Scribd
Upload
23 views1 page

ACC EN Product Specification

The ACC-EN is a versatile analogue multi-sensor that combines optical and thermal elements for fire detection, featuring user-selectable modes and a removable smoke chamber for maintenance. It operates on a voltage range of 17-41 VDC, has a low power mode of 120 μA, and is approved to EN54 standards. The sensor is available in ivory, white, and black, and is compatible with various bases, offering a reliable solution for fire safety applications.

Uploaded by

uoiems
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views1 page

ACC EN Product Specification

The ACC-EN is a versatile analogue multi-sensor that combines optical and thermal elements for fire detection, featuring user-selectable modes and a removable smoke chamber for maintenance. It operates on a voltage range of 17-41 VDC, has a low power mode of 120 μA, and is approved to EN54 standards. The sensor is available in ivory, white, and black, and is compatible with various bases, offering a reliable solution for fire safety applications.

Uploaded by

uoiems
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ACC-EN

Analogue Multi-Sensor

Features
User selectable modes
Incorporates Optical & Heat elements
Removable, High Performance Chamber
Twin LEDs allow 360° viewing – green when polling, turning red in fire
Pulsing/non-pulsing controlled from panel*
Variable sensitivity
Approved to EN54-7, 5, 29
Electronically Addressed
LPCB & VdS approved to classes A1 & C
Also available in white and black
SIL Level 2 capable variants available.

Description
Model ACC-EN is a Multi-Sensor, which is fully compatible with Hochiki’s ESP allowing either the optical element or thermal element or both elements to be
Analogue Addressable Protocol, and incorporates a thermal element and High active in making the fire decision. The sensor polling LEDs can be controlled
Performance photoelectric smoke chamber. via the Control Panel (pulsing/non-pulsing). The ACC-EN smoke chamber can
easily be removed or replaced for easy maintenance.
The ACC-EN has three modes, which are controlled from the Control Panel,

Specification
Ordering code ACC-EN - Ivory / ACC-EN(WHT) - White / ACC-EN(BLK) - Black

Operating Voltage 17 – 41 VDC

Low Power Mode 120 μA (typ.)

Quiescent Current 400 μA (typ.)

Alarm Current (controlled by CIE) 9.1 mA (excluding remote indicator)

Transmission Method Digital Communications using ESP

Operating Temperature Range -10 °C to + 50 °C

Operating Humidity 95 %RH - Non Condensing (at 40 °C)

Storage Temperature Range -30 °C to +60 °C

Storage Humidity <80% RH at 60 °C

Colour / Case Material Ivory, White or Black / Polycarbonate

Weight (g) 95

Diameter (mm) / Height (mm) 100 / 45

Compatible Bases YBN-R/3, YBO-R/SCI, YBN-R/3(SCI)*2, YBO-BS, YBO-BS2, YBO-BS2(SCI)*2, YBO-BSB, YBO-BSB2, YBV-R/4*2

Base Fixing Centres (mm) 48 ~ 74

EN54-7, EN54-5 and EN54-29*2


Approvals
LPCB & VdS approved to classes A1 & C

Wind Exposure (Ref EN54-7) 1 ± 0,2 m s-1

IP Rating IP42

* Control Panel compatibility required


*1 Integral SCI functionality

For further information visit our website.


Hochiki reserves the right to alter the specification of its products from time to time without notice. Although
ISS6 every effort has been made to ensure the accuracy of the information contained in this document it is not
MAR22 warranted or represented by Hochiki to be a complete and up-to-date description. Check online for current version.

You might also like