Scribd
Upload
7 views6 pages

Set B

The document is a quiz for the course 'Introduction to Electrical Engineering' at the Indian Institute of Technology Delhi, consisting of 15 questions covering various electrical engineering concepts. Each question carries equal marks, and the total marks for the quiz are 15. The quiz is scheduled for 06-09-2024, with a duration of 45 minutes.

Uploaded by

adarshachandra001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views6 pages

Set B

The document is a quiz for the course 'Introduction to Electrical Engineering' at the Indian Institute of Technology Delhi, consisting of 15 questions covering various electrical engineering concepts. Each question carries equal marks, and the total marks for the quiz are 15. The quiz is scheduled for 06-09-2024, with a duration of 45 minutes.

Uploaded by

adarshachandra001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

INDIAN INSTITUTE OF TECHNOLOGY DELHI

INTRODUCTION TO ELECTRICAL ENGINEERING


| ELL101 QUIZ-1 ||

NAME: ENTRY NO:


DATE: 06-09-2024 (3:30 pm to 4:20 pm) DURATION: 45 min
Total marks: 15
Each question carries equal marks.

1. The current waveform in an inductor is as shown below. The voltage waveform, across
the inductor, is:

(a) (c)

(b)
(d)

2. Let the circuit shown be initially relaxed (No charge, no current) and the switch be
closed at t=0. Find the total impedance of the circuit seen by the voltage source.

2
(a) 1 (c)
3
3
(b) 4
2 (d) 3

3. Determine the power being absorbed by the circuit element at t=5µs.


(a) -1.82 (c) 1.82
(b) -25.58 (d) 25.58

4. Assume capacitor C2 is initially uncharged and capacitor C1 is charged to 5V. The


switch K is closed at t=0. What is the current in R1 at t= 0 +.

(a) 10A (c) 5A


5
(b) A 5
2 (d) A
4
5. When no load is connected to a dc generator its terminal voltage is 120V. When
delivering a current of 37.5A, the terminal voltage drops to 105V. Find the Norton
equivalents.
(a) 𝐼𝑁 = 30𝐴, 𝑅𝑁 = 0.2Ω (c) 𝐼𝑁 = 300𝐴, 𝑅𝑁 = 0.2Ω
(b) 𝐼𝑁 = 300𝐴, 𝑅𝑁 = 0.4Ω (d) 𝐼𝑁 = 30𝐴, 𝑅𝑁 = 0.4Ω

6. A network with independent sources and resistors shown below has a Thevenin voltage
18V and Thevenin resistance 6Ω. The Norton equivalent current IN and resistance RN,
respectively, are:

(a) 3mA, 6Ω (c) 3A, 4kΩ


(b) 5A, 15Ω (d) 3A, 6Ω

7. In the circuit below, R = 0 and i1 and i2 are unknown. Find i.


(a) -8A (c) 8A
(b) 8⁄7A (d) −8⁄7A

8. In the given circuit, superposition is applied. When V2 is set to 0V, the current I2 is −5 A.
When V1 is set to 0V, the current I1 is +10 A. What will the current I3 when both of the
sources will be applied?

(a) 5.43A (c) 2A


(b) 1.5A (d) 3.34A

9. Find the Thevenin’s equivalent resistance between point a and b.

(a) 7.66Ω (c) 5.12Ω


(b) 2.23Ω (d) 3.78 Ω

10. Find the voltage Vab in the network shown below.


(a) 5V (c) -3V
(b) -5V (d) 3V

11. The reactance offered by a capacitor to alternating current of frequency ‘f’ is -10 Ω. If
the frequency is changed to operate at ‘4f’, then the capacitive reactance would be:
(a) -40Ω (c) -5Ω
(b) -20Ω (d) -2.5Ω

12. In the figure below, the switch is closed at t = 0. The capacitor has no charge for t < 0.
The plot for 𝑣𝑐 (𝑡), for 𝑡 ≥ 0 is:

(c)
(a)

(d)
(b)

2𝜋
13. If current in a device is i = 10 cos (300t - ) when a voltage V= 30 sin (300t) is applied
8
across it. The impedance of the device is:
(a) 3 ∠ 22.5 (c) 3 ∠ -45
(b) 3 ∠ -22.5 (d) 3 ∠ 45
14. A series RC circuit, with R = 5kΩ and C = 20mF, has a voltage source as shown:

where T = 200s. Choose the correct plot for voltage across capacitor for 𝑡 ≥ 0.
(a) (c)

(b) (d)

T T

15. For the circuit below, the capacitor is initially uncharged.

The switch is first moved to the charging position 1 and then to the discharging position
2, yielding the current shown below. The capacitor fully charges in 10 seconds.

Determine the values of E and R2.


(a) 𝐸 = 36𝑉, 𝑅2 = 4𝐾Ω (c) 𝐸 = 90𝑉, 𝑅2 = 15𝐾Ω
(b) 𝐸 = −36𝑉, 𝑅2 = 4𝐾Ω (d) 𝐸 = 90𝑉, 𝑅2 = 21.6𝐾Ω
Answer Key

1. (b) 2. (d) 3. (b) 4. (c) 5. (b)

6. (d) 7. (a) 8. (d) 9. (b) 10. (c)

11. (d) 12. (d) 13. (c) 14. (c) 15. (a)

You might also like