Scribd
Upload
12 views4 pages

Rivot Obc Sor

The document outlines the Statement of Requirement (SOR) for an On-Board Charger (OBC) for the RIVOT Motors NX100 electric 2-wheeler. It includes detailed technical specifications for the battery pack and charger, safety features, firmware requirements, and display indications. The charger is designed to operate efficiently with specific input and output parameters, ensuring safety and communication via CAN protocol.

Uploaded by

Arsh Choudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views4 pages

Rivot Obc Sor

The document outlines the Statement of Requirement (SOR) for an On-Board Charger (OBC) for the RIVOT Motors NX100 electric 2-wheeler. It includes detailed technical specifications for the battery pack and charger, safety features, firmware requirements, and display indications. The charger is designed to operate efficiently with specific input and output parameters, ensuring safety and communication via CAN protocol.

Uploaded by

Arsh Choudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

RIVOT MOTORS INDIA PRIVATE LIMITED

Registered Office:
Fifth Floor, Oneness, 1st Cross, 1st Main, Sadashivnagar Main Road
Sadashivnagar, Belagavi-590001. Ph. 8988984646
[email protected]
CIN: U34300KA2019PTC125176

RIVOT MOTORS INDIA PVT LTD


Statement Of Requirement (SOR)

Version No. Description Date of submit


00 On Board Charger 24/05/2024
RIVOT MOTORS INDIA PRIVATE LIMITED
Registered Office:
Fifth Floor, Oneness, 1st Cross, 1st Main, Sadashivnagar Main Road
Sadashivnagar, Belagavi-590001. Ph. 8988984646
[email protected]
CIN: U34300KA2019PTC125176

1. Scope

The document specifies the requirement of an On-Board Charger (OBC) for the RIVOT Motors
NX100 model 2-wheeler electric vehicle.

2. Technical Specifications of Battery Pack

Parameter 2.2 kWh 4.4 kWh 6.6 kWh


Nominal Voltage 73.6V 73.6V 73.6V
Rated Capacity 2208wh 4416wh 6624wh
Operating Voltage 46-83.95V 46-83.95V 46-83.95V
Nominal charge current 30A 60A 90A
Operating temperature 0-55 0-55 0-55
(Charging)
Cell configuration 23S1P 23S2P 23S3P
Cell chemistry LFP LFP LFP
Cell nominal voltage 3.2 V 3.2 V 3.2 V
Cell rated capacity 30 AH 30 AH 30 AH
Cell operating voltage 2-3.65 V 2-3.65 V 2-3.65 V

Note: Above Specifications are subject to change but will remain as a 73.6V System

3. Technical Specifications of Charger

SL No Parameter Specification
1 Input Voltage 110-230 VAC
2 Input frequency 50 Hz
3 Input current 5A @ 230 VAC
4 Inrush Current 40A
5 Output Voltage 83.95V
6 Output Current 10A
7 Communication CAN 2.0B
8 Power factor >0.9
9 THD <5%
10 Efficiency >95%
RIVOT MOTORS INDIA PRIVATE LIMITED
Registered Office:
Fifth Floor, Oneness, 1st Cross, 1st Main, Sadashivnagar Main Road
Sadashivnagar, Belagavi-590001. Ph. 8988984646
[email protected]
CIN: U34300KA2019PTC125176

11 Load regulation <2%


3 Pin C14 Socket on the body
12 Input connector
with lock and Fuse
13 Input cable Not required
14 Output connector 8 mm Lugs at the Battery End
15 Output cable 1.5m
16 Ingress protection IP67
17 Overall dimensions in mm 190x110x60
18 Weight <2 kgs
AIS-156 Amd.3
19 Compliance
AIS-004 Part 3

Charger must operate in CC-CV profiles, with the values defined by the BMS with the necessary
maximum output power range and efficiency profile.

Charging time (0 to 100%): 2.2 kWh Battery – 3.5 hours


4.4 kWh Battery – 6.5 hours
6.6 kWh Battery – 10.5 hours

4. Safety Specifications of Charger

SL No Feature Name Feature Requirement


1 Under voltage Protection at Output 46V at cell voltage 2V
2 Under voltage Protection at Input 180V AC
3 Over voltage protection at the input 265V AC
4 Over voltage protection at the Output 83.95V
5 Over-Current Protection at Input 6A
6 Over-Current Protection at output 11A
7 Over-Temperature protection charger 0 °C to +55 °C
8 Over-Temperature protection battery 0 °C to +55 °C
9 Reverse Polarity protection No
10 Earth Detection Yes
11 Residual Current Measurement TC <100 mA, TT <100ms
12 Isolation Class 1
13 Insulation Class 1
RIVOT MOTORS INDIA PRIVATE LIMITED
Registered Office:
Fifth Floor, Oneness, 1st Cross, 1st Main, Sadashivnagar Main Road
Sadashivnagar, Belagavi-590001. Ph. 8988984646
[email protected]
CIN: U34300KA2019PTC125176

14 Output No-Load Protection Yes


15 Auto Power off while full charge Yes
CAN Communication Fault Yes
16
protection

5. Firmware Specifications

1. Communication via CAN 2.0, 500 kbps


2. Max. Charging voltage and charging current should be dynamically adjustable over CAN.
3. Ramp up current from 0 to max charging current during start of charging (soft start)
4. Derating of CC charging current based on the current temperature of the battery pack
(communicated via CAN)
5. communication from charger via CAN
a. Charger Status
b. Charger DC Current and Voltage
c. Fault Codes
d. Charge Temperature

6. Display / Indications on Charger

The charging must have the following:

1. Green LED
a. ON- Charger Ready (No faults)
b. OFF – Fault Present (Red LED Must be ON)
2. 4 LEDs Indicating SOC of the battery, each for 25%

You might also like