Scribd
Upload
19 views4 pages

VLSI Design - Digital System

Very-large-scale integration (VLSI) is the process of creating integrated circuits by combining thousands of transistors into a single chip, significantly enhancing functionality and applications in various fields. The VLSI design flow involves several stages, including specifications, behavioral description, RTL description, and physical layout, all supported by EDA tools. The Gajski-Kuhn Y-chart model helps in understanding the design process through three domains, emphasizing the importance of design hierarchy and the 'Divide and Conquer' principle.

Uploaded by

Sharath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views4 pages

VLSI Design - Digital System

Very-large-scale integration (VLSI) is the process of creating integrated circuits by combining thousands of transistors into a single chip, significantly enhancing functionality and applications in various fields. The VLSI design flow involves several stages, including specifications, behavioral description, RTL description, and physical layout, all supported by EDA tools. The Gajski-Kuhn Y-chart model helps in understanding the design process through three domains, emphasizing the importance of design hierarchy and the 'Divide and Conquer' principle.

Uploaded by

Sharath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

VLSI Design - Digital System

Very-large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining
thousands of transistors into a single chip. VLSI began in the 1970s when complex semiconductor and
communication technologies were being developed. The microprocessor is a VLSI device.

Before the introduction of VLSI technology, most ICs had a limited set of functions they could perform. An
electronic circuit might consist of a CPU, ROM, RAM and other glue logic. VLSI lets IC designers add all of
these into one chip.

The electronics industry has achieved a phenomenal growth over the last few decades, mainly due to the
rapid advances in large scale integration technologies and system design applications. With the advent of
very large scale integration (VLSI) designs, the number of applications of integrated circuits (ICs) in high-
performance computing, controls, telecommunications, image and video processing, and consumer electronics
has been rising at a very fast pace.

The current cutting-edge technologies such as high resolution and low bit-rate video and cellular
communications provide the end-users a marvelous amount of applications, processing power and
portability. This trend is expected to grow rapidly, with very important implications on VLSI design and
systems design.

VLSI Design Flow


The VLSI IC circuits design flow is shown in the figure below. The various levels of design are numbered and
the blocks show processes in the design flow.

Specifications comes first, they describe abstractly, the functionality, interface, and the architecture of the
digital IC circuit to be designed.
Behavioral description is then created to analyze the design in terms of functionality, performance,
compliance to given standards, and other specifications.

RTL description is done using HDLs. This RTL description is simulated to test functionality. From here
onwards we need the help of EDA tools.

RTL description is then converted to a gate-level netlist using logic synthesis tools. A gatelevel netlist is a
description of the circuit in terms of gates and connections between them, which are made in such a way
that they meet the timing, power and area specifications.

Finally, a physical layout is made, which will be verified and then sent to fabrication.

Y Chart
The Gajski-Kuhn Y-chart is a model, which captures the considerations in designing semiconductor devices.

The three domains of the Gajski-Kuhn Y-chart are on radial axes. Each of the domains can be divided into
levels of abstraction, using concentric rings.

At the top level (outer ring), we consider the architecture of the chip; at the lower levels (inner rings), we
successively refine the design into finer detailed implementation −

Creating a structural description from a behavioral one is achieved through the processes of high-level
synthesis or logical synthesis.

Creating a physical description from a structural one is achieved through layout synthesis.
Explore our latest online courses and learn new skills at your own pace. Enroll and become a certified
expert to boost your career.

Design Hierarchy-Structural
The design hierarchy involves the principle of "Divide and Conquer." It is nothing but dividing the task into
smaller tasks until it reaches to its simplest level. This process is most suitable because the last evolution
of design has become so simple that its manufacturing becomes easier.

We can design the given task into the design flow process's domain (Behavioral, Structural, and
Geometrical). To understand this, let’s take an example of designing a 16-bit adder, as shown in the figure
below.
Here, the whole chip of 16 bit adder is divided into four modules of 4-bit adders. Further, dividing the 4-
bit adder into 1-bit adder or half adder. 1 bit addition is the simplest designing process and its internal
circuit is also easy to fabricate on the chip. Now, connecting all the last four adders, we can design a 4-bit
adder and moving on, we can design a 16-bit adder.

You might also like