Scribd
Upload
84 views5 pages

Hardware Specification For SE NX

The document outlines the hardware specifications for Solid Edge and NX software, including minimum and recommended requirements for installation. It specifies operating system compatibility, disk space, RAM, processor speed, and graphics card requirements. Additionally, it suggests a cost-effective setup using both SSD and HDD for optimal performance.

Uploaded by

cad cad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views5 pages

Hardware Specification For SE NX

The document outlines the hardware specifications for Solid Edge and NX software, including minimum and recommended requirements for installation. It specifies operating system compatibility, disk space, RAM, processor speed, and graphics card requirements. Additionally, it suggests a cost-effective setup using both SSD and HDD for optimal performance.

Uploaded by

cad cad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Company with a GLOBAL

PRESENCE

Hardware Specifications
for
Solid Edge and NX

Date: 8/24/2023
Version: Updated for SE 2023 and NX2306
Revision: C
SE
Solid Edge
Solid Edge Windows Certification ( Professional and Enterprise Editions )
Windows 7 – ST3 Latest MP through ST10 ( Some versions require first MP )
Windows 8 & 8.1 – ST6 through ST10
Windows 10 – ST7 through SE 2023
Window 11 – SE 2022
MP2 through SE 2023

Minimum Requirements SE 2023


• 9 GB of Disk Space for Installation
• 16 GB of RAM ( Low End Hardware )
• Siemens Certified Graphics Card (see spreadsheet on last page) , 65K colors (minimum)
• 1920 x 1080 or higher ( widescreen format recommended )
• 3.0 GHZ Processor
( This isn’t a listed requirement in SE release notes but it is a good reference point for
low end hardware)

Recommended
• 32 GB of Ram
• Siemens Certified Graphics Card, True Color (32-bit) or 16 million colors (24- bit)
( recommended )
• 4.0 GHZ Processor Boost Clock
( This isn’t listed in release notes but it’s what we have in training machines )
• Solid State Drive

Date: 8/24/2023
Version: Updated for SE 2023 and NX2306
Revision: C
www.prolim.com
NX
NX Windows Certification
Windows 7 – NX7 through NX11
Windows 8 & 8.1 – NX8.5 through NX11
Windows 10 - NX10.0.3 through NX2412
Windows 11 – NX 2007 through NX 2412 64 bit only

Minimum Requirements (NX 2306)


• 20 GB of Disk Space for Installation
• 8 GB of RAM ( Low End Hardware )
• Siemens Certified Graphics Card (Spreadsheet)
• 3.0 GHZ Processor
( This isn’t a listed requirement in NX release notes but it is a good reference point for
low end hardware)

High End for both SE and NX (What we run here)


•Lenovo ThinkPad P50 Mobile Workstation Laptop
• Windows 10 Professional
• 32 GB of RAM ( 64 GB on our CAM Workstations )
• Intel(R) Core(TM) i7-10750H 5.0 GHZ Boost Clock
• 1TB Solid State Drive
• NVIDIA Quadro T2000 ( This varies somewhat between machines )

Date: 8/24/2023
Version: Updated for SE 2023 and NX2306
Revision: C
www.prolim.com
P.S . Solid State Drives can be very expensive once you start looking at larger amounts
of storage space, one way to avoid the cost of a large SSD is to get a machine that runs
both a SSD and a HDD. This way you can run your Operating System (Windows) and
your CAD/CAM software off of the SSD and receive the benefits of an SSD with a
reduced cost, while still having a large amount of storage via the HDD which are much
cheaper.

www.prolim.com
PROLIM Global Corporation
1305 Mattec Drive, Cincinnati, OH 45140
(800) 631-5961 | +1 888-9-PROLIM
www.prolim.com

Stay updated with the latest news, tips, and trends


Follow us on

You might also like