Chapter 11 (2) N M
Chapter 11 (2) N M
Circle is defined as the locus of a point which moves in a plane such that its distance from a
fixed point in that plane is constant.
(i) Equation of circle having centre (h, k) and radius (x — h)2 + (y — k)2 = a2.
(ii) When the circle passes through the origin, then equation of the circle is x 2 + y2 — 2hx —
2ky = 0.
(iii) When the circle touches the X-axis, the equation is x2 + y2 — 2hx — 2ay + h2 = O.
2|Page
(vi) Equation of the circle passing through the origin and centre lying on the X-axis is x2 +
y2 — 2ax = O.
(vii) Equation of the circle passing through the origin and centre lying on the Y-axis is x2 + y2 –
2ay = 0.
3|Page
(viii) Equation of the circle through the origin and cutting intercepts a and b on the coordinate
axes is x2 + y2 — by = 0.
(ix) Equation of the circle, when the coordinates of end points of a diameter are (x1, y1) and (x2,
y2) is
(x) Equation of the circle passes through three given points (x 1, y1), (x2, y2) and (x3, y3) is
(x – h)2 + (y – k)2 = a2 is
x = h + a cosθ, y = k + a sinθ,
0 ≤ θ ≤ 2π
For circle x2 + y2 = a2, parametric equation is
x = a cos θ, y = a sin θ
4|Page
The general equation of a circle is given by x2 + y2 + 2gx + 2fy + c = 0, where centre of the
circle = (- g, – f)
1. If g2 + f2 – c > 0, then the radius of the circle is real and hence the circle is also real.
2. If g2 + f2 – c = 0, then the radius of the circle is 0 and the circle is known as point circle.
3. If g2 + f2 – c< 0, then the radius of the circle is imaginary. Such a circle is imaginary,
which is not possible to draw.
The length of the intercepts made by the circle x2 + y2 + 2gx + 2fy + c = 0 with X and Y-axes
are
1. If g2 > c, then the roots of the equation x2 + 2gx + c = 0 are real and distinct, so the circle
x2 + y2 + 2gx + 2fy + c = 0 meets the X-axis in two real and distinct points.
2. If g2 = c, then the roots of the equation x2 + 2gx + c = 0 are real and equal, so the circle
touches X-axis, then intercept on X-axis is O.
3. If g2 < c, then the roots of the equation x2 + 2gx + c = 0 are imaginary, so the given
circle does not meet X-axis in real point. Similarly, the circle x2 + y2 + 2gx + 2fy + c = 0
cuts the Y-axis in real and distinct points touches or does not meet in real point
according to f2 >, = or < c
Equation of Tangent
5|Page
1. Point Form
1. The equation of the tangent at the point P(x1, y1) to a circle x2 + y2 2gx + 2fy + c= 0
is xx1 + yy1 + g(x + x1) + f(y + y1) + c = 0
2. The equation of the tangent at the point P(x1, y1) to a circle x2 + y2 is xx1 + yy1 = r2
2. Slope Form
(i) The equation of the tangent of slope m to the circle x2 + y2 + 2gx + 2fy + c = 0
(ii) The equation of the tangents of slope m to the circle (x – a)2 (y – b)2 = r2 are y – b = m(x –
a) ± r√(1 + m2) and the coordinates of the points of contact are
(iii) The equation of tangents of slope m to the circle x2 + y2 = r2 are y = mx ± r√(1 + m2) and
the coordinates of the point of contact are
3. Parametric Form
The equation of the tangent to the circle (x – a)2 + (y – b)2 = r2 at the point (a + r cos θ, b + r
sinθ) is (x – a) cos θ + (y – b) sin θ = r.
Equation of Normal
1. Point Form
1. (i) The equation of normal at the point (x1, y1) to the circle x2 + y2 + 2gx + 2fy + c = 0 is
y – y1 = [(y1 + f)(x – x1)]/(x1 + g)
(y1 + f)x – (x1 + g)y + (gy1 – fx1) = 0
2. (ii) The equation of normal at the point (x1, y1) to the circle
x2 + y2 = r2 is x/x1 = y/y1
2. Parametric Form
6|Page
or y = x tan θ.
(i) The line y = mx + c meets the circle in unique real point or touch the circle
x2 + y2 + r2, if r = |c/√1 + m2
(ii) The line lx + my + n = 0 touches the circle x2 + y2 = r2, if r2(l2 + m2) = n2.
(iv) The point of intersection of the tangent at the points P(θ1) and Q(θ2) on the circle x2 + y2 =
r2
(v) Normal at any point on the circle is a straight line which is perpendicular to the tangent to
the curve at the point and it passes through the centre of circle.
(vi) Power of a point (x1, y1) with respect to the circle x2 + y2 + 2gx + 2fy + c = 0 is x12 + y12 +
2gx1 + 2fy1 + c.
(vii) If P is a point and C is the centre of a circle of radius r, then the maximum and minimum
distances of P from the circle are CP + r and CP — r , respectively.
(viii) If a line is perpendicular to the radius of a circle at its end points on the circle, then the
line is a tangent to the circle and vice-versa.
Pair of Tangents
(i) The combined equation of the pair of tangents drawn from a point P(x1, y1) to the circle x2 +
y2 = r2 is
7|Page
(ii) The length of the tangents from the point P(x1, y1) to the circle x2 + y2 + 2gx + 2fy + c = 0
is equal to
(iii) Chord of contact TT’ of two tangents, drawn from P(x 1, y1) to the circle x2 + y2 = r2 or T =
0.
x2 + y2 + 2gx + 2fy + c = 0 is
(iv) Equation of Chord Bisected at a Given Point The equation of chord of the circle S ≡
x2 + y2 + 2gx + 2fy + c = 0 bisected at the point (x1, y1) is give by T = S1.
i.e., xx1 + yy1 + g (x + x1) + f (y + y1) + c
= x12 + y12 + 2gx1 + fy1 + c
(v) Director Circle The locus of the point of intersection of two perpendicular tangents to a
given circle is called a director circle. For circle x2 + y2 = r2, the equation of director circle is
x2 + y2 = 2r2.
Common Chord
The chord joining the points of intersection of two given circles is called common chord.
8|Page
S1 ≡ x2 + y2 + 2g1x + 2f1y + c1 = 0
and S2 ≡ x2 + y2 + 2g2x + 2f2y + c2 = 0
then their common chord is given by S1 — S2 = 0
(ii) If C1, C2 denote the centre of the given circles, then their common chord
PQ = 2 PM = 2√(C1P)2 – C1M)2
(iii) If r1, and r2 be the radii of ‘two circles, then length of common chord is
The angle of intersection of two circles is defined as the angle between the tangents to the two
circles at their point of intersection is given by
Orthogonal Circles
Two circles are said to be intersect orthogonally, if their angle of intersection is a right angle.
If two circles
Family of Circles
(i) The equation of a family of circles passing through the intersection of a circle x 2 + y2 + 2gx
+ 2fy + c = 0 and line
L = lx + my + n = 0 is S + λL = 0
(ii) The equation of the family of circles passing through the point A(x1, y1) and B (x1, y1) is
xx2 + y2 + 2gx + 2fy + c + λ, [xx1 + yy1 + g(x + x1) + f(Y+ Y1) + c] = 0 or S + λL = 0, where L
= 0 is the equation of the tangent to
(iv) Any circle passing through the point of intersection of two circles S 1 and S2 is S1 +λ(S1 —
S2) = 0.
Radical Axis
The radical axis of two circles is the locus of a point which moves in such a way that the length
of the tangents drawn from it to the two circles are equal.
A system of circles in which every pair has the same radical axis is called a coaxial system of
circles.
1. The radical axis of two circles is always perpendicular to the line joining the centres of
the circles.
2. The radical axis of three vertices, whose centres are non-collinear taken in pairs of
concurrent.
3. The centre of the circle cutting two given circles orthogonally, lies on their radical axis.
4. Radical Centre The point of intersection of radical axis of three circles whose centre are
non-collinear, taken in pairs, is called their radical centre.
If through a point P (x1, y1) (within or outside a circle) there be drawn any straight line to meet
the given circle at Q and R, the locus of the point of intersection of tangents at Q and R is
called the polar of P and po.:.at P is called the pole of polar.
A system of circle is said to be coaxial system of circles, if every pair of the circles in the
system has same radical axis.
1. The equation of a system of coaxial circles, when the equation of the radical axis P ≡ lx
+ my + n = 0 and one of the circle of the system S = x2 + y2 + 2gx + 2fy + c = 0, is S +
λP = 0.
2. Since, the lines joining the centres of two circles is perpendicular to their radical axis.
Therefore, the centres of all circles of a coaxial system lie on a straight line, which is
perpendicular to the common radical axis.
Limiting Points
Limiting points of a system of coaxial circles are the centres of the point circles belonging to
the family.
∴ √g2 — c = 0 ⇒g = ± √c
Thus, limiting points of the given coaxial system as (√c, 0) and (—√c, 0).
(x — x1)2 + (y — y1)2 + XL = 0.
(ii) Circumcircle of a A with vertices (x1, y1), (x2, y2), (x3, y3) is
(iii) A line intersect a given circle at two distinct real points, if the length of the perpendicular
from the centre is less than the radius of the circle.
12 | P a g e
(iv) Length of the intercept cut off from the line y = mx + c by the circle x2 + y2 = a2 is
(v) In general, two tangents can be drawn to a circle from a given point in its plane. If m1 and
m2 are slope of the tangents drawn from the point P(x1, y1) to the circle x2 + y2 = a2, then
(vii) Let S1 = 0, S2 = 0 be two circles with radii r1 , r2, then S1/r1 ± S2/r2 = 0 will meet at right
angle.
(viii) The angle between the two tangents from (x1, y1) to the circle x2 + y2 = a2 is 2 tan-
1
(a/√S1).
(ix) The pair of tangents from (0, 0) to the circle x2 + y2 + 2gx + 2fy + c = 0 are at right angle,
if g2 + f2 = 2c.
(x) If (x1, y1) is one end of a diameter of the circle x2 + y2 + 2gx + 2fy + c = 0, then the other
end will be (-2g – x1, -2f – y1).
where, r = √g2 + f2 — c
13 | P a g e
Diameter of a Circle
The locus of the middle points of a system of parallel chords of a circle is called a diameter of
the circle.
(i) The equation of the diameter bisecting parallel chords y = mx + c of the circle x2 + y2 = a2 is
x + my = 0.
(ii) The diameter corresponding to a system of parallel chords of a circle always passes through
the centre of the circle and is perpendicular to the parallel chords.
Let the centres and radii of two circles are C1, C2 and r1, r2, respectively.
1. (i) When one circle contains another circle, no common tangent is possible.
Condition, C1C2 < r1 – r2
2. (ii) When two circles touch internally, one common tangent is possible.
Condition , C1C2 = r1 – r2
3. (iii) When two circles intersect, two common tangents are possible.
Condition, |r1 — r2| < C1C2 < |r1 + r2|
4. (iv) When two circles touch externally, three common tangents are possible.
Condition, C1C2 = r1 + r2
5. (v) When two circles are separately, four common tangents are possible.
Condition, C1C2 > r1 + r2
Let AS is a chord of contact of tangents from C to the circle x2 + y2 = r2. M is the mid-point of
AB.
1|Page
The line segment through the foci of the ellipse with its end points on the ellipse, is called its
major axis.
The line segment through the centre and perpendicular to the major axis with its end points on
the ellipse, is called its minor axis.
If the coefficient of x2 has the larger denominator, then its major axis lies along the x-axis, then
it is said to be horizontal ellipse.
(viii) Focal distances are SP and SlP i.e., a – ex and a + ex. Also, SP + SlP = 2a = major axis.
2|Page
If the coefficient of x2 has the smaller denominator, then its major axis lies along the y-axis,
then it is said to be vertical ellipse.
Let P be any point on the ellipse and PN be perpendicular to the major axis AA’, such that PN
produced meets the ellipse at P’. Then, PN is called the ordinate of P and PNP’ is the double
ordinate of P .
If centre of the ellipse is (h, k) and the direction of the axes are parallel to the coordinate axes,
then its equation is (x – h)2 / a2 + (y – k)2 / b2 = 1
The point (x1, y1) lies outside, on or inside the ellipse x2 / a2 + y2 / b2 = 1 according as x21 / a2 + y21 / b2 – 1 > 0, = or < 0.
Auxiliary Circle
Director Circle
The locus of the point of intersection of perpendicular tangents to an ellipse is a director circle.
If equation of an ellipse is x2 / a2 + y2 / b2 = 1, then equation of director circle is x2 + y2 = a2 +
b2.
Parametric Equation
The equation x = a cos φ, y = b sin φ, taken together are called the parametric equations of the
ellipse x2 / a2 + y2 / b2 = 1 , where φ is any parameter.
4|Page
Equation of Chord
Let P(a cos θ, b sin θ) and Q(a cos φ, b sin φ) be any two points of the ellipse x2 / a2 + y2 / b2 =
1.
(ii) The equation of the chord of contact of tangents drawn from an point (x 1, y1) to the ellipse
x2 / a2 + y2 / b2 = 1 is xx1 / a2 + yy1 / b2 = 1.
(iii) The equation of the chord of the ellipse x2 / a2 + y2 / b2 = 1 bisected at the point (x1, y1) is
given by
or T = S1
Equation of Tangent
(i) Point Form The equation of the tangent to the ellipse x2 / a2 + y2 / b2 = 1 at the point (x1, y1)
is xx1 / a2 + yy1 / b2 = 1.
(ii) Parametric Form The equation of the tangent to the ellipse at the point (a cos θ, b sin θ) is
x / a cos θ + y / b sin θ = 1.
(iii) Slope Form The equation of the tangent of slope m to the ellipse x2 / a2 + y2 / b2 = 1 are y
= mx ± √a2m2 + b2 and the coordinates of the point of contact are
(iv) Point of Intersection of Two Tangents The equation of the tangents to the ellipse at
points P(a cosθ1, b sinθ1) and Q (a cos θ2, b sinθ2) are
Equation of Normal
(i) Point Form The equation of the normal at (x1, y1) to the ellipse x2 / a2 + y2 / b2 = 1 is
a2x / x1 + b2y / y1 = a2 – b2
(ii) Parametric Form The equation of the normal to the ellipse x2 / a2 + y2 / b2 = 1 at (a cos θ,
b sin θ) is
ax sec θ – by cosec θ = a2 – b2
(iii) Slope Form The equation of the normal of slope m to the ellipse x2 / a2 + y2 / b2 = 1 are
given by y = mx – m (a2 – b2) / √a2 + b2m2
(iv) Point of Intersection of Two Normals Point of intersection of the normal at points (a cos
θ1, b sin θ1) and (a cos θ2, b sin θ2) are given by
Conormal Points
The points on the ellipse, the normals at which the ellipse passes through a given point are
called conormal points.
6|Page
(i) The sum of the eccentric angles of the conormal points on the ellipse, x 2 / a2 + y2 / b2 = 1 is
an odd multiple of π.
(ii) If θ1, θ2, θ3 and θ4 are eccentric angles of four points on the ellipse, the normals at which are
concurrent, then
(iii) If θ1, θ2 and θ3 are the eccentric angles of three points on the ellipse x2 / a2 + y2 / b2 = 1,
such that
(iv) If the normal at four points P(x1, y1) , Q(x2, y2), R(x3, y3) and S(x4, y4) on the ellipse x2 /
a2 + y2 / b2 = 1, are concurrent, then
The locus of the mid-point of a system of parallel chords of an ellipse is called a diameter,
whose equation of diameter is
y = – (b2 / a2m) x
Two diameters of an ellipse are said to be conjugate diameters, if each bisects the chords
parallel to the other.
(i) The eccentric angles of the ends of a pair of conjugate diameters of an ellipse differ by a
right angle.
(ii) The sum of the squares of any two conjugate semi-diameters of an ellipse is constant and
equal to the sum of the squares of the semi-axis of the ellipse i. e., CP2 + CD2 = a2 + b2.
SP * S1P = CQ2
(iv) The tangent at the ends of a pair of conjugate diameters of an ellipse form a parallelogram.
(v) The area of the parallelogram formed by the tangents at the ends of conjugate diameters of
an ellipse is constant and is equal to the product of the axis.
Important Points
1. The point P(x1 y1) lies outside, on or inside the ellipse x2 / a2 + y2 / b2 = 1 according as x21 /
a2 + y21 / b2 – 1 > 0, or < 0.
x2 / a2 + y2 / b2 = 1, if c2 = a2m2 + b2
3. The combined equation of the pair of tangents drawn from a point (x 1 y1) to the ellipse x2 /
a2 + y2 / b2 = 1 is
i.e, SS1 = T2
4. The tangent and normal at any point of an ellipse bisect the external and internal angles
between the focal radii to the point.
5. If SM and S’ M’ are perpendiculars from the foci upon the tangent at any point of the ellipse,
then SM x S’ M’ = b2 and M, M’ lie on the auxiliary circle.
8|Page
6. If the tangent at any point P on the ellipse x2 / a2 + y2 / b2 = 1 meets the major axis in T and
minor axis in T’, then CN * CT = a2 ,CN’ * Ct’ = p2, where N and N’ are the foot of the
perpendiculars from P on the respective axis.
7. The common chords of an ellipse and a circle are equally inclined to the axes of the ellipse.
9. Polar of the point (x1 y1) with respect to the ellipse x2 / a2 + y2 / b2 = 1 is xx1 / a2 + yy1 / b2 =
1.
11. Two tangents can be drawn from a point P to an ellipse. These tangents are real and distinct
or coincident or imaginary according as the given point lies outside, on or inside the ellipse.
x2 / a2 + y2 / b2 = ex / a2.
14. Point of intersection of the tangents at two points on the ellipse x 2 / a2 + y2 / b2 = 1, whose
eccentric angles differ by a right angles lies on the ellipse x2 / a2 + y2 / b2 = 2.
tan-1 ( ± b / ae).
17. The straight lines y = m1x and y =m2x are conjugate diameters of an ellipse x2 / a2 + y2 /
b2 = 1, if m1m2 = – b2 / a2.
18. The normal at point P on an ellipse with foci S, S1 is the internal bisector of ∠ SPS1.
1|Page
The fixed point is called the focus and the fixed line is directrix and the ratio is the eccentricity.
The line through the foci of the hyperbola is called its transverse axis.
The line through the centre and perpendicular to the transverse axis of the hyperbola is called
its conjugate axis.
1. Centre O(0, 0)
2. Foci are S(ae,0),S1(-ae, 0)
3. Vertices A(a, 0), A1(-a, 0)
4. Directrices / : x = a/e, l’ : x = -a/e
5. Length of latusrectum LL1 = L’L’1 = 2b2/a
6. Length of transverse axis 2a.
7. Length of conjugate axis 2b.
8. Eccentricity or b2 = a2(e2 – 1)
9. Distance between foci =2ae
10. Distance between directrices = 2a/e
Conjugate Hyperbola
2|Page
The distance of a point on the hyperbola from the focus is called it focal distance. The
difference of the focal distance of any point on a, hyperbola is constant and is equal to the
length of transverse axis the hyperbola i.e.,
S1P — SP = 2a
where, S and S1 are the foci and P is any point or P the hyperbola.
1 If the centre of the hyperbola is (h, k) and the directions of the axes are parallel to the
coordinate axes, then the equation of the hyperbola, whose transverse and conjugate axes are 2a
and 2b is
3|Page
2. If a point P(x, y) moves in the plane of two perpendicular straight lines a 1x + b1y + c1 = 0
and b1x – a1y + c2 = 0 in such a way that
Then, the locus of P is hyperbola whose transverse axis lies along b1x – a1y + c2 = 0 and
conjugate axis along the line a1x + b1y + c1 = 0. The length of transverse and conjugate axes are
2a and 2b, respectively.
Parametric Equations
x = a sec θ, y = b tan θ
or x = a cosh θ, y = b sinhθ
Equation of Chord
(i) Equations of chord joining two points P(a sec θ1, b tan θ1,) and Q(a sec θ2, b tan θ2) on the
hyperbola
(ii) Equations of chord of contact of tangents drawn from a point (x1, y1) to the
hyperbola
4|Page
(iii) The equation of the chord of the hyperbola bisected at point (x1, y1) is given
by
hyperbola
the hyperbola
(iv) The tangent at the points P(a sec θ1 , b tan θ1) and Q (a sec θ2, b tan θ2) intersect at the
point
(v) Two tangents drawn from P are real and distinct, coincident or imaginary according as the
roots of the equation m2(h2 – a2) – 2khm + k2 + b2 = 0. are real and distinct, coincident or
imaginary.
contacts
hyperbola
5|Page
(ii) Parametric Form The equation of the normal at (a sec θ, b tan θ) to the
hyperbola
is ax cos θ + by cot θ = a2 + b2.
(iii) Slope Form The equations of the normal of slope m to the hyperbola are
given by
(v) Maximum four normals can be drawn from a point (x1, y1) to the hyperbola
Conormal Points
Points on the hyperbola, the normals at which passes through a given point are called conormal
points.
1. The sum of the eccentric angles of conormal points is an odd ion multiple of π.
4. If the normals at four points P(x1, y1), Q(x2, y2), R(x3 , y3) and S(X4, y4) on the
1. Two points are said to be conjugate points with respect to a hyperbola, if each lies on the
polar of the other.
hyperbola is
Asymptote
An asymptote to a curve is a straight line, at a finite distance from the origin, to which the
tangent to a curve tends as the point of contact goes to infinity.
Director Circle
The locus of the point of intersection of the tangents to the hyperbolo , which are
perpendicular to each other, is called a director circle. The equation of director circle is x 2 +
y2 = a2 – b2.
Rectangular Hyperbola
6. Directrices x = + a/√2
7. Latusrectum = 2a
8. Parametric form x = a sec θ, y = a tan θ
9. Equation of tangent, x sec θ – y tan θ = a
1. Point Form The equation of tangent at (x1, y1) to the rectangular hyperbola is xy1 + yx1 =
2c2 or (x/x1 + y/y1) = 2.
2. Parametric Form The equation of tangent at (ct, c/t) to the hyperbola is( x/t + yt) = 2c.
3. Tangent at P(ct1, c/t1) and Q (ct2, c/t2) to the rectangular hyperbola intersect
a
4. The equation of the chord of contact of tangents drawn from a point (x 1, y1) to the
rectangular hyperbola is xy1 + yx1 = 2c2.
1. Point Form The equation of the normal at (x1, y1) to the rectangular hyperbola is xx1 –
yy1 = x12 – y12.
2. Parametric Form The equation of the normal at ( ct, c/t)to the rectangular hyperbola xy
= c2 is xt3 — yt — ct4 + c = O.
3. The equation of the normal at( ct, c/t)is a fourth degree equation t in t. So, in general
four normals can be drawn from a point to the hyperbola xy = c2.
1. The point (x1, y1) lies outside, on or inside the hyperbola according
as
2. The combined equation of the pairs of tangent drawn from a point P(x1, y1) lying outside
the hyperbola
3. The equation of the chord of the hyperbola xy = c2 whose mid-point is (x1, y1) is
xy1 + yx1 = 2x1y1
or t = S1
4. Equation of the chord joining t1, t2 on xy = t2 is
x + yt1t2 = c(t1 + t2)
5. Eccentricity of the rectangular hyperbola is √2 and the angle between asymptotes is 90°.
6. If a triangle is inscribed in a rectangular hyperbola, then its orthocentre lies on the
hyperbola.
7. Any straight line parallel to an asymptotes of a hyperbola intersects the