Installation Leaflet - Anybus Communicator for EtherNet/IP

DOC.ID: SCM-7061-130 Rev 1.02 - Part.no. SP0904

Anybus Communicator for EtherNet/IP

Connectors, Switches and Indicators
/(',QG 3&&RQQHFWRU3LQOD\RXW 0DOH5-
0RGXOH6WDWXV   1HWZRUN6WDWXV
/LQN   $FWLYLW\
6XEQHW6WDWXV   'HYLFH6WDWXV


(WKHU1HW&RQQHFWRU
7'
7'
5'
3RZHU&RQQHFWRU:LULQJ
7HUPLQDWLRQ
7HUPLQDWLRQ
5'
7HUPLQDWLRQ
7HUPLQDWLRQ

3&&RQQHFWRU 
*1'  
*1' 6XE1HWZRUN&RQQHFWRU 
565[ 9287 565;
Notes:
567[ 565[ 565;
567[ 56567[ Use 60/75 or 75ºC copper(CU)
wire only
1& 56567[
 3RZHU 6LJQDO*1' &DVLQJ3( The terminal tightening torque must
9'& be between 5-7 lbs-in (0,5-0,8 Nm)
 *1'

LED Indicators
Led (number) Indication Meaning
Module Status (1) Off No power applied to the module.
Solid Green The module is operating correctly.
Flashing Green Stand by, the module has not been initialized.
Flashing Red Minor fault. A minor fault has been detected.
Solid Red Major fault. A major error has been deteced, contact your supplier.
EtherNet

Flashing Green/Red Self test

Network Status (2) Off The module has no power or no IP address has been assigned.
Solid Green The module has at least one established EtherNet/IP connection.
Flashing Green There are no EtherNet/IP connections established to the module.
Flashing Red One or more of the connections in which this module is the target has timed out.
Solid Red The module has detacted that its IP address is already in use.
Flashing Green/Red Self test
Link (3) Off The module does not sense a link.
Green Module is connected to an Ethernet network
Activity (4) Flashing Green Packet is received or transmitted
Subnet Status (5) Off Power off
Flashing Green Not running
Green Running
Sub Network

Red Stopped
Device Status (6) Off Power off
Flashing red / green Configuration missing or invalid
Green Initialising
Flashing Green Configuration OK

Web: www.anybus.com HMS INDUSTRIAL NETWORKS

 Installation Leaflet - Anybus Communicator for EtherNet/IP
DOC.ID: SCM-7061-130 Rev 1.02 - Part.no. SP0904

Installation
Accessories Checklist
• Anybus Communicator for EtherNet/IP and Modbus TCP(ABC-EIP)
• Power Connector
• Anybus Communicator Resource CD, containing Configuration software, manuals, EDS file and
application notes. (Also downloadable from: www.anybus.com)
• RS232 Configuration Cable
• Sub network connector
• Fieldbus Cable and connector (Not included)

DIN Rail Installation

1 1

Snap ON Snap OFF

(Internal PE connection
to DIN rail via spring)

2 2

Installation and Startup Summary

(The following steps require a working installation of the ABC Config Tool on a PC)

1. Snap the module onto the DIN rail (See above)

2. Connect the module to the EtherNet network
3. Connect the module to the sub network
4. Connect the power cable and apply 24VDC power to the module
5. Connect the configuration cable between the module and the PC containing the ABC Config
Tool software. (Note: This cable can be removed after configuration)
6. Configure the module using the ABC Config Tool
7. Configure and start the EtherNet network

HMS INDUSTRIAL NETWORKS Web: www.anybus.com

Installation Leaflet - Anybus Communicator for EtherNet/IP
DOC.ID: SCM-7061-130 Rev 1.02 - Part.no. SP0904

Functional Overview
For in depth information about this product, please consult the Anybus Communicator User Manual.
(Available for download at HMS web site)
The Anybus Communicator for EtherNet is classified as a EtherNet slave module, i.e. it cannot orig-
inate connections on its own, but a scanner node can open a connection towards it.

PLC - memory
I/O I/O
PLC Inputs Outputs

The PLC exchange data via Actual Temp. Temp. Settings The PLC exchange data via
the fieldbus network, between its the fieldbus network, between its
internal input area and the IN area internal output area and the
in the ABC OUT area of the ABC

(WKHU1HW

$Q\EXV Internal memory buffer in ABC

&RPPXQLFDWRU IN Area OUT Area Local Data

(000h) (200h) (400h)
The data in the IN area of the The data in the OUT area of the
ABC contains data received from ABC contains output data, in this
nodes on the sub-network ActualTemp. Temp. Settings example the temperature setting
(Sent IN to the ABC from the for a temperature regulator
sub-network) (Sent OUT from the ABC to the
sub-network)

(Serial Sub-Network)

Serial Device - Temp Regulator Serial Device

Sub Network
Input register 'Set Valve Temperature'
Device
Output register 'Actual Temperature'

Web: www.anybus.com HMS INDUSTRIAL NETWORKS

 Installation Leaflet - Anybus Communicator for EtherNet/IP
DOC.ID: SCM-7061-130 Rev 1.02 - Part.no. SP0904

Technical Specification
Dimensions Operating Temperature
120mm x 75mm x 27 mm (L x W x H) +5 to +55 degrees Celsius
4.724” x 2.953” x 1.063” (L x W x H) +41 to +131 degrees Farenheit

Power Supply Non-operating Temperature

24V±10% -25 to +85 degrees Celsius
-13 to +185 degrees Farenheit
Power Consumption
Relative Humidity
Max. 280mA
Typ. 100mA 5 to 95% non-condensing.

Protective Earth UL Compliance

Internal connection to PE via DIN rail The certification has been documented by
UL in file E214107

Support
HMS Sweden HMS Germany
Email: [email protected] Email: [email protected]
Phone: +46 (0)35-17 29 25 Phone: +49 721 964 7218
Fax: +46 (0)35-17 29 09 Fax: +49 721 964 7210
Online: www.anybus.com Online: www.hms-networks.de

HMS America HMS Japan

Email: [email protected] Email: [email protected]
Phone: +1 773 404 2271 Phone: +81 45 478 5340
Fax: +1 773 404 1797 Fax: +81 45 476 0315
Online: www.anybus.com Online: www.anybus.com

Communicator Downloads
The latest manuals, configuration software, etc
are available for download at the address below:
www.anybus.com - and go to the support sec-
tion.

HMS INDUSTRIAL NETWORKS Web: www.anybus.com