Scribd
Upload
18 views6 pages

ME 4504 Data Sheet

The document outlines the Mechanics of Machine Lab (ME 4504) course at the Islamic University of Technology, detailing the experiments conducted in the lab. It includes a list of experiments such as the study of simple mechanisms, gears, and balancing of shafts, along with data collection tables for each experiment. The course is part of the BSc in Mechanical Engineering program and carries a credit of 0.75.

Uploaded by

mehdihasan261098
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views6 pages

ME 4504 Data Sheet

The document outlines the Mechanics of Machine Lab (ME 4504) course at the Islamic University of Technology, detailing the experiments conducted in the lab. It includes a list of experiments such as the study of simple mechanisms, gears, and balancing of shafts, along with data collection tables for each experiment. The course is part of the BSc in Mechanical Engineering program and carries a credit of 0.75.

Uploaded by

mehdihasan261098
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Islamic University of Technology (IUT)

The Organization of Islamic Cooperation (OIC)

ME 4504
Mechanics of Machine Lab
Data Sheets

Program: Bsc.in ME Credit: 0.75


Semester: 5th Lab: Applied Mechanics Lab
ME 4504: Mechanics of Machine Lab 1

List of Experiments

Exp Page
Title of the Experiment
No. No.
1. Study of Different Simple Mechanisms
2. Study of different Loci
3. Study of different Gears
4. Study of M.A., velocity ratio and efficiency of spur gear system
5. Static and Dynamic Balancing of a Shaft
6. Determination of Critical Speed of Shafts
7. Study of Gyroscope

© Department of Mechanical and Production Engineering, IUT


ME 4504: Mechanics of Machine Lab 2

Student ID:
Exp. Study of Different Simple Mechanisms.
01
Data Collection
Table 1
Name of the Number of Links Number of Prismatic Number of Turning
Mechanism Pairs Pairs
Planar Four-Bar

Slider-Crank
Quick Return

Scotch Yoke

Table 2
Input Output
Crank
Angle Planar Four-Bar Slider-Crank (mm) Quick Return (mm) Scotch Yoke (mm)
(degrees) (degrees)

0
30
60
90
120
150
180
210
240
270
300
330
360

© Department of Mechanical and Production Engineering, IUT


ME 4504: Mechanics of Machine Lab 3

Student ID:
Exp.Study of M.A., velocity ratio and efficiency of spur gear
03(b) system

Data Collection
Load Effort Velocity Mechanical Efficiency of Load if 100% Effect of
FL (N) FE (N) Ratio Advantage the system, efficient, Friction
VR (MAactual) 𝑴𝑨𝒂𝒄𝒕𝒖𝒂𝒍 Loadideal=FE Ff = Loadideal -
𝑽𝑹 xVR FL
(N) (N)

© Department of Mechanical and Production Engineering, IUT


ME 4504: Mechanics of Machine Lab 4

Student ID:
Exp. Static and Dynamic balancing of a Shaft
05

Data Collection
Table-1
Plane Mass(m) Radius (r) Centrifugal Distance from Couple ÷ ⍵2
(1) (2) (3) force ÷ ⍵2 Plane L (l) (m.r.l)
(m.r) (5) (6)
(4)

Table-2
Plane Mass(m) Radius(r) Centrifugal Distance from Couple ÷ ⍵2
(1) (2) (3) force ÷ ⍵2 Plane L(l) (m.r.l)
(m.r) (5) (6)
(4)

© Department of Mechanical and Production Engineering, IUT


ME 4504: Mechanics of Machine Lab 5

Student ID:
Exp. Determination of Critical Speed of Shafts
06

Data Collection
π 4
Second moment of area of the shaft, I = D
4
Modulus of elasticity, E = 210 GPa.

Table 1:Value of Constant based on end condition.


End condition Constant, C
Free – Free 1.572
Fixed – Fixed 3.75
Cantilever 0.56
Fixed – Free 2.459

Table 2: Data table for Shaft – 1 (Dia. = 6 mm)

Dia. of Shaft Weight per Moment of


Observed nc Average nc Theoretical
No. of Obs. shaft D length l unit length area I
(rpm) (rpm) nc (rpm)
(mm) (mm) w (N/m) (mm4)

Table 3: Data table for Shaft – 2 (Dia. = 7 mm)

Dia. of Shaft Weight per Moment of


Observed nc Average nc Theoretical
No. of Obs. shaft D length l unit length area I
(rpm) (rpm) nc (rpm)
(mm) (mm) w (N/m) (mm4)

© Department of Mechanical and Production Engineering, IUT

You might also like