SAUDIARAMCO.

NOTES:
WELLHEAD GAS COMPOSITION FOR HSBH GAS FIELD 1. ALL DIMENSIONS ARE IN MILLIMETER.
EQUIPMENT LIST LEGEND
GRID 2. ALL ELEVATIONS ARE IN METERS AND REFER TO
PROCESS GAS COMPOSITION (DRY BASIS) PROCESS GAS COMPOSITION (DRY BASIS) LOWEST ASTRONOMICAL TIDE (LAT) DATUM.
CLASS I, ZONE 0, GAS GROUP IIA & IIB, TEMPERATURE
EQUIPMENT NO. DESCRIPTION SIZE (CAPACITY) REMARKS CLASS T3 ( MINIMUM IGNITION TEMP OF 260°C), 3. THIS DRAWING SHALL BE READ IN CONJUNCTION
AUTO IGNITION TEMPERATURE AUTO IGNITION TEMPERATURE
COMPONENT Mol% COMPONENT Mol% L x W x H ELECTRICAL AREA AS PER API 505. WITH ELECTRICAL AREA CLASSIFICATION SCHEDULE
CLASS CLASS DOC. NO. AA-038675.
PLT CLASS I, ZONE 1, GAS GROUP IIA & IIB, TEMPERATURE
D-2003 FLARE KO DRUM ID 1270 x T/T 2845

OF
NTH H2O 0 - - H2O 0.00 - - CLASS T3 ( MINIMUM IGNITION TEMP OF 260°C), 4. FOR THE PURPOSE OF ELECTRICAL AREA
L-2001 FLOWLINE SCRAPER LAUNCHER (22"X16") 8635 x OD 559 x 406 -
N2 11.41 - - N2 6.26 - - ELECTRICAL AREA AS PER API 505. CLASSIFICATION, ALL THE DECKS ARE CONSIDERED

CONSENT
PREVAILING WIND G-2001A/B MEG INJECTION PUMPS 6225 x 2220 x 2804 - GRATED AND AREA CLASSIFICATION IS EXTENDED
CO2 7.07 - - CO2 7.53 - - CLASS I, ZONE 2, GAS GROUP IIA & IIB, TEMPERATURE
TO BELOW DECKS BASED ON THE HAZARD RADIUS.
CLASS T3 ( MINIMUM IGNITION TEMP OF 260°C),
H2S 4.77 260 T3 H2S 4.02 270 T3 U-2004 A/B NITROGEN BOTTLES RACK 1322 x 1020 x 2200 -
ELECTRICAL AREA AS PER API 505. 5. TEMPERATURE CLASS OF ALL THE ELECTRICAL AND
C1 73.24 595 T1 C1 81.88 630 T1 U-2006 MONORAIL HOIST 1350 x 1250 x 1000 (10 MT) - INSTRUMENTATION EQUIPMENT SHALL MEET THE
CLASS I, ZONE 1, GAS GROUP IIA & IIB, TEMPERATURE
TEMPERATURE CLASS (MINIMUM T3) OF THE AREA
C2 2.29 515 T1 C2 0.22 472 T1 TR-001 ICCP TRANSFORMER RECTIFIER-1 2985 x 1162 x 1360 - CLASS T3 (MINIMUM IGNITION TEMPERATURE OF 260°C),

TTEN
WHERE THEY ARE INSTALLED.
C3 0.5 470 T1 C3 0.03 450 T1 HAZARDOUS AREA AS PER API-RP-505 - EXPECTED
TR-002 ICCP TRANSFORMER RECTIFIER-2 2985 x 1162 x 1360 - 6. PRODUCTION GAS IS LIGHTER THAN AIR (DENSITY TO
DURING WIRE LINING OPERATION.
i-C4 0.11 - - n-C4 0.01 288 T3

WRI
AIR IS ABOUT 0.7) THEREFORE HAZARDOUS AREA
K-2001A HVAC UNIT A 3023 x 2235 x 2387 -
CLASS I, ZONE 2, GAS GROUP IIA & IIB, TEMPERATURE CLASSIFICATION ENVELOPES ARE NOT EXTENDED
n-C4 0.16 365 T2 C6 0.01 235 T3
3023 x 2235 x 2387 - CLASS T3 (MINIMUM IGNITION TEMPERATURE OF 260°C), DOWN TO THE FIRST SOLID DECK BELOW THE LEAK
K-2001B HVAC UNIT B
i-C5 0.08 - - C7+ 0.01 204 T3 HAZARDOUS AREA AS PER API-RP-505 - EXPECTED

THE
SOURCE AS GAS IS NATURALLY BUOYANT. HAZARDOUS
n-C5 0.06 - - GAS MIXTURE 100 270 T3 CP-003 HYDRAULIC ESD PANEL - - DURING WIRE LINING OPERATION. AREA ENVELOPES EXTENSION IS LIMITED TO THE

JB-003 NEGATIVE JUNCTION 525 x 260 x 1675 - HAZARDOUS RADIUS DEFINED BY API 505 STANDARD
C6 0.08 230 T3 CLASS I, ZONE 2, GAS GROUP IIA & IIB, TEMPERATURE

THOUT
ONLY.
CLASS T3 (MINIMUM IGNITION TEMPERATURE OF 260°C),
C7 0.08 204 T3 JP-004 NEGATIVE JUNCTION 525 x 260 x 1675 -
HAZARDOUS AREA AS PER API-RP-505 (FUTURE). 7. THE AREA SURROUNDING SAMPLE AND INSTRUMENT
C8 0.05 - - LP-002 LIGHTING PANEL 2200 x 450 x 1700 - DRAIN VALVES, GAUGE VALVES SHALL BE

WI
UNCLASSIFIED AREA. UNCLASSIFIED AS PER SECTION 10.15.3.1 OF API
C9 0.03 - - -
PP-001&005 480V AC POWER PANEL 2200 x 450 x 1700
RP 505.

NG
C10+ 0.07 - -
PP-008&009 400/230V AC POWER PANEL 2200 x 450 x 1700 - 8. THE AREA SURROUNDING THE FINAL DISCHARGE

DRAWI
GAS MIXTURE 100 260 T3 POINTS OF SAMPLE AND INSTRUMENT DRAIN VALVES,
SW-003&004 LIGHTING SWITCH - -
GAUGE VALVES SHALL BE CLASSIFIED ZONE 2 FOR
1.5 METERS AS PER SECTION 10.15.3.2 OF API
RP 505.

S
THI
9. A ZONE 2 WITH HAZARD RADIUS OF 2000 MM SHALL
BE CONSIDERED AROUND FLANGES AND VALVES
HANDLING HYDROCARBON AT HIGH PRESSURE.

FROM
10.A ZONE 1 WITH HAZARD RADIUS OF 1500 MM AND
ZONE 2 WITH HAZARD RADIUS OF 3000 MM SHALL
BE CONSIDERED AROUND LAUNCHER DOOR AND VENT.

NED
B A 11.THE DRIP PAN/DRAIN TROUGH SHALL BE CLASSIFIED
ZONE 1 INSIDE AND ZONE 2 FOR 0.5 METERS FROM

OBTAI
THE EDGE.

1600 14700 10700 12500

BE
SCRAPER LAYDOWN

PART,SHALL
R3000
AREA REFERENCE DRAWINGS
R1500
U-2006 EQUIPMENT LAYOUT FOR MAIN DECK AA-038483
DRAIN GUTTER TR-001
R2000 MONORAIL-10MT DRIP PAN
R2000 R2000 R2000 R2000 R2000
R2000 R2000

HANDLING/ESCAPE WAY

ACCESS W AY

ACCESS W AY

N
R2000

I
JB-004

FULL,OR
TR- 002
L-2001
4600

22"x16" SCRAPER LAUNCHER

DRIP PAN JB-003

N
I
R3000 R2000
ACCESS WAY
ACCESS WAY

ON
REPRODUCTI
2

ACCESS W AY
D- 2003
R2000
REMOVABLE HANDRAIL R3000
R3000

K- 2001A
ACCESS W AY
5350

ACCESS W AY

ACCESS W AY

ACCESS W AY

ACCESS W AY

ACCESS W AY
(FUTURE) KEY PLAN
MAIN DECK

SAUDIARAMCO.NO
SLOPE

ACCESS W AY
NG/ESCAPE W AY

X-2001/2002 SPARE 1
C

ACCESS W AY
L X-2002 X-2001
WELLHEAD XTREE
100

EL(+) 13.500m TOS HP

DECK

PLT
1:

NG/ESCAPE W AY
NTH
R2000
DRILL DECK R2000
PREVAILING WIND
SLOPE

K- 2001B
HANDLI
100

R2000
B A
1:

R3000

OF
ACCESS WAY
DECK

X-2003/2004 SPARE 2 PP-001&005

HANDLI
C

SCRAPER CRADDLE STORAGE

L

PROPERTY
X-2004 X-2003
5350

WELLHEAD XTREE
R2000

AREA (5000x1500)
(FUTURE)
CP-003 R2000 2
SW-003&004
ACCESS WAY

R3000 STAIRS FROM

UP
DATUM POINT CELLAR DECK MAIN DECK

UP
DRILL DECK STAIRS TO

SOLE
FRAME MEZZ DECK
E 200000
1 1
ACCESS W AY

R3000 PP

THE
R3000
HANDLING/ESCAPE WAY -008&009

HANDLING/ESCAPE WAY LP-002

ARE
4600

G-2001B G-2001A
THIS DRAWING

N
HEREI
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0
LAYDOWN AREA
U-2004A/B
2.7m X 2.0m
METERS
ACCESS WAY
HANDLING/ESCAPE WAY

NED
SCALE: 1 :75M

CONTAI
DRAIN GUTTER
100000

REVISION VALIDATION

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

ON
N

30004827-1018-105

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) x REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

MAIN DECK RAK

10/23/18
RSS
10/23/18
RAK
10/23/18
RSS
09/30/18

REV.NO. DATE REVISION DESCRIPTION

EL(+) 13.500m TOS HP

I
00 09/30/18 NEW STANDARD DRAWING

THE
JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
30004827 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
DRAWING TYPE

ELECTRICAL AREA CLASSIFICATION STD

NG
MAIN DECK

DRAWI
ALL EQUIP, INSTRUMENT 4 WELL STD. GAS PLATFORM-HSBH/ARBI
AND PIPING TAG
NUMBERS ARE PRECEDED
BY PREFIX NO. STD. DWG. SAUDI ARABIA

S
PLATFORM PREFIX NO. PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
XX 990 B AA-038674 004 00
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05