Scribd
Upload
53 views5 pages

DIBOND Series - Safety Data Sheet (EN)

The Safety Data Sheet for DIBOND® provides essential information on the product's identification, hazard classification, chemical composition, and safety measures. DIBOND® is a polyethylene/aluminum laminated construction material that is not considered a health hazard in its sold form, but may release hazardous fumes or dust if processed improperly. It includes guidelines for first aid, fire fighting, handling, storage, exposure controls, and regulatory information, including compliance with California Proposition 65 and RoHS standards.

Uploaded by

scribdniko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views5 pages

DIBOND Series - Safety Data Sheet (EN)

The Safety Data Sheet for DIBOND® provides essential information on the product's identification, hazard classification, chemical composition, and safety measures. DIBOND® is a polyethylene/aluminum laminated construction material that is not considered a health hazard in its sold form, but may release hazardous fumes or dust if processed improperly. It includes guidelines for first aid, fire fighting, handling, storage, exposure controls, and regulatory information, including compliance with California Proposition 65 and RoHS standards.

Uploaded by

scribdniko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Safety Data Sheet

DIBOND ®

REVISION: 8 DOCUMENT CODE: BEN--PRO1-305

Section I Product Identification


Manufacturer: 3A Composites USA, Inc.
208 W. 5th Street, P.O. Box 507
Benton, KY 42025
(270) 527-4200
Emergency Phone Number: 1-800-424-9300 Chemtrec
To be used only in the event of chemical emergencies involving
a spill, leak, fire, and exposure accidents involving chemicals.
Trade Name: DIBOND®
Synonym: Polyethylene / Aluminum Laminated Construction

Section II Hazard Identification

DIBOND® is defined as an article under the OSHA Hazard Communications standard. The standard
applies to “chemicals” but it does not apply to any substance, which is an “article”. The term “article” is
defined in the OSHA warning rule, as a manufactured item: 1) which is formed to a specific design during
manufacture, 2) which has end use function(s) dependent in whole or in part upon its’ shape or design
use during end use, and 3) which does not release, or otherwise result in exposure to hazardous
chemical under normal conditions of use.

Section III Chemical Composition


Ingredients CAS Number Percent (%) by weight
(Common Name)

Polyethylene 9002-88-4 39-72

Aluminum 7429-90-5 28-61

*Concentration of ingredients depends upon thickness of material.

Section IV First Aid Measures


This product is not considered to be a health hazard in the form in which they are sold (sheet, panel).
However, if these products are abraded, melted, welded, cut or processed in any manner that causes
release of fumes or dusts, hazardous levels of fumes or dusts may be generated from this product.

If contact with skin or eyes, wash immediately under water for at least 15 minutes.
For inhalation exposure, remove to fresh air. Contact a physician.

Section V Fire Fighting Measures

UNCONTROLLED WHEN PRINTED


Safety Data Sheet
DIBOND ®

REVISION: 8 DOCUMENT CODE: BEN--PRO1-305

Extinguishing media: Water, foam, CO2, dry chemical powder


Special firefighting procedure: self-contained breathing apparatus should be worn.
Thermal decomposition: May produce water, carbon monoxide, carbon dioxide, and
smoke upon combustion

Section VI Accidental Release

A release should not occur. However, if this product is abraded, melted or cut, dusts may be generated.
Should a release of dusts occur, contain by blocking routes to surface water and grassy areas. Clean up by
sweeping and depositing into a closed container.

PPE Requirements: Safety glasses, dust respirator and gloves.

Section VII Handling and Storage


Storage and handling precautions: Store in a flat dry area
Exercise caution in handling all edges.

Section VIII Exposure Controls


These products are not considered to be a health hazard in the form in which they are sold (sheet, panel).
However, if these products are abraded, melted, welded, cut or processed in any manner that causes
release of fumes or dusts, hazardous levels of fumes or dusts may be generated from these materials or
constituents of these materials. Aluminum fumes or dust are subject to the reporting requirements of
section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part
372.

Ingredient OSHA Exposure Limit ACGIH


Total Respirable TLV
Polyethylene 10mg/m3 5mg/m3 N.E.
Aluminum 15mg/m3 5mg/m3 N.E.

Effects of overexposure:
Acute: Physical irritation of the eyes may result from overexposure to
high concentrations of dust from certain fabricating operations.
Chronic: Repeated long term inhalation of high concentrations of
respirable dust may cause inflammation of the upper and lower
respiratory tract.

UNCONTROLLED WHEN PRINTED


Safety Data Sheet
DIBOND ®

REVISION: 8 DOCUMENT CODE: BEN--PRO1-305

Section IX Physical and Chemical Properties


Appearance: Solid Sheet. Sandwich Construction
Odor: NA
Odor Threshold: NA
PH: NA
Melting Point: Aluminum > 890 oF. Core > 210 oF.
Initial Boiling Point/Boiling Range: No Data
Flash Point: Composites - (ASTM D-1929) >784 °F,
(418 °C)
Evaporation Rate: NA
Flammability: Not Flammable
Upper/lower explosive limit: NA
Vapor Pressure: NA
Vapor Density: NA
Specific Gravity: Aluminum 2.70-2.73 g/ccm range Core 1.5 -
1.7 g/ccm range
Solubility: Insoluble in water
Partition coefficient: NA
Auto-Ignition: Composite - (ASTM D-1929) >783 °F (417
°C) Core - N/A
Decomposition Temperature: No Data
Viscosity: NA

Section X Stability and Reactivity


Stability: Stable
Incompatibility: None known
Decomposition products: Reference: “Thermal decomposition”, Section V

Section XI Toxicology Information


No information available

Section XII Ecological Information


No information available at this time

Section XIII Disposal Information


Care must be taken when using or disposing of material debris to prevent environmental
contamination. Dispose of the debris in accordance with the Clean Air Act, the Clean Water
Act, the Resource Conservation and Recovery Act and all state or local laws / regulations
regarding disposal.

UNCONTROLLED WHEN PRINTED


Safety Data Sheet
DIBOND ®

REVISION: 8 DOCUMENT CODE: BEN--PRO1-305

Section XIV Transportation


UN Number: NA
UN Proper Shipping Name: NA
Transportation Hazard: NA
Packing Group: NA
Environmental Hazard: NA
Transport in bulk: NA
Special Precautions: NA

Section XV Regulatory Information


PROPOSITION 65: (California Only)
Additional Requirements for the State of California: “ WARNING: This product can expose you to
chemicals including ethyl benzene, which is known to the State of California to cause cancer. For more
information, go to www.P65Warnings.ca.gov.”

REACH: Pursuant to Title II article 7 of the regulation this product is exempt from registration
and notification and is therefore compliant with the REACH regulation.
RoHS: DIBOND is compliant with the RoHS standard. All current colors of DIBOND are also
compliant with the RoHS standard with the exception of Hunter Red over Caution Yellow and Ultra
Marine over Dark Green.

Section XVI Other Information


Abbreviations:
NA = Not Applicable CAS = Chemical Abstract Service
OSHA = Occupational Safety and Health Administration. PEL = Permissible Exposure Limit
STEL = Short Term Exposure Limit. ACGIH = American Conference of Governmental Industrial
Hygienist. TLV = Threshold Limit Value.

IMPORTANT: The information and data contained herein are believed to be accurate and
have been compiled from sources believed to be accurate. All information contained herein is
offered for your consideration, information, investigation, and verification. 3A COMPOSITES
MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, CONCERNING THE
ACCURACY OR COMPLETENESS OF THE INFORMATION AND DATA HEREIN. THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE SPECIFICALLY EXCLUDED. 3A Composites will not be responsible for
claims relating to any parties' use of or reliance on information and data contained herein
regardless of whether it is claimed that the information are inaccurate, incomplete, or
otherwise misleading

UNCONTROLLED WHEN PRINTED


Safety Data Sheet
DIBOND ®

REVISION: 8 DOCUMENT CODE: BEN--PRO1-305


End of Safety Data Sheet

UNCONTROLLED WHEN PRINTED

You might also like