AISSM’S College of Engineering, Pune

Class-FE Subject-Engineering Graphics

Question Bank
Unit No. 02 Projection of Plane
Sr.
Question Exam
No.
Projection of triangle [12/13 Marks]
An equilateral triangle of 60 mm side is resting in HP on one of its side. Then its surface is
June
1 inclined to HP at an angle of 40°. Draw the projections of plane, if the resting side is inclined
13
to VP at an angle of 30°. Find the inclination made by plane with VP.
A triangle ABC [AB = 40mm, BC = 60 mm, and angle ABC = 900] is resting in HP on its
side AB. Then its surface is inclined to HP in such a way that the point C is 39 mm above June
2
HP. Draw the projections if the resting side is inclined at an angle of 200 with VP. Find the 13
inclination made by the plane with VP.
An isosceles triangle, base 50 mm and altitude 80 mm, is resting in HP on its base. Its surface
3 is inclined to HP so that the corner opposite to resting side is 50 mm above HP. Draw the June
projections if its resting side is inclined to VP at an angle of 45°. Find inclinations made by 14
the plane with HP and VP
A triangle ABC [AB = 40mm, BC = 60 mm, and angle ABC = 900] is resting in HP on its
side AB. Then its surface is inclined to HP in such a way that the point C is 40 mm above June
4
HP. Draw the projections if the resting side is inclined at an angle of 200 with VP. Find the 15
inclination made by the plane with VP.
An equilateral triangle of 60 mm side is resting in HP on side AB. Then its surface is inclined
Dec
5 to HP at 40°. Draw the projections if points B & C are 10mm & 60mm infront of VP respt.
15
Find inclination made by the plate with VP.
Projection of rectangles [12/13 Marks]
A thin rectangular plate of size 70 mm × 40 mm appears as a square of side 40 mm in TV
June
6 with one of its side inclined at 30º to VP and parallel to HP. Draw the projection of the plate
15
and determine its inclination with HP.
Projection of Pentagon [12/13 Marks]
A pentagonal Plate of 40 mm side is resting on HP on one of it’s sides such that the corner
June
7 opposite to it is 25mm above HP. The side in HP makes an angle of 200 with VP. Draw its
16
Projection & find its inclination with HP & VP.
A pentagonal plate of side 40 mm, is resting in HP on its side. Then its surface makes 40°
Dec
8 with HP. Draw the projections if its resting side is inclined to VP at an angle of 45°. Find
14
inclination made by the plane with VP.
Projection of hexagon [12/13 Marks]
A hexagonal plate, base side 50mm, is resting in HP on one of it’s corner with it’s side parallel
to VP. Then, its surface is inclined to HP so that the corner opposite to resting corner is 51mm
Dec
9 above HP. Draw the projection , if its top view line passing through resting corner & it’s
12
opposite corner ,is inclined to VP at an angle of 350 .Also ,find the inclination made by the
plate with VP.
A hexagonal plate, base side 50mm, is resting in HP on one of its corner with it’s side parallel
to VP. Then, its surface is inclined to HP at 400 .Draw the projections, if it’s top view line
10 passing through resting corner & its opposite corner ,is inclined to VP at an angle of 35 0 , Dec
Also ,find the inclination made by the plate with VP. 13

Prof. Gade S.T. Academic Year-2024-25

 AISSM’S College of Engineering, Pune
Class-FE Subject-Engineering Graphics
Question Bank
Projection of circular lamina [12/13 Marks]
A circular lamina of diameter 60mm is resting in HP on one of its 13 circumferential point.
Then, its surface is inclined to HP at an angle of 450. Draw the projections of lamina, if the June
11
top view of a diameter line passing through the resting point makes 350 with VP. Find the 13
true inclination made by the lamina with VP.
A circular lamina of diameter 60 mm is resting in HP on one of its circumferential point.
Then, its surface is inclined to HP at an angle of 45°. Draw the projections of lamina, if the June
12
top view of a diameter line passing through the resting point makes 45° with VP. Find the 15
true inclination made by the lamina with VP.
A circular plate of diameter 60mm is resting on HP. It is then inclined to HP. So that the
Point opposite to resting points is 40mm above HP. Draw the projections if the plan of June
13
diameter line passing through resting points makes 350 with XY. Find inclinations made by 17
the plate with reference planes.
0
14 A circle of 50mm diameter is resting on HP on end A of is diameter AC which is 30 inclined Dec
0
to HP while it makes 45 inclined to VP. Draw its projections. 15

Prof. Gade S.T. Academic Year-2024-25