Activity 2 1

OBJECTIVE MATERIAL REQUIRED

To verify that the relation R in the set A piece of plywood, some pieces of
L of all lines in a plane, defined by wire (8), plywood, nails, white paper,
R = {( l, m) : l || m} is an equivalence glue.
relation.

METHOD OF CONSTRUCTION
Take a piece of plywood of convenient size and paste a white paper on it. Fix
the wires randomly on the plywood with the help of nails such that some of
them are parallel, some are perpendicular to each other and some are inclined
as shown in Fig. 2.

DEMONSTRATION
1. Let the wires represent the lines l1, l2, ..., l8.
2. l1 is perpendicular to each of the lines l2, l3, l4 (see Fig. 2).
 3. l6 is perpendicular to l7.
4. l2 is parallel to l3, l3 is parallel to l4 and l5 is parallel to l8.
5. (l2, l3), (l3, l4), (l5, l8), ∈ R

OBSERVATION
1. In Fig. 2, every line is parallel to itself. So the relation R = {( l, m) : l || m}
.... reflexive relation (is/is not)
2. In Fig. 2, observe that l2
l3 . Is l3 ... l2? (|| / || )
So, (l2, l3) ∈ R ⇒ (l3, l2) ... R (∉/∈)
Similarly, l3 || l4. Is l4 ...l3? (|| / || )
So, (l3, l4) ∈ R ⇒ (l4, l3) ... R (∉/∈)
and (l5, l8) ∈ R ⇒ (l8, l5) ... R (∉/∈)

∴ The relation R ... symmetric relation (is/is not)

3. In Fig. 2, observe that l2 || l3 and l3 || l4. Is l2 ... l4 ? (|| / || )
So, (l2, l3) ∈ R and (l3, l4) ∈ R ⇒ (l2, l4) ... R (∈/∉)

Similarly, l3 || l4 and l4 || l2. Is l3 ... l2 ? (|| / || )

So, (l3, l4) ∈ R, (l4, l2) ∈ R ⇒ (l3, l2) ... R (∈,∉)
Thus, the relation R ... transitive relation (is/is not)
Hence, the relation R is reflexive, symmetric and transitive. So, R is an
equivalence relation.

APPLICATION NOTE
This activity is useful in understanding the This activity can be repeated
concept of an equivalence relation. by taking some more wires
in different positions.

104 Laboratory Manual

Activity 4 2
OBJECTIVE MATERIAL REQUIRED
To demonstrate a function which is Cardboard, nails, strings, adhesive
one-one but not onto. and plastic strips.

METHOD OF CONSTRUCTION
1. Paste a plastic strip on the left hand side of the cardboard and fix two nails
in it as shown in the Fig. 4.1. Name the nails as a and b.
2. Paste another strip on the right hand side of the cardboard and fix three
nails on it as shown in the Fig. 4.2. Name the nails on the right strip as
1, 2 and 3.
3. Join nails on the left strip to the nails on the right strip as shown in the Fig. 4.3.

DEMONSTRATION
1. Take the set X = {a, b}
2. Take the set Y = {1, 2, 3}.
3. Join elements of X to the elements of Y as shown in Fig. 4.3.
OBSERVATION
1. The image of the element a of X in Y is ______________.

The image of the element b of X in Y is ______________.

So, the Fig. 4.3 represents a _____________________.

2. Every element in X has a _________ image in Y. So, the function is
_____________ (one-one/not one-one).
3. The pre-image of the element 1 of Y in X __________ (exists/does not
exist). So, the function is __________ (onto/not onto).

Thus, Fig. 4.3 represents a function which is _________ but not onto.

APPLICATION
This activity can be used to demonstrate the concept of one-one but not onto
function.

108 Laboratory Manual

 2
Activity 53 3
OBJECTIVE MATERIAL REQUIRED
To draw the graph of sin −1 x , using the Cardboard, white chart paper, ruler,
graph of sin x and demonstrate the coloured pens, adhesive, pencil,
concept of mirror reflection (about eraser, cutter, nails and thin wires.
the line y = x).

METHOD OF CONSTRUCTION
1. Take a cardboard of suitable dimensions, say, 30 cm × 30 cm.
2. On the cardboard, paste a white chart paper of size 25 cm × 25 cm (say).
3. On the paper, draw two lines, perpendicular to each other and name them
X′OX and YOY′ as rectangular axes [see Fig. 5].

24/04/18
 4. Graduate the axes approximately as shown in Fig. 5.1 by taking unit on
X-axis = 1.25 times the unit of Y-axis.
5. Mark approximately the points

π π π π π π
 ,sin  ,  ,sin  , ... ,  ,sin  in the coordinate plane and at each
6 6 4 4 2 2
point fix a nail.
6. Repeat the above process on the other side of the x-axis, marking the points
 –π –π   – π –π   –π –π 
 ,sin ,  ,sin  , ... ,  ,sin  approximately and fix nails
 6 6   4 4   2 2 
on these points as N1′, N2′, N3′, N4′. Also fix a nail at O.
7. Join the nails with the help of a tight wire on both sides of x-axis to get the
–π π
graph of sin x from to .
2 2
8. Draw the graph of the line y = x (by plotting the points (1,1), (2, 2), (3, 3), ...
etc. and fixing a wire on these points).
9. From the nails N1, N2, N3, N4, draw perpendicular on the line y = x and produce
these lines such that length of perpendicular on both sides of the line y = x
are equal. At these points fix nails, I1,I2,I3,I4.
10. Repeat the above activity on the other side of X- axis and fix nails at I1′,I2′,I3′,I4′.
11. Join the nails on both sides of the line y = x by a tight wire that will show the
graph of y = sin −1 x .

DEMONSTRATION
Put a mirror on the line y = x. The image of the graph of sin x in the mirror will
represent the graph of sin −1 x showing that sin–1 x is mirror reflection of sin x
and vice versa.

110 Laboratory Manual

24/04/18
OBSERVATION
The image of point N1 in the mirror (the line y = x) is _________.
The image of point N2 in the mirror (the line y = x) is _________.
The image of point N3 in the mirror (the line y = x) is _________.
The image of point N4 in the mirror (the line y = x) is _________.
The image of point N1′ in the mirror (the line y = x) is _________.
The image point of N′2 in the mirror (the line y = x) is _________.
The image point of N′3 in the mirror (the line y = x) is _________.
The image point of N′4 in the mirror (the line y = x) is _________.
The image of the graph of six x in y = x is the graph of _________, and the
image of the graph of sin–1x in y = x is the graph of __________.

APPLICATION

Similar activity can be performed for drawing the graphs of cos –1 x, tan −1 x , etc.

Mathematics 111

24/04/18