Scribd
Upload
3 views

code

The document contains an Arduino sketch that interfaces with an I2C LCD to display messages related to sign language. It reads analog inputs from four sensors and displays corresponding messages on the LCD based on their values. The program also controls an output pin to indicate different states such as 'Washroom', 'Drink Water', 'Food', and 'Fruit'.

Uploaded by

zakeerhusainkabadi
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
3 views

code

The document contains an Arduino sketch that interfaces with an I2C LCD to display messages related to sign language. It reads analog inputs from four sensors and displays corresponding messages on the LCD based on their values. The program also controls an output pin to indicate different states such as 'Washroom', 'Drink Water', 'Food', and 'Fruit'.

Uploaded by

zakeerhusainkabadi
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

// Eazytronic.

com
#include <Wire.h>

#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x3F,16,2);
// 0x3F address i2c
// 0x27 address i2c

void setup()
{
Serial.begin(9600);

lcd.init();

lcd.backlight();
lcd.setCursor(0,0);
lcd.print("SIGN LANGUAGE ");

pinMode(13,OUTPUT);
}
void loop()
{
int s1 = analogRead(A0);
int s2 = analogRead(A1);
int s3 = analogRead(A2);
int s4 = analogRead(A3);

Serial.println(s1);
Serial.println("washroom");

Serial.println(s2);
Serial.println("drink water");
Serial.println(s3);
Serial.println("food");
Serial.println(s4);
Serial.println("fruit");
//delay(3000);

if(s1 < 150)


{
digitalWrite(13,LOW);
Serial.println("WashRoom ");
lcd.setCursor(0,1);
lcd.print(" WASHROOM ");
delay(2000);
}

if(s2 < 200)


{
digitalWrite(13 , HIGH);
Serial.println("Dring Water ");
lcd.setCursor(0,1);
lcd.print(" DRINK WATER ");
delay(2000);
}

if(s3 < 150)


{
digitalWrite(13,LOW);
Serial.println("Food ");
lcd.setCursor(0,1);
lcd.print(" FOOD ");
delay(2000);
}

if(s4 < 130)


{
digitalWrite(13 , HIGH);
Serial.println("Fruit ");
lcd.setCursor(0,1);
lcd.print(" FRUIT ");
delay(2000);
}
else
{
Serial.println(" NOTHING ");
lcd.setCursor(0,1);
lcd.print(" NOTHING ");

}
}

You might also like