Chapter 1

Limits and Continuity

All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
LESSON 1: The Limit of a Function: Theorems and Examples
LEARNING OUTCOMES: At the end of the lesson, the learner shall be able to:

1. Illustrate the limit of a function using a table of values and the graph of the function;
2. Distinguish between lim f (x) and f (c);
x→c
3. Illustrate the limit theorems; and
4. Apply the limit theorems in evaluating the limit of algebraic functions (polynomial, ra-
tional, and radical).

2
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 TOPIC 1.1: The Limit of a Function
LIMITS

Consider a function f of a single variable x. Consider a constant c which the variable x will
approach (c may or may not be in the domain of f ). The limit, to be denoted by L, is the
unique real value that f (x) will approach as x approaches c. In symbols, we write this process
as
lim f (x) = L.
x→c

This is read, ‘ ‘The limit of f (x) as x approaches c is L.”

LOOKING AT A TABLE OF VALUES

To illustrate, let us consider

lim (1 + 3x).
x→2

Here, f (x) = 1 + 3x and the constant c, which x will approach, is 2. To evaluate the given limit,
we will make use of a table to help us keep track of the effect that the approach of x toward
2 will have on f (x). Of course, on the number line, x may approach 2 in two ways: through
values on its left and through values on its right. We first consider approaching 2 from its left
or through values less than 2. Remember that the values to be chosen should be close to 2.

x f (x)
1 4
1.4 5.2
1.7 6.1
1.9 6.7
1.95 6.85
1.997 6.991
1.9999 6.9997
1.9999999 6.9999997

Now we consider approaching 2 from its right or through values greater than but close to 2.

3
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 x f (x)
3 10
2.5 8.5
2.2 7.6
2.1 7.3
2.03 7.09
2.009 7.027
2.0005 7.0015
2.0000001 7.0000003

Observe that as the values of x get closer and closer to 2, the values of f (x) get closer and closer
to 7. This behavior can be shown no matter what set of values, or what direction, is taken in
approaching 2. In symbols,
lim (1 + 3x) = 7.
x→2

EXAMPLE 1: Investigate
lim (x2 + 1)
x→−1

by constructing tables of values. Here, c = −1 and f (x) = x2 + 1.

We start again by approaching −1 from the left.

x f (x)
−1.5 3.25
−1.2 2.44
−1.01 2.0201
−1.0001 2.00020001

Now approach −1 from the right.

x f (x)
−0.5 1.25
−0.8 1.64
−0.99 1.9801
−0.9999 1.99980001

The tables show that as x approaches −1, f (x) approaches 2. In symbols,

lim (x2 + 1) = 2.
x→−1

4
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 EXAMPLE 2: Investigate lim |x| through a table of values.
x→0

Approaching 0 from the left and from the right, we get the following tables:

x |x| x |x|
−0.3 0.3 0.3 0.3
−0.01 0.01 0.01 0.01
−0.00009 0.00009 0.00009 0.00009
−0.00000001 0.00000001 0.00000001 0.00000001

Hence,
lim |x| = 0.
x→0

EXAMPLE 3: Investigate
x2 − 5x + 4
lim
x→1 x−1
x2 − 5x + 4
by constructing tables of values. Here, c = 1 and f (x) = .
x−1
Take note that 1 is not in the domain of f , but this is not a problem. In evaluating a limit,
remember that we only need to go very close to 1; we will not go to 1 itself.

We now approach 1 from the left.

x f (x)
1.5 −2.5
1.17 −2.83
1.003 −2.997
1.0001 −2.9999

Approach 1 from the right.

x f (x)
0.5 −3.5
0.88 −3.12
0.996 −3.004
0.9999 −3.0001

5
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
The tables show that as x approaches 1, f (x) approaches −3. In symbols,

x2 − 5x + 4
lim = −3.
x→1 x−1

EXAMPLE 4: Investigate through a table of values

lim f (x),
x→4

if


x + 1 if x < 4
f (x) =
(x − 4)2 + 3 if x ≥ 4.

This looks a bit different, but the logic and procedure are exactly the same. We still approach
the constant 4 from the left and from the right, but note that we should evaluate the appropriate
corresponding functional expression. In this case, when x approaches 4 from the left, the values
taken should be substituted in f (x) = x + 1. Indeed, this is the part of the function which
accepts values less than 4. So,

x f (x)
3.7 4.7
3.85 4.85
3.995 4.995
3.99999 4.99999

On the other hand, when x approaches 4 from the right, the values taken should be substituted
in f (x) = (x − 4)2 + 3. So,

x f (x)
4.3 3.09
4.1 3.01
4.001 3.000001
4.00001 3.0000000001

6
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 Observe that the values that f (x) approaches are not equal, namely, f (x) approaches 5 from
the left while it approaches 3 from the right. In such a case, we say that the limit of the given
function does not exist (DNE). In symbols,

lim f (x) DNE.

x→4

Remark 1: We need to emphasize an important fact. We do not say that lim f (x) “equals
x→4
DNE”, nor do we write “ lim f (x) = DNE”, because “DNE” is not a value. In the previous
x→4
example, “DNE” indicated that the function moves in different directions as its variable ap-
proaches c from the left and from the right. In other cases, the limit fails to exist because it is
1
undefined, such as for lim which leads to division of 1 by zero.
x→0 x

Remark 2: Have you noticed a pattern in the way we have been investigating a limit? We
have been specifying whether x will approach a value c from the left, through values less than
c, or from the right, through values greater than c. This direction may be specified in the limit
notation, lim f (x) by adding certain symbols.
x→c

• If x approaches c from the left, or through values less than c, then we write lim f (x).
x→c−

• If x approaches c from the right, or through values greater than c, then we write lim f (x).
x→c+

Furthermore, we say
lim f (x) = L
x→c

if and only if
lim f (x) = L and lim f (x) = L.
x→c− x→c+

In other words, for a limit L to exist, the limits from the left and from the right must both
exist and be equal to L. Therefore,

lim f (x) DNE whenever lim f (x) 6= lim f (x).

x→c x→c− x→c+

These limits, lim f (x) and lim f (x), are also referred to as one-sided limits, since you only
x→c− x→c+
consider values on one side of c.

Thus, we may say:

• in our very first illustration that lim (1 + 3x) = 7 because lim (1 + 3x) = 7 and lim (1 +
x→2 x→2− x→2+
3x) = 7.

7
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 • in Example 1, lim (x2 + 1) = 2 since lim (x2 + 1) = 2 and lim (x2 + 1) = 2.
x→−1 x→−1− x→−1+

• in Example 2, lim |x| = 0 because lim |x| = 0 and lim |x| = 0.

x→0 x→0− x→0+

x2 − 5x + 4 x2 − 5x + 4
• in Example 3, lim = −3 because lim = −3 and
x→1 x−1 x→1− x−1
x2 − 5x + 4
lim = −3.
x→1+ x−1
• in Example 4, lim f (x) DNE because lim f (x) 6= lim f (x).
x→4 x→4− x→4+

LOOKING AT THE GRAPH OF y = f (x)

If one knows the graph of f (x), it will be easier to determine its limits as x approaches given
values of c.

Consider again f (x) = 1 + 3x. Its y = 1 + 3x

8
graph is the straight line with slope
3 and intercepts (0, 1) and (−1/3, 0). 7
(2, 7)
Look at the graph in the vicinity of
6
x = 2.

5
You can easily see the points (from
the table of values in page 4) 4
(1, 4), (1.4, 5.2), (1.7, 6.1), and so on,
approaching the level where y = 7. 3

The same can be seen from the right

2
(from the table of values in page 4).
Hence, the graph clearly confirms that
1

lim (1 + 3x) = 7.
x→2
−1 0 1 2 3 4 x

Let us look at the examples again, one by one.

Recall Example 1 where f (x) = x2 + 1. Its graph is given by

8
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 y
8

7 y = x2 + 1
6

3
(−1, 2) 2

−3 −2 −1 0 1 2 3 x

It can be seen from the graph that as values of x approach −1, the values of f (x) approach 2.

Recall Example 2 where f (x) = |x|.

y
y = |x|

(0, 0) x

It is clear that lim |x| = 0, that is, the two sides of the graph both move downward to the
x→0
origin (0, 0) as x approaches 0.

x2 − 5x + 4
Recall Example 3 where f (x) = .
x−1

9
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 y
x2 − 5x + 4
y=
0 x−1
1 2 3 4 x

−1

−2

−3
(1, −3)
−4

x2 − 5x + 4 (x − 4)(x − 1)
Take note that f (x) = = = x − 4, provided x 6= 1. Hence, the
x−1 x−1
graph of f (x) is also the graph of y = x − 1, excluding the point where x = 1.

Recall Example 4 where 

x + 1 if x < 4
f (x) =
(x − 4)2 + 3 if x ≥ 4.

y
y = f (x)
7

6
(4, 5)
5

3
(4, 3)
2

0 1 2 3 4 5 6 7 x

Again, we can see from the graph that f (x) has no limit as x approaches 4. The two separate
parts of the function move toward different y-levels (y = 5 from the left, y = 3 from the right)
in the vicinity of c = 4.

10
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 So, in general, if we have the graph of a function, such as below, determining limits can be done
much faster and easier by inspection.

4
(3, 4)
3
(0, 3)

2
(3, 2)

1
(−2, 1) (3, 0)
−3 −2 −1 0 1 2 3 4 5 6 x

For instance, it can be seen from the graph of y = f (x) that:

a. lim f (x) = 1.
x→−2

b. lim f (x) = 3. Here, it does not matter that f (0) does not exist (that is, it is undefined, or
x→0
x = 0 is not in the domain of f ). Always remember that what matters is the behavior of
the function close to c = 0 and not precisely at c = 0. In fact, even if f (0) were defined
and equal to any other constant (not equal to 3), like 100 or −5000, this would still have no
bearing on the limit. In cases like this, lim f (x) = 3 prevails regardless of the value of f (0),
x→0
if any.

c. lim f (x) DNE. As can be seen in the figure, the two parts of the graph near c = 3 do not
x→3
move toward a common y-level as x approaches c = 3.

Solved Examples
LOOKING AT TABLES OF VALUES

EXAMPLE 1: Determine lim x3 − 1 .

x→1

Solution. Approaching x = 1 from the left,

11
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 x f (x)
0.9 −0.271
0.99 −0.029701
0.999 −0.002997001
0.9999 −0.00029997
0.99999 −0.0000299997

Now, taking values from the right of x = 1,

x f (x)
1.1 0.331
1.01 0.030301
1.001 0.003003001
1.0001 0.00030003
1.00001 0.0000300003

Thus, lim x3 − 1 = 0.


x→1

EXAMPLE 2: Determine lim |x + 2|.

x→0

Solution. Taking values from the left of 0,

x f (x)
−0.1 1.9
−0.05 1.95
−0.01 1.99
−0.005 1.995
−0.001 1.999

Approaching 0 from the right,

12
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 x f (x)
0.1 2.1
0.05 2.05
0.01 2.01
0.005 2.005
0.001 2.001

Thus, lim |x + 2| = 2.
x→0

EXAMPLE 3: Given 
2x − 3 , x ≤ 4,
f (x) =
x2 − x + 1 , x > 4.
Evaluate lim f (x).
x→4

Solution. Approaching x = 4 from the left,

x f (x)
3.9 4.8
3.95 4.9
3.99 4.98
3.995 4.99
3.999 4.998

Taking values from the right of 4,

x f (x)
4.1 13.71
4.05 13.3525
4.01 13.0701
4.005 13.035025
4.001 13.007001

Hence, lim f (x) DNE. .

x→4

13
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
LOOKING AT GRAPHS OF FUNCTIONS

EXAMPLE 4: Recall Example 1, where f (x) = x3 − 1 and whose graph is as follows:

x
(1, 0)
y = x3 − 1

Solution. It is clear from the graph that lim x3 − 1 = 0.

.
x→1

EXAMPLE 5: Recall Example 2, where f (x) = |x + 1|. Its graph is as follows:

y = |x + 2|

(0, 2)

Solution. It is clear from the graph above that lim |x + 2| = 2. .

x→0

14
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 EXAMPLE 6: Recall Example 3, where

2x − 3 , x ≤ 4,
f (x) =
x2 − x + 1 , x > 4,

and whose graph is as follows:

(4, 13)

(4, 5)

Solution. From the graph above, lim f (x) = 5 and lim f (x) = 13. Hence, lim f (x) DNE. .
x→4− x→4+ x→4

15
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
EXAMPLE 7: Now, consider the following graph of function:

(3, 6)
(0, 5)

(3, 3)

(−2, 3)
(3, 2)

Solution. From the graph,

1. lim f (x) = 3,
x→−2
2. lim f (x) = 5,
x→0
3. lim f (x) DNE.
x→3

Supplementary Problems

1. Using tables of values, determine the limits of the following.

(a) lim (x) (i) lim (x3 + 1)

x→0 x→1
(b) lim )2x)
x→1
(j) lim (1 − x2 − x3 )
x→0
(c) lim (−x + 1) p
x→2 (k) lim x3 − 1
(d) lim (1 − x) x→1
p
x→−1
(l) lim x2 − x3
(e) lim (2x − 1) x→0
x→0 p
(f) lim (x − 3) (m) lim x4 − x2 + 1
x→3 x→1
x
(g) lim (3x2 − 2) (n) lim
x→2 x→0 1 − x
(h) lim (5 − x − x2 ) 1 − x2
x→0 (o) lim
x→1 x + 1

16
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.
 2. The graph of f (x) is given by

(−1, 4) (1, 4)

(−1, −2)
(5, −2)

(3, −4)
(−4, 5)

Determine the following limits.

(a) lim f (x)

x→−4
(b) lim f (x)
x→−1
(c) lim f (x)
x→1
(d) lim f (x)
x→3
(e) lim f (x)
x→5

17
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means -
electronic or mechanical including photocopying – without written permission from the DepEd Central Office. First Edition, 2017.