9*10W LED PAR WATERPROOF

USER MANUAL

MHL-281B

Please read and keep this manual carefully for further use!

Thank you for buying our professional Beam moving head.

1
This user manual includes important information for installation and operation, so please read this
user manual carefully before installation and operation, and keep this user manual well for further
use.
In order to install , operate, and maintain the lighting safety and correctly. We suggest that the
installation and operation should be done by the verified technician and follow the instruction strictly.

Spare part includes:

Name QTY Unit
Fixture 1 PC
User manual 1 PC
Power cable 1 PC
DMX cable 1 PCS
Handle 1 PC

Please check carefully that there is no damage caused by transportation. Should there be any,
consult your local dealer.

Cautions
Before delivery, this device has passed strict inspection, Please follow the user manual
strictly for operation, if this fixture is damaged by improper operation and mistake, the
fixture will be out of warranty, and manufacture or dealer won’t be responsible for it. In case
of any technology change in this manual,we won’t advise in further .

CAUTION!
Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

Warning!
Silkscreen symbol on
Damages lightby the disregard of this user manual are not subject to
caused
warranty. The dealer will not accept liability for any resulting defects or
problems.

Installation

2
► This fixture is not suitable for direct installation on combustible material surface, please keep the
fixture surface at least 0.5m from any combustible material.

► If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners
turned in the quick lock holes correctly.
►The applicable temperature for the fixture is between -25°C to 45°C. Do not use the lighting under
or above this temperature range.
►The truss for hanging the fixture should be able to hold 10 times weight of this fixture and no
deformation after 1 hour hang.
►Please don’t stand under the fixture when install, uninstall, move or repair the fixture.
►Please ensure the light is connected correctly and invite professional technician to check and
confirm the electrical data before installation.
►Please invite professional technician to check the fixture and installation each year.

Rigging：

Insert the quick-lock fasteners of the first holder into the respective holes on the bottom of the
device.Tighten the quick-lock fasteners fully clockwise.
Fix the clamp on truss or other fixture bracket.
Pull the safety rope through the holes on the bottom of the base and fasten it on the truss or other
fixing point.
Note:This step is quite important to ensure that fixture will not drop down for the clamp damage.

Product specification

Voltage：100-240V，50/60HZ；
Power Consumption：120W；
LED: 9*10W RGBWA-UV 6in1 LED
Average lifespan: 50,000 hours
LED adopts static constant current driving mode, with high constant current precision; the light source
can be dimmed individually, with 256-level brightness, no flicker;
DMX Channel: 10/6 CH
Control mode: DMX512/Master-slave/Auto/Sound/ panel menu control
New optical design and high brightness of glass lens
3
Strobe:1-23HZ or random strobe
Electrical dimming：0%~100%
DMX Connector: 3-pin XLR input/output
Working temperature: -10º~45º

Display and operation

Key button Function

MENU Function selection
UP parameter increase
DOWN parameter decrease
ENTER Save, confirm

Setting:

A001-A512 10CH mode Refer to the 10CH table

d001-d512 6CH mode Refer to the 6CH tablel

CJ01-DJ16 Jump change

CF01-CF16 Gradient change

CC01-CC16 Pulse change

SOUD Sound control

CL01-CL32 Color Selection Refer to the Color Selection table

R000-R255 Red brightness

G000-G255 Green brightness

B000-B255 Blue brightness

4
 W000-W255 White brightness

P000-P255 Purple brightness

o000-o255 Orange brightness

10 DMX channel
10CH Function Value Description
1 Dimming 0-255 Dimming 0-100%
2 Red 0-255 Red 0-100%
3 Green 0-255 Green 0-100%
4 Blue 0-255 Blue 0-100%
5 White 0-255 White 0-100%
6 Purple 0-255 Purple 0-100%
7 Orange 0-255 Orange 0-100%
8 Strobe 0-255 Strobe from slow to fast
0-49 No effect
50-99 Jump change
9 Macro 100-149 Gradient change
150-199 Pulse change
200-255 Sound control
10 Speed 0-255 Macro speed: slow to fast

6 DMX channel

6CH Function Value Description

1 Red 0-255 Red 0-100%
2 Green 0-255 Green 0-100%
3 Blue 0-255 Blue 0-100%
4 White 0-255 White 0-100%
5 Purple 0-255 Purple 0-100%
6 Orange 0-255 Orange 0-100%

5
Color Selection Table
CL1 R
CL2 G

CL3 B

CL4 W

CL5 P

CL6 O

CL7 RG

CL8 GB

CL9 RB

CL10 RGB

CL11 RW
CL12 GW

CL13 BW

CL14 RGW

CL15 GBW

CL16 RBW

CL17 RGBW

CL18 RP
CL19 GP

CL20 BP

CL21 RGP

CL22 GBP

CL23 RBP

CL24 RGBWP

CL25 RO
CL26 GO

CL27 BO

CL28 RGO

CL29 GBO

CL30 RBO

6
 CL31 RGBO

CL32 RGBWPO

DMX-512 connection
Connect the provided XLR cable to the male 3-pin XLR output of your controller and the other side
to the female 3-pin XLR input of the light.then connect the DMX signal to the first fixture to the 2nd
fixture, after all fixtures are connected,
The signal cable should be two - core with screened cable with XLR input and output connectors.
Please refer to the diagram below

DMX terminator connection

If there are many lines or lights, it is recommended to use a DMX terminator to prevent DMX signal
corruption, the DMX terminator is an simple XLR plug with a 120 Ω resistor connected between pins
2 and 3,which is then plugged into the output XLR socket of the last fixture in the chain.

3-Pins connection

Cleaning and maintenance

Cleaning should be performed every 15-day period, by using a sponge which is dipped with
alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.

CAUTION
Cut off power before cleaning and maintenance!
7
Attention

Do not see directly light source when open the light, and make sure power off before do any
installation or maintenance.

CAUTION
Wires connection must be done professional person!

Cautions
Before delivery, this device has passed strict inspection, Please follow the user manual strictly for
operation, if this fixture is damaged by improper operation and mistake, the fixture will be out of
warranty, and manufacture or dealer won’t be responsible for it. In case of any technology change
in this manual,we won’t advise in further .

Warranty Card
This product is made of high-brightness transistor. We will provide 1 year warranty
under the condition that user has operated the light normally and lifetime service.
We won't provide warranty if the damage is caused by artificial or force majeure
event. Cost of fittings should be charged by user if product need maintenance after
1 year .Please cut this warranty card and shipped it along with the product to our
factory when applying for warranty.
Product：
Purchasing date：
Code of invoice：
Warranty date: From To
User’s name： Add：
Company： Tel：