Robbins, “Power Electronics, Converters, Applications and
Design”, John Wiley & Sons, 1995.
2. M. H. Rashid, “Power Electronics, Circuit, Devices and Applications”, Third Edition, 2000,
Prentice-Hall of India.

Reference Books:

1. Lender C. W., “Power Electronics”, Third Edition, 1989, McGraw Hill.

2. Joseph Vithayathil, “Power Electronics, Principles and Applications”, McGraw Hill.
3. Bin Wu, “High Power converter and AC drives”, Wiley –IEEE Press, (2006).

97
EEL409: HVDC TRANSMISSION
3 Credits (3-0-0)

Course Objectives:

 To expose the students to the state of the art HVDC technology.

 Methods to carry out modelling and analysis of HVDC system for inter-area power flow regulation

Course outcomes
Students are able to
1. Understand, analyse and model the HVDC long distance bulk power transmission systems.
2. Simulate converters using MATLAB SIMULINK.
3. Understand necessity of HVDC under deregulated environment.
4. Know different control methods and protective schemes of HVDC systems

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M H M M L L - - L M H
CO2 H H H M M L L L - L - H
CO3 M M M M H L L L - L H H
CO4 M M M M H L L - - L H H

Course Contents:

Development of HVDC Technology, DC versus AC Transmission, Selection of Converter Configuration.

Rectifier and Inverter Operation, Digital Simulation of Converters, Control of HVDC Converters and
Systems, Individual Phase Control, Equidistant Firing Controls, Higher Level Controls.
Characteristics and Non-Characteristics Harmonics Filter Design.
Fault Development and Protection, Interaction between AC-DC Power Systems.
Over Voltages on AC/DC Side, Multi-Terminal HVDC Systems, Control of MTDC Systems.
Modeling Of HVDC Systems, Per Unit System, Representation for Power Flow Solution, and
Representation for Stability Studies.

Text Books:

1. J. Arrillaga,“High Voltage Direct Transmission”, Peter Peregrinus Ltd. London, 1983.

98
 2. K. R. Padiyar, “HVDC Power Transmission Systems”, Wiley Eastern Ltd., 1990.

Reference Books:
1. E. W. Kimbark, “Direct Current Transmission”, Vol.I, Wiley Interscience, 1971.
2. Erich Uhlmann, “Power Transmission by Direct Current”, B.S. Publications, 2004.

99
EEL428: INTRODUCTION TO ELECTRIC VEHICLES
3 Credits (3-0-0)

Course Objectives:
 To discuss the need of the electrification of conventional Internal combustion engine (ICE) vehicles
to improve the performance and reduction in emission contributed by the ICE Vehicles.
 To identify, model, size the components/Subsystems of hybrid electric and electric vehicle and
analyse the performance at introductory level.

Course Outcomes:
1. Understand the need of the electrification of Internal combustion engine (ICE) vehicles, vehicle
architecture and dynamics.
2. Identify and classify different on-board energy sources for appropriating sizing and utilization to
ensure extend autonomy and life of the on-board sources by appropriate power flow management
3. Take decision on the selection of appropriate traction drives and its control as per the traction need
and energy recovery.
4. Understand and evaluate different charging methodologies related control strategies ensuring
proper charging of on-board batteries and battery life, and having brief knowledge of vehicular
communication.

Mapping of Cos with Pos

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 3 2 2 - 2 - 2 1 1 3
CO2 3 2 3 2 2 - 2 - 2 1 1 3
CO3 3 2 3 2 2 - 2 - 2 1 1 2
CO4 3 2 3 3 2 - 2 - 2 1 1 3

Course Contents:

Electric Vehicle architecture and dynamics: Architecture of a hybrid electric vehicle, Dynamics of a
vehicle, concept of driving cycles and their significance in performance evaluation; various load
components and calculation of tractive power.
On-board energy storage systems and power flow management: Classifications and characteristics of
on-board energy and power sources (battery, fuel cells, photovoltaic panel, ultra-capacitors, and flywheel)
and their sizing and utilization (combination of ultra-capacitor or flywheel with battery/fuel-
cell/photovoltaic panel) as mixed energy storage/supply system for improved performance during
acceleration and regenerative breaking to ensure extended autonomy.
Traction drives for electric vehicle: Requirements of a traction motor, speed torque characteristics,
concept of electric braking, energy recovery from vehicle dynamic; PM BLDC motor control for light
electric vehicle.
Electric vehicle charging: Structure and types of charger; electric and electrothermal modeling of a
battery, state of charge and health estimation; charging strategies; Design of a PV fed charger; battery

100
management system (includes methodologies for state of charge estimation, active and passive balancing
strategies)
Vehicular communication: Architecture and protocols for the communication between the on-board
subsystems of the vehicle, vehicle and grid, and vehicles in vicinity (for the case of autonomous vehicles),
communication protocols.

Text Books:
1. Iqbal Husain, “Electric and Hybrid Vehicles: Design Fundamentals,” CRC Press, Taylor and
Francis, 2005.
2. M. Ehsani, Y. Gao and A. Emadi, “Modern Electric, Hybrid Electric and Fuel cell vehicles:
Fundamentals, theory and design,” second edition, CRC Press, Taylor and Francis, 2010.
3. W.B. Ribbens, “Understanding Automotive Electronics: An Engineering Perspective,” 8th Edition,
Butterworth-Heinemann Elsevier, 2017.
4. W. Liu, “Hybrid Electric Vehicle System Modeling and Control,” 2nd Edition, Willy, 2017.

Reference Books:
1. R. Rajamani, “Vehicle dynamics and Control,” second edition, Springer, 2012.
2. V. Pop, et.al., “Battery Management Systems,” Springer, 2008
3. A. Emadi, M. Ehsani, and J.M. Miller, “Vehicular Electric Power Systems: Land, Sea and Aerial
Vehicles,” Marcel Dekker, Inc, New York, Basel, 2004.
4. T.J.E. Miller, “Brushless permanent-magnet and reluctance motor Drives”, Clarendon Press,
Oxford 1989.
5. N. Mohan, T.M. Undeland, and W.P. Robbins, “Power Electronics: Converters, Applications, and
Design”, 2nd edition, John Wiley & Sons.
6. Special issue, “State of Art Electric Vehicle Technologies,” Proceedings of IEEE, vol. 95, no. 4,
Sept 2007.
7. Z.Q.Zhu and D.Howe, “Electrical machines and drives for electric, hybrid, and fuel cell vehicles”,
Proceedings of the IEEE, vol.95, no.4, pp.746-765, April 2007.
8. S. Kumar and H.P. Ikkurti, “Power Electronic Interface for Energy Management in Battery
Ultracapacitor Hybrid Energy Storage System,” Jour. Elec. Power Comp. and Sys., vol. 41, no. 11,
pp. 1059-1074, Aug. 2013.

101
EEL421: POWER QUALITY
3 Credits (3-0-0)

Course Objectives:
 To study the aspects of power quality problems.
 Study of power quality effect in distribution system

Course Outcomes
Students are able to:-
1. Understand the different power quality indices.
2. Interpret the ill effects of all power quality problems in distribution system.
3. Solve wiring and grounding problems.
4. Analyze harmonics and filters in distribution system.
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H H M M - - M - - -
CO2 H H H H H M - - M - H L
CO3 H H H M L M L - M - H M
CO4 H H H H M M L - M - M M

Course Contents:

Introduction to Power Quality, PQ Standards, Terms, Definitions.

Voltage Sag and Interruptions, Its Sources, Types, Characteristics, Behavior of Different Electric
Equipment’s, Concept of Area of Vulnerability.
Voltage Swell And Transient Over voltages, Sources of Over voltages Like Capacitor Switching, Load
Switching, Lightening Etc. Problems Due To Over Voltages, Computer Tools For Transient Analysis.
Harmonics Distortions, Voltage And Current Harmonics, THD, Sources Of Other Harmonics, Its Ill
Effects, Inter-harmonics, Harmonic Filters, Other PQ Problems Like EMI, Noise, Notching, Flicker, DC
Offset.
Typical Wiring and Grounding Problem Causing Poor Power Quality, Solutions to Wiring and
Grounding Problem.
Need of Measuring and Monitoring of PQ Problems, Location of Monitoring Equipment’s. Different
types of PQ Measuring Equipment.

102
Text Books:

1. Roger C. Dugan, “Electrical power system quality” Second Edition,2012,McGrawHill.

2. Alexander Kusko, “Power quality in electrical systems”, First Edition,2009,McGrawHill.

Reference Books:
1. Ewald Fusch, “Power quality in power system and electrical machines”, Academic press.
2. H.J. Math, Understanding power quality problems: voltage sags and interruptions by IEEE press.

103
EEL415: NON LINEAR DYNAMICAL SYSTEMS
3 Credits (3-0-0)

Pre-requisites: - EEL305
Course Objectives:
 Students should be acquainted with the basic concepts of analysis of nonlinear systems
 The concept of bifurcations and chaos in dynamical systems must be understood
Course Outcomes:
1. Understanding the basics of Nonlinear dynamical systems
2. Understanding the concept of bifurcations and chaos
3. Understanding mathematical theorems in nonlinear systems
4. Learning one parameter bifurcation in continuous and discrete systems

Mapping with POs (Refer PO’s given on page numbers 6 and 7):
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L L L H L L H L H H
CO2 H H H H L M L L L L H H
CO3 H M H M L H L M M M M M
CO4 H M L L M M M M L M L H

Course Contents:

Continuous dynamical systems, Equilibrium points. Linearization. Hartman-Grobman theorem. Linear

stability analysis. Liapunov Theorem and global stability. Stable, unstable and central manifolds:
Stable and central manifold theorems.
Limit cycles: Existence and uniqueness of limit cycle. Poincare-Bendixson theorem.
Bifurcations: Saddle-node, transcritical, pitchfork (supercritical and subcritical), Hopf-Andronov
(Supercritical and subcritical), Homoclinic, Heteroclinic bifurcations, Border Collision Bifurcations.
Strange attractors and Chaos: Lorentz system, Lienard systems, Henon map, Rossler system and food
chain model. Constructing phase bifurcation diagrams. Cascades of periodic doubling bifurcation.
Lyapunov exponents.

Text Books:
1. “Elements of Applied Bifurcation Theory” by Kuznetsov, Springer; 3rd edition, 2004
2. “Introduction to Applied Nonlinear Dynamical Systems and Chaos” by Wiggins, Springer; 2nd

104
 edition, 2003

Reference Books:
1. “Nonlinear Systems: Analysis, Stability, and Control” by Shankar Shastri Springer; 1999
2. “Nonlinear Systems, Hassan Khalil, 3rd Edition, Prentice-Hall, Pearson; 3rd edition, 2001

105
EEL 435: SPECIAL ELECTRICAL MACHINES

Credits (3-0-0)

Course Objectives:
 Understanding the principle and operation of special mac3ine
 Understanding various issues in special mac3ines
 Know the possibility of t3eir applications

Course Outcomes:
Students are able to
1. Understand theory, construction and design of special motors
2. Do the mathematical modeling of special mac3ines
3. Realize the application of these machines in various engineering application

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO3 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO30 PO33 PO32
CO1 3 L L L M L M - - L L L
CO2 3 3 L L 3 L L - - M L L
CO3 3 3 L L M L L - - M M M

Course Contents:
Permanent Magnet Brushless D.C. Motors [6 Lectures] Fundamental equations – EMF and Torque
equations – Torque speed c3aracteristics – Rotor position sensing – Sensorless motors – Motion control-
Application

Stepping Motors [6 Lectures] Features – fundamental equations – PM stepping motors – Reluctance

stepping motors – 3ybrid stepping motors – Torque and voltage equations – c3aracteristics-Application

Permanent Magnet Synchronous Motors [8 Lectures] Construction - Principle of operation – EMF and
torque equations – Starting – Rotor configurations – Dynamic model-Application
Switc3ed Reluctance Motors [8 Lectures] Constructional features – principle of operation – torque
production – c3aracteristics – power controllers-Application

Synchronous Reluctance Motors [8 Lectures] Constructional features – axial and radial flux motors –
operating principle – c3aracteristics- Application

Emerging Machines in Electrical Engineering [4 Lectures]: Introduction, and application- Application

Text Books:
1 Venkataratnam K., Special Electrical Mac3ines, CRC Press, 2009.
2 Miller, T. J. E., Brus3less Permanent Magnet and Reluctance Motor Drives, Oxford Science
Publications, 3989

106
 3 Kenjo, T., Sugawara A., Stepping Motors and t3eir Microprocessor Controls, Oxford Science
Publications, 3984
4 R. Kris3nan, “Switc3ed Reluctance Motor Drives: Modeling, Simulation, Analysis, Design, and
Applications” CRC Press, 2037
5 E. G. Janardanan, Special Electrical Mac3ines, P3I Learning Pvt. Ltd, 2034

Reference Books:

1 Krishnan, R., “Permanent Magnet and BLDC Motor Drives”, CRC Press, 2009.
2 Chang-liang, X., "Permanent Magnet Brus3less DC Motor Drives and Controls", Jun 2032.
3 James Weis3eng Jiang, Ali Emadi , “Switc3ed Reluctance Motor Drives Fundamentals to
Applications” CRC Press, 2039

107
EEL 436: INTRODUCTION TO ROBOTICS
Credits (3-0-0)
Course Objectives:

 To provide knowledge on the various robotic systems with the help of mathematical models.
 To introduce the control aspects of robotic manipulator.
 To learn the concepts of application of robotics.

Course Outcomes:

The Students will be able to

1. Describe the characteristics of a robotic system from its dynamic model.

2. Analyse the model of robotic systems with the help of theorems.
3. Illustrate the various task space control schemes available.
4. Discuss about the various application aspect of robotics system.

Mapping with POs (Departmental reference):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M L L M L L - - - L L
CO2 M H L L M L M - - - L M
CO3 H M L L M M M - M L M L
CO4 H M M M H H H - L - H M

Course Contents:
Simple manipulators: Two/three arm manipulators and their kinematics equations, Work space
Homogeneous Transformation: Rotation, Translation and Composition of homogeneous transformations.

Danavit-Hartimber algorithm: D-H procedure for fixing joint coordinate frames, Robot parameters, Arm
matrix.

Differential transformation and velocity of a frame: Derivative of a frame, Velocity, Jacobian, Inverse
Jacobian. Trajectory Planning: Polynomial trajectory, Biped trajectory.

Dynamics: Lagrangian method, Robot dynamics equation.

Control: Robot dynamics equation as a control system, Trajectory tracking control, End-effector control,
path planning control, PID controller, Robust control design.

Robotic Exoskeletons:- Introduction, Applications. Introduction to robust control of exoskeleton for

rehabilitation purposes.

Application-Industry & Medical: Robust force control of a two finger exoskeleton during grasping.

Robot assisted needling system for percutaneous intervention-an Introduction, Smart robotic needles for
percutaneous cancerous Interventions.

108
Text Books:

1. Industrial Robotics-Technology, Programming and Application, M.P. Groover, et, al., Mc.Graw
Hill Book Co. 2008.
2. Robot Manipulators: Mathematics, Programming and Control, Richard Paul, MIT Press, 1981

Reference Books:

1. Intelligent Systems and Control, Laxmidhar Behera and Indrani Kar, Oxford University Press,
2009.
2. Fundamentals of Robotics, Robert Shilling, Prentice-Hall, 2003
3. Robots and manufacturing Automation, C. Ray Asfahl, John Wiley and Sons New York, 1992.
4. Robotics and Control: Theory and Practice, N. Sukavanan, M. Felix Orlando, NPTEL Course,
2021.

109
 EIGHTH SEMESTER
EED402: PROJECT PHASE II
4 Credits (0-0-4)
Pre-requisites: - EED401
Course Objectives:
 To inculcate culture of handling all aspects of solution of a practical problem
 To develop ability to work in group with peers
 To understand, formulate and analyze the problem resulting into a novel solution
Course Contents:
Find solution to the problems in areas of electrical and electronics engineering as proposed by faculty
members in earlier phase and present seminars and submission of project report based on the work done

110
EEL416: RENEWABLE ENERGY SYSTEMS
3 Credits (3-0-0)

Course Objectives:
 To learn the principles of generating Heat Energy and Electrical energy from Non-conventional
Renewable Energy Sources.
 To gain understanding of the working of Off-grid and Grid-connected Renewable Energy
Generation Schemes.

Course Outcomes:
Students are able to
1. To understand the characteristics of the renewable energy sources
2. To calculate the energy available in the source
3. To understand the technique and problems to trap the renewable energy source
4. To understand the storage devices
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H M L H M - H M M -
CO2 H H H M L M M - H M M -
CO3 M H M M L M M - H L L -
CO4 H M M M L L L - M L M -

Course Contents:
Non-Conventional Sources of Electrical Energy – Solar, Wind, Geo-Thermal, Ocean, Tidal, Wave,
Their Scope and Potentialities for Energy Conversion

Solar Energy – Introduction, Physical Principles of Conversion of Solar Radiation into Heat, Solar
Energy Collectors, Solar Energy Storage,

Solar Photovoltaic power generation: Physics of solar cells, Characteristic of solar cell, series and
parallel connection, types of solar cell, module manufacturing, partial shading, bypass and blocking diode,
standalone PV system, and grid connected PV system.

111
 Biomass: Introduction to biomass, Biomass conversion technologies, wet process and dry process,
Biogas generation, classification of biogas plants continuous & batch types, The dome and the drum types,
selection of site for biogas plant, bio-diesel, ethanol, municipal solid and liquid waste and its treatments.

Wind Energy – Introduction, Basic Principle Of Wind Energy Conversion, Wind Data And Energy
Estimation, Site Selection, Basic Component Of Wind Energy Conversion System, Wind Turbines And
Their Analysis, Wind-Electrical Generation. Stand-Alone and Grid Connected Wind-Electrical Power
System, Various Applications of Wind Energy.

Tidal Energy- Introduction, Basic Principles of Tidal Power, Site Selection, Storage, Single and Double
Effect Tidal Schemes, Analysis of Tidal Energy Plant

Ocean Energy- Introduction to Wave Energy Based Power Plants, Advantages and Disadvantages,
Analysis of Wave Energy Plant

Energy storage integrated with renewable energy: Fuel cell, characteristics, types, hydrogen generation and
storage, battery storage, solar pond, thermal energy storage

Text Book:
1. Rao and Parulekar, Energy Technology, Khanna Publishers, New Delhi, Second reprint 2002
2. G.D Rai, Non-conventional Energy Sources, Khanna Publishers, New Delhi, tenth reprint 2002
3. C. S. Solanki, “Solar Photovoltaics Fundamentals, Technologies and Applications”, PHI, 2011
4. B. H. Khan, “Non-conventional Energy Resources”, Tata Mc Graw hill Publishing Co. Ltd.,
2006

Reference Books:
1. S.P. Sukhatme, J.K. Nayak, “Solar Energy-Principals of Thermal Collection and Storage,”,
Tata Mc Graw hill Publishing Co. Ltd., New Delhi 2008
2. NPTEL video lectures
3. Thomas Ackermann, “Wind Power in Power System”, John Willey &Sons, 2005.
4. J. Twidell and T. Weir, “Renewable Energy Resources”, E & F N Spon Ltd, London, 1999
5. Daniel, Hunt V, "Wind Power - A Handbook of WECS", Van Nostrend Co., New York, 1981.
5. Gary
6. L. Johnson, "Wind Energy Systems", Prentice Hall Inc., 1985.

112
EEP416: RENEWABLE ENERGY SYSTEMS LAB
1 Credit (0-0-2)
Course outcomes:
Students will be able to
1. Understand characteristic of solar module
2. Plot wind turbine characteristics
3. Understand power flow calculation of PV and Wind systems

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M M M M M M H H M L H
CO2
H H M M M M M M H M L H
CO3 H H L M M M M H H M L M

List of experiments:
1. To demonstrate I-V and P-V characteristics of series and parallel combination of module.
2. To determine the effect of partial shading on PV module output power.
3. To measure overall I-V characteristics of two solar cells connected in series and parallel.
4. To show the effect of variation in tilt angle on PV module power.
5. Observe power flow calculations for standalone PV system with combined DC load and battery.
6. To obtain power flow calculations for standalone PV system with combined AC load and battery.
7. To calculate tip speed ratio of wind turbine at different wind speeds.
8. To draw the turbine power v/s wind speed curve.

113
EEL426: CONDITION MONITORING OF ELECTRIC COMPONENTS
3 Credits (3-0-0)

Course Objectives:

 Necessity and importance of and reliability.

 Idea about conventional and recent techniques.
 Development of algorithms and software packages.
Course Outcomes:
Students should be able to
1. Understand the necessity of condition monitoring and reliability.
2. Have knowledge about the conventional and modern methodologies/techniques.
3. Develop basic functional models for condition monitoring system to different kind of power
apparatus.
4. Know about application of Condition Monitoring System and determination of life expectancy of
that equipment.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M L M H H M H H H M M
CO2 M M L M M H M M M H L M
CO3 M L L M L M L L L M L M
CO4 L L L L L M L L L L L M

Course Contents:
Basic definitions, terminologies, symbolic representation, Necessity from technical social, financial aspect,
types of faults in electrical equipments {Electrical equipments such as transformer, CT/PT and rotating
electrical machines, CBs, etc.}.
Conventional methods (Measurement of insulation resistance), Diagnostic Testing: Routine tests, type
tests, special tests (offline tests).
Recent methods (offline), Dissolved Gas Analysis (DGA), Dissipation Factor (tan δ), Sweep Frequency
Response Analysis (SFRA), Partial Discharge (PD), Time Domain Dielectric Response (TDDR),
Frequency Domain Spectroscopy (FDS), Chemical analysis. Image processing techniques.

114
Recent methods (online), vibration and temperature monitoring, sensor and data acquisition system,
Modern algorithms, GA, and signal processing techniques. Application to various equipments such as
transformer, induction motor, synchronous generator and motor, DC motor, CT and PT, case studies.
Calculation of Power Equipment Reliability for Condition-based Maintenance Decision-making, Optimum
Reliability-Centered Maintenance, and Cost Related Reliability Measures for Power System Equipment,
Reliability based replacement refurbishment/planning
Text Books:
1. P. Vas, “Parameter estimation, condition monitoring and diagnosis of electrical machines”,
Clarendon Press Oxford.
2. P. Tavner, Li Ran, J. Penman and H. Sedding, “Condition monitoring of rotating electrical
machines”, IET press

References Books:
1. Xose M Lo´pez, Ferna´ndez, H Bu¨lent Ertan, J Turowski, “Transformers analysis, design, and
measurement”, CRC Press.
2. M.J. Heathcote, “The J & P Transformer Book”, Newnes Publication.
3. S.V. Kulkarni and S.A. Khaparde, “Transformer Engineering: Design, Technology and
Diagnostics”, CRC Press.
4. R. Billinton and R. N. Allan, “Reliability Evaluation of Power Systems, 2nd ed. New York”, NY,
USA: Plenum, 1996.

1. Video: Transformer condition evaluation with ABBs Mature Transformer Management Program
2. Induction motor condition monitoring with ABBs, Siemens, General Electricals (source You Tube)

115
EEL412: DIGITAL SIGNAL PROCESSING AND ITS APPLICATIONS
3 Credits (3-0-0)

Course Objectives:

 Students should be acquainted with basic concepts of DSP and its advantages
 Applications of DSP in electrical engineering should be understood

Course Outcomes:
Students are able to:-
1. Understand DFT and DCT
2. Learn various FFT techniques
3. Learn design of digital filter
4. Understand applications of DSP in electrical engineering
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H L M L L L L M H M H
CO2 H H H H H L M L M H M H
CO3 H H H H H L M L H H M H
CO4 H H H H H L M M H H M H

Course Contents:
● Review of Fourier Transform
− Analog and Digital signals
− FT, FS, DTFT and DTFS
● Discrete Fourier Transform
− Properties
− Relation with Z and Fourier
− DCT
● FFT
− Radix 2 DIF and DIT
− Radix 4 DIF and DIT
− algorithmic complexity
● Digital Filter Design
− FIR

116
 − IIR
● Applications in PE and PS
− Numerical relay
− DSP Processors

Text Books:
1. “Digital Signal Processing: Principles, Algorithms, and Applications” by J. G. Proakis etal.,4th
edition (2006), Pearson publication.
2. “ Digital Signal Processing” by Nagoor Kani, 2nd edition (2008) McGraw Hill Publication

Reference Books:
1. “Digital Signal Processing” by Oppenheim, 3rd edtion (2012), Pearson publication.

117
EEP420: CONDITION MONITORING OF ELECTRICAL COMPONENTS LAB
1 Credits (0-0-2)
Course Outcomes:
Students are able to:
1. Know how to carry out different off line test of the Condition Monitoring of Electrical
Components
2. Know how to carry out different on line test of the Condition Monitoring of Electrical
Components.
3. Evaluate the performance of electrical components.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M H H M M M H H H H
CO2 H H L H H M M M H H H H
CO3 H H L H H M M M H H H H

List of Experiments:

1. Analysis of Frequency Response Test of Three Phase Transformers under

(i) Interturn short circuit fault and (ii) Core displacement fault conditions.
2. Determination of Percentage Impedance under
(i) No fault and (ii) Interturn short circuit fault conditions
3. Determination of Core Integrity by Magnetic Balance Test of Three Phase Transformers under
(i) No Fault and (ii) Core deformation/displacement conditions.
4. Computation of Ratio and Phasor Groups of Three Phase Transformers under
(i) Normal and (ii) Abnormal conditions.
5. Determination of Dielectric Absorption Ratio and Polarization Index of Oil Filled Transformer.
6. Online condition monitoring and assessment of health of Three Phase Transformers under
(i) Normal and (ii) Abnormal / fault conditions by Search Coil Techniques.
7. Online condition monitoring and assessment of health of Three Phase Induction Motor under
(i) Normal and (ii) Abnormal / fault conditions by Observer Coil Techniques.
8. Online condition monitoring and assessment of health of Single Phase Induction Motor under
(i) Normal and (ii) Abnormal / fault conditions by Current Loci / Wing Techniques.
9. Measurement and Monitoring of Earth Mat Resistance of 11 kV Switch Yard.
10. Study of Remote Condition Monitoring of Three Phase Oil Filled Transformer.

118
EEL431 : SMART GRID

3 Credits (3-0-0)

Course Objectives:

The students will be able to :

 Understand concept of smart grid and its advantages over conventional grid
 Know smart metering techniques
 Learn wide area measurement techniques
 Appreciate problems associated with integration of distributed generation & its solution through
smart grid .
Course Outcomes:
Student should be able to
1. Appreciate the difference between smart grid & conventional grid
2. Apply smart metering concepts to industrial and commercial installations
3. Formulate solutions in the areas of smart substations ,distributed generation and wide area
measurements
4. Come up with smart grid solutions using modern communication technologies

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H L L L M H M M M H M H
CO2 H H M M H H M H H H M H
CO3 H H H H H H H M H H H H
CO4 H M H M H H H H H H H H

Course Contents:
Introduction to Smart Grid, Evolution of Electric Grid, Concept of Smart Grid, Definitions, Need of Smart
Grid, Concept of Robust & Self-Healing Grid, Present development & International policies in Smart Grid.
Introduction to Smart Meters, Real Time Prizing, Smart Appliances, Automatic Meter Reading (AMR),
Outage Management System (OMS), Plug in Hybrid Electric Vehicles (PHEV), Vehicle to Grid, Smart
Sensors, Home & Building Automation
Smart Substations, Substation Automation, Feeder Automation. Geographic Information System (GIS),
Intelligent Electronic Devices (IED) & their application for monitoring & protection, Smart storage like
Battery, SMES, Pumped Hydro, Compressed Air Energy Storage, Wide Area Measurement System
(WAMS), Phase Measurement Unit (PMU).
119
Micro grids and Distributed Energy Resources: Concept of micro grid, need & applications of micro grid,
formation of micro grid, Issues of interconnection, protection & control of micro grid. Plastic & Organic
solar cells, thin film solar cells, Variable speed wind generators, fuel cells, micro turbines, Captive power
plants, Integration of renewable energy sources.
Power Quality Management in Smart Grid: Power Quality & EMC in Smart Grid, Power Quality issues of
Grid connected Renewable Energy Sources, Power Quality Conditioners for Smart Grid, Web based Power
Quality monitoring, Power Quality Audit.
Information and Communication Technology for Smart Grid: Advanced Metering Infrastructure (AMI),
Home Area Network (HAN), Neighborhood Area Network (NAN), Wide Area Network (WAN).
Bluetooth, ZigBee, GPS, Wi-Fi, Wi-Max based communication, Wireless Mesh Network, Basics of
CLOUD Computing & Cyber Security for Smart Grid. Broadband over Power line (BPL). IP based
protocols.
Text Books:
1. Ali Keyhani, “Design of smart power grid renewable energy systems”, Wiley IEEE,2011
2. Clark W. Gellings, “The Smart Grid: Enabling Energy Efficiency and Demand Response”, CRC Press,
2009
3. Janaka Ekanayake, Nick Jenkins, Kithsiri Liyanage, “Smart Grid: Technology and Applications”, Wiley
2012
4. Jean Claude Sabonnadière, Nouredine Hadjsaïd, “Smart Grids”, Wiley ISTE 2012
Reference books
1. James Momoh, “Smart Grid Fundamentals of Design and Analysis,” Wiley, 2012
2. A. Keyhani, “Smart Power Grid Renewable Energy Systems,” Wiley 2011

120
EEL 419 ELECTRIC VEHICLE SUBSYSTEM MODELING (DE and OC)
(3 - Credit: 2-0-2 Hours)

Course objectives :
 To develop the skill sets of the identification of the different components of an electric vehicle
 Modeling, simulation and performance evaluation of an electric vehicle subsystems.

Course outcomes:
After the completion of the course students will be able to

1. Understand the need of an electric vehicle, components of the subsystems and dynamics.
2. Understand and use the control strategies for vehicle control, battery management and the
required communication link.
3. Model the batteries, motor and other auxiliary loads and integration for component-wise and
system level performance.
4. Analyses the use pattern and dependency on the charging infrastructure.

Mapping of COs with POs

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 3 2 2 - 2 - 2 1 1 3
CO2 3 2 3 2 2 - 2 - 2 1 1 3
CO3 3 2 3 2 2 - 2 - 2 1 1 2
CO4 3 2 3 3 2 - 2 - 2 1 1 3

Course Contents:

EV Technologies and Integration Aspects:

Content: Need of Electrical Vehicles; Traction Motors; Batteries; Regeneration; Power Electronics;
Vehicle systems & dynamics
Interactive sessions: Electric Vehicle Sub-systems identification; Electric Vehicle Sub-Systems
disassembly; Electric Vehicle Sub-Systems Characterization Electric Vehicle Sub-Systems
reassembly; Electric Vehicle Sub-Systems mapping; Electric Vehicle System mapping
Energy Management & Control:
Content: Basics of control systems; Types of control strategies; Battery Management System;
Vehicle Controllers; System Functional Safety.
Interactive sessions: Controller Hardware Identification – Sensors, Actuators, ECU, Wiring
Harness, Connectors, etc.; Communicating with ECU – CAN and OBD, data logging, calibration
interfaces, etc.
System Modeling & Simulation:
Content: System modeling techniques; Physics based modeling; Data based modeling; RCA &
FMEA; 1-D Simulations Setup.
Interactive session: modeling of motors & batteries; modeling of vehicle & accessory loads;
modeling of driver and operating conditions; Model integration and first simulation.
Customer Usage Patterns (Individual & Fleet):

121
 Content: Legacy ICE vehicles users; First time EV buyers; Mapping customer expectations; Data
collection & analysis
Interactive session: Data Collection on electric vehicle using loggers; Data analysis for driver
behavior; Data analysis for operating conditions; Data analysis for durability and other validation.

Infrastructure Dependencies:
Content: Charging & grid liability; Charging protocols & safety; Telematics & connected vehicles;
Renewable energy.
Delivery of the Course: Course will be delivered by the Faculty Members of Electrical, Mechanical
Electronics Department and Industry partners.
Mode of evaluation:
Sessional exams, end semester exam, assignment and mini-project.
Related Experiments to be carried out by the students:

SN List of Experiment COs

1.Characterization of Electric Vehicle Sub-Systems CO-1

2. Controller Hardware Identification – Sensors, Actuators, ECU, Wiring Harness, CO-2

Connectors, etc.; Communicating with ECU – CAN and OBD, data logging, calibration
interfaces, etc
3. Modeling of motors & batteries; modeling of vehicle & accessory loads; modeling of driver CO-3
and operating conditions; Model integration and first simulation
4. Data Collection on electric vehicle using loggers; Data analysis for driver behaviour; Data CO-4
analysis for operating conditions; Data analysis for durability and other validation
5. Charging protocols & safety; Telematics & connected vehicles CO-2,
3, 4

Text Book:
1. Iqbal Husain, “Electric and Hybrid Vehicles: Design Fundamentals,” CRC Press, Taylor and
Francis, 2005.
2. M. Ehsani, Y. Gao and A. Emadi, “Modern Electric, Hybrid Electric and Fuel cell vehicles:
Fundamentals, theory and design,” second edition, CRC Press, Taylor and Francis, 2010.
3. W.B. Ribbens, “Understanding Automotive Electronics: An Engineering Perspective,” 8th Edition,
Butterworth-Heinemann Elsevier, 2017

References BOOK:
1. R. Rajamani, “Vehicle dynamics and Control,” second edition, Springer, 2012.
2. V. Pop, et.al., “Battery Management Systems,” Springer, 2008
3. N. Mohan, T.M. Undeland, and W.P. Robbins, “Power Electronics: Converters, Applications, and
Design”, 2nd edition, John Wiley & Sons.
4. Special issue, “State of Art Electric Vehicle Technologies,” Proceedings of IEEE, vol. 95, no. 4,
Sept 2007.
5. Z.Q.Zhu and D.Howe, “Electrical machines and drives for electric, hybrid, and fuel cell vehicles”,
Proceedings of the IEEE, vol.95, no.4, pp.746-765, April 2007.

122
EEL437: INTERNET OF THINGS FOR ELECTRICAL ENGINEERING
3 Credits (3-0-0)

Course Objectives:
 To know about the fundamentals of Internet of Things
 To introduce the concepts of Industry 4.0
 To have hands-on with the cloud based services

Course Outcomes:
At the end of the course students are able to
1. Understand the fundamentals of IoT
2. Get familiarize with the communication protocols and technologies used in IoT
3. Apply the concepts of IoT to Electrical Engineering
4. Develop IoT platform based application in Electrical Engineering

Mapping with POs

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M L L H M L L L L L H
CO2 H M L L H M L L L L L H
CO3 H M M H H M L L M L L H
CO4 H H H H H M L H H H L H

Course Contents:
Introduction: Basics of networking – Network types, Models, Addressing, TCP/IP transport layer; Basics
of network security – Confidentiality, Cryptography, Message integrity & authenticity, internet security
and firewall; Wireless Sensor Networks (WSN), M2M Communications and Cyber Physical Systems.

Internet of Things (IoT): Emergence of IoT – Evolution, IoT Networking Components, Addressing
Strategies in IoT; IoT Sensing and Actuation – Their types and characteristics (Sensing types include
scalar, multimedia, hybrid and virtual; actuator types include hydraulic, pneumatic, electric, thermal or
magnetic, mechanical, soft and shape memory polymers); IoT Processing Topologies and types.

IoT Connectivity and Communication Technologies: IEEE 802.15.4, Zigbee, Thread, ISA100.11A,
Wireless HART, RFID, NFC, DASH7, Z-Wave, Sigfox, LoRa, NB-IoT, Wi-Fi, Bluetooth, etc.;
Communication Protocols – Infrastructure, Discovery, Data, Identification and Semantic.

Industrial Internet of Things (IIoT): Introduction, Definition of Industry-4.0, IoT and IIoT Similarities
and Differences, Industry Environments and Scenarios Covered by IIoT; Understanding Industrial Process
and Devices.

Smart Grid and Vehicular IoT: Wide spectrum of applications of IoT in Electrical Engineering, Smart
Cities, Smart Factories, Components of Vehicular IoT, Advantages and Crime Assistance in smart
Transportation; Case Studies.

123
Implementation: Implementing a Cloud Industrial IoT Solution with AWS, Google Cloud, Azure, etc. for
specific electrical applications like converter operated light, fan, and motor-pump, so on.

Text Books:
1. Sudip Misra, Anandarup Mukherjee, and Ajijit Roy “Introduction to IoT”, Cambridge University
Press, Cambridge, United Kingdom, 2021.
2. Giacomo Veneri and Antonio Capasso, “Hands-on Industrial Internet of Things”, Packt Publishing
Ltd., Birmingham, United Kingdom, 2018.

Reference Books:
1. Alasdair Gilchrist, “Industry 4.0 – The Industrial Internet of Things” Apress, Thailand, 2016.
2. Dong-Seong Kim, Hoa Tran-Dang, “Industrial Sensors and Controls in Communication Networks”,
Springer Nature Switzerland AG, 2019.
3. https://onlinecourses.nptel.ac.in/noc19_cs65/preview.

124
EEL433: FLEXIBLE AC TRANSMISSION SYSTEMS
3 Credits (3-0-0)
Pre-requisites: - EEL226

Course Objectives:
 To understand the problems and constraints related to the operation of large interconnected power
system
 Application of FACTS controller to improve the performance of the power system

Course Outcomes:
Students are able to: -
1. Understand the concept of power flow in power system
2. Understand and analyse the operation of various FACTS devices.
3. Understand FACTS devices for overcoming transmission bottlenecks.
4. Simulation of different FACTS devices to analyze their effects.

Mapping with POs (Refer PO’s given on page numbers 6 and 7):
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H M M M M L M M M M M H
CO2 H H M H H M M M H M H M
CO3 H H H H H M H M M M H M
CO4 H H H H M M M M M M M M

Course Contents:

Transmission Interconnection, Flow of power in the AC system, factors affecting loading capability, power
flow and dynamic stability consideration of a Transmission interconnection

Flexible AC Transmission Systems (FACTS): Basic Realities & Roles, Types of FACTS Controller,
Principles of Series and Shunt Compensation. Introduction to Voltage source and Current source converter.

Shunt compensation (SVC): Objectives of shunt compensation, Midpoint voltage regulation for long
transmission line, voltage instability prevention, improvement of transient stability, Methods of
controllable VAR generation, Description of Static VAR Compensators (SVC), Variable impedance type
VAR generators. Thyristor controlled reactor (TCR), Thyristor Switched Capacitor (TSC), TSC-TCR,
Fixed capacitor TCR (FC-TCR).

Shunt compensation (STATCOM): Switching type VAR generator, Static Synchronous Compensator
(STATCOM), Basic operating principle, Configuration. Basic control approach, Comparison between SVC
and STATCOM.

Series Compensator: Objectives of series compensation, improvement of transient stability, Variable

impedance type series compensator, Thyristor Switches Series Capacitor (TSSC), Thyristor Controlled
Series Compensators (TCSC).

125
Switching Converter type Series Compensator, Synchronous Series Compensator (SSSC) and Controller
for SSSC.

Text Books:
1. N.G. Hingorani, “Understanding of FACTs”, Third Edition,2011,IEEpress.
2. T.E. Acha, “Power Electronics Control in Electrical Systems”, New NES (Elsevier)
Publication,2006.

Reference Books:
1. Thyristor Based FACTS Controllers for Electrical Transmission System, R.M. Mathur, and R.
K.Verma, Wiley, 2011
2. FACTS: Controller in Power Transmission & Distribution, K. R. Padiyar, New Age International
Pvt Ltd; 2nd edition, 2016
3. HVDC and F ACTS controllers, Application of Static converter in Power System, V.K. Sood
New Age International, Springer, 2013
4. Recent publications on IEEE Journals.

126
EEP433: FLEXIBLE AC TRANSMISSION SYSTEMS LAB
1 Credit (0-0-2)
Course outcomes:
Students will be able to
1. Familiarizing with basic MATLAB coding, simulation and measurement
2. To study and analyze the operation of different P-δ and Q- δ curves with respect to
compensation
3. Simulate and analyze FACTs devices such as SVC, STATCOM, SSSC etc
4. Present the findings in the area of flexible AC transmission

Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H H M H M M L M L M M
CO2 H H H H H L L L L L M M
CO3 H H H H M M L L L L L L
CO4 H H H H M M M L M L M M

List of experiments:
1. Familiarization with PSCAD/EMTDC, power world simulator software.
2. Understanding of Reactive Power and Power Factor Correction in AC Circuits
3. To study the effect of real and reactive powers on bus voltages
4. Modeling of Thyristor Converters.
5. Modeling of Thyristor Controlled Reactors (TCR).
6. Modeling of Thyristor Controlled Series Capacitors (TCSC) .
7. Modeling of Static Shunt compensator (STATCOM).
8. Modeling of Static Synchronous Series compensator (SSSC).

127
EEL434 : COMPUTER METHODS IN POWER SYSTEMS

3 Credits (3-0-0)

Course Objectives:

The students will learn

 Representation of power systems using Graph Theory

 Power System Network Matrices
 Methods of Load Flow Studies
 Computer simulation of Short Circuit Studies
 Computer simulation of transient stability Studies of multi-machine Power Systems
Course Outcomes:
Student will be able to:-
1. Represent power system network using graph theory
2. Calculate Bus voltages and line flows using load flow methods
3. Calculate short circuit currents, line currents and bus voltages for unbalanced and balanced shunt
and series faults
4. Calculate bus voltage magnitudes & angles and evaluate the stability of multimachine power
system
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 M H M L H - L - L L - M
CO2 M H M L H - L - L L - M
CO3 M H L L M L M M M M L M
CO4 H H L H M H H M H M H H

Course Contents:
Graph Theory Definitions, formation of Bus Incidence Matrix, Y Bus formation by Direct and Singular
Transformation Methods
Formation of Z Bus Matrix using method of addition of branch and link, Sparse Matrix representation
methods
Power Flow Studies: Necessity of Power flow studies, derivation of Static Load Flow Equation, Load Flow
Solution using Gauss-Siedel Method (Without & with PV Buses), Acceleration factor, Newton-Raphson

128
Method in rectangular and polar coordinates, Derivation of Jacobian elements, decoupled and fast
decoupled load flow method, comparison of different methods, DC load flow

Short Circuit Analysis: Analysis of balanced and unbalanced shunt faults with and without fault
impedance, Open conductor faults, and simultaneous faults
Modeling of Power system components for transient stability studies, Simulation of transient stability
studies for multimachine power systems

Text Books
1. A.R. Bergen & Vijay Vittal, “Power System Analysis” Pearson; 2nd edition, 1999
2. M.A. Pai, “Computer Techniques in Power System Analysis”, TMH, 3rd edition, 2017

Reference Books
1. Hadi Saddat, “Power System Analysis”, McGraw-Hill Inc.US; Subsequent edition, 1998
2. J.D. Glover & M.S. Sharma, “Power System Analysis & Design”, Cengage Learning India Private
Limited., 5th edition, 2012
3. Grainger & Stevenson, “Power System Analysis”, McGraw Hill Education; 1st edition, 2017
4. M. Pavella & Murthy, “Transient Stability of Power System :Theory & Practice”, Wiley 1994
5. K.R. Padiyar, “Power System Dynamics, Stabilty & Control ”, Anshan Ltd; 1st edition, 2004

129
EEP434: COMPUTER METHODS IN POWER SYSTEMS LAB
1 Credit (0-0-2)
Course outcomes:
Students will be able to
1. Simulate various control systems using Simulink and MATLAB
2. Simulate basic circuits using PSPICE
3. Model SMIB and multi machine system and evaluate transient stability of the system
Mapping with POs (Refer PO’s given on page numbers 6 and 7):

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 H H M L M L L L M L L M
CO2 H H M L M L L L M L L M
CO3 H H M L M L L L M L L M

List of Experiments:
1. Formation of YBUS using incidence matrix from system data
2. Comparison of receiving end voltage varying line length and using Short, medium and long line
models
3. Calculation of Bus voltages using Gauss-Siedel Method
4. Calculation of Jacobian and Bus voltages using NR method
5. Study of power flow using MiPower Software
6. Short-circuit studies using MiPower Software
7. Transient stability simulation for single machine and multi-machine system using Simulink
8. Designing PID controller for second order system

130
 Open Course

EEL417: ENERGY CONSERVATION AND AUDIT

3 Credits (3-0-0)

Course Objectives:
Students are going to learn -
1. Industrial utilization of primary and secondary energy sources.
2. Different energy conversion processes.
3. Energy auditing procedure.

Course Outcomes:
Students are able to
1. Appreciate importance of energy conservation.
2. Understand the scope of energy conservation in thermal utilities.
3. Grasp the importance of energy assessment.
4. Comprehend various energy auditing methodologies.

Course Contents:
Unit 1: Energy Conservation- Energy Scenario Overview
Unit 2: Basics of Energy and Its Various Forms, Global Environmental Concerns
Unit 3: Energy Efficiency in Thermal Utilities- Fuels and Combustion, Boiler, Fluidized Bed Combustion
(FBC) Boilers, Cogeneration
Unit 4: Energy Efficiency In Electrical Utilities- Electric System, Electric Motors, Fans And Blowers,
Pump And Pumping System, Cooling Tower, Lighting System, Energy Efficient Technologies In
Electrical System
Unit 5: Energy Assessment- Energy Performance Assessment for Thermal Utilities and Electrical Utilities
Unit 6: Energy Audit- Energy Management and Audit, Material and Energy Balance, Energy Action
Planning, Financial Management, Project Management, Case studies based on Energy Conservation and
Audit reports,
Introduction to Data Analysis and Blockchain Techniques in Energy Conservation

Text/ Reference Books:

1. Giovanni and Petrecca, Industrial Energy Management: Principles and Applications, The Kluwer
International Series-207, 1999
2. H.E. Jordan, Energy Efficient Electric Motors and their Applications, Plenum Pub. Corp, 2nd
edition, 1994
3. Albert, Plant Engineers and Managers Guide to Energy Conservation, Fairmont Press, 10th edition,
2011
4. Albert thumann, Handbook of Energy Audits, Fairmont press, 5th edition, 1998
5. W.C. Turner, Energy Management Handbook, John Wiley and Sons, 1982
6. Guide books available at www.beeindia.in , 2015
7. https://www.pwc.com/gx/en/industries/assets/blockchain-technology-in-energy.pdf

131
EEL 419 ELECTRIC VEHICLE SUBSYSTEM MODELING (OC)
(3 - Credit: 2-0-2 Hours)
Course Objectives:
 To develop the skill sets of the identification of the different components of an electric vehicle
 Modeling, simulation and performance evaluation of an electric vehicle subsystems.

Course outcomes:
After the completion of the course students will be able to

1. Understand the need of an electric vehicle, components of the subsystems and dynamics.
2. Understand and use the control strategies for vehicle control, battery management and the
required communication link.
3. Model the batteries, motor and other auxiliary loads and integration for component-wise and
system level performance.
4. Analyses the use pattern and dependency on the charging infrastructure.

Mapping of COs with POs

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 3 2 2 - 2 - 2 1 1 3
CO2 3 2 3 2 2 - 2 - 2 1 1 3
CO3 3 2 3 2 2 - 2 - 2 1 1 2
CO4 3 2 3 3 2 - 2 - 2 1 1 3

Course Contents:
EV Technologies and Integration Aspects:
Content: Need of Electrical Vehicles; Traction Motors; Batteries; Regeneration; Power Electronics;
Vehicle systems & dynamics
Interactive sessions: Electric Vehicle Sub-systems identification; Electric Vehicle Sub-Systems
disassembly; Electric Vehicle Sub-Systems Characterization Electric Vehicle Sub-Systems
reassembly; Electric Vehicle Sub-Systems mapping; Electric Vehicle System mapping
Energy Management & Control:
Content: Basics of control systems; Types of control strategies; Battery Management System;
Vehicle Controllers; System Functional Safety.
Interactive sessions: Controller Hardware Identification – Sensors, Actuators, ECU, Wiring
Harness, Connectors, etc.; Communicating with ECU – CAN and OBD, data logging, calibration
interfaces, etc.
System Modeling & Simulation:
Content: System modeling techniques; Physics based modeling; Data based modeling; RCA &
FMEA; 1-D Simulations Setup.
Interactive session: modeling of motors & batteries; modeling of vehicle & accessory loads;
modeling of driver and operating conditions; Model integration and first simulation.
Customer Usage Patterns (Individual & Fleet):
Content: Legacy ICE vehicles users; First time EV buyers; Mapping customer expectations; Data
collection & analysis
Interactive session: Data Collection on electric vehicle using loggers; Data analysis for driver
behavior; Data analysis for operating conditions; Data analysis for durability and other validation.

132
Infrastructure Dependencies:
Content: Charging & grid liability; Charging protocols & safety; Telematics & connected vehicles;
Renewable energy.
Delivery of the Course: Course will be delivered by the Faculty Members of Electrical, Mechanical
Electronics Department and Industry partners.
Mode of evaluation:
Sessional exams, end semester exam, assignment and mini-project.
Related Experiments to be carried out by the students:

SN List of Experiment COs

2.Characterization of Electric Vehicle Sub-Systems CO-1

3. Controller Hardware Identification – Sensors, Actuators, ECU, Wiring Harness, CO-2

Connectors, etc.; Communicating with ECU – CAN and OBD, data logging, calibration
interfaces, etc
4. Modeling of motors & batteries; modeling of vehicle & accessory loads; modeling of driver CO-3
and operating conditions; Model integration and first simulation
5. Data Collection on electric vehicle using loggers; Data analysis for driver behaviour; Data CO-4
analysis for operating conditions; Data analysis for durability and other validation
6. Charging protocols & safety; Telematics & connected vehicles CO-2,
3, 4

Text Book:
1. Iqbal Husain, “Electric and Hybrid Vehicles: Design Fundamentals,” CRC Press, Taylor and
Francis, 2005.
2. M. Ehsani, Y. Gao and A. Emadi, “Modern Electric, Hybrid Electric and Fuel cell vehicles:
Fundamentals, theory and design,” second edition, CRC Press, Taylor and Francis, 2010.
3. W.B. Ribbens, “Understanding Automotive Electronics: An Engineering Perspective,” 8th Edition,
Butterworth-Heinemann Elsevier, 2017
4. References:
5. R. Rajamani, “Vehicle dynamics and Control,” second edition, Springer, 2012.
6. Pop, et.al., “Battery Management Systems,” Springer, 2008
7. N. Mohan, T.M. Undeland, and W.P. Robbins, “Power Electronics: Converters, Applications, and
Design”, 2nd edition, John Wiley & Sons.
8. Special issue, “State of Art Electric Vehicle Technologies,” Proceedings of IEEE, vol. 95, no. 4,
Sept 2007.
9. Z.Q.Zhu and D.Howe, “Electrical machines and drives for electric, hybrid, and fuel cell vehicles”,
Proceedings of the IEEE, vol.95, no.4, pp.746-765, April 2007.

133
EEL285-Industrial Electrical Engineering (DE for Mining)
3 Credits, Elective subject

CO of course
Students are able to
1. Describe the construction and design of cables and performances of transmission lines
2. Discuss and interpret the concept of tariffs and power factors
3. Demonstrate the design and working of switch gear, protection equipment and electrical
drives
4. Examine the correct value of the demonstrating components of the industrial electrical
engineering

Course Content:
Introduction to power system, structure of a power system
, important terminologies, performance of 1-phase short transmission lines, 3-phase short transmission
lines, effect of load pf on regulation and efficiency.
Underground cables: uses, requirement, construction of cables, Insulation materials for cables,
classification of cables, Insulation resistance of a 1-core cable, Dielectric stress in a 1-core cable, most
economical conductor size in a cable, grading of cable, types of cable faults, loop test for location of faults
in underground cables.
Distribution system; types of distribution, connection schemes, requirem, interconnection-economic
advantages, load characteristics and basic terminologies.
Tariff: objectives, types- simple, flat, block rate, maximum demand, power factor, three-part.
Power factor improvement: power triangle, disadvantages of low power factor, cause of low pf, pf
improvement, pf improvement equipment, Calculation of pf correction.
Performance of transmission lines; classification of overhead lines ent of distribution system. Distribution
of power for surface and underground mines. Sub-station: classification, equipment in substation.
Introduction to switchgear: introduction, essential features, switchgear equipment, circuit breakers;
operation, arch phenomena, arc extinction, classification, construction and working of circuit breakers, oil
CB, Air-blast, SF6 and vacuum CB. CB rating. Introduction to Indian electricity rule.
Protective relay; basic terminologies, classification of relay, working and construction of attracted
armature type relay, induction type, universal relay torque equation, IDMT, directional overcurrent,
distance or impedance relay, differential relay, reactance relay. Type of protection.
Electrical drives; introduction and block diagram, application and advantages, choice of drives,
components of drives, dynamics of drives, components of load torque, steady state stability, review of
torque-speed characteristics of DC motor, speed control, motoring and electric breaking of DC motor,
controller rectifier for DC motor, speed-torque characteristics of induction motor drives, closed-loop
control of drives, concept of multi-motor drives.

References:
1. V.K. Mehta, R. Mehta, principle of power system.
2. Soni, Gupta, Bhatmagar, A course in electrical power.
3. GK-Dubey, fundamentals-of-electric-drives.

134