Home » Computer Errors & Fix »

How to Fix “Operation could not be completed error 0x00000709” Error When Using Shared Printer?

Disclosure: We are not providing any kind of paid support. Beware of scammers. This page may contain affiliate links read

disclaimer

How to Fix “Operation could not be

completed error 0x00000709” Error When
Using Shared Printer?
By Amit / December 3, 2021

Are you trying to set a new default printer on a computer via a network and

are getting the message “Operation could not be completed error

0x00000709”? Don’t worry, this problem can be easily solved if you follow the

solution shared below. In this tutorial, we will explain how to fix “Operation

could not be completed error 0x00000709” error when using shared printer.

What Causes “Operation could not be completed

error 0x00000709”? 
While installing a printer you make some changes on your computer files,
Windows Services, registry entries and many other settings. However, these

changes can be altered when you install another printer or other printing
applications. Sometimes the permissions are changed due to malware or

conflicting programs by the Windows Firewall, which makes the printer to

stop working normally.

The “Operation could not be completed error 0x00000709” or the “Error

0x00000709” is usually caused due to the above-mentioned accidental

changes on your Windows computer. Therefore, whether you are trying to

solve this problem on a shared network printer or a directly connected printer,

the solution given below will work for all the conditions.

How to Fix “Operation could not be completed

error 0x00000709” Error When Using Shared
Printer?

When solving this error over a network computer and printer you will have to
work with at least two computers. First is the computer where the printer is

directly connected and installed and the second computer is where you are

unable to access the printer and witnessing the Error 0x00000709. In order to

solve this error, first you will have to perform all the steps on the main
computer, which is where the printer is connected and installed, then check

the error on the second computer.

Before following the steps given below make sure that the printer is
connected to the network and is working properly. The steps given below will 
work for all the versions of the Windows operating system.

1) Steps for the First Computer

Make sure that you are logged into your Windows through Administrator

account or you have Administrator privileges. This is extremely important for

the success of this solution.

1. Open Windows Explorer window, right click ‘This PC’ and choose

‘Manage’ from the options.

2. In the Computer Management window, click on the ‘Services’ option

under the ‘Services and Applications’ section.


3. In the list of Services, locate and right click ‘Computer Browser’, then

choose ‘Restart’ from the listed options. Wait for the Computer

Browser Service to restart.

4. Next, locate and right click ‘Print Spooler’ service, then select ‘Restart’

from the options. Wait for the Print Spooler Service to restart.

5. Then, locate and right click ‘Windows Firewall’ service and select

‘Restart’ from the given options. Wait for the Windows Firewall Service

to restart.


6. After restarting all the three above-mentioned services click on the

‘Close’ button at the top right side of the Computer Management

window.

7. Simultaneously, press and hold the ‘Win’ and ‘R’ keys on your

keyboard. This will open the Run dialog box. Type ‘regedit’ in the

dialog box and click on the ‘OK’ button.

8. In the Registry Editor window, expand the folder tree to locate

“HKEY_CURRENT_USER\Software\Microsoft\WindowsNT\CurrentV

ersion\Windows”. Now, right click the ‘Windows’ folder and choose

‘Permissions’ from the shown options.

9. In the Permissions, choose ‘All Applications Packages’, then ‘Allow’ 

‘Full Control’ by checking the relevant box and finally click on the
 ‘Apply’ button.

10. Next, choose ‘Administrators’ from the list, then check ‘Full Control’
box under ‘Allow‘ and finally click on the ‘Apply’ button.

11. Click on the ‘Add’ button to create a new group.

12. In the Select Users window, click on the ‘Advanced’ button. 

13. Click on the ‘Find Now’ button, then locate and select ‘Everyone’ from
the search results and click on the ‘OK’ button.

14. Check that ‘Everyone’ is listed in the object names, then click on the
‘OK’ button.

15. Now, choose ‘Everyone’ group from the list and ‘Allow’ ‘Full Control’ 

to this group. Then, click on the ‘Apply’ button to finalize the changes
 and finally the ‘OK’ to confirm all the changes.

16. Click on the ‘Start’ button, choose ‘Power’ option and select ‘Restart’
to reboot your computer.

After the computer reboots all the changes made above will take effect, thus,
now is the time to move to the network computer where you are unable to

connect with your network printer and are experiencing the Error 0x00000709.

2) Steps for the Second Computer

To properly follow the steps mentioned below you must know the IP Address

of the computer where the printer is installed. 

 1. Simultaneously, press and hold the ‘Win’ and ‘R’ keys on your

keyboard to open the Run dialog box. In the Run dialog box, type the
‘IP Address’ and click on the ‘OK’ button.

2. In the Network window, double click on the printer you want to

access.

3. When you see the message ‘Connecting to printer’ it’s a sign that the

Error 0x00000709 has been resolved.

That’s it, you have fixed the “Operation could not be completed error
0x00000709” error on a shared printer.

Now you know how to fix “Operation could not be completed error
0x00000709” error when using shared printer on a Windows computer.

However, do remember that the solution given above can be used for printers

which are accessed via network as well as the printers which are directly
connected with your computer.

Related :

1. How to Fix “Operation Could Not Be Completed (Error 0x00000bc4) No

Printers Were Found” Error When Using Shared Printer

2. How to Fix “Operation Could Not Be Completed (Error 0x00000771)”

Error When Using Shared Printer
3. How do I fix “unable to install printer. operation could not be

completed” Error
4. Fix: Operation failed with error 0x0000011B (Windows cannot connect

to the printer)
5. How to Fix SFC scan error “Windows resource protection could not

perform the requested operation”

6. How to Fix Roblox Error 272 – Lost connection due to an error code:
272 (Disconnected Error)

About The Author

Amit

2 thoughts on “How to Fix “Operation could not be completed 

error 0x00000709” Error When Using Shared Printer?”

JD
JANUARY 1, 2023 AT

Tried half a dozen “so called” fixes. NOTHING has worked. Microsoft needs to fix this. Linux is
looking better all the time.

Reply

DAN
DECEMBER 30, 2021 AT

Not working on clean install of windows 10 December 2021.

Reply

Leave a Comment
Your email address will not be published. Required fields are marked *

Type here..

Name*

Email*


 Website

Notify me via e-mail if anyone answers my comment.

Post Comment »

Latest deals

Avast up to 70% off

Norton 360 – 66% Off

McAfee 50% off

Malwarebytes 25% Sale

IObit 90% Off

Avira Prime – 40% Off

iolo System Mechanic 50% off

Trend Micro 50% Off


 Kaspersky 70% off

Panda Global Protection – 50% off

Disclaimer: Any brand name, trademark, Image used on this website are for reference only. We disclaim any
ownership, right of such third party products or copyrighted material. We are not responsible for any data loss /
business loss, device corruption or any other type of loss due to the use of any software or command mentioned
anywhere on the website. Please Read Terms of use and Privacy Policy before using this website.
Copyright © 2023 techsupportall.com (Free Tech help)

Home Privacy Policy Terms of use Contact us