2132

2116
MODELS PID Temperature Controllers
Ideal for Available in compact 1/32 and 1/16 DIN panel sizes, the 2100
series uses advanced PID algorithms to give stable ‘straight
· small ovens line’ temperature control.
Self tuning is included to optimise the control performance
· chillers without the need for specialist knowledge or training.
· sterilisers A universal input allows selection of nine internally stored
· trace heating thermocouple types and the Pt100 resistance thermometer.
Other input linearisations may be factory downloaded. Linear
· heat sealing inputs can be scaled to the desired display range.
Two outputs are configurable for heating, cooling or alarms.
Three internal alarm setpoints are provided, configurable as
high, low or deviation alarms. Alarms can be ‘blocked’ on
start-up to prevent unnecessary operator alerts.
Heater failure can be detected when the controller is used
with a TE10S Solid State Relay.
Tactile buttons ensure positive operation.
The operator interface can be customised to present only
Specifications those parameters that an operator needs to see and adjust,
while all other parameters are locked away under password
Dimensions:
protection.
Model 2132:
48W x 24H x 103D mm
Timer functionality
Model 2116:
48W x 48H x 103D mm
Control modes: Temperature Dwell Time

PID or On/Off Setpoint

Supply voltages:
85-264Vac, 5.0watts max.
Ramp
20-29Vac or dc, 5.0watts Control
maximum
Operating ambient: Switch off
Time

0-55°C, 0-90%RH non-

condensing
Inputs:
Nine standard
thermocouple types.
Pt100. 4-20mA linear.
Custom input available
Output ratings:
Relay: 2A, 264Vac resistive
Logic: 9Vdc, 18mA
Panel sealing:

abc
IP65, plug-in from front
panel
Rear terminal connections
Model 2132 Model 2116
External
Relay
Module

1B 1A
Low voltage supply

OR 24
20-29Vac/dc
Solid Model 2116 L Line
State 24
85-264Vac
Relay
N Neutral
Output 1
(Logic)
External AA
Output 2
Relay
1B 1A Model 2132 Module AB
(Relay)

- +
1A + V+
Output 1 1A
Solid
OR State
(Logic) 2.49‰ Sensor
Relay V-
V- V+ AB AA N L 1B 1B - inputs
T/C PT100 mA Input
T/C Output 2 Neutral Line
(Relay) 85-264Vac

PT100
20-29Vac/dc

mA Input 24 24

2.49‰ Low voltage supply

Sensor inputs

Ordering codes
Model Supply Output 1 Output 2 Sensor Setpoint Setpoint Ext. Relay Input
Function Manual Units
Number Voltage (Logic) (Relay) Input Min Max Module Adaptor

note 2 note 2

Model Number Output 1 (Logic) Output 2 (Relay) Sensor Input Setpoint Min Setpoint Max

2132 48x24mm unit XX No function XX No function Standard Sensor Inputs Min °C Max
2116 48x48mm unit Logic output RH Heating
RC Cooling J J Thermocouple -210 1200
LH Heating
Function FH High alarm 2 K K Thermocouple -200 1372
LC Cooling
M1 PDS heater break FL Low alarm 2 T T Thermocouple -200 400
CC PID Controller detect (note 1) AL High alarm 2 & low L L Thermocouple -200 900
NF On/Off Controller FH High alarm 1 alarm 3 N N Thermocouple-Nicrosil/Nisil -200 1300
TC PID Controller +Timer FL Low alarm 1 DB Dev. band alarm 2 -50 1768
R R Thermocouple-Pt/Pt13%Rh
TN On/Off Contr’ + Timer DB Dev. band alarm 1 DL Dev. low alarm 2
DH Dev, high alarm 2 S S Thermocouple-Pt /Pt10%Rh -50 1768
DL Dev. low alarm 1
NW New alarm B B Thermocouple-Pt/Pt30%Rh -6%Rh 0 1820
Supply Voltage DH Dev, high alarm 1
NW New alarm P Platinel II Thermocouple 0 1369
Logic input Z RTD/PT100 DIN 43760 -200 850
VH 85-264Vac
VL 20-29V dc or ac
AC Alarm ack/reset Factory Downloaded Input Min °C Max
KL Keylock C C Thermocouple - W5%Re/W26%Re (Hoskins) 0 2319
TM Timer Off/On D D Thermocouple - W3%Re/W25%Re 0 2399
Manual
Note 1. PDS heater break detect will E E Thermocouple -200 1000
XXX No manual transmit the power demand to a 1 Ni/Ni18%Mo Thermocouple 0 1399
ENG English TE10S Solid State Relay and read 2 Pt20%Rh/Pt40%Rh Thermocouple 0 1870
FRA French back a heater break alarm. 3 W/W26%Re (Engelhard) Thermocouple 0 2000
GER German 4 W/W26%Re (Hoskins) Thermocouple 0 2010
NED Dutch
Note 2. Setpoint min and max : Include the
decimal position required in the 5 W5%Re/W26%Re (Engelhard) Thermocouple 10 2300
SPA Spanish
SWE Swedish displayed value. Up to one for 6 W5%Re/W26%Re (Bucose) Thermocouple 0 2000
ITA Italian temperature inputs, up to two for 7 Pt10%Rh/Pt40%Rh Thermocouple 200 1800
process inputs. 8 Exergen K80 I.R. pyrometer -45 650
Note 3. An external 1% current sense Process Inputs (Scaled to setpoint min and max) Min °C Max
resistor is supplied as standard. If M -9.99 to +80mV linear -1999 9999
greater accuracy is required specify Y 0 to 20mA linear (note 3) -1999 9999
‘A1’ in the Input Adaptor field. A 4 to 20mA linear (note 3) -1999 9999
V 0 to 10Vdc linear (Input adaptor required) -1999 9999
Example ordering code
Units Ext. Relay Module Input Adaptor
2132- CC - VH - ENG - LH - RC - K - 0 - 1000 - C - XX - XX
C Celsius XX Not fitted XX Not fitted
2132, Controller, 85 to 264Vac, English manual, Logic heating, F Fahrenheit R7 Fitted (Operated by V1 0-10Vdc
Relay cooling, Type K thermocouple, 0 to1000°C, no options K Kelvin the logic output) A1 0-20mA or 4-20mA
UK SALES OFFICE X Linear input 0.1% current sense
resistor (2.49Ω)
Eurotherm Ltd
Faraday Close Durrington Worthing BN13 3PL United Kingdom
Sales and support: Tel. +44 (0)1903 695888 Fax +44 (0)1903 695666
Sales and support in over 30 countries worldwide EUROTHERM LIMITED
Enquiries/orders to:
Eurotherm Ltd Faraday Close Durrington
http://www.eurotherm.co.uk
Worthing BN13 3PL United Kingdom Part No. HA027217 Iss. 1
Tel. +44 (0)1903 268500 Fax +44 (0)1903 265982 © Copyright Eurotherm Limited 2000