List of DOS commands

From Wikipedia, the free encyclopedia

Jump to: navigation, search

Wikibooks has a book on the topic of
Guide to Windows Commands

Contents
[hide]
 1 Commands
o 1.1 assign
o 1.2 append
o 1.3 attrib
o 1.4 call
o 1.5 cd or chdir
o 1.6 chcp
o 1.7 chkdsk
o 1.8 choice
o 1.9 cls
o 1.10 copy
o 1.11 defrag
o 1.12 del or erase
o 1.13 deltree
o 1.14 dir
o 1.15 echo
o 1.16 exe2bin
o 1.17 exit
o 1.18 fc or comp
o 1.19 fdisk
o 1.20 find
o 1.21 format
o 1.22 help
o 1.23 intersvr & interlnk
o 1.24 join
o 1.25 label
o 1.26 loadfix
o 1.27 md or mkdir
o 1.28 mem
o 1.29 memmaker
o 1.30 mode
o 1.31 more
 o 1.32 move
o 1.33 msd
o 1.34 pause
o 1.35 pcpark
o 1.36 print
o 1.37 rd or rmdir
o 1.38 rem
o 1.39 ren
o 1.40 scandisk
o 1.41 set
o 1.42 share
o 1.43 sort
o 1.44 subst
o 1.45 sys
o 1.46 time and date
o 1.47 tree
o 1.48 truename
o 1.49 type
o 1.50 undelete
o 1.51 ver
o 1.52 verify
o 1.53 xcopy
 2 See also
 3 References

 4 External links

A partial list of the most common commands for DOS follows. In versions 5 of DOS and
later, the user can get help by typing HELP at the shell prompt. To get help on a DOS
command, the command switch /? can be used. For example, to get help for the xcopy
command, type the following at the DOS prompt:

xcopy /?

The operating system will execute the command and the /? parameter display a help page
about itself, in this case xcopy. To view this help page, see the xcopy entry on this page.

In the list below, when a command can accept more than one filename, or a filename
including wildcards (* and ?), it is said to accept a filespec parameter. Commands that
can accept only a single filename are said to accept a filename parameter.

For most of the commands, the Unix equivalent is given. It should be noted that Unix
commands typically provide ranges of functionality and flexibility that are not
approached by the equivalent DOS command, so all comparisons are approximate. For
example, the DOS commands copy and xcopy are said to be equivalent to the Unix cp
command, but in reality cp has much greater power than copy, and a similar functionality
to xcopy.

While many commands are the same across many DOS systems (MS-DOS, PC-DOS,
DR-DOS, FreeDOS, etc.) some differ in command syntax or name.

[edit] Commands
[edit] assign

The command redirects requests for disk operations on one drive to a different drive.

assign [x[:]=y[:][...]]
assign /STATUS

Options:

 x The drive letter to reassign.

 y The drive letter that x: will be assigned to.
 /STATUS Displays the current drive assignments.

If typed without parameters then all drive letters are reset to original assignments.
The command is available in MS-DOS 5.00.

[edit] append

(External)

Display or sets the search path for data files. DOS will search the specified path(s) if the
file is not found in the current path. This had some creative uses, such as allowing non-
CD based games to be run from the CD, with configuration/save files stored on the HD.

append;
append [d:]path[;][d:]path[...]
append [/X:on|off][/E]

[edit] attrib

Change or view the attributes of one or more files. It defaults to displaying the
attributes of all files in the current directory.

Options:

 To add an attribute attach a '+' in front of it.

  To remove an attribute attach a '-' in front of it
 Attributes include
o R - Read-only
o A - Archive
o S - System
o H - Hidden

attrib [+|-ahrs] [filespec]

Directory Attrib Functions: It is also possible to use ATTRIB across directories.

[drive:][path][filename]
Specifies a file or files for attrib to process.

o /D - Process folders as well.
o /S - Process matching files in the current folder and all subfolders.

Roughly equivalent to the Unix commands chattr and lsattr.

[edit] call

Calls one batch program from another. A new batch file context is created with
the specified arguments and control is passed to the statement after the label
specified.

Syntax:

call [filespec][batch file parameters]

 filespec: name and if necessary path of the new batch file
 parameters: switches

[edit] cd or chdir

Change current directory. Displays the current working directory when used
without a path parameter.
cd

displays the current working directory on the current drive.

cd f:

displays the current working directory on F:.

cd directory

changes the working directory on the current drive to directory.

chdir e:directory

changes the working directory on E: to directory.

cd ..

changes the working directory to the parent directory (up one directory level).

cd \

changes the working directory to the root (top level) directory of the current drive.

Equivalent to the Unix command cd (with a path parameter), or pwd (without a

parameter). cd .. changes to the parent directory.

[edit] chcp

Changes the code page used to display character glyphs in a console window.
chcp [codepage]

With a numeric parameter, this command changes the codepage setting to codepage.
Without a parameter, the command displays the currently active codepage.

[edit] chkdsk

Verifies a hard disk or a floppy disk for file system integrity.

Options:

 /F :
 /P : Forces a full disk verification
 /R : Searches for defective sectors and recovers legible information (applies /F)

chkdsk drive [[path]filename] [/F] [/V]

Equivalent to the Unix command fsck

[edit] choice

Allows for batch files to prompt the user to select one item from a set of single-
character choices.
Introduced in MS-DOS 6;[1] DR-DOS 7.03.[2]

[edit] cls

Clears the screen.

cls
Equivalent to the Unix clear.
[edit] copy

Copies files from one location to another. The destination defaults to the current
directory. If multiple source files are indicated, the destination must be a
directory, or an error will result.
copy filespec [destination]
Files may be copied to devices. For example, copy file lpt1 sends the file to
the printer on LPT1. copy file con outputs file to the screen ("console"), which
can also be done using type file. Devices themselves may be copied: copy con
file takes the text typed into the console and puts it into file, stopping when EOF
(Ctrl+Z) is typed.
Files may be concatenated using +. For example, copy file1+file2 file_cat
will concatenate the files and output them as file_cat. There are two switches to
modify the command's behaviour, /a (text mode, the default) and /b (binary
mode). In text mode, copy will stop when it reaches the EOF character; in binary
mode, the files will be concatenated in their entirety, ignoring EOF characters.
Examples:
copy /a alpha.txt + beta.txt gamma.txt
copy /b alpha.mpg + beta.mpg gamma.mpg
Equivalent Unix commands are cp (for copying) and cat (for concatenation).
Device files may be copied in Unix as well, e.g. cp file /dev/tty will display
a file on the screen (but cat file is more commonly used here).
Equivalent RT-11/RSX-11/OpenVMS command is copy.

[edit] defrag

(in MS/PC-DOS; diskopt in DR-DOS)

Defragments a disk drive.

Options:
 -A – Analyses the fragmentation of a disk drive
 -F – Force defragmentation even if disk space is low
 -V – Verbose output mode

Example of usage:
defrag driveletter: -a -v
No Unix equivalent.

[edit] del or erase

del filename
erase filename
Equivalent to the Unix command rm.
Equivalent in RT-11/RSX-11/OpenVMS operating systems line is delete
command which can be contracted to del.
[edit] deltree

Deletes a directory along with all of the files and subdirectories that it contains.
Normally, it will ask for confirmation of such a drastic action.
deltree [/y] directory

The /y parameter, if present, tells the deltree command to carry out without first
prompting for confirmation.

The deltree command is not included in recent Microsoft Windows operating systems.
Deleting a non-empty directory in those versions of Windows where the command is not
included, can be achieved by using the rmdir command as in the following example:

rmdir /s [/q] directory

In Unix, the functionality of deltree is provided by the rm command with the parameter
-r (or -rf for the /y switch).

[edit] dir

Lists the contents of a directory.

The dir command typed by itself, displays the disk's volume label and serial number; one
directory or filename per line, including the filename extension, the file size in bytes, and
the date and time the file was last modified; and the total number of files listed, their
cumulative size, and the free space (in bytes) remaining on the disk. The command is one
of the few commands that exist from the first versions of DOS.

dir [drive:][path][filename] [parameters]

Most commonly used parameters of dir include:

 /W : Displays the listing in wide format, with as many as five filenames or

directory names on each line.
 /P : Pause at every page
 /S : Also look in subdirectories
 /Axx: Display files with the specified attributes only
 /Oxx: Modifies sort order
 /B : Uses bare format (no heading information or summary)
 > [drive:][path][filename] : To Store Result in a text file;(c:\dir > c:\
fileList.txt)

Possible attributes for the A parameter are D (directories), R (read-only files), H (hidden
files), A (files/directories with the archive bit on), and S (system files). The prefix -
negates an attribute; attributes can be combined (e.g. /A:DA means directories with the
archive bit on).
Possible sort orders are N (name), S (size), E (extension), D (date and time), A (last access
date), and G (group directories first). The prefix - reverses the order.

Other less commonly used parameters of dir include:

 /D : Display wide format but sorted by column

 /L : Display forced into lowercase
 /N : Display forced into long file name format instead of 8.3
 /Q : Displays the owner of each file
 /X : Display shows 8.3 names next to long file names

The default parameters of dir can be set using the DIRCMD environment variable.

Equivalent to the Unix command ls (the option -l is "long" list format, it works the
opposite way from /w.)

Equivalent in RT-11/RSX-11/OpenVMS operating systems line is directory command

which can be contracted to dir.

[edit] echo

Prints its own arguments back out to the DOS equivalent of the standard output
stream. Usually, this means directly to the screen, but the output of echo can be
redirected like any other command. Often used in batch files to print text out to
the user.
echo this is text Outputs 'this is text'
echo. Outputs a blank line
Another important use of the echo command is to toggle echoing of commands on
and off in batch files.
echo on turns on echoing of commands
echo off turns off echoing of commands
Traditionally batch files begin with the @echo off statement. This says to the
interpreter that echoing of commands should be off during the whole execution of
the batch file thus resulting in a "tidier" output. The @ symbol declares that this
particular command (echo off) should also be executed without echo. For example
the following 2 batch files are equivalent:
Batch1.bat:
@echo off
echo The files in your root directory:
dir /b /a-d c:\
Batch2.bat:
@echo The files in your root directory:
@dir /b /a-d c:\
Echo can be used to write to files directly from the console, by redirecting the
output stream:
echo text > filename
Echo can also be used to append to files directly from the console, again by
redirecting the output stream:
echo text >> filename
To type more than one line from the console into a file, use copy con (above).
Equivalent to the Unix command echo.

[edit] exe2bin

Converts an executable (.exe) file into a binary file with the extension .com,
which is a memory image of the program.
The size of the resident code and data sections combined in the input .exe file
must be less than 64KB. The file must also have no stack segment.

[edit] exit

Exits the current command processor. If the exit is used at the primary command,
it has no effect unless in a DOS window under Microsoft Windows, in which case
the window is closed and the user returns to the desktop.
EXIT
Exit also exists in Unix-shells. If an exit command is used in the primary
command shell under Unix, however, it will logoff the user, similar to the control-
D keystroke.

[edit] fc or comp

Compares two files or sets of files and displays the differences between them.
FC [/A] [/C] [/L] [/LBn] [/N] [/T] [/W] [/nnnn] [drive1:]
[path1]filename1 [drive2:][path2]filename2
FC /B [drive1:][path1]filename1 [drive2:][path2]filename2
/A Displays only first and last lines for each set of differences.
/B Performs a binary comparison.
/C Disregards the case of letters.
/L Compares files as ASCII text.
/LBn Sets the maximum consecutive mismatches to the specified number
of lines.
/N Displays the line numbers on an ASCII comparison.
/T Does not expand tabs to spaces.
/W Compresses white space (tabs and spaces) for comparison.
/nnnn Specifies the number of consecutive lines that must match after
a mismatch.
[drive1:][path1]filename1 Specifies the first file or set of files
to compare.
[drive2:][path2]filename2 Specifies the second file or set of files
to compare.[citation needed]
Equivalent to the Unix commands comm, cmp and diff.

[edit] fdisk

Manipulates hard disk partition tables. The name derives from IBM's habit of
calling hard drives fixed disks. When run from the command line, it displays a
menu of various partitioning operations:
 1. Create DOS partition or Logical DOS Drive
2. Set active partition
3. Delete partition or Logical DOS Drive
4. Display partition information
5. Change current fixed disk drive (only available if the computer has
more than one hard drive)
FDISK /MBR installs a standard master boot record on the hard drive.
FDISK /MBR #: where # is other partition on system. Completes above command
on indicated partition.
eg: "C:\FDISK /MBR D:" would install boot record on
D:\ partition.
Fdisk exists under Unix with the same name, but it is an entirely different
program. However they share purposes.

[edit] find

A filter to find lines in the input data stream that contain or don't contain a
specified string and send these to the output data stream.
Find may also be used as a pipe.
find "keyword" < ''inputfilename'' > ''outputfilename''

Searches for a text string in a file or files.

FIND [/V] [/C] [/N] [/I] "string" [[drive:][path]filename[ ...]]

/V Displays all lines NOT containing the specified string.

/C Displays only the count of lines containing the string.
/N Displays line numbers with the displayed lines.
/I Ignores the case of characters when searching for the
string.
"string" Specifies the text string to find.
[drive:][path]filename Specifies a file or files to search.

If a pathname is not specified, FIND searches the text typed at the

prompt
or piped from another command.
Equivalent to the Unix command grep. The Unix command find performs an
entirely different function.

[edit] format

Delete all the files on the disk and reformat it for MS-DOS
In most cases, this should only be used on floppy drives or other removable
media. This command can potentially erase everything on a computer's hard disk.
/autotest and /backup are undocumented features. Both will format the drive
without a confirmation prompt.
format [options] drive
FORMAT drive: [/V[:label]] [/Q] [/F:size] [/B | /S] [/C]
FORMAT drive: [/V[:label]] [/Q] [/T:tracks /N:sectors] [/B | /S] [/C]
FORMAT drive: [/V[:label]] [/Q] [/1] [/4] [/B | /S] [/C]
FORMAT drive: [/Q] [/1] [/4] [/8] [/B | /S] [/C]
/V[:label] Specifies the volume label.
 /Q Performs a quick format.
/F:size Specifies the size of the floppy disk to format (such
as 160, 180, 320, 360, 720, 1.2, 1.44, 2.88).
/B Allocates space on the formatted disk for system files.
/S Copies system files to the formatted disk.
/T:tracks Specifies the number of tracks per disk side.
/N:sectors Specifies the number of sectors per track.
/1 Formats a single side of a floppy disk.
/4 Formats a 5.25-inch 360K floppy disk in a high-density
drive.
/8 Formats eight sectors per track.
/C Tests clusters that are currently marked "bad."

Known as a joke among UNIX users of that time since every user on the machine could
easily cause damage with just one command. Therefore, it was known in the UNIX
community as "The big DOS timesaver".

There is also an undocumented /u parameter for "unconditional" that will write

strings of zeros on every sector.
Equivalent to the Unix command mkfs.
Equivalent in RT-11/RSX-11/OpenVMS operating systems line is format
command which can not create filesystem. After formatting one should use
initialize (contracted to init) command to create filesystem (Equivalent to
MS-DOS command format /q or "quick format").

[edit] help

Gives help about DOS.

MS-DOS
help 'command' would give help on a specific command. By itself, it lists the
contents of DOSHELP.HLP. Help for a specific command invokes the command
with the /? option. In MS-DOS 6.x this command exists as FASTHELP.
MS-DOS 6.xx help command uses QBASIC to view a quickhelp HELP.HLP file,
which contains more extensive information on the commands, with some
hyperlinking etc. The MS-DOS 6.22 help system is included on Windows 9x
cdrom versions as well.
PC-DOS
PC-DOS 7.xx help uses view.exe to open OS/2 style .INF files (cmdref.inf,
dosrexx.inf and doserror.inf), opening these to the appropriate pages.
DR-DOS
In DR-DOS, help is a batch file that launches DR-DOS' online reference,
dosbook.
Microsoft Windows
Windows NT, all versions, uses DOS 5 style help, but versions before VISTA
have also a Windows help file (NTCMDS.HLP or NTCMDS.INF) in a similar
style to MS-DOS 6.
FreeDOS
 FreeDOS uses an HTML help system, which views HTML help files on a
specified path. The path is stored in HELPPATH environment variable, if not
specified, default path is \HELP on the drive which HELP is placed.
Partially equivalent to the Unix command man.

[edit] intersvr & interlnk

(in MS-DOS; filelink in DR-DOS)

Network PCs using a null modem cable or LapLink cable. The server-side version
of InterLnk, it also immobilizes the machine it's running on as it is an active app
(As opposed to a TSR) which must be running for any transfer to take place. DR-
DOS' filelink is executed on both the client and server.
New in MS-DOS 6.[3]
No direct Unix equivalent, though some Unices offer the ability to network
computers with TCP/IP through null modem or Laplink cables using PLIP or
SLIP.

[edit] join

Attaches a drive letter to a specified directory on another drive.[3]

JOIN d: [d:\path]
JOIN [/D] (removes drive assignment)
If JOIN a: c:\floppy were executed, c:\floppy would display the contents of
the a: drive. The opposite can be achieved via the subst command.

[edit] label

Changes the label on a logical drive, such as a hard disk partition or a floppy disk.
In Unix and Unix-like systems, this differs from filesystem to filesystem.
e2label can be used for ext2 partitions.

[edit] loadfix

Loads a program above the first 64K of memory, and runs the program.
loadfix [drive:][path]filename
Included only in MS/PC-DOS. DR-DOS used memmax, which opened or closed
lower, upper, and video memory access, to block the lower 64K of memory.[4]

[edit] md or mkdir

Makes a new directory. The parent of the directory specified will be created if it
does not already exist.
md directory
Equivalent to the Unix command mkdir.
[edit] mem

Displays memory usage.

mem

o /CLASSIFY or /C - Lists the size of programs, provides a summary of
memory in use and lists largest memory block available.
o /DEBUG or /D - Displays status of programs, internal drivers, and other
information.
o /PROGRAM or /P Displays status of programs currently loaded in
memory.

Equivalent to the Unix command free.

[edit] memmaker

Starting from version 6, MS-DOS included the external program MemMaker

which was used to free system memory (especially Conventional memory) by
automatically reconfiguring the AUTOEXEC.BAT and CONFIG.SYS files. This
was usually done by moving TSR Programs to the Upper memory. The whole
process required three system restarts. Before the first restart the user was asked
whether he wanted to enable EMS Memory or not.
The use of MemMaker was popular among gamers who wanted to enable or
disable Expanded memory in order to run a game which required EMS or not.
Better results could be achieved by an experienced user manually configuring the
startup files to achieve greater free memory yield.

Options:

 /BATCH Runs MemMaker in batch (unattended) mode. In batch mode,

MemMaker takes the default action at all prompts.
 /UNDO Instructs MemMaker to undo its most recent changes.

PC-DOS uses another program RamBoost to optimize memory, either the

HIMEM/EMM386 or a third-party memory manager.

[edit] mode

Configures system devices. Changes graphics modes, adjusts keyboard settings,

prepares code pages, and sets up port redirection.[5]

[edit] more

Pages through the output so that you can view more than one screen of text.
command | more
Equivalent to the Unix commands more and less.
 More may also be used as a filter.
more < inputfilename

[edit] move

Moves files or renames directories.

move filename newname
move driveletter:\olddir driveletter:\newdir
Example: move c:\old c:\new
Equivalent to the Unix command mv. DR-DOS used a separate command for
renaming directories, rendir.

[edit] msd

Main article: Microsoft Diagnostics

Provides detailed technical information about the computer's hardware and
software.
msd
New in MS-DOS 6;[6] the PC-DOS version of this command is QCONFIG.[citation
needed]

No Unix equivalent, however in GNU/Linux similar type of information may be

obtained from various text files in /proc directory.

[edit] pause

Suspends processing of a batch program and displays the message 'Press any key
to continue. . .'.

[edit] pcpark

Parks the hard disk heads in order to enable safe shutdown; only used on early
versions.
pcpark
No Unix equivalent.
MS-DOS 3.2 (and possibly others) used the command HHSET

[edit] print

Adds a file in the print queue.

Options:

 /D device : Specifies the name of the print devices. Default value is LPT1
 /P filename : Add files in the print queue
 /T : Removes all files from the print queue
 /C filename : Removes a file from the print queue
This command was introduced in MS-DOS version 2. Before that there was no built-in
support for background printing files. The user would usually use the copy command to
copy files to LPT1.

Equivalent to the Unix command lpr

[edit] rd or rmdir

Remove a directory, which by default must be empty of files for the command to
succeed (the /s flag removes this restriction).
rd directory
Equivalent to the Unix command rmdir.

[edit] rem

Remark statement, normally used within a batch file. An alternative way not to
run a specific statement in a batch file is creating a label that will never be used,
::.
On the command line, rem can also be used to create a zero length file by
redirecting an empty remark statement to a filename.
rem > newfilename
In Unix, the # sign can be used to start a comment; the zero-length file can be
achieved using various methods, such as the touch command or dd.

[edit] ren

Renames a file. Unlike the move command, this command cannot be used to
rename subdirectories, or rename files across drives.
ren filename newname
You can rename files in another directory by using the PATH parameter:
ren [path]|[filename] [newfilename]
An example could be:
ren c:\Windows filex.txt filey.txt
On DOS with long filename support, care must be taken when directories have
spaces in their names like "Documents and Settings". In these cases double-quotes
are used to enclose them:
ren c:\"Documents and Settings"\"All Users"\Desktop filex.txt filey.txt
Mass renames can be accomplished by the use of wildcards. For example, the
following command will change the extension of all files in the current directory
which currently have the extension htm to html:
ren *.htm *.html
In Unix, this functionality of a simple move is provided by the mv command,
while batch renames can be done using the rename command.

[edit] scandisk
 Disk diagnostic utility. Scandisk was a replacement for the chkdsk utility, starting
with later versions of MS-DOS. Its primary advantages over chkdsk is that it is
more reliable and has the ability to run a surface scan which finds and marks bad
clusters on the disk. chkdsk had surface scan and bad cluster detection
functionality included, and was used again on Windows NT based operating
systems.
Equivalent to the Unix command fsck.

[edit] set

Sets environmental variables. See Environment variable.

Since Windows 2000 it can be even used for command line inputs by using
Parameter /P
set /p choice=Type your text.
echo You typed: "%choice%"

[edit] share

Installs support for file sharing and locking capabilities.

share [/F:space] [/L:locks]

/F:space Allocates file space (in bytes) for file-sharing information.

/L:locks Sets the number of files that can be locked at one time.

[edit] sort

A filter to sort lines in the input data stream and send them to the output data
stream.
sort < inputfilename > outputfilename
Equivalent to the Unix command sort.

[edit] subst

A utility to map a subdirectory to a drive letter.[3]

subst <d:> <path>
subst <d:> /D (Deletes the substitute drive)
If SUBST e: c:\edrive were executed, a new drive letter e: would be created,
showing the contents of c:\edrive. The opposite can be achieved via the join
command.

[edit] sys

A utility to make a volume bootable.

[edit] time and date

Display and set the time and date

time
date
When these commands are called from the command line or a batch file, they will
display the time or date and wait for the user to type a new time or date and press
RETURN. The command 'time /t' will bypass asking the user to reset the time.
The Unix command date displays both the time and date, but does not allow the
normal users to change either. Users with superuser privileges may use date -s
<new-date-time> to change the time and date.
The Unix command time performs a different function.

[edit] tree

Shows the directory tree of the current directory

Options:
/F (Displays the names of the files in each folder.)
/A (Use ASCII instead of the extended characters.)
/? (Shows the help)
tree [options] [directory]

[edit] truename
truename
or
truename drivename
or
truename filename
or
truename pathname
If typed without a parameter then the current active drive pathname is displayed.
If typed with a parameter then the command outputs the entire path (full directory
and filename) of the path or filename. For example, if the working drive and
directory were C:\PROGRAMS and one typed truename fish<HARDDRIVE>, the
output would be C:\PROGRAMS\FISH. This command also displays the UNC
pathnames of mapped network or local CD drives.
This command is an undocumented DOS command. The help switch "/?" defines
it as a "Reserved command name". It is available in MS-DOS 5.00.
This command is similar to the Unix which command, which, given an executable
found in $PATH, would give a full path and name. The C library function
realpath performs this function.

[edit] type

Display a file. The more command is frequently used in conjunction with this
command, e.g. type long-text-file | more.
type filename
Equivalent to the Unix command cat.
[edit] undelete

Restores file previously deleted with del. By default all recoverable files in the
working directory are restored. The options are used to change this behavior. If
the MS-DOS mirror TSR program is used, then deletion tracking files are
created and can be used by undelete.

Options:

 /list : lists the files that can be undeleted.

 /all : Recovers all deleted files without prompting. Uses a number sign for missing
first character.
 /dos : Recover only MS-DOS aware files, ignore deletion tracking file.
 /dt : Recover only deletion tracking file aware files.

undelete [filespec] [/list|/all][/dos|/dt]

In Unix and Unix-like systems this differs from filesystem to filesystem. People
who use the ext2 filesystem can try the command e2undel.

[edit] ver

Shows the version of MS-DOS you are using.

Some versions of MS-DOS support an undocumented /r switch, which will show
the revision as well as the version.
ver [/r]
Roughly equivalent to the Unix command uname.

[edit] verify

Enables or disables the feature to determine if files have been correctly written to
disk.
If no parameter is provided, the command will display the current setting.[7]
verify [on|off]

[edit] xcopy

Copy entire directory trees.

xcopy directory [destination-directory]
Equivalent to the Unix command cp when used with -r parameter.

[edit] See also

 Command Line Interface
 Disk Operating System
 List of Unix programs
[edit] References
1. ^ http://www.computerhope.com/choicehl.htm
2. ^ http://www.drdos.com/dosdoc/usergeng/07ugch7.htm
3. ^ a b c EasyDOS Command Index
4. ^ DR DOS 6.0 User Guide. Digital Research. 1991.
5. ^ http://www.computerhope.com/modehlp.htm
6. ^ http://www.computerhope.com/msdhlp.htm
7. ^ http://www.csulb.edu/~murdock/verify.html

[edit] External links

 The MS-DOS 6 Technical Reference on TechNet contains the official Microsoft
MS-DOS 6 command reference documention.
 DR-DOS 7.03 online manual

There are several guides to DOS commands available that are licenced under the GNU
Free Documentation License:

 The FreeDOS Spec at SourceForge is a plaintext specification, written in 1999,

for how DOS commands should work in FreeDOS
 MS-DOS commands
 A Collection of Undocumented and Obscure Features in Various MS-DOS
Versions