Scribd
Upload
159 views2 pages

Softstartersr 33 Size

The SR33 is designed for general purpose applications and where a traditional Wye / Delta is currently used (or considered appropriate) the standard SR33 range is suitable for the majority of applications, and conforms to Trip Class 5, which means it is capable of withstanding three times Full Load Current for 5-second starts. However, there are instances where a different start profile is required, and the Stellar SR33 has four other ratings; class 10B, class 10, class 20, and class 30.

Uploaded by

junsana
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views2 pages

Softstartersr 33 Size

The SR33 is designed for general purpose applications and where a traditional Wye / Delta is currently used (or considered appropriate) the standard SR33 range is suitable for the majority of applications, and conforms to Trip Class 5, which means it is capable of withstanding three times Full Load Current for 5-second starts. However, there are instances where a different start profile is required, and the Stellar SR33 has four other ratings; class 10B, class 10, class 20, and class 30.

Uploaded by

junsana
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Stellar SR33 Series Basic Soft Starters

SR33 Soft Starter Selection


SR33 Sizing Guide
The SR33 is designed for general purpose applications and where a traditional Wye/Delta is currently used (or considered appropriate). Generally the motor will start off-load, and the time to accelerate to full speed will be in the range of a few seconds. The standard SR33 range is suitable for the majority of applications, and conforms to Trip Class 5, which means it is capable of withstanding three times Full Load Current for 5-second starts. However, there are instances where a different start profile is required. To satisfy these applications, the SR33 has four other ratings; Class 10B, Class 10, Class 20, and Class 30. These ratings correspond to IEC thermal/electronic overload trip classes, and the SR33 must be used with an overload protection device that has a rating corresponding to the Trip Class selected. When using the selection tables to select the most appropriate SR33 model, please note the following: The SR33 is not suitable for very high inertia loads, such as centrifuges or loaded crushers, with starts > 30 seconds. Do not use the Class 5 rating when there is a possibility of the motor starting with a significant load. 2-pole motors may take longer to start, so use a minimum of Trip Class 10B.

SR33 Soft Starters O/L Trip Class


Application Standard Heavy High Torque Centrifugal Pump Positive Displacement Pump (unloaded) Off-Load Conveyor Heavy conveyor Trip Start Class Time (s) Notes
5 20 20 10B 5 1219 12 1015 Suitable for Wye/Delta applications with < 5s start time, motor starts off-load Suitable for Wye/Delta with applications > 12s start time Requires more starting torque than a Wye/Delta Generally easy to start when pumping water

SR33 Selection Steps


Determine the required trip class based on the motor load and required start time. Select the applicable SR33 part number based on the required Trip Class and motor HP .

SR33 SELECTION Selection Table


Soft Starter Application Trip Class I (A) HP @ HP @ Class 5 Class 10B Class 10 Class 20 230V 460V 10 starts/hr 5 starts/hr SR33-22 SR33-29 SR33-29 SR33-29 22 7.5 15 SR33-29 SR33-41 SR33-41 SR33-41 29 10 20 SR33-41 SR33-55 SR33-55 SR33-66 41 10 30 SR33-55 SR33-66 SR33-66 SR33-97 55 20 40 SR33-66 SR33-80 SR33-80 SR33-132 66 20 50 SR33-80 SR33-132 SR33-132 SR33-132 80 30 60 SR33-97 SR33-132 SR33-132 SR33-160 97 30 75 SR33-132 SR33-195 SR33-195 SR33-241 132 50 100 SR33-160 SR33-241 SR33-241 SR33-280 160 60 125 SR33-195 SR33-241 SR33-280 SR33-350 195 75 150 3 starts/hr SR33-241 SR33-280 SR33-350 SR33-430 241 75 200 SR33-280 SR33-350 SR33-430 SR33-482 280 100 200 SR33-350 SR33-482 SR33-482 350 125 250 SR33-430 430 150 350 SR33-482 482 200 400 Motor Class 30
SR33-41 SR33-55 SR33-97 SR33-132 SR33-132 SR33-160 SR33-195 SR33-280 SR33-350 SR33-430 SR33-482

10

510

Can be difficult to start

5 20

5 510 1020 30 510 1015 5 1015

Unloaded at start Loaded at start Generally fans less than or equal to 45kW (60hp) Generally fans greater than or equal to 45kW (60hp) Special circuits ensure motor starts off-load Some compressor systems can be difficult to start No material in basin; off-load Material in basin

Low-Inertia Fan 10 High-Inertia Fan Off-Load Compressor Loaded Compressor Off-Load Mixer Heavy Mixer
30 5 20 5 20

FOR MOTOR OVERLOAD PROTECTION, THE SR33 MUST BE USED WITH A SEPARATE CUSTOMER-SUPPLIED OVERLOAD PROTECTION DEVICE THAT HAS A RATING CORRESPONDING TO THE APPLICABLE TRIP CLASS.

Volume 13

e14-10

Soft Starters

1 - 80 0 - 633 - 0405

Stellar SR33 Series Basic Soft Starters


SR33 Soft Starter Circuit Protection
100 90 80 70 60 50
40 30 20
Seconds to Trip

Company Information Systems Overview Programmable Controllers

Field I/O

UL Short Circuit Protection **


SR33 Short Model Circuit Number * Rating SR33-22 SR33-29 SR33-41 SR33-55 SR33-66 SR33-80 SR33-97 SR33-132 SR33-160 SR33-195 SR33-241 SR33-280
1.1
265 308 385 473 530
5kA 5kA 5kA 5kA 10kA 10kA 10kA 10kA 10kA 10kA 18kA 18kA

Software C-more & other HMI Drives Soft Starters Motors & Gearbox Steppers/ Servos Motor Controls Proximity Sensors Photo Sensors Limit Switches Encoders Current Sensors Pressure Sensors Temperature Sensors Pushbuttons/ Lights Process Relays/ Timers Comm. Terminal Blocks & Wiring Power Circuit Protection Enclosures Tools Pneumatics Appendix Product Index

40C [104F] 3 starts/hr

Class J High-Speed Circuit or RK5 Time-Delay Breaker Current-Limiting Rated Fuse *** 600VAC Rated 600VAC
35A 45A 60A 80A 125A 175A 200A 250A 350A 400A 450A 450A 350A 450A 500A

10 9 8 7 6 5

4 3 2

1 Rated Current
241A 280A 350A 430A 482A

1.5
361 420 525 645 723

2
482 560 700 860 964

2.5
602 700 875 1075 1205

3
723 840 1050 1290 1446

3.5
843 980 1225 1505 1687

4
964 1120 1400 1720 1928

4.5 x I e * Soft starters SR33-350 to SR33-482 are NOT UL listed or


recognized.

1084 1260 1575 1935 2169

** Suitable for use on a circuit capable of delivering not more than the RMS symmetrical Amperes as indicated at 480VAC maximum, when protected by fuses or inverse-time circuit breakers with rated maximum Amperes as indicated. *** Fuse comparable to Edison type JHL (class J) or ECSR (class RK5).

Trip Level Current (Amps)

The SR33 can be used at ratings other than those stated. Use the above trip curves to determine the required unit for the duty. As an example, the SR33-280 will run a 200hp motor (280 Amp) at the maximum continuous running current and will allow an overload of 3 x 280 Amp (840A) for 12 seconds, 3 times per hour. The unit would also allow a 3.5 x overload (980A) for approximately 5 seconds, 3 times per hour. Following an overload trip, subsequent restarts can be restricted due to a cooling time. The severity of overload determines the cooling time, which has a maximum value of 10 minutes.
THE SOFT STARTER OVERLOAD TRIP CURVE
SHOWN ON THIS PAGE APPLIES ONLY TO

RECOMMENDED FUSING for IEC Type 1 Coordination Short Circuit Protection


SR33 Model Number SR33-22 SR33-29 SR33-41 SR33-55 SR33-66 SR33-80 SR33-97 SR33-132 SR33-160 SR33-195 SR33-241 SR33-280 SR33-350 SR33-430 SR33-482 Rated Short Circuit Current SIBA Semiconductor Fuse
2018920.50A 5kA 2018920.100A

Class J High-Speed or RK5 TimeDelay Current-Limiting Fuse* Rated 600VAC Amp


35A 45A 60A 80A 125A 175A 200A 250A 350A 400A 450A

Edison JHL Part #


JHL35 JHL45 JHL60 JHL80 JHL125 JHL175 JHL200 JHL250 JHL350 JHL400 JHL450

2018920.125A

2061032.200A 10kA 2061032.250A 2061032.400A

SR33-241 THROUGH SR33-482, AND IT PROVIDES PROTECTION ONLY FOR THE SOFT STARTER. FOR MOTOR OVERLOAD PROTECTION, A SEPARATE CUSTOMER-SUPPLIED OVERLOAD PROTECTION DEVICE MUST BE PROVIDED.
MODEL NUMBERS

2062032.630 18kA 2063032.1000

Part # Index

* Fuse comparable to Edison type JHL (class J) or ECSR (class RK5).


Volume 13

w w w. a u t o m a t i o n d i r e c t . c o m / s o f t- s t a r t e r s

Soft Starters

e14-11

You might also like