Single Board Computer

Networking Platform Solution 2 ROCKY-3705 28

New PIAGP®system concept ROCKY-3703 28
provides AGP slot capability between 7
CPU card and Passive Backplane ROCKY-3702 29
configuration ROCKY-3701 29
PIAGP CPU Card Selection Guide 9 ROCKY-772 30
SAGP-865 10 ROCKY-C800 30
SAGP-845 11 ROCKY-C400 31
SAGP-4620 12 ROCKY-538 32
SAGP-815 13 ROCKY-548 32
PCIAGP Backplane 14 Half Size CPU Card Selection Guide 33
PXAGP Backplane 15 Half Size CPU Card Selection Guide 34
Full-Size CPU Card Selection Guide 16 Half Size CPU Card Selection Guide 35
Full-Size CPU Card Selection Guide 17 JUKI-6770 36
Full-Size CPU Card Selection Guide 18 PSB-4710 37
Full-Size CPU Card Selection Guide 19 PCISA-3716 38
ROCKY-4786 20 PCISA-C400 38
ROCKY-6160 21 PCISA-C800/EDEN-400 39
ROCKY-4784 22 ROCKY-512 39
ROCKY-4783 22 JUKI-3711 40
ROCKY-4782 23 JUKI-745 40
ROCKY-3732 23 JUKI-C400 41
ROCKY-3742 24 JUKI-EDEN-400/C3-1G 41
ROCKY-3722 24 JUKI-510/511P 42
ROCKY-3786 25 JUKI-6752 42
ROCKY-3785 26 386SX-40 Class CPU Card 43
ROCKY-3782 26 5x86/486 Class CPU Card 43
ROCKY-3708 27 New Industrial Motherboard ICPMB 44
ROCKY-3706 27 Product Line
ICPMB-7880 45 ETX Series 87
ICPMB-8650 46 ETX Series 88
ICPMB-8660 47 PM-1045 89
ICPMB-7660 48 PM-1043 89
ICPMB-7760 49 PM-1041 / PM-1021 90
ICPMB-2661 50 PM-1058 / PM-1056 90
ICPMB-2660 51 PM-1002 91
POS Product Selection Guide 52 PM-1055 91
POS-478 53 PM-1004 / PM-1028 92
POS-380 54 PM-1054 93
POS-370 55 PM-1038 93
POS-EDEN-400 56 PM-1037 94
5.25” NOVA Embedded Board PM-1031 94
57
Selection Guide
A104-KIT01 94
5.25” NOVA Embedded Board 58 PM-1033 94
Selection Guide
NOVA-7170 59 PM-1057 95

NOVA-7171 60 PM-1001 95

NOVA-8890 61 MLAN-1000 96

NOVA-7898 62 MLAN-104/104SSL 96

NOVA-7896 63 PLC-508 97

NOVA-7895 63 PVGA-9970 97

NOVA-7894 64 ICAN-02 97

NOVA-7820/7830 65 PLC-69030 97

NOVA-C400 66 LCD LVDS Module / DOC Module 98

NOVA-EDEN-733 67 IFD-108A/250A/350A 99

NOVA-4899 68 IFM-405/445 99

NOVA-4898 69 IVC-4300 100

MB-3200 69 IVC-4200 101

NOVA-600 / NOVA-300 70 IVC-120G 102

ISS-102 71 IVC-100G 103

EPIC Form Factor Introduction 72 IVC-200G 104

NANO-7270 73 PCI Bus Routing Table of IEI’s 105

Backplanes
NANO-7240 74
2U Chassis Backplane 106
3.5” WAFER Embedded Board 75 2U Chassis Backplane With Each
Selection Guide 107
Model
3.5” WAFER Embedded Board 76 PCI-64 64-bit PCI Backplane 108
Selection Guide
WAFER-6820 77 PCI-64 64-bit PCI Backplane 109

WAFER-C400 78 PICMG Bus Passive Backplane 110

WAFER-C800EV/E667EV 79 PICMG Bus Passive Backplane 111

WAFER-E669 80 PICMG Bus Passive Backplane 112

WAFER-5820/5822 81 PICMG Bridged Backplane 113

WAFER-5823 82 PCISA Backplane 113

WAFER-4826 83 PCISA Backplane 114

WAFER-4821/4823 84 PCISA Backplane 115

ETX Series 85 PCISA Backplane 116

ETX Series 86 ISA Backplane 116

Networking Platform Solution
Networking is everywhere. Various Networking Appliances are demanded and created for different purposes in networking
environment. To make competitive networking appliance, the worldwide ISV, experts of
networking / Linux are always looking for the best Networking Platform to fit their
individual needs. For example: different mix of 10/100 Mbps, Giga Ethernet & fiber
port, Removable HDD, the number of HDD, wireless LAN, redundant power,
LCD module, VPN accelerator option, custom appearance.......etc. The needs
are diversified widely. However, the common needs are:

1. Time to Market
2. Flexible Custom Design
3. More Powerful CPUs
4. Best Networking Bandwidth
5. Remote Management Capability

Morphing The High Speed Network

IEI modularized network platform design includes the main board, ISS-113 and the
peripheral board, HL-KIT-001. We realize the flexibility and performance through the innovative way.

IEI’s Networking Platform Solution meet all field requirements by the Modular
System Design with
a. Dual Xeon Network Mainboard with over 3GB bandwidth expansion
b. Custom I/O board to optimize the cost of performance & custom flexibility
c. IPMI module ( IPMI 2.0 compliance) for the best Remote Management Solution
d. Custom Chassis for your unique ID & various peripherals demand

IPMI HL-KIT-001
The best remote monitor solution – Intelligent
= Support three Hub link 2.0 interface,
Platform Management Interface (IPMI) monitors
bandwidth up to 3GB
system health status automatically, remote
= Fully customization network IO board
recovery and console redirection. The IPMI can
= Socket PCI64 for 64bit PCI module
be an optional feature with our IPMI module,
application.
WIM-HT68-01

ISS-113
= Support dual Xeon up to 3.2GHz
= Intel E7501 and ICH3-S chipset
= Support dual channel DDR266/200
memory up to 4GB with ECC function.
= WIM Socket offers IPMI module,
WIM-HT68-01
The Best Remote Monitor Solution
- IPMI (Intelligent Platform Management Interface)
IPMI gives system managers access to platform management information and
control features, allowing more accurate predictions of hardware failures, diagnostic
of hardware problems and the initiation of recovery actions.
The Intelligent Platform Management Interface (IPMI) is a specification that defines
system, network, and system board-level interfaces to an Intelligent Management
device (named Base Management Controller, or BMC) on or attached to the system
board that performs monitoring and control operations. The IPMI specification defines
interfaces for such operations as power control, system event log management,
system sensor readings, event handling, system parts inventory, and more.
IEI have capability of developing the custom firmware complying with IPMI standard.
We reserve a WIM socket™ for the IPMI module, which can carry the IPMI module as
an option for wide range applications including ATM, Server, KVM and some industrial
application.
From our viewpoint, IPMI can benefit to the system integrator by decreasing the
maintenance cost with remote control and management features. By using the
console redirection via LAN or modem, engineers can easily proceed the remote
diagnostic and recovery. They don’t have to go for on-site trouble shooting every time
and can get the alert before the systems encounter abnormal status e.g. temperature,
voltage, fans, power supplies, and chassis intruded. So, they recognize the IPMI
solution as a standard of industry.

IPMI WIM-HT68-01
Wellsyn IPMI Module
Hitachi H2168 BMC

Main Features
IPMI modular design can easily upgrade your system.
Monitor your system health (fan/ temperature/ voltage/ processor/ disk/
device ) with or without OS live.
Remote control your system in emergency or requirement, like: power
on/off, warm reset, reboot, power cycle ... etc.
Wide range applications including server, KVM, ATM and industrial
highly reliable product application.
IPMI gives system managers access to platform management
information and control features, allowing more accurate predictions of
hardware failures, diagnostic of hardware problems and the initiation of
recovery actions
Eliminate extra maintenance cost
IPMI 2.0 compliant (IPMI over LAN, Serial Port and Modem)
Emergency Management Port by COM & LAN
Shares LAN controller with mainboard, and uses out-of-band bandwidth.
Event Log information
- BIOS event
- Hardware Monitor Event
- System Event
Text Console Redirection
- POST
- BIOS Setup
IPMI Architecture - DOS Operation
 ISS-113 Dual Xeon Network
Mainboard
IEI rolls out our dual Xeon™ platform integrated Intel® E7501 and ICH3-S chipset supporting dual channel
DD226/200 memory up to 4GB with ECC function. ISS-113 represents high performance up to 3.2GHz
powered by dual Xeon. Besides, it offers convenient remote management function (IPMI) to monitor system
health status automatically, remote recovery and console redirection.

Processor
Dual mPGA604 ZIF Sockets
Supports up to two Intel Xeon processor with 2MB
integrated Advanced Transfer Cache up to 3.20GHz

Chipset
Intel E7501 chipset MCH + ICH3-S

System Memory
Four 184-pin DIMM sockets
Supports up to 4 GB DDR266/200 ECC registered
memory dual channel memory bus

Dimension
210
38.74
5.51

5.49
119.99

I PM I
330.00
199.01

187.48

WIM Socket™
socket for IPMI module
5.49
5.49

179.91 24.59

ISS-113 Specifications
16-bit Hub
Dual mPGA604 ZIF Sockets Interface(1GB/S)

CPU Supports up to two Intel R XeonTM processor with 2MB integrated

Advanced Transfer Cache up to 3.20GHz
System Bus 533MHz/400MHz system bus
Four 184-pin DIMM sockets
16-bit Hub
System Memory Supports up to 4 GB DDR266/200 ECC registered memory Interface(1GB/S)
Dual channel memory bus
Intel R E7501 chipset
Chipset
MCH + ICH3-S
WIM Socket for IPMI
Expand Slot 32-bit 33MHz PCI slots
Enhanced IDE with 40pin and 44pin box header 16-bit Hub
IDE Interface(1GB/S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB Two USB ports
Serial Ports Two Fast UAR T 16550 serial ports
Keyboard / Mouse Keyboard and Mouse ports with 6 pin header
Power Consumption �
[email protected], [email protected], [email protected], [email protected], [email protected]
(Dual Xeon 3.06GHz CPU and 2GB DDR Memory)
�
 HL-KIT-001 Network I/O
Board
Intel P64H2 bridge technology transforming the three hub-link 2.0 to six 64-bit PCI-X and expanding the
bandwidth up to 3GB is utilized in HL-KIT-001. The peripheral board is designed with custom form factor. It
commits a full flexibility for tailor-made requirements.

OEM / ODM
Gigabit Ethernet Dimension
Controllers
Intel 82546 Gigabit Ethernet
�����
Supports 10BASE-T,

�����

����
����
100BASE-TX, and 1000BASE- ����� �����

����
T with four RJ-45 connector

Dual-Channel Ultra320
SCSI

�����
LSI 1030 SCSI Controller

������
Dual-Channel Ultra320 SCSI
supports up to 30 Ultra 320
SCSI Devices

Socket - PCI 64™

���
64-bit 133MHz socket PCI slot

SATA

�����
�����

Two Marvell 88SX5080 Serial

ATA Controller; Support 16
port SATA 150 devices
�����
����

����
����� �����
�����

����
HL-KIT-001 Specifications

Hub Link Interface 2.0

Over 3 Giga Byte bandwidth
Provide different kind of networking platform Solution

Case Study
Internet server accept
Firewall, Web, E-Mail, VPN, Security, Load Balancing
Server Max support to 24 channel Giga bit Ethernet/
Fiber
Ordering Information Coming
Case Study ISS-113
Soon
File server Dual XEON Network Mainboard with WIM socket, ECC DDR Dimm.
Storage Gateway, SQL Server, Document Storage,
Network Storage, NAS, DAS, SAN, iSCSI, Proxy HL-KIT-001
Server, Cache server Ultra 320 SCSI Max. up to Network I/O Board with 4 Giga bit Ethernet, Dual channel Ultra 320
90HDD devices SCSI, 16 channel SATA, socket PCI 64.
Serial ATA 150 Max. up to 64 S-ATA devices
WIM-HT68-01
Wellsyn IPMI Module Hitachi H2168 BMC
PIAGP® Industrial PC Platform
free up AGP capability!!

SAGP-4620E
CPU : Socket-462 for AMD® Athlon XP®/ Duron® with
266/333MHz FSB
System Chipset: VIA KT400A + VT8235
System Memory: 2 x DDR 266/333/400MHz SDRAM
socket support up to 2GB
Functions: AGP 8X Bus, LAN, Audio, CFII & USB 2.0
Watch Dog Timer & Hardware Monitor ready

PISA-KIT01
PCI to ISA Bridge module

AVGA-X400
PXAGP-13S
SiS Xabre400 within on board
64MB DDR SDRAM 8X AGP Card

Prescott
SAGP-865EVG Ready SAGP-845MEV SAGP-815EV
®
CPU: Socket-478 base support Intel CPU: Socket-478 base support Intel® CPU: Socket-370 base support Intel®
Pentium 4®/ Celeron with 533/800MHz FSB Pentium 4® / Pentium 4-M / Celeron™ Pentium III® Tualatin/ Celeron with 66/100/
TM TM

System Chipset: Intel® 865G + ICH5 with 400/533MHz FSB 133MHz FSB
System Memory: Dual channel DDR333/400 System Chipset: Intel® 845G + ICH4 System Chipset: Intel® 815E + ICH2
SDRAM socket support up to 2GB System Memory: 2 x DDR266/333 System Memory: 2 x 168-pin SDRAM socket
Functions: VGA, LAN, GbE, Audio, CFII, USB SDRAM socket support up to 2GB support up to 512MB
2.0 & Serial ATA-150 Functions: VGA, LAN, CFII, USB 2.0 & Functions: VGA, LAN, CFII, USB 2.0 &
Watch Dog Timer & Hardware Monitor ready C-Media 5.1-channel Audio C-Media 5.1-channel Audio
Watch Dog Timer & Hardware Monitor Watch Dog Timer & Hardware Monitor ready
ready

1-7 w w w. i e i w o r l d . c o m
 New PIAGP®system concept provides AGP slot capability
between CPU card and Passive Backplane configuration
Single
Board
The PCI Industrial Computer Manufacturers Group(PICMG) Computer
was established in 1994, setting its mission as defining PIAGP Series
specifications for industrial PCI/ISA passive backplane and PICMG
CPU card interfaces. Various manufacturers have introduced a Half-Size
multitude of CPU cards for all kinds of applications, all based on Industrial
Motherboard
the standards defined by PICMG, but the advance in high-end
5.25” NOVA
AGP VGA card has led to a bottleneck, and these standards EPIC NANO
have found severe performance limitations. Most CPU cards are 3.5” WAFER
equipped with a VGA function on board, but due to the limitation ETX
in board sizes or taking cost into consideration, these cards are PC/104
unable to offer a graphics quality that the user demands. Add-on Card
IVC Card
This now raises the issue of how to combine a PCI/ISA Backplane
backplane with an AGP slot.
LCD
As one of the world pioneers in CPU mainboard technology, Product
and after lengthy consultation with our clients, IEI has developed Series
a proprietary CPU card AGP bus, designed to interface with the
IEI-patented (patent pending) PCI/ISA/AGP passive backplane.
This series of products are PIAGP (PCI, ISA and AGP) and Chassis
cover the SAGP series of CPU cards and PCIAGP/PXAGP
series passive backplanes.
Power
supply

PIAGP® industrial PC platform free up AGP capability!!

Peripheral

The advantages of using this series of PIAGP cards are

numerous:

1. Supports standard AGP version 2.0 slot on the PCIAGP/PXAGP

series passive backplane.

2. Compatible with all available AGP VGA cards PCIAGP/PXAGP

backplane is also integrated with the PICMG PCI/ISA CPU
Card slot.Thus, traditional PICMG form factor CPU cards and IEI
proprietary SAGP series CPU cards are supported.

3. When using an SAGP series CPU Card, users can install a

PISA-KIT01 PCI-to-ISA Conversion Module on the PCIAGP/
PXAGP backplane to enable the ISA slots to function.

Traditional PICMG PCI/ISA passive 4. PCIAGP/PXAGP Backplanes also provide an IDE RAID controller
backplane solution,with no AGP slot. option. Using the backplane RAID controller, users can now
assemble highly reliableIndustrial PC storage system without any
change to the CPU card configuration.

PICMG
PCISA
ISA PCIAGP® and PXAGP backplanes fit perfectly into any
IEI Chassis

w w w. i e i w o r l d . c o m 1-8
 PCIAGP / PXAGP Series Backplane Features :

PIAGP system concept design supports PCI,ISA and AGP slot on one
backplane

6-layer PCB designed to exceed high speed AGP signal requirements

Selected models provide a PIAGP and PICMG slot to offer more

flexibility to integrate either a traditional or SAGP series CPU board

Optional PISA-Kit01 PCI to ISA interface module supports

ISA slot function when using SAGP series CPU board.

Mounting Holes compatible with IEI PCI/PX series backplane. No PICMG AGP PIAGP
SBC VGA card SBC
modifications necessary for current chassis backplane mounting hole
position design.
ISA Bus
PCI Bus
Optional IDE RAID controller (Promise PDC20267)
Supports JBOD (spanning), RAID 0 (striping), RAID 1 (mirroring),
and RAID 0/1 (striping/mirroring). ISA
AGP
Offers sustained data transfer under RAID 0 of up to 100MB/sec
Supports up to two arrays with different RAID levels
Supports Ultra ATA-100/66/33 and EIDE drives
PCI to
PCI
Bridge
PCI
Supports “hot” swap of failed drive (PROMISE SuperSwap product) PISA-Kit PCI
Supports “hot” spare (portable drive required) . PCI to
ISA
Offers transparent data recovery and rebuilds drive in background daughter
board
Arrays are bootable with built-in BIOS
Multi-boot feature allows user to select which array to boot.

(R): Stands for RAID function

Example: PCIAGP-4S without RAID function
PCIAGP-4SR with RAID function

Backplane Model PICMG CPU Card PCI slot ISA slot Optional IDE RAID Mounting Hole Compatible Backplane
PCIAGP-4S (R) 2 YES PCI-4S
PCIAGP-5S (R) 3 YES PCI-5S
PCIAGP-5SD 3 PCI-5SD5
PCIAGP-6S (R) 3 2 YES PCI-7S
PCIAGP-7S (R) 4 2 YES PCI-8S
PCIAGP-9S2 (R) YES 4 3 YES PCI-10S
PCIAGP-12S YES 4 5 PCI-12S
PCIAGP-13S2 (R) YES 4 7 YES PCI-13S2
PCIAGP-13S3 (R) 4 7 YES PCI-14S3
PXAGP-7S (R) 5 YES PX-8S
PXAGP-9S (R) YES 6 2 YES PX-10S
PXAGP-12S2 (R) YES 7 3 YES PX-14S2
PXAGP-13S (R) 7 4 YES PX-14S5
PXAGP-13S3 (R) YES 11 YES PX-14S3
PXAGP-19S (R) 12 5 YES PX-20S
PXAGP-19S2 (R) 16 2 YES PX-20S2
* PCIAGP-13S2(R) for PICMG slot, please contact supplier

1-9 w w w. i e i w o r l d . c o m
 PIAGP CPU Card Selection Guide
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
Model Name SAGP- 865EV/ EVG SAGP- 845MEV SAGP- 4620E SAGP- 815EV
PC/104
Add-on Card
CPU Socket Socket 478 Socket 478 Socket- 462 Socket-370 IVC Card
Backplane

Intel P4 / Celeron Intel P4 / P4-M / Celeron

CPU Type supports HT Technology supports HT Technology
AMD Athlon XP / Duron Intel Tualatin / Celeron
LCD
Product
FSB 400/533/800 MHz 400/533 MHz 266 / 333 MHz 66 / 100 / 133 MHz Series

Chipset Intel 865G + ICH 5 Intel 845G/GE + ICH 4 VIA KT400A + VT8235 Intel 815E + ICH 2
Chassis
Dual channel DDR200/266/ 333(845GE)
DDR 266/333/400 SDRAM up PC100/133 SDRAM
Memory DDR333/400 SDRAM SDRAM
to 2GB up to 2GB
up to 2GB up to 2GB
Power
VGA Intel 865G integration Intel 845G integration N/A Intel 815E integration supply

AGP 4X/2X AGP 4X/2X

AGP AGP 4X / 8X bus
(only 1.5V) bus
AGP 4X/8X bus
(only 1.5V) bus
Peripheral
One 10/100Mbps
One 10/100Mbps One 10/100Mbps
Ethernet or One GbE i82547 by CSA
Ethernet
One 10/100Mbps Ethernet
Ethernet
(SAGP-865EVG)

2 x RS-232 2 x RS-232 2 x RS-232 2 x RS-232

1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
I/O Interface 1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP) 1 x LPT (SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP)
7 x USB 2.0 4 x USB 2.0 6 x USB 2.0 4 x USB 2.0
1 x IrDA 1 x IrDA 1 x IrDA 1 x IrDA

2 x IDE ATA-100/66/33
2 x IDE ATA-100/66/33 2 x IDE ATA-133/100/66/33 2 x IDE ATA-100/66/33
Drive Interface 2 x SATA-150
1 x FDD 1 x FDD 1 x FDD
1 x FDD

C-Media CMI8738 C-Media CMI8738

Audio AC’97 CODEC
5.1 channel audio
AC’97 CODEC
5.1 channel audio

SSD CF Type II CF Type II CF Type II CF Type II

[email protected], +5V@7A,
Power [email protected] +12V@4A, +5V@7A [email protected], [email protected], [email protected], [email protected] (P3
(P4 3.0GHz FSB800 (P4 2.4GHz, Dual channel [email protected] (AMD 2500+ 1GHz
Consumption Dual channel DDR400 512MB DDR 512MB SDRAM) 2.4GHz , 512MB DDR SDRAM) 256MB SDRAM)
SDRAM)

Watchdog Timer Software Programmable 1-255 sec system reset

Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function
Monitor

Operation Temperation Range 0 ~ 60ºC

Environment Relative Humidity 5 ~ 95 %, non-condensing

Recommand CF-512
CF-508
CF-514 CF-513(upto 3.06GHz) CF-504
Fancooler CF-516
CF-515(P4-M CPU used)

If needed ISA function, If needed ISA function, used If needed ISA function, used PISA-
No ISA Support
Remark used PISA-KIT01 PISA-KIT01
VGA card required
KIT01
PCI to ISA bridge PCI to ISA bridge PCI to ISA bridge

w w w. i e i w o r l d . c o m 1-10
 SAGP-865 PIAGP Socket 478 800MHz FSB Based CPU Card
with VGA, LAN, GbE, S-ATA, USB 2.0 & Audio

Prescott Ready Version coming soon !! Long Term Supports

Intel 865G CF II
ICH5

VGA

USB 2.0

GbE

10/100 Mbps Ethernet

K/M

PCI AGP

FSB 800 Dual DDR 400 Prescott

Ready AGP8X

Specifications Feature
Socket-478 base support Intel® Pentium 4®/ Celeron™ with Intel Pentium 4 CPU support upto FSB 800 MHz
CPU
533/800MHz FSB PIAGP interface supports AGP 8X/4X add-on card
System Chipset Intel® 865G + ICH5 Dual channel DDR400 SDRAM memory support
System Memory Dual channel DDR333/400 SDRAM socket support up to 2GB LAN, SATA, USB 2.0, Audio integrated
Integrated with i865G
Display
– Bus: AGP 4X/8X Tech Talk
SSD 1 x Compact Flash™ Type II socket
Audio AC’97 CODEC
– 1 x 10/100Mbps i82562ET Ethernet
Intel Prescott Processor Introduction
Ethernet – 1 x 10/100/1000Mbps i82547 Ethernet by CSA
(Communication Streaming Architecture)(SAGP-865EVG) Intel’s latest 90nm process technology, the Prescott processor is
– 2 x RS-232 by pin header nothing more than just the familiar Pentium 4 processor. Now that
– 1 x PS/2 for Keyboard/Mouse the transistor size has been shrunk from 130nm (in Northwood) to
– 1 x LPT by pin header (supports SPP/ECP/EPP mode) 90nm, there is now more real estate space on the silicon die to fit an
– 7 x USB 2.0 (1 x USB connector, others 2 x 4 by pin- extra transistor to further enhance the performance. Much of these
I/O header) transistors make up the large 1MB Level 2 cache which should help
– 2 x IDE ATA-100 (40-pin with 2.54mm pitch) boost the performance of certain applications. The doubling of the L2
– 2 x Serial-ATA 150
cache has been proven effective in performance as seen during the
– 1 x Floppy (34-pin with 2.54mm pitch)
– 1 x IrDA transition from the Willamette (256KB) to Northwood (512KB)
WDT Software programmable supports 1 ~ 255 sec system reset
Hardware Provides CPU Vcore, Vcc, CPU/ System fan speed and Processor Specifications Compared
Monitor temperature detecting function
Processor Model Intel Pentium 4 Intel Pentium 4 “Prescott”
Power Control
Meets ACPI 1.1 specification Codename Northwood Prescott
Function
Manufacturing
Power [email protected], +5V@7A,[email protected] (P4 3.0GHz FSB 800MHz, 0.13µm 90nm (0.09µm)
Technology
Consumption Dual chanel DDR400 512MB SDRAM)
No. of Transistors 55 million 125 million
Operation Die Size 146 mm² 112 mm²
0~60°C
Temperature
Front Side Bus 800MHz 800MHz
Relative L1 Cache
5~95%, non-condensing 8KB + 12KB 16KB + 12KB
Humidity (data + instruction)
GW 1.1kg L2 Cache 512KB full-speed 1MB full-speed
Core Voltage 1.475V - 1.550V 1.25V - 1.40V
Remark Intel Prescott CPU support up to 3.0 GHz
Form Factor Socket-478 Socket-478

IEI Option
CF-514 Ordering Information
High Performance Skiving Pentium 4 CPU Cooler
page 5-5 SAGP-865EV
PIAGP Socket 478 800MHz FSB Based CPU Card with
CB-USB-02 VGA, LAN, S-ATA, USB 2.0 & Audio
Dual port USB cable
page 5-6
SAGP-865EVG
PISA-KIT-01 PIAGP Socket 478 800MHz FSB Based CPU Card with
PCI to ISA bridge module VGA, LAN, GbE, S-ATA, USB 2.0 & Audio
page 1-11

1-11 w w w. i e i w o r l d . c o m
 SAGP-845 PIAGP Socket 478 533MHz FSB Based CPU
Card with VGA, LAN, USB 2.0 & Audio

Single
Long Term Supports Board
Computer
CF II ATX 12V
PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
USB 2.0 EPIC NANO
3.5” WAFER
10/100 Mbps ETX
Ethernet PC/104
Add-on Card
VGA IVC Card
Backplane

K/M
LCD
Product
Series
PCI AGP
Chassis
Feature
DDR 333 FSB 533 AGP8X
4X
Intel P4 / P4-M CPU support upto FSB 533 MHz Power
Specifications PIAGP interface supports AGP 4X add-on card
DDR266 SDRAM memory support
supply

Socket-478 base supports Intel® Pentium® 4-M / P4 / LAN, USB 2.0, Audio integrated
CPU
Celeron™ up to 533MHz FSB
Peripheral
System Chipset Intel 845G/GE + ICH4)
Support 200/266/(845GE) 333MHz DDR SDRAM, maximum Tech Talk
System Memory
up to 2GB
– Integrated-in Intel 845G chipset
– Bus: AGP 4X, 66MHz(When plug-in AGP VGA card with
Hyper-Threading Technology Benefits
the SAGP-845EV CPU Board will automatically disable the
SAGP-845EV’s internal VGA function) Intel Hyper-Threading Technology improves the utilization of onboard
Display
– V-RAM: Shared with system memory (DVMT technology) resources so that a second thread can be processed in the same processor.
– Resolution: Up to 2048x1536@60MHz refresh rate Hyper-Threading Technology provides two logical processors in a single
(Analog) processor package.
– Connector: DB-15 for CRT display
Hyper-Threading Technology offers
SSD 1x Compact Flash Type II socket
– improved overall system performance
Onboard 10/100Mbps Fast Ethernet controller (82562ET
Ethernet – increased number of users a platform can support
PHY)
Audio Onboard C-Media CMI8738 5.1 channel audio chip – improved reaction and response time because tasks can be run on
– 2x ATA/100 IDE channels support CD-ROM, ZIP and LS- separate threads increased number of transaction that can be executed
120 bootable – compatibility with existing IA-32 software
– 4x USB 2.0 ports Code written for dual-processor (DP) and multi-processor (MP) systems
– 1x FDD channel supports 1.44/2.88MB and 3-Mode is compatible with Intel Hyper-Threading Technology-enabled platforms.
I/O – 2x RS-232 serial ports by pin header (16C550 UARTs A Hyper-Threading Technology-enabled system will automatically process
compatible)
multiple threads of multi-threaded code. (Data provided from Intel Corp.)
– 1x LPT parallel port supports SPP/ECP/EPP mode
– 1x IrDA (SIR Mode)
Intel Supported HT Chipsets List :
– 1x PS/2 connector for keyboard/mouse Intel 875P/865G/865GV/865PE/865P/848P/850E/845GE/845PE/ 845GV/
Software programmable supports 1~255 seconds system 845G/ 845E chipsets
WDT
reset
Hardware Provides CPU Vcore, Vcc; CPU/System fan speed and
monitoring temperature detecting function.
Intel Pentium 4 Processor supports Hyper-Threading
ATX power
technology
Meets ACPI 1.1 specification 800 MHz system bus: 3.20, 3.0, 2.80, 2.60,
control function
+5V@7A; +12V@4A (Intel P4 2.4G with 512MB DDR Speeds Supporting Hyper- 2.40 GHz
Power Threading Technology
SDRAM) +5V@4A; +12V@3A (Intel P4-M 2.5G with 512MB
Consumption 533 MHz system bus: 3.06 GHz
DDR SDRAM)
Operating
0~60ºC 533 MHz system bus: 2.80, 2.66, 2.53, 2.40,
Temperature
2.26 GHz
Relative Other Available Speeds
5~95%, non-condensing
Humidity 400 MHz system bus: 2.60, 2.50, 2.40, 2.20,
Note AGP 2X only support 1.5V 2.0 GHz
GW 1.1kg

IEI Option
CF-512 P4 Cooler for SAGP-845EV, up to 2.5GHz P4
Ordering Information
CF-513 P4 Cooler for SAGP-845EV, up to 3.06GHz P4
SAGP-845MEV
CF-515 Pentium4-M CPU Cooler page 5-5 PIAGP Socket 478 533MHz FSB Based CPU Card with VGA,
PISA-KIT-01 PCI to ISA bridge module LAN, USB 2.0 & Audio
page 1-11

w w w. i e i w o r l d . c o m 1-12
 SAGP-4620 PIAGP Socket 462 333MHz FSB AMD Based CPU
card with LAN, USB 2.0 & Audio

For low power consumption

fan-less solution, please contact
Socket-462 for AMD Athlon XP/ supplier.
CF II
Duron with 200/266/333MHz FSB VIA KT400A

USB 2.0

10/100 Mbp Ethernet

COM

K/M

PCI AGP

DDR 400 AGP8X Feature

AMD AthlonXP / Duron CPU support upto FSB 333 MHz
PIAGP interface supports AGP 8X/4X add-on card
Specifications DDR400 SDRAM memory support
LAN, USB 2.0, Audio integrated
Socket-462 for AMD® Athlon XP®/ Duron® with 266/333MHz
CPU
FSB
System
VIA KT400A + VT8235
chipset
System
2 x DDR 266/333/400MHz SDRAM socket support up to 2GB
memory DVI
Display 4X/8X AGP bus (VGA AGP add-on card required; 1.5V only)
SSD 1 x Compact Flash™ Type II socket
Audio AC’97 Codec (VIA 1612) TV
Ethernet 1 x 10/100Mbps VT8235 on chip Ethernet controller
– 2 x RS-232 by pin header (10-pin with 2.54mm pitch)
– 1 x LPT by pin header (supports SPP/EPP/ECP mode) VGA
– 6 x USB 2.0
I/O – 1 x PS/2 for Keyboard/Mouse
– 2 x IDE ATA 66/100/133 (40-pin with 2.54mm pitch)
– 1 x Floppy (34-pin with 2.54mm pitch)
– 1 x IrDA
AVGA-X400
PERFECT FOR IEI VGA
WDT Software programmable supports 1 ~ 255 sec, system reset PIAGP PRODUCT SERIES
Hardware Provides CPU Vcore, Vcc, CPU/ System fan speed and
Monitor temperature detecting function Specifications
Power [email protected], [email protected], [email protected] (AMD 2500+, 512MB
Chip: SiS Xabre400 + SiS 301
Consumption DDR SDRAM)
V-RAM: On board 64 MB DDR SDRAM
Operation Resolution: MAX. 2048x1536, 32bit for CRT display
0~60°C
Temperature
Support AGP 8X bus to enhance graphics performance
Relative I/O Connector:
5~95%, non-condensing
Humidity – Support CRT display: 1 x 15 pin D-SUB15VGA Connector, 1 x by
Note No ISA interface supported pin-header
GW 1.1kg – Support DVI interface
Dual Display: Supports VGA & VGA or VGA & TV-Out or VGA &
LCD
Ordering Information
Ordering Information
SAGP-4620E
PIAGP Socket 462 333MHz FSB AMD Based CPU card with AVGA-X400 :
LAN, USB 2.0 & Audio Xabre400 on board 64MB DDR SDRAM with DVI Dual display
function

Note: It is recommanded to use AGP 2X with the SAGP-815EV

single board computer.

1-13 w w w. i e i w o r l d . c o m
 SAGP-815 PIAGP Socket-370 Based CPU board with AGP
4X Bus, LAN, USB2.0 & Audio
Single
Board
Long Term Supports Computer

ATA 100 IDE CF II PIAGP Series

PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
USB 2.0 ETX
PC/104
Add-on Card
10/100 Mbps
IVC Card
Ethernet
Backplane

VGA
LCD
Product
K/M Series

Chassis
PCI AGP

AGP4X
8X Power
supply

Specifications Feature
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz Peripheral
Supports Intel Coppermine/Tualatin socket 370 series Pentium PIAGP interface supports AGP 4X add-on card
CPU
III and Celeron CPU with 66/100/133MHz FSB
PC133 SDRAM memory support
System
Intel 815E B stepping chipset LAN, USB 2.0, Audio integrated
Chipset
System
Memory
2x 168-pin SDRAM socket maximum up to 512MB Tech Talk
– Built-in FW82815 chip
– Bus: AGP 4X, 66MHz (When you plug-in AGP VGA card with

Display
the SAGP-815EV CPU Board
– will automatically disable the Internal VGA function of SAGP-
What is AGP ?
815EV)
– V-RAM: Shared with system memory (DVMT technology) AGP(Accelerated Graphics Port) is a bus interface targeted for
– Resolution: Up to 1600x1200@8bit color high-performance 3D graphics. AGP supports only memory read/
– Connector: DB-15 for CRT display
write operation and single-master single-slave one-to-one only.
1x Compact Flash™ Type II socket for CF disk or IBM
SSD AGP uses both rising and falling edge of the 66MHz clock, for 2X
Microdrive
Audio Onboard C-Media CMI8738 5.1 channel audio chip AGP, the data transfer rate is 66MHz x 4byte x 2 = 528MB/s. AGP
Ethernet Onboard 10/100Mbps Fast Ethernet controller (82562ET PHY) is now moving to 8X mode, 66MHz x 4byte x 8 = 2.1GB/s.
– 2x RS-232 serial ports by pin header (16C550 UARTs As for the detail information please refer the Accelerated
compatible) Graphics Port Implementors Forum’s web site www.agpforum.org
– 1x PS/2 connector for keyboard/mouse
– 1x LPT parallel port by pin header (supports SPP/EPP/ECP
mode) AGP version comparison Table :
I/O
– 1x IrDA (SIR Mode)
Model Name AGP 1.0 AGP 2.0 AGP 3.0
– 4x USB 2.0 ports
– 2x ATA/100 IDE channel supports CD-ROM, ZIP and LS-120 Signaling 3.3V Signaling 1.5V Signaling 0.8V Signaling
drive bootable
– 1x FDD connector, support 1.44/2.88MB and 3-Mode Pipeined trans actions
0.8V AGP 1.0 +Fast
+Source synchronous AGP 2.0
WDT Software programmable supports 1~255 seconds system reset Signaling Writes
clocking
Hardware Provides CPU Vcore, Vcc, CPU/System fan speed and
Monitoring temperature detecting function. Speeds 2X, 1X 4X, 2X, 1X 8X, 4X
ATX Power
Meets ACPI 1.1 specification, comes with external power 1.5V keyed, 1.5V keyed,
control Connector 3.3V keyed
connector of 5V input Universal Universal
function
Power SAGP-815EV
[email protected], 12V@230mA (Intel 1GHz CPU with 256MB memory) IEI’s SAGP SAGP-865EV
Consumption -- SAGP-845MEV
Products SAGP-865EVG
Operating SAGP-4620E
0~60°C
Temperature
Relative
5~95%, non-condensing
Humidity
GW 1.1kg
Ordering Information
IEI Option
SAGP-815EV
PIAGP Socket 370 133MHz FSB Based CPU Card with VGA,
PISA-KIT-01 PCI to ISA bridgemodule LAN, USB 2.0 & Audio
page 1-11

w w w. i e i w o r l d . c o m 1-14
 PCIAGP Backplane

41.25 26
18.5

8.5 7.5
41.25 94
286

(R)

Note: PCIAGP-4S and PCIAGP-9S2 only support AGP 4X CPU cards (SAGP-815, SAGP-845) and AGP 4X Graphic cards.

1-15 w w w. i e i w o r l d . c o m
PXAGP Backplane
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Power
supply

Peripheral

SAGP-815 / 845 / 865 transfers PCI

signal to ISA

w w w. i e i w o r l d . c o m 1-16
 Full-Size CPU Card Selection Guide

ROCKY-4786EV/
Model Name ROCKY-6160 ROCKY-4784EV/ EVG ROCKY-4783EV ROCKY-4782EV/ E2V
EVG-R30

CPU Socket Socket-478

Intel P4 / Celeron Intel P4 / Celeron Intel P4 / Celeron

CPU Type Intel P4 / Celeron Intel P4 / Celeron
support HT Technology support HT Technology support HT Technology

FSB 400/533/800 MHz 400/533 MHz 400 / 533 MHz 400 / 533 MHz 400 MHz

Chipset Intel 865GV + ICH 5 Intel 852GME + ICH 5 Intel 845E + ICH 2 SiS651 + SiS962 Intel 845+ ICH2

DDR 200 / 266 / 333

Doul channel DDR 333 / DDR 266 / 333 SDRAM DDR 200 / 266 SDRAM PC100/133 SDRAM up
Memory SDRAM
400 SDRAM up to 2GB up to 2GB up to 2GB to 2GB
up to 2GB

SiS315 2D / 3D Graphics SiS315 2D / 3D Graphics

Integrate with Intel Integrated with Intel Engine Engine
Graphic Integrate with SiS651
865GV 852GME AGP 4X bus bandwidth, AGP 4X bus bandwidth,
32MB SDRAM 32MB SDRAM

One 10/100Mbps One 10/100Mbps One 10/100 Mbps One 10/100 Mbps
Ethernet(EV) Ethernet Ethernet(EV) One 10/100 Mbps Ethernet(EV)
Ethernet
and One GbE i82547 by and one GbE i82541PI and One GbE Broadcom Ethernet or dual 10/100 Mbps
CSA (EVG) (ROCKY-6160G) (EVG) Ethernet (E2V)

2 x RS-232
2 x RS-232 2 x RS-232 2 x RS-232 2 x RS-232
1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ECP)
I/O Interface 1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP)
4 x USB 2.0
8 x USB 2.0 8 x USB 2.0 2 x USB 1.1 4 x USB 1.1
3 x IEEE-1394a
1 x IrDA 1 x IrDA 1 x IrDA 1 x IrDA
1 x IrDA

2 x IDE ATA-100/66/33 2 x IDE ATA-100 / 66 / 33 2 x IDE ATA-133/100/

2 x IDE ATA-100/66/33 2 x IDE ATA-100/66/33
Drive Interface 2 x SATA-150 2 x SATA-150 66/33
1 x FDD 1 x FDD
1 x FDD 1 x FDD 1 x FDD

Audio AC’97 CODEC AC ‘97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC

SSD CF Type II CF Type II CF Type II CF Type II CF Type II

[email protected],
[email protected], [email protected], [email protected], [email protected], +5V@5A [email protected], [email protected] [email protected],
Power
[email protected] (P4 3.0GHz, (P4 Prescott 2.8G,2 x 512 (P4 2.2GHz , DDR266 (P4 2.0GHz , DDR266 [email protected] (P4 2.0GHz
Consumption
Dual channel DDR400 MB DDR SDRAM) 2GB SDRAM) 2GB SDRAM) , 1GB SDRAM)
512MB SDRAM)

Watchdog Timer Software Programmable 1-255 sec system reset

Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function
Monitor

Operation Temperation Range: 0 ~ 60ºC

Environment Relative Humidity: 5 ~ 95 %, non-condensing

Recommand
CF-514 CF-514 CF-514 CF-514 CF-514
Fancooler

1-17 w w w. i e i w o r l d . c o m
 Full-Size CPU Card Selection Guide
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
ROCKY-3742EV/ ROCKY-3732EV/ ROCKY-3722V/ EV/ ROCKY-3786EV/ 3.5” WAFER
Model Name ROCKY-3785EV-R11 ETX
EVF EVS-R2 EVS-R2 EVGU2-R11
PC/104
Add-on Card
CPU Socket Dual Socket-370 Socket-370
IVC Card
Backplane
Intel Tualatin/ P3 / Intel Tualatin/ P3 / Intel Tualatin/ P3 / Intel Tualatin/ P3 /
CPU Type Intel P3 / Celeron
Celeron Celeron Celeron Celeron
LCD
FSB 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz Product
Series
VIA VT82C694X + VIA VT82C694T +
Chipset Intel 440BX ntel 815E + ICH 2 Intel 815E + ICH 2
VT82C686B VT82C686B
Chassis
PC 100 / 133 SDRAM PC 100 / 133 SDRAM PC 100 SDRAM PC 100 / 133 SDRAM up PC 100 / 133 SDRAM up
Memory
up to 2GB up to 2GB up to 1GB to 512MB to 512MB
Power
supply
Graphic SiS6326, 4MB RAM SiS6326, 4MB RAM SiS6326, 4MB RAM Integrate with i815E Integrate with i815E

Peripheral

Dual 10/100 Mbps

One 10/100 Mbps
Ethernet
One 10/100 Mbps Dual 10/100 Mbps Ethernet (EV) One 10/100 Mbps
Ethernet (EV/ EVS)
Ethernet Ethernet (EV/ EVS) and One GbE Ethernet
or One 10/100 Mbps
(EVG/EVGU2)
Ethernet(E1V)

2 x RS-232
2 x RS-232
1 x PS/2 KB/MS
2 x RS-232 2 x RS-232 1 x PS/2 KB/MS 2 x RS-232
1 x LPT(SPP/EPP/
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x LPT(SPP/EPP/ECP) 1 x PS/2 KB/MS
ECP)
I/O Interface 1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP) 4 x USB 2.0 1 x LPT(SPP/EPP/ECP)
2 x USB 1.1
2 x USB 1.1 2 x USB 1.1 (EVU2/EVGU2) 2 x USB 1.1
1 x IrDA
1 x IrDA 1 x IrDA 2 x USB 1.1 1 x IrDA
2 x IEEE-1394a
1 x IrDA
(EVF)

2 x IDE ATA-100/66/33 2 x IDE ATA-33

2 x IDE ATA-100/
2 x Ultra160 SCSI 2 x Ultra160 SCSI 2 x IDE ATA-100/66/33 2 x IDE ATA-100/66/33
Drive Interface 66/33
channels (EVS) channels (EVS) 1 x FDD 1 x FDD
1 x FDD
1 x FDD 1 x FDD

Audio AC’97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC

SSD CF Type II CF Type II DiskOnChip CF Type II N/A

[email protected], [email protected], [email protected],

[email protected], +5V@15A, [email protected], [email protected] [email protected], [email protected]
Power +5V@15A, [email protected]
(Dual P3 1GHz (P3 1GHz , 256MB (P3 1GHz , 256MB
Consumption (Dual P3 1GHz (P3 850MHz
2GB SDRAM) SDRAM) SDRAM)
2GB SDRAM) 256MB SDRAM)

Watchdog Timer Software Programmable 1-255 sec system reset

Hardware Monitor CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function

Operation Temperation Range 0 ~ 60ºC

Environment Relative Humidity 5 ~ 95 %, non-condensing

Recommand
CF-504 CF-504 CF-504 CF-504 CF-504
Fancooler

w w w. i e i w o r l d . c o m 1-18
 Full-Size CPU Card Selection Guide

ROCKY-
ROCKY-3782V/ ROCKY- ROCKY- ROCKY- ROCKY-
Model Name 3702EV-R6/
EV/ EVS 3708EV/ E2V 3706EV/ EVG 3705EV-R2 3703EV
-R6V8

CPU Socket Socket-370

Intel Tualatin/ P3 / Intel Tualatin/ P3 / Intel Tualatin/ P3 / Intel Tualatin/ P3 / Intel Tualatin / P3 / Intel Tualatin / P3 /
CPU Type Celeron Celeron Celeron Celeron Celeron Celeron

FSB 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz 66 / 100 / 133 MHz

Chipset Intel 810E SiS635T ServerWorks LE-T SiS 630ET VIA PM133 Intel 440BX

PC 100 SDRAM up to PC 100 / 133 SDRAM PC 100 / 133 SDRAM PC 100 / 133 SDRAM PC 100 / 133 SDRAM PC 100 SDRAM
Memory 512MB up to 1GB up to 2GB up to 1GB up to 1.5GB up to 512MB

SiS315 2D / 3D ATI Rage XL 2D / 3D Chipset Ingrated ATI Rage Mobility-M,

Graphic Integrate with i810E Graphics Engine Engine Integrated SiS630ET Savage4 2D / 3D 2MB RAM
32MB SDRAM 8MB SDRAM Video Accelerator (8MB for EV-R6V8)

One 10/100 Mbps

One 10 / 100 Mbps
Dual 10/100 Mbps Ethernet(EV) One 10/100 Mbps Dual 10/100 Mbps One 10/100 Mbps
Ethernet Ethernet (EV/EVS) or dual 10/100 Mbps
Ethernet (EV) Ethernet Ethernet (EV) Ethernet
and One GbE(EVG)
Ethernet(E2V)

2 x RS-232 2 x RS-232 2 x RS-232 2 x RS-232

2 x RS-232 2 x RS-232
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
I/O Interface 1 x LPT(SPP/EPP/ECP)
ECP) ECP) ECP)
1 x LPT(SPP/EPP/
ECP)
2 x USB 1.1 ECP)
2 x USB 1.1 2 x USB 1.1 2 x USB 1.1 2 x USB 1.1
1 x IrDA 4 x USB 1.1
1 x IrDA 1 x IrDA 1 x IrDA 1 x IrDA

2 x IDE ATA-66/33
2 x IDE ATA-100/ 2 x IDE ATA-100/ 2 x IDE ATA-100/
1 x FDD 2 x IDE ATA-33 2 x IDE ATA-33
Drive Interface and 2 x Ultra160 SCSI
66/33
1 x FDD
66/33 66/33
1 x FDD
1 x FDD 1 x FDD 1 x FDD
channels (EVS)

C-Media CMI8738 5.1

Audio AC’97 CODEC
channel
N/A AC’97 CODEC AC’97 CODEC N/A

SSD CF Type II CF Type II N/A CF Type II DiskOnChip DiskOnChip

[email protected],
[email protected], +5V@5A, [email protected],
Power [email protected], [email protected],
[email protected] +5V@6A [email protected], +5V@5A
[email protected] [email protected] (P3 1GHz ,
Consumption (P3 500MHz , 128MB (P3 500MHz , 512MB (P3 850MHz , 256MB SDRAM)
(P3 1.2GHz 256MB SDRAM)
SDRAM) SDRAM)
1GB SDRAM)

Watchdog
Software Programmable 1-255 sec system reset
Timer

Hardware CPU Vcore, Vcc, CPU/System fan speed and CPU Vcore, Vcc, CPU/System fan speed and temperature detecting
N/A
Monitor temperature detecting function function

Operation Temperation Range 0 ~ 60 ºC

Environment Relative Humidity 5 ~ 95 %, non-condensing

Recommand
CF-504 CF-504 CF-504 CF-504 CF-504 CF-504
Fancooler

1-19 w w w. i e i w o r l d . c o m
 Full-Size CPU Card Selection Guide
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
ROCKY- ROCKY- EPIC NANO
ROCKY- ROCKY-772NEV/ ROCKY- ROCKY-
Model Name C800EVN/ C400EVN/ 3.5” WAFER
3701BX REV 548TX-R6 538TXV-R7 ETX
EVR-1G EVR
PC/104
Add-on Card
CPU Socket Socket-370 Socket-A Embedded on board CPU Socket-7 IVC Card
Backplane
Intel Tualatin / P3 / AMD Athlon / Athlon XP VIA C3 1GHz Intel ULV Celeron
CPU Type Celeron / Duron embedded 400MHz
Intel Pentium Intel Pentium
LCD
Product
Series
FSB 66 / 100 / 133 MHz 200 / 266 MHz 133MHz 133MHz 66 MHz 66 MHz

Chipset Intel 440BX VIA KL 133A VIA 8601A + 686B VIA 8601A + 686B Intel 430TX Intel 430TX Chassis

PC 100 SDRAM up PC 100 / 133 SDRAM up 2 DIMM socket 2 DIMM socket 2 DIMM socket upto 2 DIMM socket upto
Memory to 1GB to 1.5GB up to 1GB up to 1GB 512MB 512MB Power
supply

Chipset Ingrated
Savage4 2D / 3D Video
Graphic N/A
Accelerator,AGP 4X,
VIA 8601A Integrated VIA 8601A Integrated N/A ATI M1
Peripheral
32MB shared memory

Dual 10/100 Mbps One 10/100Mbps One 10/100Mbps

Ethernet N/A
Ethernet Ethernet Ethernet
N/A N/A

4 x RS-232 2 x RS-232 2 x RS-232 2 x RS-232 2 x RS-232

2 x RS-232 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
I/O Interface ECP)
1 x LPT(SPP/EPP/ECP)
ECP) ECP) ECP) ECP)
4 x USB 1.1
2 x USB 1.1 4 x USB 1.1 4 x USB 1.1 2 x USB 1.0 2 x USB 1.0
1 x IrDA
1 x IrDA 1 x IrDA 1 x IrDA 1 x IrDA 1 x IrDA

2 x IDE ATA-100/ 2 x IDE ATA-100/

2 x IDE ATA-66 2 x IDE ATA-33 2 x IDE ATA-33
Drive Interface 1 x FDD
2 x IDE ATA-100/66/33 66/33 66/33
1 x FDD 1 x FDD
1 x FDD 1 x FDD 1 x FDD

Audio N/A AC’97 CODEC AC’97 CODEC AC’97 CODEC N/A N/A

DiskOnChip / CF
SSD Type II
DiskOnChip / CF Type II CF Type II CF Type II 4 x DiskOnChip DiskOnChip

[email protected], [email protected], [email protected], [email protected],

[email protected], [email protected],
[email protected], - [email protected], 5V@4A, 5V@4A,
Power [email protected], +5VSB@180mA,
[email protected], [email protected] (Pentium MMX (Pentium MMX
Consumption (Athlon 1.4GHz , 1.5GB 12V@170mA
(Celeron 333MHz , (C3 800MHz 200MHz, 32MB 200MHz, 32MB
SDRAM) (512 MB SDRAM)
512MB SDRAM) 1GB SDRAM) SDRAM) SDRAM)

Watchdog
Software Programmable 1-255 sec system reset Support Support
Timer

CPU Vcore, Vcc,

Hardware CPU/System CPU Vcore, Vcc, CPU/System fan speed and
Hardware monitoring
fan speed and N/A N/A
Monitor system temperature detecting function
temperature detecting
function
Temperation Range 0 Temperation Range
Operation ~ 60 ºC 0 ~ 50 ºC Temperation Range 0 ~ 60ºC Temperation Range 0 ~ 60 ºC
Relative Humidity Relative Humidity Relative Humidity 5 ~ 95 %,
Environment 5 ~ 95 %, non- 5 ~ 95 %, non- Relative Humidity 5 ~ 95 %, non-condensing non-condensing
condensing condensing

Recommand
CF-504 CF-508 On board cooler Fan-Less CF-502/CF-504 CF-502/CF-504
Fancooler

w w w. i e i w o r l d . c o m 1-20
 ROCKY-4786 PICMG Socket 478 800MHz FSB CPU Card with
VGA, LAN, GbE, S-ATA, USB 2.0 & Audio

Prescott Ready and Serial-ATA RAID function coming soon !! Long Term Supports
Intel 865G ICH5 CF II

VGA

Speaker

10/100 Mbps Ethernet

GbE

K/M

PCI Bus ISA Bus

FSB 800 Prescott
Dual DDR 400 ™
RAID Ready
Feature Tech Talk
Intel P4 / Prescott / Celeron CPU supports upto FSB 800 MHz
Intel Extreme Graphic II integrated graphic engine
Intel® RAID Technology of Intel®
Dual channel DDR400 SDRAM memory support 82801ER(ICH5R)
LAN, SATA, USB 2.0, Audio integrated
Optional RAID function available RAID means Redundant Array of Independent Disks. As the words,
the aims of RAID technology was to use an array of hard disks for
Specifications either better performance or better security against disk failure.

CPU Socket-478 for Intel® Pentium® 4 with 533/800MHz FSB The Intel® RAID Technology solution, available with the
System chipset Intel® 865G/GV + ICH5 /ICH5R (ROCKY-4786EVGR) 82801ER(ICH5R), offers data stripping for higher performance (RAID
Dual channel DDR 333/400 SDRAM socket support up to Level 0) and data mirroring for better preservation. There is no loss
System memory
2GB of PCI resources or add-in card slot needed in the system.
Integrated in Intel® 865G/GV
Display
– Bus: AGP 4X/8X The Intel RAID Technology for SATA Option ROM provides a pre-
SSD 1 x Compact Flash™ Type II socket OS user interface for the Intel RAID Technology implementation
1 x 10/100Mbps i82562ET Ethernet and provides the ability for a Intel RAID Technology volume to be
Ethernet 1 x 10/100/1000Mbps i82547 Ethernet by CSA used as a boot disk as well as to detect any faults in the Intel RAID
(Communication Streaming Architecture) Technology volume attached to the Intel RAID controller.
Audio AC’97 CODEC
– 2 x RS-232 serial port by pin header
– 1 x LPT by pin header (supports SPP/EPP/ECP mode) RAID 0 Volume A
– 8 x USB 2.0 by pin header (stripping) Volume A + B
I/O
– 1 x PS/2 for Keyboard/Mouse Volume B
– 2 x IDE ATA-100 (40-pin header with 2.54mm pitch)
– 1 x Floppy (34-pin with 2.54mm pitch)
– 2 x Serial-ATA 150 (RAID function optional)
Volume A Mirror A
– 1 x IrDA RAID 1
WDT Software programmable supports 1 ~ 255 sec, system reset (mirror) Mirror
CPU Vcore, Vcc, CPU/ System fan speed and temperature
Volume B Volume A
Hardware Monitor
detecting function
[email protected], -12V@500mA, [email protected]
Power
Consumption
(P4 3.0GHz FSB 800MHz; Dual channel DDR400 512MB
SDRAM)
Ordering Information
Operation
0~60°C ROCKY-4786EVG-R30
Temperature
PICMG Socket 478 800MHz FSB CPU Card with VGA, LAN, GbE,
Relative Humidity 5~95%, non-condensing
S-ATA, USB 2.0 & Audio
GW 1.1kg
ROCKY-4786EVGR-R30
Remark Intel Prescott CPU support up to 3.0 GHz
PICMG Socket 478 800MHz FSB CPU Card with VGA, LAN, GbE,
S-ATA, USB 2.0, RAID & Audio
IEI Option ROCKY-4786EV-R30
PICMG Socket 478 800MHz FSB CPU Card with VGA, LAN, S-ATA,
USB 2.0 & Audio
CB-USB-02 Dual port USB cable
Note
CF-514 High performance Skiving Pentium® 4 CPU cooler
For DVI / NIC Teaming capability function, please contact with supplier
page 5-5

1-21 w w w. i e i w o r l d . c o m
 ROCKY-6160 PICMG Socket- 478 533MHz FSB CPU Card with LCD/
CRT VGA, LAN, GbE, SATA, USB2.0 & Audio

Single
Long Term Supports Board
ATX-12V 48 bit dual channel LVDS I/F Computer
CF II
PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
VGA
3.5” WAFER
ETX
Speaker PC/104
Add-on Card
10/100 Mbps IVC Card
Ethernet Backplane
GbE

LCD
K/M Product
Series

PCI Bus ISA Bus Chassis

DDR 333 ®

FSB 533 Dual lay Prescott Power

Disp Ready
™
pentium � supply
®

Feature Peripheral
Specifications Intel P4 / P4-M / Prescott CPU supports upto FSB 533 MHz
Intel Extreme Graphic II integrated graphic engine with LVDS
CPU Socket-478 for Intel® Pentium® 4 with 400/533 MHz FSB
DDR266 SDRAM memory support with ECC function
System Chipset Intel® 852GME + ICH5 LAN, SATA, USB 2.0, Audio integrated
System Memory 2x DDR-DIMM support DDR266/333 SDRAM upto 2GB Support dual independent display
Integrated in Intel® 852GME Tech Talk
Display
Bus: AGP 4X
Share system memory with Intel DVMT technology Intel 852GM/GME Chipset Introduction
DB-15 CRT connector
DF14-30F 48 bit dual channel LVDS LCD interface The Intel® 852GME Chipset for Embedded Computing is an
Dual Independent Display optimized integrated graphics solution with a 400/533 MHz system
1 x 10/100 Mbps ICH4 + i82562ET bus and integrated 32-bit 3D core at 133 MHz (at 533 MHz system
Ethernet
1 x 10/100/1000 Mbps i82541PI (ROCKY-6160G) bus). It features a low-power design, supports the Intel® Pentium® 4
SSD 1 x Compact Flash™ Type II socket processor and the Intel® Celeron® processor, and supports up to 2
2 x RS-232 serial ports GB of DDR 266/333 system memory.
1 x LPT (support SPP/EPP/ECP mode) The Intel® 852GM chipset is a mobile optimized integrated graphics
8 x USB 2.0 ports solution with a 400 MHz system bus and integrated 32-bit 3D core
1 x PS/2 for Keyboard/Mouse at 133MHz with Dynamic Video Memory Technology (DVMT). The
I/O
2 x ATA-100 IDE channel Intel® 852GM chipset has a low power design, supports advanced
2 x SATA-150 IDE channel
mobile power management, and supports up to 1GB of DDR 200/266
1 x Floppy
1 x IrDA System Memory.
Audio Support AC ’97 Codec Chipset comparison chat
Digital I/O 4 inputs, 4 outputs Intel 855GME Intel 852GME Intel 852GM Intel 845GV
Software programmable supports 1 ~ 255 seconds system FSB 400 Mhz 400/533 Mhz 400 Mhz 400/533 Mhz
WDT
reset DDR: 200/ DDR: 200/
Hardware Provides CPU Vcore, Vcc, CPU / System fan speed and Memory DDR: 266/333 DDR: 200/266
266/333 266
Monitoring temperature detecting function
ECC support Yes Yes No No
Power control
Support APM / ACPI 2.0 power control function AGP support 4X 4X No No
function
LVDS Through DVO
Power [email protected], [email protected], (P4 Prescott 2.8G, 2x 512MB DDR Integrated Integrated Integrated
interface Port
consumption SDRAM)
DVO Port DVOB/C DVOB/C DVOC DVOC
Operation
0 ~ 60°C
Temperature
Relative
5 ~ 95%, non-condensing
Ordering Information
Humidity
GW 900g
ROCKY-6160-R10
PICMG Socket-478 533MHz FSB CPU Card with LCD/CRT
Remark Intel prescott CPU support up to 2.8 GHz
VGA, LAN, SATA, USB2.0 & Audio
ROCKY-6160G-R10
IEI Option PICMG Socket-478 533MHz FSB CPU Card with LCD/CRT
VGA, LAN, GbE, SATA, USB2.0 & Audio
CF-514 High performance Skiving Pentium® 4 CPU cooler
Note: For DVI function, please contact supplier
page 5-5

w w w. i e i w o r l d . c o m 1-22
 ROCKY-4784
PICMG Socket 478 533MHz FSB CPU
ROCKY-4783
PICMG Socket 478 533MHz FSB CPU Card
Card with VGA(32MB), LAN, GbE & Audio with VGA, LAN, USB 2.0, 1394 & Audio

Independent VGA SIS 315 chip with 32MB Prescott Ready Version coming soon !!
V-RAM on board

FSB 533 DDR 333

DDR 266 ™ FSB 533 ™

Feature Feature
Intel Pentium 4 CPU supports upto FSB 533 MHz Intel Pentium 4 CPU supports upto FSB 533 MHz
SiS 315 graphic chip with 32MB memory SiS 651 integrated graphic engine
DDR266 SDRAM memory support with ECC DDR333 SDRAM memory support
LAN, USB, Audio integrated LAN, IEEE-1394, USB 2.0, Audio integrated

Specifications Specifications
Socket-478 base support Intel® Pentium® 4 / Celeron™ up Socket-478 base support Intel® Pentium 4 / Celeron™ up to
CPU CPU
to 533 MHz FSB 533 MHz FSB
System Chipset Intel 845E+ ICH2 System Chipset SiS651 + 962
2x 184pin DIMM up to 2GB DDR SDRAM (DDR 200/266 2x 184pin DIMM up to 2GB DDR SDRAM (DDR 200/ 266/ 333
System Memory System Memory
MHz), support ECC function MHz)
SiS 315 2D/3D Graphics Engine Chipset integrated 2D/3D Graphics Engine (SiS 651)
AGP 4X bus bandwidth up to 533 MB/sec AGP 4 x bus
Display Resolutions: up to 1600x1200 (UXGA) Chipset integrated 2D/3D Graphic Engine
V-RAM: 32MB SDRAM onboard Display
Resolutions: up to 1600x1200 (UXGA)
Connector: DB-15 for CRT dispay V-RAM: share system memory up to 64MB
1x 10/100Mbps fast Ethernet controller on board (i82562, Connector: DB-15 for CRT display
Ethernet ICH2) Ethernet 1x 10/100Mbps fast Ethernet controller onboard (in SiS 962)
1x Gigabit LAN onboard (Broadcom 5702) SSD 1x Compact Flash™ Type II socket onboard
SSD 1x Compact Flash™ Type II IEEE-1394 3x port IEEE-1394a 400Mbps
– 2x RS-232 series port by pin header (16C550 UARTs – 2x RS-232 series port by pin header (16C550 UARTs
Compatible) Compatible)
– 1x LPT by pin header (support SPP/EPP/ ECP mode) – 1x LPT by pin header (support SPP/EPP/ ECP mode)
– 1x IrDA (SIR mode) – 1x IrDA (SIR mode)
I/O I/O
– 2x USB (USB 1.1 Compliant) – 4xUSB (USB 2.0 Compliant)
– 1x FDD channel support 1.44MB, 2.88MB and 3-mode – 1x FDD channel support 1.44MB, 2.88MB and 3-mode
– 2x ATA-100 IDE channel support CD-ROM; ZIP and LS-120 – 2x ATA-133 IDE channel support CD-ROM; ZIP and LS-120
bootable bootable.
AC’97 compliant Audio CODEC (Line-in, Line-out, Mic-in by AC’97 compliant Audio CODEC (Line-in, Line-out, Mic-in by pin
Audio Audio
pin header) header)
WDT software programmable support 1~255 second system reset WDT software programmable support 1~255 second system reset
ISA Plus™ Designed to enhance the ISA bus drive capability (64mA) ISA Plus™ Design to enhance the ISA bus drive capability (64mA)
Hardware Hardware
CPU Vcore; Vcc; CPU/System Fan speed and Thermal CPU Vcore; Vcc; CPU/System Fan speed and Thermal
Monitoring Monitoring
ATX power ATX power
Meets ACPI 1.1 Meet ACPI 1.1
control function control function
Power +5V@5A, [email protected], 12V power request min. 8A. Remark 8-bit ISA bus (LPC-ISA)
consumption (P4 2.2GHz CPU with 2GB DDR SDRAM, Windows 2000) Power [email protected], [email protected] (P4 2.0GHz CPU with 2GB DDR
Operating Temp 0~60°C (CPU cooler required) Consumption SDRAM, Windows 2000)
Relative Humidity 5-95%, non-condensing Operating Temp 0~60°C (CPU cooler required)
GW 1kg Relative
5-95%, non-condensing
Humidity
GW 900g
Ordering Information
ROCKY-4784EVG Ordering Information
PICMG Socket 478 Base SBC with VGA(32MB), Audio, LAN and
Gigabit LAN ROCKY-4783EV
PICMG Socket 478 533MHz FSB CPU Card with VGA, LAN,
ROCKY-4784EV
USB 2.0, 1394 & Audio
PICMG Socket 478 Base SBC with VGA(32MB), Audio, LAN

IEI Option IEI Option

CB-USB02 Dual ports USB cable with bracket CB-USB02 Dual ports USB cable with bracket
page 5-6 CB-IEEE1394 Dual ports IEEE-1394 cable page 5-6
CF-514 High performance Skiving Pentium® 4 CPU cooler CF-514 High performance Skiving Pentium® 4 CPU
page 5-5 cooler page 5-5

1-23 w w w. i e i w o r l d . c o m
 ROCKY-4782
PICMG Socket 478 400MHz FSB CPU
ROCKY-3732
PICMG Dual Socket 370 133MHz FSB CPU
Card with VGA, Dual LAN & Audio Card with VGA, Dual LAN, SCSI & Audio
Single
Independent VGA SIS 315 chip with 32MB Board
V-RAM on board Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane
tin
®

FSB 400 ™ ™ Tuala por ts

pentium
®
� Su p CF II LCD
Product
Series
Feature Feature Rear side
Intel Pentium 4 CPU supports upto FSB 400 MHz
Dual Intel PIII / Tualatin / Celeron CPU supports upto FSB 133 MHz
SiS 315 graphic chip with 32MB memory Chassis
SiS 6326 graphic chip with 4MB memory
DDR200 SDRAM memory support
PC133 SDRAM memory support
LAN, USB, Audio integrated
LAN, Ultra160 SCSI(option), USB, Audio integrated
Power
supply
Specifications Specifications
CPU Supports Intel® Socket 478 Pentium® 4 with 400MHz system bus Dual Socket-370 Processor support Tualatin Celeron™
System CPU
Intel® 845 Chipset (P-PGA) / Pentium® III (FC-PGA) up to 133MHz FSB Peripheral
Chipset
System Chipset VIA VT82C694T/VT82C686B
System
2 x 168 pin DIMM up to 2GB SDRAM System Memory 4 x 168-pin DIMM sockets up to 2GB SDRAM
Memory
Display SIS 6326 with 4MB V-RAM
Ultra high Performance Graphic Chip : SIS315 with 32MB SDRAM
Display AGP interface : AGP 4X, 266MHz Ethernet Dual Intel® 82559 10/100Mbps LAN Chip
Built-in 256-bit 3D engine up to 2048x2048 texture size Compact Flash™ Type II Socket supports Compact Flash and
SSD
Ethernet Dual LAN Built-in Intel 845 chipset(i82562) and i82559 Chip IBM MicroDrive
Supports Compact Flash™ Type II Socket for CF or IBM Audio AC’97 compliant Audio CODEC
SSD
MicroDrive. – 2 x RS-232 serial port (16C550 UARTs compatible)
Audio AC’97 compliant Audio CODEC – 1 x parallel port (SPP/EPP/ECP)
– 2 x RS-232 serial port (16C550 UARTs compatible) – 2 x USB 1.1 (Pin header)
I/O
– 1 x parallel port (SPP/EPP/ECP) – 1 x IrDA (SIR)
– 4 x USB 1.1 (Pin header) – 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function
I/O – 2 x ATA-100 channels
– 1 x IrDA (SIR)
– 1 x FDD port, support 1.44/2.88MB & 3-mode function SYMBIOS 53C1010R
– 2 x ATA-100 IDE channels – Interface : 2 x Ultra160 SCSI(160MB/Sec. 68-pin connector)
Hardware CPU Vcore, Vcc, CPU/ System fan speed and temperature SCSI Controller – Drivers : Microsoft Windows NT/2000/95/98, Novell Netware,
monitoring detecting function SCO Openserver, SCO UnixWare, IBM OS/2, Linux and Sun
Solaris.
Power
ATX power control function WDT software programmable, support 1~ 255 sec. system reset
Control
WDT software programmable, support 1~ 255 sec. system reset Power Control Support ATX power control function
Power Power
[email protected], [email protected] (with 2GHz Pentium 4 and 1GB Memory) +5V@15A, +12V@350mA (Dual PIII 1GHz and 2GB SDRAM)
Consumption Consumption
Operating Operating
0~60°C (CPU cooler required) 0~60°C ( CPU cooler required)
Temp Temp.
Relative Relative
5-95%, non-condensing 5~95%, non-condensing
Humidity Humidity
GW 900g GW 900g

Ordering Information Ordering Information

ROCKY-4782E2V ROCKY-3732EVS-R2
PICMG Dual Socket 370 133MHz FSB CPU Card with VGA, Dual
PICMG Socket 478 400MHz FSB CPU Card with VGA, Dual LAN &
LAN, SCSI & Audio, R2
Audio
ROCKY-4782EV ROCKY-3732EV-R2
PICMG Dual Socket 370 133MHz FSB CPU Card with VGA, Dual
PICMG Socket 478 400MHz FSB CPU Card with VGA, LAN & Audio
LAN & Audio, R2

IEI Option IEI Option

CB-USB02 Dual ports USB cable with bracket
CB-USB02
CF-514 High performance Skiving Pentium® 4 CPU cooler
Dual ports USB cable with bracket
page 5-5 page 5-6

w w w. i e i w o r l d . c o m 1-24
 ROCKY-3742
PICMG Dual Socket 370 133MHz FSB
ROCKY-3722
PICMG Dual Socket 370 100MHz FSB CPU
CPU Card with VGA, LAN, 1394 & Audio Card with VGA, Dual LAN, SCSI & Audio

Feature ™

™ CF II
Dual Intel PIII / Celeron CPU supports upto FSB 100 MHz
SiS 6326 graphic chip with 4MB memory
Rear side PC100 SDRAM memory support
LAN, Ultra160 SCSI(option), USB, Audio integrated
Feature
Dual Intel PIII / Celeron CPU supports upto FSB 133 MHz
Specifications
SiS 6326 graphic chip with 4MB memory Dual Socket 370 base support Celeron® (P-PGA)/
CPU
PC133 SDRAM memory support Pentium® III (FC-PGA) CPU up to 100MHz FSB
LAN, IEEE-1394(option), Audio integrated BIOS Award BIOS
System
Intel® 440BX
Chipset
System
Specifications Memory
4 x168-pin DIMM sockets up to 1GB SDRAM
– Chip : SiS 6326
Dual Socket-370 Processor support Celeron™ (PPGA)/Pentium® – V-RAM : 4MB
CPU Display
III (FC-PGA) up to 133MHz FSB – Resolution : 1600 x 1200 (256 colors)
System – Connector : DB-15 for CRT display
VIA VT82C694X/VT82C686B Two Intel 82559 10/100Mbps Ethernet chips with RJ-45 connectors,
Chipset Ethernet
support AOL & WOL function
System SSD One DiskOnChip™ socket
4 x 168-pin DIMM sockets up to 2GB SDRAM
Memory – 2 x RS-232 serial port (16C550 UARTs compatible)
Display SiS 6326 with 4MB V-RAM – 1 x parallel port (SPP/EPP/ECP)
Ethernet 1 x Intel 82559 10/100Mbps LAN Chip – 2 x USB 1.1 (Pin header)
I/O
– 1 x IrDA (SIR)
Compact Flash™ Type II Socket to support Compact Flash and – 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function
SSD
IBM MicroDrive HDD. – 2 x ATA-33 IDE channels
Audio AC’97 compliant Audio CODEC – Chip : SYMBIOS 53C1010
– 2 x RS-232 serial port (16C550 UARTs compatible) – Interface : 2 x Ultra160 SCSI (160MB/Sec.; 68-pin connector)
SCSI
– 1 x parallel port (SPP/EPP/ECP) – Drivers : Microsoft Windows NT, Windows 2000, Windows 95/98,
Controller
– 2 x USB 1.1 (Pin header) Novell NetWare, SCO Openserver, SCO UnixWare, IBM OS/2, Linux and
I/O Sun Solaris
– 1 x IrDA (SIR)
WDT software programmable, support 1~ 255 sec. system reset
– 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function Hardware
– 2 x ATA-100 channels Function chip on board
monitor
TI TSB43AA22 chipset up to 100/200/400 Mbps Fully supports ISA Plus™ Designed to enhance the ISA bus drive capability
1394 provisions of IEEE 1394-1995 standard for high performance Power
Supports ATX power control function
serial bus Control
WDT software programmable, support 1~ 255 sec. system reset Power [email protected], +12V@350mA, -12V@50mA (Dual Pentium III and 512MB
Consumption SDRAM)
Power Control Support ATX power control function Operating
Power 0~60°C(CPU cooler required)
Temperature
+5V@15A, +12V@350mA (Dual PIII 1GHz and 2GB SDRAM)
Consumption Relative
5~95%, non-condensing
Operating Humidity
0~60°C ( CPU cooler required) GW 900g
Temp.
Note ROCKY-3722EVS shipping with one U160-CB01 cable
Relative
5~95%, non-condensing
Humidity
Ordering Information
Ordering Information ROCKY-3722EVS-R2
PICMG Dual Socket 370 100MHz FSB CPU Card with VGA, Dual
LAN, SCSI & Audio R2
ROCKY-3742EVF
PICMG Dual Socket 370 133MHz FSB CPU Card with VGA, LAN, ROCKY-3722EV-R2
1394 & Audio PICMG Dual Socket 370 100MHz FSB CPU Card with VGA, Dual
LAN & Audio, R2
ROCKY-3742EV
PICMG Dual Socket 370 133MHz FSB CPU Card with VGA, LAN & ROCKY-3722V-R2
Audio PICMG Dual Socket 370 100MHz FSB CPU Card with VGA &
Audio, R2

IEI Option IEI Option

U320-CB01 Internal Ultra320 SCSI cable
CB-USB02 CB-U320EXT External Ultra320 SCSI connector
Dual ports USB cable with bracket CB-USB02 Dual ports USB cable with bracket
page 5-6 page 5-6

1-25 w w w. i e i w o r l d . c o m
 ROCKY-3786 PICMG Socket 370 133MHz FSB CPU Card with
VGA, LAN, GbE, USB 2.0 & Audio
CF II Single
Intel® 815EB Intel 82540 GbE Board
USB 2.0 Long Term Supports Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
VGA
EPIC NANO
3.5” WAFER
Speaker ETX
PC/104
10/100 Mbps Ethernet Add-on Card
IVC Card
GbE
Backplane

K/M
LCD
Product
Series
PCI Bus ISA Bus
tin
Tuala por ts Feature
S up Chassis
Intel PIII / Tualatin / Celeron CPU supports upto FSB 133 MHz
Intel Graphic integrated graphic engine
™
PC133 SDRAM memory support upto 512MB Power
LAN, USB 2.0(option), Audio integrated supply
Tech Talk
Specifications Boot from your USB Device!! Peripheral
Supports Intel® Coppermine/Tualatin socket 370 series USB stands for Universal Serial Bus within Plug and Play features
CPU Pentiuml® III and Celeron™ CPU with 66/100/133MHz as populate peripheral interface appliance between human and
FSB computers. USB booting technology is benefit for both system
System chipset Intell® 815E B stepping chipset integrators and develops on free of selecting the right serial port,
System memory 2x 168-pin SDRAM socket maximum up to 512MB installing expansion cards, or the technical headaches of dip
switches, jumpers, software drivers, IRQ settings, DMA channels
– Built-in 815 chipset
– V-RAM: Shared with system memory (DVMT and I/O address.
Display technology)
– Resolution: Up to 1600x1200, 8bit color USB Devices Bootable Function Supporting CPU Cards
– Connector: DB-15 for CRT display Model Name BIOS version Model Name BIOS version
1x on board Compact Flash™ Type II socket for CF disk SAGP-865EVG V1.0 ICPMB-7660 V1.0
SSD
or IBM Microdrive SAGP-845 V1.0 ICPMB-7760 V1.0
Audio Onboard AC’97 compliant audio CODEC SAGP-4620EV V1.0 ICPMB-2661 V1.0
– 1x onboard 10/100bps fast Ethernet controller ROCKY-4786E2V V1.0 ICPMB-2660 V1.0
Ethernet
– 1x onboard Intel 82540 Gigabit Ethernet controller ROCKY-4786 V1.0 POS-478 V1.0
– 2x RS-232 serial ports (16C550 UARTs compatible) by ROCKY-6160 V1.0 POS-380 V1.0
pin header ROCKY-4784EVG V1.3 POS-370 V2.2
– 1x LPT parallel port by pin header (supports SPP/EPP/
ROCKY-4783EV V1.1 POS-EDEN-400 V1.0
ECP mode)
– 1x IrDA (SIR mode) ROCKY-4782EV V1.4 NOVA-7170 V1.0
I/O – 2x USB 1.1 port by pin header ROCKY-3732EVS V1.2 NOVA-8890 V1.0
– 4x USB 2.0 port by pin header (Optional) ROCKY-3786EVG V1.2 NOVA-7898 V1.1
– 2x ATA/100 IDE channel supports CD-ROM, ZIP and ROCKY-3785EVG V1.4 NOVA-7896 V2.3
LS-120 drive bootable ROCKY-3705EV V2.1 NOVA-7895FW V1.3
– 1x FDD connector, support 1.44/2.88MB and 3-mode
ROCKY-C800EV V1.4 NOVA-7894 V1.0
floppy drive
ROCKY-C400 V1.0 NOVA-7830 V1.0
Software programmable supports 1~255 seconds system
WDT PSB-4710EV V1.0 NOVA-7820 V1.0
reset
PCISA-3716E2V V3.1 NOVA-C400 V1.0
CPU Vcore, Vcc, CPU/System fan speed and
Hardware Monitoring PCISA-C400 V1.0 NANO-7270 V1.0
temperature detecting function
PCISA-C800EV V1.0 NANO-7240 V1.0
Power control Meets ACPI 1.1 specification, comes with external power
function connector of 5V input JUKI-3711P-T V1.5 WAFER-C400EV V1.0
JUKI-C400 V1.0 WAFER-E669E2V V1.0
[email protected], 12V@230mA (Intel 1GHz CPU with 256MB
Power Consumption ICPMB-8650 V1.0 ETX-C400 V1.0
memory)
Operating ICPMB-8660 V1.0 ETX-5800 V1.0
0~60°C
Temperature
Relative Humidity 5~95%, non-condensing
GW 900g Ordering Information
ROCKY-3786EV-R11
IEI Option PICMG Socket 370 133MHz FSB CPU Card with VGA, LAN & Audio
ROCKY-3786EVGU2-R11
CB-USB02 PICMG Socket 370 133MHz FSB CPU Card with VGA, LAN, GbE,
Dual ports USB cable with bracket page 5-6 USB 2.0 & Audio

w w w. i e i w o r l d . c o m 1-26
 ROCKY-3785 ROCKY-3782
PICMG Socket 370 133MHz FSB CPU PICMG Socket 370 133MHz FSB CPU Card with
Card with VGA, LAN & Audio VGA, Dual LAN, SCSI Ultra160 & Audio

Rear side
tin
Tuala por ts ™
™
S u p
Feature Feature
CF II

Intel PIII / Tualatin / Celeron CPU supports upto FSB 133 MHz
Intel Graphic integrated graphic engine Intel PIII / Celeron CPU supports upto FSB 133 MHz
PC133 SDRAM memory support upto 512MB Intel Graphic integrated graphic engine
LAN, Audio integrated PC133 SDRAM memory support upto 512MB
LAN, USB, Ultra160 SCSI, Audio integrated

Specifications Specifications
Socket 370 support Tualatin, Pentium® III, Cerelon™ CPU Socket 370 base support Celeron™ / Pentium® III up to
CPU CPU
with 66/100/133MHz FSB 133MHz FSB
BIOS Award PnP Flash BIOS
System Chipset Intel® 815E B stepping System Chipset Intel® 810E
System Memory Two 168-pin DIMM sockets up to 512MB SDRAM
System Memory Max. 512MB, 2xDIMM PCI-ISA Bridge ITE IT8888
Integrated in 810E chipset with share memory architecture,
Display
Intel 815E chipset integrated with share memory architecture max. resolution1600 x 1200 (256 colors)
Display
(DVMT)Resolution Max. 1600x1200, 8-bit colors Dual Intel® 82559 10/100Mbps Ethernet chips with two RJ-45
Ethernet
connectors, support AOL & WOL Function
Ethernet – 1 x 10/100Mbps : Built-in Intel® 815E chipset (i82562ET) SSD One CompactFlash™ socket
Audio AC’97 compliant Audio CODEC
– 2 x RS-232 serial port (16C550 UARTs compatible)
Audio AC’97 compliant Audio CODEC – 1 x parallel port (SPP/EPP/ECP)
– 2 x USB 1.1 (Pin header)
I/O
– 2 x RS-232 serial port (16C550 UARTs compatible) – 1 x IrDA (SIR)
– 1 x parallel port (SPP/EPP/ECP) – 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function
– 2 x USB 1.1 (Pin header) – 2 x ATA-66 IDE channels
I/O – Chip : SYMBIOS® 53C1010 Ultra160 SCSI chip
– 1 x IrDA (SIR)
– 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function SCSI – Transfer Rate : 160MB/Sec.
– 2 x ATA-100 channels – Connectors : Two 68-pin connectors
WDT software programmable, support 1~ 255 sec. system reset
ISA Plus™ Designed to enhance the ISA bus drive capability
Hardware monitor Supported
Power control Supports ATX power control function
Power Control Power +5V@5A, +12V@200mA, -12V@50mA (Pentium® III 500MHz
ATX power control function
Function Consumption and 128MB SDRAM)
Operating
WDT software programmable, support 1~ 255 sec. system reset 0 ~60°C (CPU cooler required)
Temperature
Relative
Power [email protected], 12V@230mA (Intel 1GHz CPU with 256MB 5~95%, non-condensing
Humidity
Consumption Memory)
GW 900g
Operating Note ROCKY-3782EVS shipping with one U160-CB01 cable
0~60°C (CPU cooler required)
Temperature
Ordering Information
Relative Humidity 5-95%, non-condensing
ROCKY-3782EVS
GW 900g PICMG Socket 370 133MHz FSB CPU Card with VGA, Dual
LAN, SCSI Ultra160 & Audio
ROCKY-3782EV
Ordering Information PICMG Socket 370 133MHz FSB CPU Card with VGA, Dual
LAN & Audio
ROCKY-3785EV-R11
PICMG Socket 370 133MHz FSB CPU Card with VGA, LAN &
ROCKY-3782V
PICMG Socket 370 133MHz FSB CPU Card with VGA & Audio
Audio

IEI Option IEI Option

U160-CB01 Internal Ultra160 SCSI cable
CB-USB02
CB-U160EXT External Ultra160 SCSI connector
Dual ports USB cable with bracket
page 5-6 CB-USB02 Dual ports USB cable with bracket page 5-6

1-27 w w w. i e i w o r l d . c o m
 ROCKY-3708 ROCKY-3706
PICMG Socket 370 133MHz FSB CPU PICMG Socket 370 133MHz FSB CPU Card with
Card with VGA (32MB), Dual LAN & Audio 64bit/ 66MHz PCI, VGA, LAN, GbE

Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
tin tin
Tuala por ts
IVC Card
Tuala por ts ™

u p Backplane
™
Su p S
Feature Feature LCD
Product
Intel PIII / Tualatin / Celeron supports CPU upto FSB 133 MHz Intel PIII / Tualatin / Celeron supports CPU upto FSB 133 MHz Series
SiS 315 graphic chip with 32MB memory ATi Rage XL with 8MB memory
PC133 SDRAM memory support upto 1GB PC133 SDRAM memory with ECC support upto 2GB
LAN, USB, Audio integrated PCI-64 slots extension ability supported
Chassis

Specifications Specifications
Power
Socket-370 base 66/100/133MHz FSB CPU up to Intel P3 Socket-370 base 100/133MHz FSB Tualatin, Pentium® III,
CPU CPU supply
Tualatin CPU Cerelon™
System Chipset SiS 635T chipsets System
System ServerWorks LE-T chipset
2 x DIMM (168-pin) up to 1GB SDRAM Chipset
Memory Advanced Peripheral
Maximizes IO bandwidth for the next generation of 64-bit PCI
SiS 315 with 32MB SDRAM, DB-15 for CRT AGP interface:AGP 64-bit PCI
cards.Up to 528MB data bandwidth
Display 4X, 266MHz, 1GByte data bandwidth Built-in 256-bit 3D engine Technology
up to 2048 texture size System
2x10/100Mbps Ethernet with RJ-45 (SiS 635T build-in & Intel max. 2GB SDRAM support, Registered 72-bit ECC module only.
Ethernet Memory
82559)
1 x CompactFlash™ Type II Socket support Flash Disk or IBM ATI Rage XL 2D / 3D VGA controller, V-RAM 8MB SDAM on
SSD Display
Micro Drives (option) board
1x PCI hardware sound (C-Media 8738) on board 1xLine-in, 2x10/100Mbps Ethernet with RJ-45 (SiS 635T build-in & Intel
Audio Ethernet
1xLine-out, 1xSub-out, 1x Micro-in, 1 x Rear-out 82559)
– 2 x RS-232 serial port
– 1 x parallel port (SPP/EPP/ECP) – 2 x RS-232 serial port
– 2x USB 1.1 (Pin header) – 1 x parallel port (SPP/EPP/ECP)
I/O – 2x USB 1.1 (Pin header)
– 1x channel support 2x3.5” FDD, support 1.44MB,
– 2 x ATA-100 channel support HDD, CDROM, LS-120, and ZIP. I/O – 1 x IrDA
– 1x PS/2 controller – 1x FDD port, support 1.44MB,
Hardware – 2.88MB, 3-mode function
Supported – 2 x ATA-33 channel support HDD, CDROM, LS-120, and ZIP.
monitor
Power control ATX power control function Power control ATX power control function
WDT Software programmable, support 1~ 255 sec. system reset
ISA Plus™ Designed to enhance the ISA bus drive capability WDT software programmable, support 1~ 255 sec. system reset
Power Power
1x ATX 20-pin connector [email protected], 12V@170mA(Intel 1GHz CPU with 256MB Memory)
connector Consumption
Interface PICMG 338 x 122mm (13.3” x 4.8”)
Operating Operating
0~55°C (CPU cooler required) 0~60°C (CPU cooler required)
Temperature Temp
Relative Relative
5-95%, non-condensing 5-95%, non-condensing
Humidity Humidity
GW 900g GW 900g
Remark 8-bit ISA bus (LPC-ISA)
While implement on 1U solution, low profile ECC RAM module
Note
is ewquired
Ordering Information
ROCKY-3708E2V
Ordering Information
PICMG Socket 370 133MHz FSB CPU Card with VGA (32MB), Dual ROCKY-3706EVG
LAN & Audio PICMG Socket 370 133MHz FSB CPU Card with 64bit/ 66MHz
ROCKY-3708EV PCI, VGA, LAN, GbE
PICMG Socket 370 133MHz FSB CPU Card with VGA (32MB), LAN & ROCKY-3706EV
Audio PICMG Socket 370 133MHz FSB CPU Card with 64bit/ 66MHz
PCI, VGA, LAN
IEI Option
IEI Option
CB-USB02
Dual ports USB cable with bracket CB-USB02
page 5-6 Dual ports USB cable with bracket page 5-6

w w w. i e i w o r l d . c o m 1-28
 ROCKY-3705 ROCKY-3703
PICMG Socket 370 133MHz FSB CPU
PICMG Socket 370 133MHz FSB CPU
Card with with VGA, LAN & Audio Card with VGA, Dual LAN & Audio

tin
™
Tuala por ts
S u p ™

Feature Feature
Intel PIII / Tualatin / Celeron supports CPU upto FSB 133 MHz Intel PIII / Celeron CPU supports upto FSB 133 MHz
SiS 630ET integrated graphic engine VIA PM133 integrated graphic engine
PC133 SDRAM memory support upto 1GB PC133 SDRAM memory support upto 1.5GB
LAN, USB, Audio integrated LAN, USB, ATA100 RAID, Audio integrated

Specifications Specifications
CPU Socket-370 base 66/100/133MHz FSB Celeron™ / Pentium® III Socket-370 base 66/100/133MHz FSB support Celeron™
CPU
/Pentium® III
BIOS Award PnP BIOS
System Chipset SiS 630ET System
VIA PM133
Chipset
System
Two 168-pin DIMM sockets up to 1GB SDRAM System
Memory Three 168-pin DIMM sockets up to 1.5GB SDRAM/VCM/ESDRAM
Memory
– Integrated in SiS630ET Chipset
– Bus:AGP 66MHz – Chipset Integrated Savage4 2D/3D/Video Accelerator
Display – V-RAM: Share with system memory up to 64MB RAM Display – 2-32MB frame buffer using system memory(SMA)
– Resolution: 1600 x 1200 (16-bit colors) – 2D/3D resolutions up to 1920x1440
– Connector: DB-15 for CRT display
Ethernet Dual Intel® 82559 10/100Mbps LAN Chip
Ethernet 10/100Mbps by SiS630ET Chipset Support WOL function
Audio AC’97 compliant Audio CODEC
SSD Support Compact Flash™ Type II Socket
SSD Support DiskOnChip™ Socket
Audio AC’97 compliant Audio CODEC
– 2 x RS-232 ports (16C550 UARTs compatible)
– 2 x RS-232 serial port (16C550 UARTs compatible) – 1 x LPT parallel port (SPP/EPP/ECP)
– 1 x parallel port (SPP/EPP/ECP) – 4 x USB 1.1
I/O
– 2 x USB 1.1 (Pin header) – 1 x IrDA (SIR)
I/O
– 1 x IrDA (SIR) – 1 x FDD support 1.44MB, 2.88MB and 3-mode
– 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function – 2 x ATA-100 channels from PM133 chipset
– 2 x ATA-100 IDE channels
WDT Software programmable, support 1~ 255 sec. system reset
WDT software programmable, support 1~ 255 sec. system reset Power control Support ATX power control function
Power control Support ATX power control function ISA Plus Designed to enhance the ISA bus drive capability
Power 5V@6A, 12V@170mA (Pentium® III 500MHz CPU and 512MB
Power
Consumption SDRAM) 5V@5A, 12V@170mA(PIII 850MHz and 256MB SDRAM)
Consumption
Operating
0~60°C (CPU cooler required) Operating
Temperature 0~60°C (CPU cooler required)
Temperature
Relative
5~95%, non-condensing Relative
Humidity 5~95%, non-condensing
Humidity
GW 900g
GW 900g
Remark 8-bit limited ISA (LPC-ISA)

Ordering Information Ordering Information

ROCKY-3705EV-R2 ROCKY-3703EV
PICMG Socket 370 133MHz FSB CPU Card with with VGA, LAN PICMG Socket 370 133MHz FSB CPU Card with VGA, Dual
& Audio, R2 LAN & Audio

IEI Option IEI Option

CB-USB02 CB-USB02
Dual ports USB cable with bracket Dual ports USB cable with bracket
page 5-6 page 5-6

1-29 w w w. i e i w o r l d . c o m
 ROCKY-3702
PICMG Socket 370 100MHz FSB CPU
ROCKY-3701
PICMG Socket 370 100MHz FSB CPU
Card with VGA(8MB), LAN, DOC Card with 4 x COM, CFII
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
™ Backplane
™

CF+ Type LCD

Feature II Socket Product
Series
Intel PIII / Celeron CPU supports upto FSB 100 MHz Feature Rear side
ATi Rage Mobility-M with 4MB memory
PC100 SDRAM memory support upto 512MB Intel PIII / Celeron CPU supports upto FSB 100 MHz Chassis
LAN, USB integrated PC100 SDRAM memory support upto 512MB
LAN, USB integrated
Specifications CF-II socket + DOC sockets for SSD device Power
supply
Socket 370 base support Celeron™ /Pentium® III up to 100MHz
CPU
FSB Specifications
System
Intel 440BX Peripheral
Chipset
System Socket 370 base 66/100MHz FSB CPU Celeron™ /
4 x 168-pin DIMM sockets up to 512MB SDRAM CPU
Memory Pentium® III
– ATi Rage Mobility-M
– Bus : AGP 2x
– V-RAM : 4MB (ROCKY-3702EV-R6) System Chipset Intel® 440BX
Display
8MB (ROCKY-3702EV-R6V8)
– Resolution :1600 x 1200 (64k colors) System Memory Four 168-pin DIMM sockets up to 1GB SDRAM
– Connector : DB-15 for CRT display
Realtek RTL8100BL 10/100Mbps Ethernet chip with RJ-45 One DiskOnChip™ Socket and one CF+ Type II socket on
Ethernet SSD
connector solder side
SSD One DiskOnChip™ socket
– 2 x RS-232 serial port (16C550 UARTs compatible) – 4 x RS-232 serial port (16C550 UARTs compatible)
– 1 x parallel port (SPP/EPP/ECP) – 1 x parallel port (SPP/EPP/ECP)
– 2 x USB 1.1 (Pin header) – 2 x USB 1.1 (1 by Pin header)
I/O I/O
– 1 x IrDA (SIR) – 1 x IrDA (SIR)
– 1 x FDD port, support 1.44MB, 2.88MB, 3-mode unction – 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function
– 2 x ATA-66 IDE channels – 2 x ATA-66 IDE channels
WDT software programmable, support 1~ 255 sec. system reset
Hard monitor LM78 hardware monitoring chip on board software programmable, support 1~ 255 sec. system reset LM78
ISA Plus™ Designed to enhance the ISA bus drive capability WDT
hardware monitoring chip on board
A non-volatile 1Kbit EEPROM is provided to retain application
E²Key™
critical read/write data ISA Plus™ Designed to enhance the ISA bus drive capability
Power control Supports ATX power control function
Power [email protected], +12V@170mA, -12V @60mA(Celeron™ 333MHz Power control Supports ATX power control function
Consumption CPU and 512MB SDRAM)
Operating Power [email protected], +12V@170mA, -12V@60mA (Celeron 333MHz
0~60°C (CPU cooler required)
Temperature Consumption CPU and 512MB SDRAM)
Relative
5~95%, non-condensing
Humidity Operating
GW 900g 0~60°C (CPU cooler required)
Temperature

Ordering Information Relative

Humidity
5~95%, non-condensing

ROCKY-3702EV-R6
GW 900g
PICMG Socket 370 100MHz FSB CPU Card with VGA(4MB), LAN,
DOC, R6
ROCKY-3702EV-R6V8
PICMG Socket 370 100MHz FSB CPU Card with VGA(8MB), LAN,
DOC, R6
Ordering Information
IEI Option
ROCKY-3701BX
CB-USB02 PICMG Socket 370 100MHz FSB CPU Card with 4 x COM, CFII
Dual ports USB cable with bracket
page 5-6

w w w. i e i w o r l d . c o m 1-30
 ROCKY-772
PICMG Socket A 200MHz FSB CPU Card
ROCKY-C800
PICMG VIA C3 1GHz CPU Card with
with VGA, Dual Intel LAN & Audio VGA, Intel LAN & Audio

™ ™ 1GHz
CPU

Feature Feature
VIA C3 1GHz CPU
AMD Athlon / Duron CPU support upto FSB 266 MHz
VIA 8601 integrated graphic engine
VIA KL133 integrated graphic engine
PC133 SDRAM memory support upto 1GB
PC133 SDRAM memory support upto 1.5GB
LAN, USB, Audio integrated
LAN, USB, Audio integrated

Specifications
Specifications CPU Embedded VIA C3 CPU 1GHz (EBGA package) with FAN
Socket-A for AMD / Athlon® / Duron® 200/266MHz FSB System Chipset VIA 8601A + 686B, PCI 2.2 compliant
CPU
Procesor System Memory 2x DIMM up to 1GB SDRAM
System Chipset VIA KL133A Chipset – 64-bit Single Cycle 2D/3D Graphics Engine (VIA 8601A)
System – AGP 4X bus bandwidth up to 533 MB/sec
Three 168-pin DIMM sockets up to 1.5GB SDRAM – Resolutions: up to 1600x1200 (UXGA)
Memory
– Chipset integrated Savage4 Graphic Core Display – Integrated 24-bit 230MHz True Color DAC
– Full AGP 4X and 2D/3D resolutions up to 1920x1440 – V-RAM: Share system memory up to 8MB
Display – V-RAM : Share with system memory up to 32MB RAM – Support I²C bus interface
– High Quality DVD video playback – Connector: DB-15 for CRT display
– Connector : DB-15 for CRT display 1x 10/100Mbps fast Ethernet controller onboard (Intel 82559 /
Ethernet
Dual 10/100Mbps Ethernet controller on board Intel 82559 Realtek RTL8100B)
Ethernet LAN Chip x 2 (ROCKY-772NEV) Realtek 8100 LAN Chip x 2 1x DiskOnChip™ socket and 1x CompactFlash™ type II socket
SSD
(ROCKY-772REV) onboard
SSD Support DiskOnChip™ and Compact Flash™ Type II Socket – 2x RS-232 series port by pin header (16C550 UARTs Compatible)
Audio AC’97 compliant Audio CODEC – 1x LPT by pin header (support SPP/EPP/ ECP mode)
– 2 x RS-232 (16C550 UARTs compatible) – 1x IrDA by pin header (SIR mode)
– 1 x LPT (support SPP/EPP/ECP mode) – 3xUSB port by pin header (USB 1.1 Compliant), one USB on
I/O
– 4 x USB 1.1 ports bracket
I/O – 1x FDD channel support 1.44MB, 2.88MB and 3-mode
– 1 x IrDA (SIR mode)
– 1 x FDD port – 2x ATA-100 IDE channel support CD-ROM; ZIP and LS-120
– 2 x ATA-100 IDE channel bootable.
Hardware Audio AC’97 compliant Audio CODEC
Support
monitor
ISA Plus Designed to enhance the ISA bus drive capability WDT software programmable support 1~255 second system reset
WDT software programmable, support 1~ 255 sec. system reset ISA Plus™ Design to enhance the ISA bus drive capability (64mA)
Power Control Support ATX power control functionn Hardware
CPU Vcore; Vcc; CPU/System Fan speed and Thermal
Power Monitor
[email protected], +12V@280mA (Athlon 1.4G, 1.5GB SDRAM)
Consumption
Power Control Meets ACPI 1.1
Operating Temp 0~50°C (CPU cooler required)
Relative Power +5VSB@180mA, +12V@170mA, [email protected] (VIA C3 800MHz
5-95%,non-condensing
Humidity Consumption CPU with 512MB SDRAM x 2, Windows 2000)
GW 900g Operating Temp 0~60°C (CPU cooler required )
Relative
5-95%, non-condensing
Humidity
Ordering Information GW 900g
ROCKY-772NEV
PICMG Socket A 200MHz FSB CPU Card with VGA, Dual Intel Ordering Information
LAN & Audio
ROCKY-772REV ROCKY-C800EVN-1G
PICMG Socket A 200MHz FSB CPU Card with VGA, Dual Realtek PICMG VIA C3 1GHz CPU Card with VGA, Intel LAN & Audio
LAN & Audio ROCKY-C800EVR-1G
PICMG VIA C3 1GHz CPU Card with VGA, Realtek LAN & Audio

IEI Option
CF-508 AMD K7 CPU Cooler
IEI Option
page 5-5
CB-USB02
CB-USB02 Dual ports USB cable with bracket Dual port USB cable with bracket
page 5-6 page 5-5

1-31 w w w. i e i w o r l d . c o m
 ROCKY-C400 PICMG Intel ULV Celeron 400 CPU Card
with VGA, Intel LAN & Audio

All-in-One Fan-less Solution Ready !! Single

Board
CFII Support IBM Micro Computer
DOC up to 288MB Drive,Compact Flash Memory Card
PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
VGA
3.5” WAFER
ETX
PC/104
Speaker
Add-on Card
10/100 Mbps IVC Card
Ethernet
Backplane

K/M LCD
Product
Series

PCI Bus ISA Bus

Feature Chassis

ULV Intel Celeron 400 MHz ™

VIA 8601 integrated graphic engine

Power
PC133 SDRAM memory support upto 1GB
LAN, USB 2.0, Audio integrated
Tech Talk supply

Specifications Ultra Low Voltage (ULV) Intel Celeron Peripheral

The Ultra Low Voltage (ULV) Celeron® processor is a brand-new 0.13
CPU Embedded Ultra Low Voltage Intel® Celeron 400MHz level process product of Intel®. With 256-KB L2 cache integrated and
System Intel® MMX™ media enhancement technology, ULV Celeron shows an
VIA VT8601T + 686B
chipset excellent performance in Low-power consumption appliance region.
System
2 x DIMM up to 1GB SDRAM
Memory
– 64-bit Single Cycle 2D/3D Graphics Engine (VIA 8601T)
– AGP 4X bus bandwidth up to 533 MB/sec
Product Highlights
Low Power Consumption
– Resolutions: up to 1600x1200 (UXGA)
Fanless embedded system solution of high performance.
Display – Integrated 24-bit 230MHz True Color DAC
– V-RAM: Share system memory up to 8MB Intel Celeron 400MHz Power Consumption comparison
– Support I2C bus interface Version Regular Low Voltage Ultra Low Votage
– Connector: DB-15 for CRT display Power(W) 23.5 11 5
1 x Disk On Chip socket and 1 x Compact FlashTM type II socket
SSD
onboard 32-KB non-blocking, level 1 (L1) cache.
1 x onboard 10/100Mbps Intel 82551ER / Realtek RTL8100B fast Two blocks of 16-KB L1 cache for instructions and data.
Ethernet
Ethernet controller
256-KB non-blocking integrated L2 cache.
Audio AC’97 compliant Audio CODEC
Advanced Transfer Cache (ATC) has a high bandwidth 256-bit interface
– 1 x RS-232/422/485 selectable port with Auto-Direction function
and CPU synchronous frequency enhanced by micro-architectural
– 1 x RS-232 serial port by pin-header
– 1 x LPT parallel port by pin-header (Supports SPP/EPP/ECP technology.
mode) Intel® MMX™ media enhancement technology.
– 1 x IrDA (SIR mode) 0.13 level manufacturing processes.
I/O – 4 x USB 2.0 ports (4 by pin header) Fully compatible with existing Intel Architecture-based software.
– 2 x ATA-100 IDE channel, supports CD-ROM, ZIP and LS-120 uFC-BGA2 Package form.
drive bootable
– 1 x PS/2 for Keyboard / Mouse ULV Intel Celeron CPU Supports Product
– 1 x FDD connector, support 1.44/2.88MB and 3-mode floppy Model Name Chipset Form Factor
drive ROCKY-C400 series VIA 8601T Full size PICMG Bus SBC
WDT Software programmable supports 1~255 seconds system reset PCISA-C400 series VIA 8601T Half size PCISA Bus SBC
ISA Plus™ Design to enhance the ISA bus drive capability (64mA) JUKI-C400 VIA 8606T Half size PCISA Bus SBC
Hardware Provides CPU Vcore / Vcc; CPU / System Fan speed and NOVA-C400 VIA 8606T 5.25” Embedded Board
Monitoring temperature detecting function WAFER-C400 VIA 8601T 3.5” Embedded Board
power control Meets ACPI 1.1 specification ETX-C400 VIA 8606T ETX CPU Module
Power NANO-7240 VIA 8606T EPIC Embedded Board
[email protected], 5VSB@180mA, 12V@170mA (512 MB SDRAM)
Consumption ICPMB-2660 VIA CLE266 ATX Motherboard
Operating
0 ~ 60ºC
Temperature
Relative
Humidity
5 ~ 95 %, non-condensing Ordering Information
GW 900g
ROCKY-C400N PICMG ULV Intel Celeron 400 CPU Card with
VGA, Intel LAN & Audio
IEI Option ROCKY-C400R PICMG ULV Intel Celeron-400 CPU Card with
VGA, Realtek LAN & Audio
CB-USB02 Note
Dual ports USB cable with bracket For Intel® Celeron 650MHz / LV Pentium® III 800MHz CPU
page 5-6 supports, please contact supplier

w w w. i e i w o r l d . c o m 1-32
 ROCKY-538 ROCKY-548
PICMG Socket 7 66MHz FSB CPU Card
PICMG Socket 7 66MHz FSB CPU Card
with VGA(4MB), DOC with DOC

™
™

Feature Feature
Intel PentiumMMX CPU supports upto FSB 66 MHz
ATi Rage Mobility-M with 4MB memory Intel PentiumMMX CPU support up to FSB 66 MHz
PC66 SDRAM memory support upto 256MB PC66 SDRAM memory support upto 256MB
USB, DOC socket integrated USB, DOC socket integrated

Specifications Specifications
CPU Type Socket-7 base support Intel® Pentium® MMX up to 66 MHz FSB Socket-7 base support Intel® Pentium® MMX, AMD® K6 up to
CPU Type
System 66 MHz FSB
Intel® 430TX
Chipset System Chipset Intel® 430TX
System System Memory 2 x 168-pin DIMM sockets support up to 256MB SDRAM
2 x 168-pin DIMM sockets support up to 256MB SDRAM
Memory
Display
N/A
ATI Rage Mobility-M Controller
BUS: AGP 2X
Display SSD 4 x DiskOnChip™ socket
V-RAM: 4MB SDRAM
Controller Ethernet N/A
Resolution: 1280 x 1024@24-bit
DB-15 for VGA 2 x RS-232
SSD 1 x DiskOnChip™ socket 1 x PS/2 for Keyboard
1 x PS/2 for Mouse
Ethernet N/A
1 x LPT supports SPP/ECP/EPP mode
I/O
2 x RS-232 2 x USB 1.0
1 x PS/2 for Keyboard 2 x ATA-33 IDE channels
1 x PS/2 for Mouse 1 x Floppy
1 x LPT supports SPP/ECP/EPP mode 1 x IrDA (SIR)
I/O
2 x USB 1.0
WDT Software Programmable supports 1~255 sec system reset
2 x ATA-33 IDE channels
1 x Floppy A non-volatile 1K-bit EEPROM is provided to retain application
E2Key
1 x IrDA (SIR) critical read/write data
WDT Software Programmable supports 1~255 sec system reset ISA Plus™ Designed to enhance the ISA bus drive capability

A non-volatile 1K-bit EEPROM is provided to retain application Hardware Provides CPU Vcore, Vcc, CPU/System fan speed and
E2Key Monitor temperature detecting function
critical read/write data
ISA Plus™ Yes Power +12V@70mA, +5V@7A, -12V@20mA, (Pentium® MMX
Consumption 200MHz with 32MB SDRAM)
Hardware Provides CPU Vcore, Vcc, CPU/System fan speed and
Monitor temperature detecting function Operation
0~60°C
Temperature
Power +12V@70mA, +5V@7A, -12V@20mA, (Pentium® MMX 200MHz
Consumption with 32MB SDRAM)
Operation
0~60°C
Temperature
GW 900g Ordering Information
ROCKY-548TX-R6
Ordering Information PICMG Socket 7 66MHz FSB CPU Card with DOC, R6

ROCKY-538TXV-R7
PICMG Socket 7 66MHz FSB CPU Card with VGA(4MB), DOC, R7
IEI Option
CB-USB02
IEI Option Dual ports USB cable with bracket page 5-6
CB-USB02 Dual ports USB cable with bracket
page 5-6 CF-502
Socket-7 CPU Cooler
CF-502 Socket-7 CPU Cooler CF-504
CF-504 Slim Type Copper Socket-7/370 CPU Cooler Slim Type Copper Socket-7/370 CPU Cooler
page 5-5 page 5-5

1-33 w w w. i e i w o r l d . c o m
 Half Size CPU Card Selection Guide
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
PCISA-C800EVN/
PCISA-3716EV/ ETX
Model Name JUKI-6770 PSB-4710MEV PCISA-C400EVR EVR-1G, PCISA- ROCKY-512
E2V-R4 PC/104
EDEN-400EVN/EVR
Add-on Card
IVC Card
CPU Scoket Socket-479 Socket-478 Socket-370 On Board CPU
Backplane

VIA C3 1GHz
(PCISA-C800EVN/ LCD
Intel Pentium-M / Intel P4 / P4-M / Intel Tualatin/ P3 / ULV Intel Celeron EVR-1G) AMD Geode GX1- Product
CPU Type Series
Celeron-M Celeron Celeron 400MHz VIA EDEN 400MHz 300MHz
(PCISA-EDEN-
400EVN/EVR)
Chassis
VIA 8601A + VIA 8601A +
Chipset Intel 852GM + ICH 4 Intel 845GV + ICH 4 SiS 630ET AMD GX1 + CS5530A
VT82C686B VT86C686B

On board 64 or 128 Power

DDR200 / 266 1 x DDR200 / 266 1 x PC100 / 133 1 x DIMM socket upto 1 x DIMM socket upto
Memory MB SDRAM supply
SDRAM up to 1GB SDRAM up to 1GB SDRAM up to 512MB 512MB 512MB
1 x DIMM upto 512MB

Integrate Integrate Integrate Integrate System Peripheral

Graphic Integrate with i852GM Integrate with i845GV
SiS630ET VIA 8601A VIA 8601A Chipset

Dual chance 48-bit

LCD Interface N/A N/A N/A N/A N/A
LVDS
One 10/100 Mbps
2 x 10/100 Mbps One 10/100 Mbps Ethernet(EV) One 10/100Mbps One 10/100Mbps One 10/100 Mbps
Ethernet
Ethernet Ethernet or Dual 10/100 Mbps Ethernet Ethernet Ethernet
Ethernet (E2V)

1 x RS-232 1 x RS-232 2 x RS-232

2 x RS-232 2 x RS-232 2 x RS-232
1 x RS-232/422/485 1 x RS-232/422/485 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x LPT(SPP/EPP/
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
I/O Interface 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ ECP)
ECP) ECP) ECP)
ECP) ECP) 2 x USB 1.1
2 x USB 1.1 4 x USB 1.1 4 x USB 1.1
5 x USB 2.0 2 x USB 2.0 1 x IrDA
1 x IrDA 1 x IrDA 1 x IrDA
1 x IrDA 1 x IrDA 8 x Digital I/O channel

2 x IDE ATA-100/ 2 x IDE ATA-100/ 1 x IDE ATA-100/ 2 x IDE ATA-100/ 2 x IDE ATA-100/ 1 x IDE ATA-100/
Drive Interface 66/33 66/33 66/33 66/33 66/33 66/33
1 x FDD 1 x FDD 1 x FDD 1 x FDD 1 x FDD 1 x FDD

Audio AC’97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC N/A

SSD CF Type II CF Type II CF Type II CF Type II CF Type II CF Type II ,Doc

[email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected], [email protected]
Power [email protected] +5V@6A
[email protected] [email protected] (extra 128MB
Consumption (P4 2.4GHz ,512MB (P3 500MHz, 512MB
(Intel ULV 400MHz (VIA C3 800MHz , SDRAM module)
DDR SDRAM) SDRAM)
CPU, 512MB SDRAM) 1GB SDRAM)
Watchdog
Software Programmable 1-255 sec system reset
Timer

Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function N/A
Monitor

Operation Temperation Range 0 ~ 60ºC

Environment Relative Humidity 5 ~ 95 %, non-condensing

Recommand On Board Fan or Fan-

CF-518 CF-512,CF-515 CF-504 Fanless Fanless
Fancooler less

Remark PCI Bus Only PCISA PCISA PCISA ISA

w w w. i e i w o r l d . c o m 1-34
 Half Size CPU Card Selection Guide

JUKI-C3-1GN
JUKI-3711PTN, JUKI-C3-1GR JUKI-510-300-R1
Model Name JUKI-745E-R4 JUKI-C400 JUKI-6752
JUKI-3711PTR JUKI-EDEN- 400N JUKI-511P-300-R1
JUKI-EDEN- 400R
CPU Scoket Socket-370 Socket-7 On board CPU On Board CPU On board CPU On board CPU
VIA C3 1GHz
Intel Coppermine/
Intel Pentium ULV Intel Celeron 400 (JUKI-C3-1G) AMD Geode GX1- Intel Tillamook
CPU Type Tualatin P3/Celeron
socket 7 based MHz VIA EDEN 400MHz 300MHz Pentium 266
Socket-370 based
(JUKI-EDEN- 400)
VIA 694T + VIA 8606T + VIA 8606T +
Chipset ALi Aladdin 4+ AMD GX1 + CS5530A Intel 430TX
VT82C686B VT82C686B VT82C686B
PC100/133 SDRAM SIMM upto 128MB SO-DIMM upto PC100/133 SDRAM DIMM upto DIMM SDRAM
Memory
upto 512MB EDO RAM 512MB SDRAM upto 512MB 256MB SDRAM upto 128MB
Asiliant(C&T) 69000,
CHIPS 69000 Integrate ProSavage Integrate ProSavage Asiliant(C&T) 69000
Graphic 2M /4M(69030 Integrate CS5530A
2MB RAM in 8606T in 8606T 2MB RAM
Optional) RAM
50-pin 18-bit TTL
50-pin 36-bit TTL 44-pin for TTL
44-pin 18-bit TTL (with 20-pin 36-bit dual (with FP24-01A) 50-pin for TTL
20-pin 36-bit dual
50-pin for TTL FP24-01A) channel LVDS LVDS 44-pin for TTL
LCD Interface channel LVDS
DB-15 for CRT LVDS-01 and LVDS-02 50-pin for TTL (LVDS-01) (with FP24-01A)
50-pin for TTL
module Optional DB-15 for CRT CRT DB-15 DB-15 for CRT
DB-15 for CRT AV-Out
S-video
One 10/100 Mbps One 10/100Mbps Dual 10/100 Mbps Dual 10/100 Mbps One 10/100Mbps One 10 Mbps
Ethernet
Ethernet Ethernet Ethernet Ethernet Ethernet Ethernet
4 x RS-232 4 x RS-232 1 x RS-232
2 x RS-232 2 x RS-232
2 x RS-232 1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x RS-232/422/485
1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
I/O Interface 1 x LPT(SPP/EPP/ECP) ECP) ECP) 1 x LPT(SPP/EPP/
ECP) ECP)
1 x USB 1.1 3 x USB 2.0 3 x USB 2.0 ECP)
2 x USB 1.1 2 x USB 1.1
1 x IrDA 2 x USB 1.1 2 x USB 1.1 2 x USB 1.1
1 x IrDA 1 x IrDA
1 x IrDA 1 x IrDA 1 x IrDA
1 x IDE ATA-100/ 1 x IDE ATA-100/ 1 x IDE ATA-100/
1 x ATA-33 1 x ATA-33 1 x ATA-33
Drive Interface 66/33 66/33 66/33
1 x FDD 1 x FDD 1 x FDD
1 x FDD 1 x FDD 1 x FDD
AC’97 compliant
Audio N/A N/A AC’97 Codec AC’97 Codec N/A
Audio CODEC
SSD DiskOnChip DiskOnChip CF Type II CF Type II CF Type II CF Type II
[email protected]
[email protected]
[email protected], +5V@5A [email protected], [email protected] [email protected]
Power +5V@5A
+5V@7A(P3 1GHz , [email protected] [email protected] (VIA EDEN 400MHz +5V@2A
Consumption [email protected]
256MB SDRAM) (Pentium MMX 233MHz (256MB SDRAM) 256MB SDRAM) (64MB SDRAM)
(32MB SDRAM)
32MB EDO RAM)
Software
Software Software Software Software
Watchdog Software Programmable Programmable
Programmable 1-255 Programmable 1-255 Programmable 1-255 Programmable 1-255
Timer 1-255 sec system reset 1-255 sec system
sec system reset sec system reset sec system reset sec system reset
reset
CPU Vcore, Vcc,
CPU/System
Hardware Hardware Monitoring Hardware Monitoring Hardware monitoring
N/A fan speed and N/A
Monitor system system chip on-board
temperature detecting
function
Temperation Range
Temperation Range 0 Temperation Range 0 Temperation Range 0 Temperation Range 0 Temperation Range 0
0 ~ 60ºC
Operation ~ 60ºC ~ 60ºC ~ 60ºC ~ 60ºC ~ 60ºC
Relative Humidity
Environment Relative Humidity 5 ~ Relative Humidity 5 ~ 95 Relative Humidity 5 ~ Relative Humidity 5 ~ Relative Humidity 5 ~
5 ~ 95 %, non-
95 %, non-condensing %, non-condensing 95 %, non-condensing 95 %, non-condensing 95 %, non-condensing
condensing
Recommand
CF-504 CF-502 Fan-less Fan or Fanless Fan-less Fan-less
Fancooler
ISA (510)
Remark PCISA ISA PCISA PCISA ISA
PCISA (511P)

1-35 w w w. i e i w o r l d . c o m
 Half Size CPU Card Selection Guide
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
Model Name ROCKY-418-R3 JUKI-750E-R3 JUKI-752-R3 ROCKY-318-M4-R3 ROCKY-328-M4-R2 JUKI-730-M4-R3
3.5” WAFER
ETX
PC/104
CPU Scoket On Board CPU On board CPU On board CPU On Board CPU On Board CPU On board CPU
Add-on Card
IVC Card
Maple on board Maple on board
CPU Type Maple 486DX4-100 ALi M6117 ALi M6117 ALi M6117 Backplane
486DX4-100 486DX4-100

Chipset ACC Maple ACC Maple ACC Maple ALi M6117 ALi M6117 ALi M6117 LCD
Product
Series
SIMM DRAM upto
1 SIMM upto 16MB SIMM upto 16MB
16MB / on board
2 SIMM upto 64MB SIMM upto 32MB EDO SIMM upto 32MB DRAM DRAM
Memory 2M(JUKI-2M-R3)
EDO RAM RAM EDO RAM or on board 2M/4M or on board 2M/ 4M Chassis
4M(JUKI-4M-R3)
DRAM DRAM
DRAM

HM-86508 HM-86508 HM86508 Power

Graphic N/A N/A N/A supply
1MB RAM 1MB RAM 1MB RAM

44-pin 18-bit TTL 44-pin 18-bit TTL 44-pin 18-bit TTL

LCD Interface N/A channel channel N/A N/A channel Peripheral
DB-15 for CRT DB-15 for CRT DB-15 for CRT

Ethernet N/A One 10 Mbps Ethernet N/A N/A One 10 Mbps Ethernet N/A

1 x RS-232
1 x RS-232 3 x RS-232
1 x RS-232/422/485 2 x RS-232 2 x RS-232 2 x RS-232
1 x RS-232/422/485 1 x RS-232/422/485
2 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
I/O Interface 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ ECP) ECP)
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
ECP) ECP) 2 x PS/2 KB/MS 2 x PS/2 KB/MS
ECP) ECP)
1 x IrDA

1 x IDE PIO-4 1 x IDE PIO-4 1 x IDE PIO-4 1 x IDE PIO-4 1 x IDE PIO-4 1 x IDE PIO-4
Drive Interface
1 x FDD 1 x FDD 1 x FDD 1 x FDD 1 x FDD 1 x FDD

Audio N/A N/A N/A N/A N/A N/A

SSD DiskOnChip DiskOnChip DiskOnChip DiskOnChip DiskOnChip DiskOnChip

Power [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

Consumption (32MB EDO RAM) (32MB RAM) (32MB RAM) (4MB EDO RAM) (4MB EDO RAM) (32MB RAM)

Software Software Software Software Software Software

Watchdog
Programmable 1-220 Programmable 1-220 Programmable 1-220 Programmable 1-220 Programmable 1-220 Programmable 1-220
Timer
sec system reset sec system reset sec system reset sec system reset sec system reset sec system reset

Hardware
N/A N/A N/A N/A N/A N/A
Monitor

Temperation Range 0
Temperation Range 0 Temperation Range 0 Temperation Range 0 Temperation Range 0 Temperation Range 0
~ 60ºC
Operation ~ 60ºC ~ 60ºC ~ 60ºC ~ 60ºC ~ 60ºC
Relative Humidity
Environment Relative Humidity 5 ~ Relative Humidity 5 ~ Relative Humidity 5 ~ Relative Humidity 5 ~ Relative Humidity 5 ~
5 ~ 95 %, non-
95 %, non-condensing 95 %, non-condensing 95 %, non-condensing 95 %, non-condensing 95 %, non-condensing
condensing

Recommand
Fan-less Fan-less Fan-less Fan-less Fan-less Fan-less
Fancooler

Remark ISA ISA ISA ISA ISA ISA

w w w. i e i w o r l d . c o m 1-36
 JUKI-6770 PCISA Intel Pentium-M/Celeron-M CPU Card with
LCD/CRT VGA, Dual LAN, USB2.0 and Audio

Coming Long Term Supports

DF14-30F dual channel LVDS I/F
Soon
CF II

VGA

USB 2.0

Dual 10/100 Mbps

Ethernet

K/M

PCISA Bus

Dual lay Feature

Disp Support Intel Pentium-M / Celeron-M up to FSB 400MHz
Intel 852GM integrated graphic engine support dual display function
DDR266 SDRAM memory support upto 1GB
Specifications Dual LAN, USB2.0, Audio Integrated
Socket-479 based support Intel® Pentium-M® / Celeron-M® up
CPU
to 400MHz FSB / Onboard Celeron-M 600MHz Tech Talk
System
Chipset
Intel® 852GM + ICH-4 Intel Pentium M/ Celeron M Introduction
The Intel® Pentium® M/ Celeron® M processor utilizes a new
System
DDR266 SDRAM socket support up to 1GB microarchitecture to meet the current and future demands of high-
Memory
performance, low-power embedded computing, making it ideal for
Integrated i852GM communications, transaction terminal, interactive client, and industrial
- Support dual display, dual view automation applications. While incorporating advanced processor
Display - DB-15 VGA connector technology, it remains software-compatible with previous members of
- DF14-30F dual channel LVDS connector the Intel® microprocessor family.
- Optional DVI interface

2 x 10/100 Mbps intel 82562ET/82551ER fast Ethernet Core

Ethernet Product FSB L2
controller onboard speed Thermal VID Package
Number (MHz) Cache
(GHz)
SSD Support Compact Flash Type II Socket (rear side) .13µ Process Technology (Celeron-M)
320 1.3 400 512KB 24.5W 1.356V µFC-BGA 479
- 1 x RS-232 serial port
- 1 x RS-232/422/485 serial port with Auto-Direction function 320 1.3 400 512KB 24.5W 1.356V µFC-PGA 478
- 1 x LPT by pin-header - 600 (MHz) 400 512KB 7.0W 1.004V µFC-BGA 479
- 1 x IrDA by pin-header
I/O 90nm Process Technology (Pentium M)
- 5 x USB 2.0 (4 by pin header, 1 by connector)
- 1 x FDD 1.276V
745 1.8 400 2MB 21W µFC-PGA 478
- 2 x ATA-100 IDE Channel ~1.340V
- 1 x PS/2 connector for keyboard/mouse 1.276V
745 1.8 400 2MB 21W µFC-BGA 479
~1.340V
Audio AC ‘97 compliant Audio codec 738 1.4 400 2MB 10W 1.116V µFC-BGA 479
WDT Software programmable supports 1 ~ 255 seconds system reset .13µ Process Technology (Pentium M)
- 1.6 400 1MB 24.5W 1.484V µFC-PGA 478
Hardware Provides CPU Vcore, Vcc; CPU/System fan speed and - 1.6 400 1MB 24.5W 1.484V µFC-BGA 479
monitoring temperature detecting function
- 1.1 400 1MB 12W 1.180V µFC-BGA 479
Operating
0~60°C
Temp

Relative
Humidity
5~95%, non-condensing Ordering Information
JUKI-6770E2-R10
IEI Option PCISA Intel Pentium-M/Celeron-M CPU Card with LCD/CRT VGA,
Dual LAN, USB2.0 and Audio
CB-USB03 Dual ports USB cable with bracket and 2.0mm JUKI-6770E2-600-R10
pitch connector PCISA Intel Celeron-M 600MHz CPU Card with LCD/CRT VGA,
page 5-6
Dual LAN, USB2.0 and Audio
CF-518 For GbE, DVI,Pentium-M lintroduction LV Pentium-M 1.1GHz CPU,
High performance pentium-M CPU cooler page 5-5 please confact supplier

1-37 w w w. i e i w o r l d . c o m
 PSB-4710 PCISA ( PCI only) Socket 478 CPU
Card with VGA, LAN, USB2.0 & Audio

Celeron-D Ready Version coming soon !! Long Term Supports

Single
Board
Intel 845GV+ICH4 Computer

DDR Memory Socket PIAGP Series

PC/104 Plus (PCI only)
CF II Support IBM Micro Drive PICMG
Compact Flash Memory Card Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
VGA
ETX
PC/104

Speaker Add-on Card

IVC Card
10/100 Mpbs Backplane
Ethernet
LCD
K/M Product
Series

PCI Bus Signal only

®
Chassis

FSB 533 DDR 266 pentium �

Feature
®

Power
supply
Specifications Intel P4 CPU support up to 2.53GHz / FSB 533 MHz
Intel Extreme Graphic integrated graphic engine
Socket-478 base supports Intel® Pentium® 4-M / P4 /
CPU DDR266 SDRAM memory support upto 1GB Peripheral
Celeron™ up to 2.6GHz
System Chipset Intel® 845GV chipset (with ICH4) LAN, USB 2.0, Audio integrated

System Memory
1x PC1600/PC2100 (200/266MHz) DDR SDRAM, maximum Tech Talk
up to 1GB
– Integrated in Intel® 845GV chipset

Display
– Bus: AGP 4X
– V-RAM: Shared with system memory (DVMT technology) IEI’s Complete P4-M Solution
– Resolution: Up to 2048x1536@60MHz refresh rate (Analog) IEI’s P4-M product solution is complete. Ranging
– Connector: DB-15 for CRT monitor from half size SBC (PSB-4710MEV), full size
SSD 1x Compact Flash™ Type II socket onboard SBC (SAGP-845MEV), to 5.25” size (NOVA-
Ethernet Onboard 10/100Mbps Fast Ethernet controller (82562ET PHY) 8890M series) CPU board. In addition, iEi has
WDT Software programmable supports 1~255 seconds system reset designed the CF-515 CPU cooler to go with the
– 2x ATA/100 IDE channels support CD-ROM, ZIP and LS-120
P4-M product solution.
bootable
– 2x USB 2.0 ports by pin header
– 1x FDD channel supports 1.44/2.88MB and 3-mode Pentium® 4 Pentium® 4-M
– 1x RS-232 series port by pin header
I/O 800MHz system bus:
– 1x RS-232/422/485 selectable port
– 1x LPT parallel port by pin header supports SPP/ECP/EPP 3.20, 3, 2.80C, 2.60C, 2.40CGHz
2.60, 2.50, 2.40, 2.20,
mode Available 533MHz system bus:
2.0, 1.80, 1.70, 1.60,
– 1x IrDA (SIR) Speeds 3.06, 2.80, 2.66, 2.53, 2.40B, 2.26GHz
1.50, 1.40GHz
– 1x PS/2 connector for keyboard/mouse 400MHz system bus:
Audio AC’97 CODEC 2.60, 2.50, 2.40, 2.20, 2AGHz
Expansion slot PC/104 plus (only PCI signal) L2 Cache Normally 256KB 512KB
Hardware Provides CPU Vcore, Vcc; CPU/System fan speed and
Power
monitoring temperature detecting function. 80~95W 25~35W
consumption
Interface PCISA golden edge with PCI bus.
ATX power Note: The attached letter behind the CPU frequency stands as below:
Meets ACPI 1.1 specification #.##a................................................512KB L2 Cache
control function
[email protected]; [email protected] (Intel® P4 2.4G with 512K L2; 512MB #.##b................................................Box Package
Power #.##c................................................800Mhz FSB
DDR SDRAM); [email protected], +12V@4A (Intel® P4-M 2.4GHz
Consumption
with 256MB DDR SDRAM)
Operating Model Name Chipset Form Factor
0~60°C
Temperature SAGP-845MEV Intel 845G Full size PIAGP Bus SBC
Relative ROCKY-4786EV/G-R30 Intel 865GV Full size PICMG Bus SBC
5~95%, non-condensing
Humidity ROCKY-6160/G-R10 Intel 852GME Full size PICMG Bus SBC
Only PCI Bus signal via golden finger due to the limitation of PSB-4710MEV Intel 845GV Half size PCISA Bus SBC
Note
chipset. NOVA-8890M Intel 845GV 5.25” Embedded Board
ICPMB-7660-R10 Intel 852GME ATX Motherboard
POS-478-R30 Intel 845GV POS CPU Board
IEI Option
CF-512 Ordering Information
CPU cooling fan support P4 CPU
PSB-4710MEV
CF-515 PCISA ( PCI only) Socket 478 CPU Card with VGA, LAN,
High performance Skiving CPU cooling fan support P4-M CPU
USB2.0 & Audio
page 5-5

w w w. i e i w o r l d . c o m 1-38
 PCISA-3716 PCISA-C400
PCISA Socket 370 CPU Card with VGA, PCISA ULV Intel Celeron 400 MHz CPU
Dual LAN & Audio Card with VGA, Realtek LAN & Audio

VGA
VGA

Speaker 10/100 Mbps

Ethernet
Dual 10/100 COM
Mbps Ethernet
K/M
K/M

PCISA Bus PCISA Bus

tin
Tuala por ts
™
™
p
™

S u
™
CF II CF II
Feature Rear Side Feature Rear Side
Intel PIII / Tualatin / Celeron CPU support up to FSB 133 MHz
Embedded ULV Intel Celeron 400 MHz
SiS 630ET integrated graphic engine
VIA 8601 integrated graphic engine
PC133 SDRAM memory support upto 512MB
PC133 SDRAM memory support upto 512MB
LAN, USB, Audio integrated
LAN, USB, Audio integrated

Specifications Specifications
CPU Socket-370 66/100/133 MHz FSB Tualatin, P III / Celeron™ CPU Ultra Low Voltage Intel® Celeron 400MHz
System Chipset SiS630ET System chipset VIA VT8601T with VT82C686B
System Memory 1 x DIMM up to 512MB SDRAM
System
One 168-pin DIMM sockets up to 512MB – VIA 8601A integrated
Memory
– Bus: AGP 4X
– Integrated in SiS630ET Chipset
– Resolution: Up to 1600 x 1200 CRT display
– Bus: AGP 66MHz Display
– V-RAM: Shared with system memory up to 8MB
Display – V-RAM: Share with system memory up to 64MB RAM – Connector: DB-15 for CRT display
– Resolution: 1600 x 1200 (16-bit colors) – Support I2C bus interface
– Connector: DB-15 for CRT display 1 x Disk On Chip socket and 1 x Compact Flash™ type II socket
Dual Ethernet with one integrated in chipset and one Realtek SSD
onboard
Ethernet
8100
Ethernet 1 x onboard 10/100Mbps Realtek RTL8100 fast Ethernet controller
SSD Support Compact Flash Type II Socket (rear side)
Audio AC’97 compliant Audio CODEC with 6W Amplifer WDT Software programmable supports 1~255 seconds system reset
– 1 x RS-232 serial port by pin-header
– 2 x RS-232 serial port (16C550 UARTs compatible)
– 1 x RS-232/422/485 selectable port
– 1 x parallel port (SPP/EPP/ECP) – 1 x LPT parallel port by pin-header (Supports SPP/EPP/ECP mode)
– 2 x USB 1.1 (Pin header) – 1 x IrDA (SIR mode)
I/O
– 1 x IrDA (SIR) I/O – 4 x USB 1.1 ports by pin header
– 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function – 2 x ATA-100 IDE channel, supports CD-ROM, ZIP and LS-120 drive
– 1 x ATA-100 IDE channels bootable
– 1 x PS/2 for Keyboard / Mouse
WDT software programmable, support 1~ 255 sec. system reset
– 1 x FDD connector, support 1.44/2.88MB and 3-mode floppy drive
Power Control Audio AC’97 compliant Audio CODEC codec
Support ATX power control function
function ISA Plus™ Design to enhance the ISA bus drive capability
Power 5V@6A, 12V@170mA (Pentium III 500MHz CPU and 512MB Hardware Provides CPU Vcore / Vcc; CPU / System Fan speed and temperature
Consumption SDRAM) Monitoring detecting function
Operating ATX power
0 ~60°C (CPU cooler required) Meets ACPI 1.1 specification
Temp control function
Power
Relative 5VSB@180mA, [email protected], +12V@170mA (512MB SDRAM)
5~95%, non-condensing Consumption
Humidity
Operating
GW 700g 0 ~ 60ºC
Temperature
Remark 8 bit limited ISA (LPC-ISA) Relative
5 ~ 95 %, non-condensing
Humidity
Ordering Information GW 700g

PCISA-3716E2V-R4 Ordering Information

PCISA Socket 370 CPU Card with VGA, Dual LAN & Audio, R4 PCISA-C400R
PCISA-3716EV-R4 PCISA ULV Intel Celeron 400 MHz CPU Card with VGA, Realtek
PCISA Socket 370 CPU Card with VGA, LAN & Audio, R4 LAN & Audio
Notes: Note:
For RS-422/485, plese contact with supplier For Intel® Celeron 650MHz / Pentium® III 800MHz CPU/Intel LAN
chipset solution supports, please contact supplier

IEI Option
CB-USB02
IEI Option
Dual ports USB cable with bracket CB-USB02
page 5-6 Dual ports USB cable with bracket page 5-6

1-39 w w w. i e i w o r l d . c o m
PCISA-C800/EDEN-400 ROCKY-512
ISA GX1-300MHz CPU Card with VGA,
PCISA VIA C3 / EDEN CPU Card with
VGA, LAN & Audio LAN

All-in-One Half size SBC On Board Memory 64MB/128MB Single

Board
Computer

PIAGP Series
PICMG
VGA Half-Size
VGA Industrial
Motherboard
10/100 Mbps 5.25” NOVA
Ethernet EPIC NANO
DOC 3.5” WAFER
COM
PC104 ETX
K/M DOC PC/104
Add-on Card
IVC Card
Backplane
ISA Bus
™
1GHz
™
CPU +5V
CF II ™ LCD
Only CF II Product
Feature Series
Rear Side Rear Side
Embedded VIA C3 1GHz / EDEN 400MHz CPU
VIA 8601 integrated graphic engine Feature
PC133 SDRAM memory support upto 512MB Chassis
Embedded AMD Geode GX1 300 MHz
LAN, USB, Audio integrated GX-1 integrated graphic engine
PC133 SDRAM memory support upto 512MB
Specifications LAN, USB, CF-II + DOC sockets integrated Power
Embedded VIA C3 1GMz CPU (PCISA-C800-1G) supply
CPU
System
EDEN 400MHz CPU (PCISA-EDEN-400) Specifications
VIA 8601A + 686B, PCI 2.2 compliant CPU Embedded Geode GX1 300MHz CPU
Chipset
System System Peripheral
1x DIMM up to 512MB SDRAM AMD Geode GX1 with CS5530A
Memory chipset
– 64-bit Single Cycle 2D/3D Graphics Engine (VIA 8601A) System Onboard 64 or 128MB SDRAM and 1x PC100/133 SDRAM slot
– AGP 4X bus bandwidth up to 533 MB/sec memory up to 512MB
– Resolutions: up to 1600x1200 (UXGA) – Built-in CS5530A chip
Display – Integrated 24-bit 230MHz True Color DAC – V-RAM: Shared with system memory up to 4MB, adjustable via
– V-RAM: Share system memory up to 8MB Display BIOS setup program.
– Support I²C bus interface – Resolution: Up to 1280x1024
– Connector: DB-15 for CRT – Connector: DB-15 for CRT display
1x 10/100Mbps fast Ethernet controller onboard (Intel 82559 / Realtek 1x onboard Compact Flash type II socket and; One DiskOnChip
Ethernet SSD
RTL8100B) socket
SSD 1x Disk On Chip socket and 1x CompactFlash™ type II socket onboard
Ethernet 1x onboard Realtek RTL8100B 10/100bps fast Ethernet controller
– 1x RS-232 series port by pin header (16C550 UARTs Compatible)
– 1x RS-232 and 1 x RS-232/422/485 (selectable) serial ports by
– 1x RS-232/422/485 selectable port
pin header
– 1x LPT by pin header (support SPP/EPP/ ECP mode)
– 1x LPT parallel port by pin header
I/O – 1x IrDA by pin header (SIR mode)
(supports SPP/EPP/ECP mode)
– 4xUSB port by pin header (USB 1.1 Compliant)
– 1x IrDA (SIR mode)
– 1x FDD channel support 1.44MB, 2.88MB and 3-mode I/O
– 2x USB 1.1 port by pin header
– 2x ATA-100 IDE channel support CD-ROM; ZIP and LS-120 bootable.
Audio AC’97 compliant Audio CODEC (Line-in, Line-out, Mic-in by pin header) – 1x ATA/33 IDE channel supports CD-ROM, ZIP and LS-120
WDT software programmable support 1~255 second system reset drive bootable
ISA Plus™ Design to enhance the ISA bus drive capability (64mA) – 1x FDD connector, support 1.44/2.88MB and 3-mode floppy
Hardware drive
CPU Vcore; Vcc; CPU/System Fan speed and Thermal
Monitoring Digital I/O 4 inputs and 4 pins for outputs
ATX power Power control Meets ACPI 1.1 specification, comes with external power
control Meets ACPI 1.1 function connector of 5V input
function Power
Power +5VSB@180mA, +12V@170mA, [email protected] (VIA C3 800MHz CPU [email protected] (with an extra 128MB SDRAM module)
Consumption
Consumption with 512MB SDRAM, Windows 2000) Operating
Operating 0~60°C
0~60°C (CPU cooler required) Temperature
Temp
Relative
Relative 5~95%, non-condensing
5-95%, non-condensing Humidity
Humidity
GW 700g GW 700g
Note CPU cooling fan included !
Ordering Information
Ordering Information
PCISA-C800EVN-1G ROCKY-512
PCISA VIA C3 1GHz CPU Card with VGA, Intel LAN & Audio ISA GX1-300MHz CPU Card with VGA, LAN
PCISA-C800EVR-1G ROCKY-512-64MB
PCISA VIA C3 1GHz CPU Card with VGA, Realtek LAN & Audio ISA GX1-300MHz CPU Card with 64MB DRAM, VGA, LAN
PCISA-EDEN-400EVN ROCKY-512-128MB
PCISA VIA EDEN 400MHz CPU Card with VGA, Intel LAN & Audio ISA GX1-300MHz CPU Card with 128MB DRAM, VGA, LAN
PCISA-EDEN-400EVR
PCISA VIA EDEN 400MHz CPU Card with VGA, Realtek LAN & Audio
IEI Option
IEI Option
CB-USB02
CB-USB02 Dual ports USB cable with bracket Dual ports USB cable with bracket
page 5-6 page 5-6

w w w. i e i w o r l d . c o m 1-40
 JUKI-3711
PCISA Socket 370 PIII CPU Card with
JUKI-745
ISA Socket 7 CPU Card with LCD/ CRT
LCD/ CRT VGA (2MB), LAN & Audio VGA (2MB), LAN, FP24-01A

VGA
VGA

10/100 Mbps 10/100 Mbps

Ethernet Ethernet
COM COM

DOC

PCISA Bus ISA Bus

™ tin
Tuala por ts Feature ™

Feature ™
Sup Intel PentiumMMX / AMD K6 CPU support up to FSB 66 MHz
C&T 69000 graphic chip with 2MB memory and TTL interface
Intel PIII / Tualatin / Celeron CPU support up to FSB 133 MHz
EDORAM memory support upto 128MB
C&T 69000 graphic chip with 2MB memory and TTL interface
LAN, USB Integrated
PC133 SDRAM memory support upto 512MB
LAN, USB, Audio integrated
Specifications
Specifications CPU Socket-7 base support Intel® Pentium® MMX up to 66MHz FSB
System
CPU Socket-370 66/100/133 MHz FSB Tualatin, P III / Celeron ALi Aladdin 4+
Chipset
System
VIA 694T+686B chipsets System
Chipset Two 72-pin SIMM sockets up to 128MB EDO RAM
System Memory
1 x DIMM (168-pin) for SDR Memory module up to 512MB – Asiliant (C&T) 69000 LCD/CRT VGA
Memory
Asiliant (C&T) 69000(2M V-RAM) controller, DB-15 for CRT, 50pin – Bus : PCI
Display pin-header for LCD, with FP24-01A for 18/24-bit LCD Resolution: – V-RAM : 2MB RAM
max. 1280 x 1024, 256 colors – Resolution : 1280 x 1024 (256 colors) for CRT display
1x10/100Mbps Ethernet controller with RJ-45 (Intel 82559 or Display – Connectors : DB-15 for CRT display
Ethernet – 50-pin pin-header for 36-bit LCD panel
Realtek 8100B Chip)
SSD 1 x DOC socket support up to 288MB – 44 pins pin-header for 24-bit LCD panel (With FP24-01A board)
– IDE: 1x ATA-100 IDE channel support HDD, CDROM, LS-120, – Supports 3.3V and 5V LCD panel
and ZIP. – Optional LVDS-01 & LVDS-02 module for LVDS interface
– FDD: 1 x port, support 1.44MB, 2.88MB, 3-mode function Realtek RTL8100B 10/100Mbps Ethernet chip with RJ-45
Ethernet
I/O – COM: 2 x RS-232 serial ports connector
– LPT: 1 x parallel port (SPP/EPP/ECP) SSD One DiskOnChip socket
– USB: 2x USB 1.1 ports (Pin header) – 2 x RS-232 serial port (16C550 UARTs compatible)
– KB/MS: 1x PS/2 – 1 x parallel port (SPP/EPP/ECP)
Hardware – 1 x USB 1.1 (Pin header)
Support I/O
monitor – 1 x IrDA (SIR)
Power – 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function
ATX power control function
control – 1 x ATA-33 IDE channel (44-pin header)
WDT software programmable, support 1~ 255 sec. system reset WDT software programmable, support 1~ 255 sec. system reset
Power
A non-volatile 1Kbit EEPROM is provided to retain application
connector Molex 8981-4M equivalent (5V, 12V input) E²Key
critical read/write data
function
Power ISA Plus Designed to enhance the ISA bus drive capability
[email protected], 5V@7A (P3-1G with 256MB) Power +5V@5A, +12V@170mA, -12V@20mA (Intel Pentium MMX
Consumption
Operating Consumption 233MHz CPU and 32MB EDO RAM)
0-60°C (CPU cooler required)
Temperature Operating
0 ~60°C (CPU cooler required)
Relative Temperature
5-95%, non-condensing
Humidity Relative
5~95%, non-condensing
Dimensions 185 x 122mm (7.3” x 4.8”) Humidity
GW 700g GW 700g

Ordering Information Ordering Information

JUKI-3711PTN
PCISA Socket 370 PIII CPU Card with LCD/ CRT VGA (2MB), Intel JUKI-745E-R3
LAN & Audio ISA Socket 7 CPU Card with LCD/ CRT VGA (2MB), LAN, FP24-
JUKI-3711PTR 01A, R3
PCISA Socket 370 PIII CPU Card with LCD/ CRT VGA (2MB),
Realtek LAN & Audio

IEI Option IEI Option

CB-USB02 LVDS-01-R7 One channel LVDS module
Dual ports USB cable with bracket LVDS-02 Two channels LVDS module
page 5-6

1-41 w w w. i e i w o r l d . c o m
 JUKI-C400 JUKI-EDEN-400/C3-1G
PCISA VIA C3 / EDEN CPU Card with LCD/
PCISA ULV Intel Celeron 400MHz CPU Card with
LCD/ CRT VGA, Dual LAN, USB 2.0 & Audio CRT VGA, Dual LAN, USB 2.0 & Audio
Supports TTL Display
Single
Supports LVDS Display
Board
Computer

20-pin, 36-bit 4 COM ports PIAGP Series

LVDS PICMG
50-pin TTL Half-Size
Industrial
VGA VGA Motherboard
5.25” NOVA
USB 2.0 EPIC NANO
USB 2.0
3.5” WAFER
ETX
Dual 10/100
Mbps Ethernet Dual 10/100 PC/104
Mbps Ethernet Add-on Card
K/M IVC Card
K/M Backplane

™ LCD
PCISA Bus ™
Product
CF II Series
CF II
™
Feature ™

Rear Side
Feature Rear Side VIA C3 1GH z / EDEN 400MHz CPU
VIA 8606 integrated graphic engine with TTL / LVDS interface
Chassis

Embedded ULV Intel Celeron 400 MHz PC133 SDRAM memory with SO-DIMM support upto 512MB
VIA 8606 integrated graphic engine with TTL / LVDS interface LAN, USB 2.0, Multi-COM, Audio integrated Power
PC133 SDRAM memory with SO-DIMM support upto 512MB supply
LAN, USB 2.0, Multi-COM, Audio integrated Specifications
Specifications CPU
Embedded VIA C3 1GHz CPU (JUKI-C3-1G)
Embedded VIA EDEN 400MHz CPU (JUKI-EDEN-400)
Peripheral
CPU Ultra Low Voltage Intel Celeron 400MHz System chipset VIA VT8606T (PN133T) + VT82C686B
System chipset VIA VT8606T (PN133T) with VT82C686B System memory 1xSO-DIMM socket support up to 512MB
System Memory Provide 1x SODIMM up to 512MB SD RAM
– On-chip ProSavage™ VGA controller – On-chip ProSavage™ VGA controller
– Bus: AGP 4 x – Bus: AGP 4x
– V-RAM: Shared with system memory up to 32MB (SMA technology)
– V-RAM: Shared with system memory up to 32MB (SMA Technology)
Display – Resolution: 1920 x 1440 single display
Display – Resolution: 1920 x 1440 single display – Connector: DB-15 for CRT display
– Connector: DB-15 for CRT display – LCD: DF14-20F 36-bit Dual channel for LVDS and 1 x 50-pin by
– LCD: DF14-20F 36-bit Dual channel for LVDS and 1 x 50-pin by pin- pin-header for TTL
header for TTL SSD 1x onboard Compact Flash type II socket
SSD 1x onboard Compact Flash™ Type II socket Ethernet 2x onboard 10/100bps Intel 82551/RTL8100BL fast Ethernet controller
2 x onboard 10/100Mbps Intel 82551 / Realtek RTL8100BL fast – 4 x RS-232 serial ports by pin header
Ethernet – 1 x LPT parallel port by pin header (Supports SPP/EPP/ECP mode)
Ethernet controller
– 4 x RS-232 serial port by pin-header – 1 x IrDA (SIR mode)
– 1 x LPT parallel port by pin-header (Supports SPP/EPP/ECP mode) – 3 x USB 2.0 and 2 x USB 1.1 by pin header
I/O
– 2 x ATA/100 IDE channel, supports CD-ROM, ZIP and LS-120 drive
– 1 x IrDA (SIR mode)
bootable (IDE1: 40-pin, IDE2: 44-pin)
– 3 x USB 2.0 and 2 x USB 1.1 ports by pin-header – 1 x PS/2 for Keyboard/Mouse
I/O
– 2 x ATA/100 IDE channel, supports CD-ROM, ZIP and LS-120 drive – 1 x FDD connector, support 1.44/2.88MB and 3-mode floppy drive
bootable(IDE 1: 40-pin, IDE 2: 44-pin) Audio AC’97 Codec
– 1 x PS/2 for Keyboard / Mouse WDT Software programmable supports 1~255 seconds system reset
– 1 x FDD connector, support 1.44 / 2.88 and 3-mode floppy drive Expansion Slot PC/104 Expansion connector
Audio AC’97 compliant Audio CODEC Digital I/O TTL Level 4 - input and 4 - output
WDT Software programmable supports 1~255 seconds system reset Hardware VT82C 686B (Provides CPU Vcore, Vcc; CPU/System fan speed and
Expansion slot PC/104 Monitoring temperature detecting function)
Digital I/O TTL Level 4-input and 4-output ATX power
Meets ACPI 1.1 specification
Hardware VT82C 686B (Provides CPU Vcore / Vcc; CPU / System Fan speed and control function
Monitoring temperature detecting function) Power
[email protected]; (VIA EDEN 400MHz 256MB SDRAM)
ATX power Consumption
Meets ACPI 1.1 specification Operating
control function 0~60°C
Temperature
Power
[email protected], +12V@500mA (512MB SDRAM) Relative
Consumption 5~95%, non-condensing
Humidity
Operating GW 700g
0 ~ 60ºC
Temperature
Relative
Humidity
5 ~ 95 %, non-condensing Ordering Information
GW 700g JUKI-C3-1GN PCISA VIA C3 1GHz CPU Crad with LCD/ CRT VGA, Dual
Intel LAN, USB 2.0 & Audio
Ordering Information JUKI-C3-1GR PCISA VIA C3 1GHz CPU Card with LCD/ CRT VGA, Dual
Realtek LAN, USB 2.0 & Audio
JUKI-C400R PCISA ULV Intel Celeron 400MHz CPU Card with LCD/
CRT VGA, Dual Realtek LAN, USB 2.0 & Audio
JUKI-EDEN-400N PCISA VIA EDEN 400MHz CPU Card with LCD/ CRT
VGA, Dual Intel LAN, USB 2.0 & Audio
JUKI-C400N PCISA ULV Intel Celeron 400MHz CPU Card with LCD/
CRT VGA, Dual Intel LAN, USB 2.0 & Audio
JUKI-EDEN-400R PCISA VIA EDEN 400MHz CPU Card with LCD/ CRT
VGA, Dual Realtek LAN, USB 2.0 & Audio
Note:
Note:
For Intel Celeron 650 MHz / LV Pentium III 800 MHz / RS-232/422/485
For optional RS-232/422/485 serial port, please contact supplier
support, please contact supplier.

IEI Option IEI Option

CB-USB02 Dual ports USB cable with bracket CB-USB02 Dual ports USB cable with bracket
page 5-6 page 5-6

w w w. i e i w o r l d . c o m 1-42
 JUKI-510/511P JUKI-6752
ISA Low Power Pentium-266 CPUCard with
ISA/PCISA GX1-300 CPU Card with LCD/
CRT VGA, TV Output, LAN & Audio LCD/ CRT VGA (2MB), LAN

Intel® Tillamook
CPU

CHIPS 69000
VGA LCD/CRT VGA
VGA
10/100 10/100
Mbps Mbps
Ethernet Ethernet

COM COM

K/M
K/M

ss
Fanle
™

Feature CF II

AMD Geode GX1 300 MHz

Feature
GX-1 integrated graphic engine with TTL interface Rear Side
Intel PentiumMMX 266 MHz CPU
PC100 SDRAM memory support upto 256MB C&T 69000 graphic chip with 2MB memory and TTL interface
LAN, USB, Audio integrated PC133 SDRAM memory with SO-DIMM support upto 128MB
LAN, USB integrated
Specifications
CPU AMD Geode GX1-300MHz
Specifications
System Memory up to 256MB DIMM Intel® low power consumption Tillamook Pentium®MMX -266
CPU
JUKI-511P PCISA bus to support 4 PCI slots MHz CPU on board
Bus
JUKI-510 ISA bus External Cache 512KB
– built-in CS5530A chipset to support TFT LCD & CRT System
Intel® 430TX
display Chipset
– V-RAM : share with system memory(up to 4MB), setting System
One 144-pin SO-DIMM sockets up to 128MB SDRAM
in BIOS Memory
Display – Resolution : 1280 x 1024, 256 colors – Asiliant (C&T) 69000 LCD/CRT VGA
– Connector :DB-15 for CRT display 50-pin pin header for – Bus : PCI
18-bit TFT LCD, Standard equipped with FP24-01A for – V-RAM : 2MB RAM
44-pin LCD connection TV output: support NTSC and PAL Display
– Resolution : 1280 x 1024 (256 colors) for CRT display
signal – Connectors : DB-15 for CRT display 50-pin pin-header for 36-
Realtek RTL8100B 10/100 Mbps Ethernet Controller bit LCD panel
Ethernet
Support WOL function Ethernet Intel 82559ER 10/100Mbps Ethernet chip with RJ-45 connector
SSD One CF Type II Socket (rear side)
SSD One CF Type II socket (support IBM MicroDrive) (rear side)
– 1 x RS-232 port
Audio AC’97 compliant Audio codec – 1 x RS-232/422/485 selectable port with Auto-Direction function
– 2 x RS-232 serial port (16C550 UARTs compatible) – 1 x parallel port (support SPP/EPP/ECP mode)
– 1 x parallel port (SPP/EPP/ECP) I/O – 2 x USB 1.1 (pin header)
– 2 x USB 1.1 (Pin header) – 1 x IrDA port
I/O – 1 x FDD port
– 1 x IrDA (SIR)
– 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function – 1 x ATA-33 IDE channel (44-pin header)
– 1 x ATA-33 IDE channels Expansion Slot PC/104
WDT software programmable, support 1~ 255 sec. system reset WDT software programmable, support 1~ 255 sec. system reset
Hardware
Power Control Support ATX function Winbond hardware monitoring chip on board
Monitor
Power Consumption 5V@2A, 12V@100mA (with 64MB SDRAM)
ISA Plus Designed to enhance the ISA bus drive capability
Operating Temp. 0-60°C Power
Relative Humidity 5~95%, non-condensing +5V@2A, +12V@170mA, -12V@20mA (32MB SDRAM)
Consumption
GW 700g Operating
0-60°C (CPU heat sink included)
Remark External Power Connector of 5V input. Temperature
Relative
5~95%, non-condensing
Ordering Information Humidity
GW 700g
JUKI-510-300-R1
ISA GX1-300 CPU Card with LCD/ CRT VGA, TV Output, LAN Ordering Information
& Audio, R1
JUKI-511P-300-R1 JUKI-6752
PCISA GX1-300 CPU Card with LCD/ CRT VGA, TV Output, ISA Low Power Pentium-266 CPU Card with LCD/ CRT VGA
LAN & Audio, R1 (2MB), LAN

IEI Option
IEI Option
LVDS-01-R7 One Channel LVDS module,18-bit Work with
NEC 15” NL1027BC30-04F LCD Panel,...etc. CB-USB02
CB-USB02 Dual ports USB cable with bracket Dual ports USB cable with bracket
page 5-6 page 5-6

1-43 w w w. i e i w o r l d . c o m
5x86/486 Class CPU Card Half Size ISA Bus
5x86/486 Class CPU Card
Single
Board
ROCKY-418-R3 JUKI-750E-R3 JUKI-752-R3 Computer
Maple Maple Maple
CPU PIAGP Series
on board on board on board
CPU FSB 486DX4-100 486DX4-100 486DX4-100 PICMG

Ext.Cache No No No Half-Size
Industrial
1 SIMM/32MB 1 SIMM/32MB 1 SIMM/32MB Motherboard
RAM Socket
or 2 SIMM/16+16MB or 2 SIMM/16+16MB or 2 SIMM/16+16MB 5.25” NOVA
ROCKY-418-R3 RAM Type 5V EDO/FP RAM 5V EDO/FP RAM 5V EDO/FP RAM EPIC NANO
Chipset ACC Maple ACC Maple ACC Maple 3.5” WAFER
Bus ISA ISA ISA ETX
VGA No HM-86508 (1MB) HM-86508 (1MB) PC/104
Supports LCD No Yes Yes Add-on Card
Ethernet No 10Mbps (*L1) No IVC Card
RS-232 1 1 2 Backplane

RS-232/422/
1 1 0
JUKI-750E-R3 485
LCD
Parallel 1 1 1 Product
IrDA Port No No No Series
IDE Port 1 (PIO-4) 1 (PIO-4) 1 (PIO-4)
FDD Port 1 1 1
SSD Socket DOC/1 DOC/1 DOC/1 Chassis
WatchDog
Yes Yes Yes
Timer
PC/104 Yes Yes Yes
Power
JUKI-752-R3 E2Key Yes No No supply

Note: *L1 Realtek RTL8019 10Mbps Ethernet Ordering Information

on board with RJ-45 connector Peripheral

ROCKY-418-R3 ISA 486DX4-100 CPU Card with COM, DOC, R3

*R1 Option : DRAM on board & RAM
JUKI-750E-R3 ISA 486DX4-100 CPU Card with LCD/ CRT VGA, LAN, R3
socket will be disable (2 RAM
JUKI-752-R3 ISA 486DX4-100 CPU Card with LCD/ CRT VGA, R3
modules are required)

386SX-40 Class CPU Card Half Size ISA Bus

386SX- 40 CPU Card
ROCKY-318-M4-R3 ROCKY-328E-M4-R2 JUKI-730-M4-R3
CPU M6117 on board M6117 on board M6117 on board
CPU FSB 386SX-40 386SX-40 386SX-40
1 SIMM/16MB 1 SIMM/16MB 1 SIMM/16MB
RAM Socket
(4MB, *R1) (4MB, *R1) (4MB, *R1)
RAM Type EDO/FP RAM EDO/FP RAM EDO/FP RAM
Chipset ALi M6117 ALi M6117 ALi M6117
ROCKY-318-M4-R3 Bus ISA ISA ISA
VGA No No HM86508 (1MB)
Supports LCD No No Yes
Ethernet No 10Mbps (*L1) No
RS-232 2 2 3
RS-232/422/486 0 0 1
Parallel 1 1 1
ROCKY-328E-M4-R2 IDE Port 1 (PIO-4) 1 (PIO-4) 1 (PIO-4)
FDD Port 1 1 1
SSD Socket DOC/1 DOC/1 DOC/1
WatchDog Timer Yes Yes Yes
PC/104 Yes Yes Yes
E2Key Yes Yes Yes

JUKI-730-M4-R3 Ordering Information

Note: *L1 Realtek RTL8019 10Mbps Ethernet on
board with RJ-45 connector ROCKY-318-M4-R3 ISA 386SX-40 CPU Card with 4M DRAM, R3
*R1 Option: DRAM on board & RAM socket ROCKY-328E-M4-R2 ISA 386SX-40 CPU Card with 4M DRAM, LAN, R2
will be disable JUKI-730-M4-R3 ISA 386SX-40CPU Card with 4M DRAM, LCD/ CRT VGA, 4COM

w w w. i e i w o r l d . c o m 1-44
 New Industrial Motherboard ICPMB Product Line
Factory Automation
Security POS

Medical & Healthcare ATM Factory Automation

P4 CPU
ULV Celeron
ss Dual lay
Fanle Disp Long Term Supports PCI USB COM WDT
ISA AGP CF II Gigabit
Ethernet

Long Life Capability for Industrial Application

IEI Industrial Motherboard is targeted for industrial applications that require a cost-effective x86 system board yet do not want to
sacrifice in reliability, flexibility, and support. All of our industrial motherboards are tested under industrial environment. Moreover,
applications that require multiple serial communication ports and ISA bus will also be supported by our industrial motherboard.
For applications where detail specifications are critical, we not only commit to long term product support, but we also support any
revision control and version update control, and allow customer to retain their exact product specification under the revision control.
We provide technical support to all of our products including industrial motherboard such as customization of BIOS. As a system
application builder, you will greatly benefit from designing your solution with industrial motherboard.

Some of the key features of industrial motherboard that differs from consumer motherboard are functions such as compact
flash socket, watch-dog timer, digital I/O, LCD display and ISA bus slots. The benefit of using IEI industrial motherboards is its
guaranteed long life cycle, revision control, and industrial reliability.

ICPMB Series Motherboard Main Features

Standard ATX and embedded ATX form factor design
PCI slots and ISA slots expandability
Provides wide range of CPU frequency between Intel® Pentium 4 and fan-less Ultra Low Voltage Intel® CPU solution
Multiple inputs and outputs extension ability like COM ports, Digital I/O channel, USB2.0 and ISA bus
Support Giga bit Ethernet
On-board CompactFlashTM type II socket supports embedded system usage
Qualified for industrial level environment

AGP add-on card

Model Name CPU Form Factor PCI slot ISA slot PCI/ISA slot COM USB
support
ICPMB-8650 Intel P4 Socket- 478 upto 800 FSB ATX 4 1 1 YES 6 8 (USB2.0)
ICPMB-8660 Intel P4 Socket- 478 upto 800 FSB Embedded ATX 1 0 0 N/A 4 8 (USB2.0)
ICPMB-7660 Intel P4 socket- 478 upto 533 FSB ATX 4 2 1 YES 6 8 (USB2.0)
ICPMB-7760 Intel P4 socket- 478 upto 533 FSB Embedded ATX 1 IPMI socket 4 6 (USB2.0)
ICPMB-2660 ULV Intel Celeron 400 ATX 4 2 1 N/A 6 6 (USB2.0)
ICPMB-2661 P3 Socket-370, upto 133 FSB ATX 4 2 1 N/A 6 6 (USB2.0)
POS- 478 Intel P4 socket- 478 upto 533 FSB LPX 1 0 0 N/A 4 6 (USB2.0)
POS-380 P3 Socket-370, upto 133 FSB LPX 1 0 0 N/A 6 6 (USB2.0)
POS-370 P3 Socket-370, upto 133 FSB LPX 1 0 0 N/A 4 5 (USB1.1)
POS-EDEN- 400 VIA EDEN 400 MHz LPX 0 1 x PCISA 4 4 (USB1.1)

1-45 w w w. i e i w o r l d . c o m
 ICPMB-7880 Micro-ATX MB, LGA775 800MHz FSB with VGA,
GbE, SATA, 4 COM & Audio

Coming Single

Soon
Board
Computer
CF II PIAGP Series
PICMG
DDR 400
Half-Size
SATA
Feature Industrial
Motherboard
Intel LGA 775 P4/Celeron CPU with HT up to 800MHz FSB 5.25” NOVA
Supports PCI Express x16 and CRT VGA solution EPIC NANO
Dual Channel DDR 333/400 support up to 2GB 3.5” WAFER
LGA775 PCI Express GbE, USB2.0, 4 x COM, 4 x SATA, CF II ETX
PCI Express Support 2x PCI Express x1 and 1x PCI extension slot PC/104
x16 Add-on Card
IVC Card
PCI Tech Talk Backplane

PCI-Express Introduction
LCD
LPT
PCI Express is a high-performance interconnection that gives more Product
for less, meaning more bandwidth with fewer pins. PCI Express Series
is designed to leverage the strengths of yesterday’s and current
PCI Express x1 general I/O architectures while addressing immediate and future
I/O architectural and mechanical issues with current technologies. Chassis
A few examples of these issues are bandwidth constraints, protocol
limitations and high pin count. More technically speaking, PCI Express
is a high speed, low voltage, and differential serial pathway for two Power
Audio devices to communicate with each other. PCI Express uses a protocol supply
USB2.0
that allows devices to communicate simultaneously by implementing
K/M COM VGA
LAN+USB2.0 dual unidirectional paths between two devices.

Specifications Peripheral

LGA 775 for Intel Pentium 4/ Celeron D with 533/800

CPU
MHz FSB
System Chipset Intel 915G + ICH6 Device A Device B
System Memory Dual channel DDR333/400 socket support up to 2GB
SSD 1x Compact Flash™ Type II Socket
Dual Uni-directional Path Concept
Display controller
Intel GMA 900 Graphic
One VGA port for CRT monitor up to 2048x1536@ 85 Hz The PCI Express Base Specification defines the following
Display
Support for Direct9X and OpenGL 1.4 configuration of serial links: x1, x2, x4, x8, x12, x16, and x32 (read
PCI Express* Graphics Interface as by one, by two, etc.).
One x16 PCI Express port
Mavell 88E8053 for PCI Express 10/100/1000 Mbps
Ethernet
Ethernet
- 3x RS232 (2 by pin header)
- 1x RS232/422/485 selectable, with Auto-direction
function
- 8x USB 2.0 (4 by pin header)
- 1x ATA-100 IDE Channel
I/O - 4x SATA-150
- 1x FDD connector, supports 1.44/2.88MB and 3-mode
floppy drive
- 1x LPT by connector (Supports SPP/EPP/ECP mode)
- 2 x PS/2 for Keyboard/Mouse
- 1 x IrDA by pin header (SIR mode)
Audio AC’97 codec
Digital I/O 4 inputs / 4 outputs
Software programmable support 1 ~ 255 sec system
WDT
reset
1 x PCI Express x16 slot, 2 x PCI Express x1 slot, 1x Bandwidth Comparison
Expansion slot
PCI slot
Model Full Duplex BW Bandwidth
Hardware Monitoring CPU voltage / Temperature / FAN speed monitor
PCI Express x1 500MB/s 250MB/s
Power control function Meets ACPI 1.1 specification
PCI Express x2 1GB/s 500MB/s
Operation Temperature 0 ~ 60 °C PCI Express x4 2GB/s 1GB/s
Relative Humidity 5 ~95%, non-condensing PCI Express x8 4GB/s 2GB/s
PCI Express x16 8GB/s 4GB/s
Ordering Information PCI Express x32 16GB/s 8GB/s
AGP 8X N/A 2.1GB/s
ICPMB-7880G PCI N/A 133.3MB/s
Micro-ATX MB LGA775 Pentium 4 / Celeron D with 533/800 MHz ISA N/A 8.33MB/s
FSB with VGA, GbE, SATA, Audio

w w w. i e i w o r l d . c o m 1-46
 ICPMB-8650 ATX Mother Board, Socket 478 800MHz FSB with
VGA, GbE, S-ATA, USB 2.0, 6 COM & Audio

Long Term Supports

CF II

LPT Gigabit LAN

COM VGA AGP Slot

USB 2.0
PCI Slots ISA Slots

AGP8X Prescott 6 COM

Ready
Specifications Feature
Intel P4 / Prescott CPU with HT support up to FSB 800MHz
CPU Socket-478 for Intel® Pentium® 4 with 533/800 MHz FSB CRT, AGP8X integrated in i865G.
System chipset Intel® 865G + ICH5 4x Dual channel DDR333/400 support up to 4GB
Support both PCI and ISA extension slots
System memory Dual channel DDR 333/400 SDRAM socket support up to 4GB CFII,GbE, USB2.0, Multi-COM, Audio, SATA integrated
Display Integrated in Intel® 865G

SSD 1x onboard Compact Flash™ Type II socket

Tech Talk
IEI Supports Prescott CPU Product List
On-board 10/100/1000Mbps Intel 82540 / Realtek RTL8110S
Ethernet
Gigabit Ethernet controller Model Name BIOS Version Support Front side Bus
Audio AC’97 compliant Audio CODEC ICPMB-8650 series V1.0 Up to FSB 800 Mhz
ICPMB-8660 series V1.0 Up to FSB 800 Mhz
– 5 x RS-232 ICPMB-7660 series V1.0 Up to FSB 533 Mhz
– 1 x RS-232 / 422 / 485 selectable ICPMB-7760 series V1.0 Up to FSB 533 Mhz
– 8 x USB 2.0 (4 by pin header)
POS-478-R30 series V3.0 Up to FSB 533 Mhz
– 2 x ATA-100 IDE channel
– 2 x Serial ATA-150 channel NOVA-8890-R30 series V3.0 Up to FSB 533 Mhz
I/O
– 1 x FDD connector, supports 1.44/2.88MB and 3-mode V2.0/
Rocky-4786-R20 series Up to FSB 800 Mhz
floppy drive V3.0(ICH5R)
– 1 x LPT parallel port (Supports SPP/EPP/ ECP mode) Rocky-6160-R10 V1.0 Up to FSB 533 Mhz
– 2 x PS/2 for Keyboard/Mouse
PSB-4710EV-R30 V2.0 Up to FSB 533 Mhz
– 1 x IrDA by pin header (SIR mode)
Rocky-4783EV-R20 V2.0 Up to FSB 533 Mhz
SAGP-865EVG-R20 V2.0 Up to FSB 800 Mhz
Digital I/O TTL Level, 4 inputs and 4 outputs
Intel IPD (EID) long support CPU list (Socket 478 type)
WDT Software programmable supports 1 ~ 255 sec, system reset Pentium 4 for FSB 800Mhz: 3.0G*
Pentium 4 for FSB 533Mhz: 2.4G, 2.8G
Expansion slot 1 x AGP 8X/4X slot, 4 x PCI slot, 1 x ISA slot, 1x PCI/ISA slot Pentium 4 for FSB 400Mhz: 2.0G, 2.6G
Celeron D for FSB 533Mhz: 2.8G*
Hardware Provides CPU Vcore, Vcc, CPU / System fan speed and Celeron for FSB 400Mhz: 2.0G, 2.5G
Monitor temperature detecting function
*Prescott core CPU
Power [email protected], [email protected], [email protected], [email protected],
Consumption [email protected] (Based on P4 3.0GHz, 1GB DDR400 SDRAM)

Operating
Temperature
0~60°C Ordering Information
ICPMB-8650GN
ATX Mother Board, Socket 478 800MHz FSB with VGA, Intel
IEI Option GbE, S-ATA, USB 2.0, 6 COM & Audio
ICPMB-8650GR
CF-514 ATX Mother Board, Socket 478 800MHz FSB with VGA, Realtek
High performance Skiving Pentium® 4 CPU cooler GbE, S-ATA, USB 2.0, 6 COM & Audio
page 5-5

1-47 w w w. i e i w o r l d . c o m
 ICPMB-8660 Embedded ATX Mother Board, Socket 478 800MHz FSB
with VGA, GbE, S-ATA, USB 2.0, 4 COM & Audio

Single
Board
Long Term Supports Computer

PIAGP Series
PICMG
Half-Size
Industrial
LPT GbE Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane
COM VGA
COM
USB 2.0
LCD
Product
Prescott Series

Ready
Chassis

Feature Tech Talk

Power
Intel P4 / Prescott CPU with HT support up to FSB 800 MHz supply
CRT/LCD integrated in 865GV IEI Support Hyper Threading Technology Product List
2 x DDR 333/400 support up to 2GB
Model Name Chipset BIOS version
Support 1 x PCI extension slot
ICPMB-8650 series Intel 865G V1.0 Peripheral
CFII,GbE, USB2.0, Multi-COM, Audio, SATA integrated
ICPMB-8660 series Intel 865GV V1.0
ICPMB-7660 series Intel 852GME V1.0
Specifications ICPMB-7760 series Intel 852GME V1.0
CPU Socket-478 for Intel® Pentium® 4 with 533/800 MHz FSB
System
Rocky-4786 series Intel 865GV V1.2
Intel® 865GV + ICH5
chipset Rocky-4784 series Intel 845E (A1) V1.3
System
Dual channel DDR 333/400 SDRAM socket support up to 2GB Rocky-4783 series SiS 651 (B) V1.2
Memory
Integrated in Intel® 865GV with DB15 connector and 2x5 box SAGP 865 series Intel 865G V1.2
Display header
– Bus: AGP 4X / 8X SAGP 845 series Intel 845GE (B1) V2.0
SSD 1x onboard Compact Flash™ Type II socket POS-478 series Intel 845GV (B1) V1.0
On-board 10/100/1000Mbps Intel 82540 / Realtek RTL8110S
Ethernet
Gigabit Ethernet controller NOVA-8890 series Intel 845GV (B1) V2.4
– 3 x RS-232
– 1 x RS-232 / 422 / 485 selectable
– 8 x USB 2.0 (4 by pin header)
– 2 x ATA-100 IDE channel
I/O
– 2 x Serial ATA-150 channel Dimensions
– 1 x FDD connector, supports 1.44/2.88MB and 3-mode floppy
drive
– 1 x LPT parallel port (Supports SPP/EPP/ECP mode)
– 2 x PS/2 for Keyboard / Mouse
– 1 x IrDA by pin header (SIR mode)
Audio AC’97 compliant Audio CODEC
Digital I/O TTL Level, 4 inputs and 4 outputs
WDT Software programmable supports 1~255 seconds system reset
Expansion
1 x PCI slot
slot
Hardware Provides CPU Vcore, Vcc, CPU / System fan speed and
Monitor temperature detecting function
Power Control
Meets ACPI 1.1 specification
Function
Power [email protected], [email protected], [email protected], [email protected],
Consumption [email protected] (Based on P4 3.0GHz, 1GB DDR400 SDRAM)
Operating
0 ~ 60ºC
Temperature
Relative
Humidity
5 ~ 95 %, non-condensing Ordering Information
ICPMB-8660GN
Embedded ATX Mother Board, Socket 478 800MHz FSB with
IEI Option VGA, Intel GbE, S-ATA, USB 2.0, 4 COM & Audio
ICPMB-8660GR
CF-514 Embedded ATX Mother Board, Socket 478 800MHz FSB with
High performance Skiving Pentium® 4 CPU cooler VGA, Realtek GbE, S-ATA, USB 2.0, 4 COM & Audio
page 5-5

w w w. i e i w o r l d . c o m 1-48
 ICPMB-7660 ATX MB, Socket 478 533MHz FSB with LCD/CRT
VGA, GbE, 6 COM & Audio

Long Term Supports

CF II
LPT Gigabit Ethernet

K/M COM VGA AGP Slot

USB 2.0 PCI Slots ISA Slots

Audio

AGP4X
8X
48-bit dual channel LVDS

Feature
6 COM Dual lay Prescott
Disp
Ready
Intel P4 / P4-M / Prescott CPU with HT support up to FSB 533 MHz
CRT/LCD integrated in i852GME, support LVDS interface for Dual display
2x DDR 266/333 support up to 2GB
Support both PCI and ISA extension slots
Long term support industal motherboard
Tech Talk
Support Intel Gigabit Ethernet function
CFII,GbE, USB2.0, 6 COM port, Audio, SATA integrated
What is Preboot eXecution Environment(PXE)?
PXE is an open industry standard develop by a number of software and
hardware vendors. PXE works with a network interface card or on board
Specifications Ethernet device in the PC, and makes as Ethernet boot device. A PXE is
Socket 478 for Intel Pentium 4/ Pentium 4-M/ Celeron with 400/ available either as a boot ROM chip that an administrator ca add to the
CPU adapter, or as part of the system BIOS if the network interface is on the
533MHz FSB
System motherboard.
Intel 852GME + ICH5
Chipset
System 2x DDR266/333 SDRAM DIMM support up to 2GB
Memory ECC support
CPU Cards with PXE Function
SSD 1x Compact Flash™ Type II Socket Model Name BIOS version Model Name BIOS version
- Display controller SAGP-4620EV V1.0 ICPMB-7660 V1.0
- Intel GMCH Integrated Graphics controller SAGP-815EV V1.0 ICPMB-7760 V1.0
- Integrated AGP 4X 2D/3D engine
ROCKY-6160 V1.1 ICPMB-2660 V1.0
- One VGA port for CRT monitor 1600x1200@8pp;
Display ROCKY-4784EVG V1.3 POS-478 V1.0
1280X1024@16bpp
- DF14-30F connertor for 48-bit LVDS I/F ROCKY-4783EV V1.1 POS-370 V2.2
- Dual independent displays ROCKY-4782EV V1.3 POS-380 V1.0
- Shared system memory up to 32MB (DVMT) ROCKY-3732EV V1.2 NOVA-7170 V1.0
Ethernet Intel 82540 for 10/100/1000Mbps Ethernet ROCKY-3742EVFG V1.1 NOVA-8890 V1.0
- 5x RS232 (4 by pin header)
ROCKY-3786EVG V1.2 NOVA-7896 V2.1
- 1x RS232/422/485 selectable
ROCKY-3785EVG V1.4 NOVA-7895FW V1.3
- 8x USB 2.0 (4 by pin header)
- 2x ATA-100 IDE Channel ROCKY-3708E2V V1.3 NOVA-7894 V1.0
- 2x SATA-150 ROCKY-3705EV V2.1 NOVA-7830 V1.0
I/O
- 1x FDD connector, supports 1.44/2.88MB and 3-mode floppy ROCKY-772EV V1.1 NOVA-7820 V1.0
drive ROCKY-C800EV V1.0 NOVA-C400 V1.0
- 1x LPT by connector (Supports SPP/EPP/ECP mode) ROCKY-C400 V1.0 NOVA-4898 V1.4
- 2 x PS/2 for Keyboard/Mouse
PSB-4710EV V1.0 ISS-102R V1.1B
- 1 x IrDA by pin header (SIR mode)
Audio AC’97 codec PCISA-3716E2V V3.1 NANO-7240 V1.0
Digital I/O 8 inputs / 8 outputs PCISA-C400 V1.0 NANO-7279 V1.0
WDT Software programmable support 1 ~ 255 sec system reset PCISA-C800EV V1.0 WAFER-C400EV V1.0
Expansion slot 1 x AGP 4X slot, 4 x PCI slot, 1 x ISA slot, 1x PCI/ISA slot ROCKY-512 V1.0 WAFER-E667EV V1.4
Hardware JUKI-3711P V1.3 WAFER-E669E2V V1.0
CPU voltage / Temperature / FAN speed monitor
Monitoring
JUKI-C400 V1.0 WAFER-5820 V2.2
Power control
Meets ACPI 1.1 specification ETX-GX-300 V1.0 WAFER-5821 V1.3
function
Power [email protected], [email protected], [email protected], [email protected], [email protected]
consumption (Based on P4 3.06GHz, 1GB DDR333 SDRAM)
Operation
0 ~ 60 °C
Temperature
Relative
Humidity
5 ~95%, non-condensing Ordering Information
IEI Option ICPMB-7660GN-R10
ATX MB socket 478 Pentium 4/ Pentium 4-M/ Celeron with
CF-514 400/533MHz FSB with LCD/CRT VGA, GbE, Audio
High performance Skiving Pentium® 4 CPU cooler
page 5-5

1-49 w w w. i e i w o r l d . c o m
 ICPMB-7760 Embedded ATX MB, Socket 478 533MHz FSB
with LCD/CRT VGA, GbE, Audio
The Best POS Platform Solutiom!!
Long Term Supports Coming Single
Board
Soon
DDR 333 up to 2GB, ECC support
Computer

PIAGP Series

I PM I ICPMB-7760 with IPMI firmware and PICMG

Half-Size
hardware solutions provide system health
WIM Socket™ Industrial
monitoring for fan speed(1xCPU fan, Motherboard
for IPMI module
2xSystem fans), voltage and temperature, 5.25” NOVA
recovery capabilities, D I/O logging and EPIC NANO
alerting, identification of failed hardware 3.5” WAFER
and it can help IT managers efficiently ETX
manage ATM, POS, Automation for PC/104
remote control.
WIM-HT68-01 Add-on Card
48-bit dual IVC Card
channel LVDS Backplane

PCI slot LCD

Product
Series

K/M COM Audio VGA DVI GbE Powered USB USB

Chassis
Feature
Intel P4 Prescott 533Mhz and Pentium 4-M CPU support Powered Dual
CRT/LCD integrated in i852GME, support LVDS/DVI interface for FSB 533 USB Display Prescott Power
Dual display
2x DDR 266/333 support up to 2GB
DDR 333
Ready supply

Support 1xPCI and IPMI Socket

GbE, USB2.0, Multi-COM, Audio
Peripheral
Specifications Tech Talk
What is Powered USB?
Socket 478 for Intel Pentium 4/ Pentium 4-M/ Celeron with 400/
CPU
533MHz FSB
System Chipset Intel 852GME + ICH4 One of the limitations of USB is the amount of +5V current available
2x DDR266/333 SDRAM DIMM support up to 2GB
System Memory to supply attached peripherals. Normally, 500mA is available at
ECC support
Display controller each host port and each powered external hub port. This amount
Intel GMCH Integrated Graphics controller of current is sufficient for most PC type peripherals like mice and
Integrated AGP 4X 2D/3D engine keyboards. When the power requirements exceed the 500mA
One VGA port for CRT monitor 1600x1200@8bpp;
Display 1280X1024@16bpp limitation, external peripherals require the use of an external power
DF14-30F connertor for 48-bit LVDS I/F supply (brick) to supply the necessary power requirements. This
DVI-I port with Silicon Image Sil164 (Optional) limitation takes away from the true “plug-n-play” idea conceived for
Dual independent displays Shared system memory up to 32MB
(DVMT) USB peripherals.
Ethernet Intel 82541ER for 10/100/1000Mbps Ethernet PoweredUSB provides a single cable connection that supplies both
2 x ATA-100 IDE port the standard USB communication signals and two additional wire
1 x FDD port supports 1.44/2.88MB and 3-mode floppy drive pairs for extra power.
1 x LPT (Supports SPP/EPP/ECP mode)
2 x PS2 Keyboard/Mouse support
I/O 3 x RS-232 Serial port
1 x RS-232/422/485 selectable Powered USB in Industry
6 x USB 2.0 port (4 by connector, 2 x power USB with 12VDC Powered USB is a natural fit for the retail POS (point-of-sale)
shared 2.5A)
peripheral market but we also believe that other industries could
1 x IrDA by pin header (SIR mode)
Audio AC’97 codec benefit from this connectivity technology. These industrial controllers
Digital I/O 4 inputs / 4 outputs almost always have a separate power supply. In the gaming
WDT Software programmable support 1 ~ 255 sec system reset industry, new, high end, joysticks with force feedback mechanisms.
1x PCI slot In the home, devices like CDROM.
Expansion slot 1x Em-ATX riser card connector
1x WIM IPMI Socket
Hardware
Monitoring
CPU voltage / Temperature / FAN speed monitor Dimensions
Power control
Meets ACPI 1.1 specification
function
Operation
0 ~ 60 °C
Temperature
Relative Humidity 5 ~95%, non-condensing

Ordering Information
ICPMB-7760GN-R10
Embedded ATX MB socket 478 Pentium 4/ Pentium 4-M/ Celeron with 400/
533MHz FSB with LCD/CRT VGA, GbE, IPMI Socket, Audio

IEI Option
WIM-HT68-01 Wellsyn IPMI module Hitachi H2168 BMC
CF-514 High performance Skiving Pentium® 4 CPU cooler
page 5-5

w w w. i e i w o r l d . c o m 1-50
 ICPMB-2661 ATX Mother Board, Socket 370 133MHz FSB with LCD/
CRT VGA, Realtek GbE, USB 2.0, 6 COM & Audio

Long Term Supports

CF II

LPT
Gigabit LAN

COM VGA
Audio

USB 2.0 PCI Slots ISA Slots

24 bit LVDS I/F

DDr 266 6 COM
Feature
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz
tin
CRT/LCD integrated in CLE266, support 24-bit LVDS for Dual display Dual lay Tuala por ts
2x DDR 266 support up to 2GB Disp Sup
Support both PCI and ISA extension slots
CFII,GbE, USB2.0, 6 COM ports, Audio integrated
Tech Talk
Specifications
Socket-370 support Intel® Tualatin, PIII, Celeron, VIA C3 with
Benefits of VIA CLE266
CPU
FSB 100/133 MHz
System chipset VIA CLE266 (VT8623 + VT8235) A Leading Edge Digital Video Experience
System The integrated VIA 2D/3D 128-bit graphics engine with internal AGP
2 x DDR 266/200 SDRAM socket support up to 2GB
Memory 8X possesses every feature required for digital video. Hardware
Integrated in VT8623 MPEG-2 decoding delivers must have applications like DVD
Display – Bus: AGP 4X / 8X playback and video streaming at an equivalent level to today's multi-
– DF 14-20F connector for LCD 24-bit LVDS I/F
gigahertz, discrete graphics PC systems, at a fraction of the cost.
SSD 1x onboard Compact Flash™ Type II socket
On-board 10/100/1000Mbps Realtek RTL8110S Gigabit
Ethernet
Ethernet controller High Speed DDR Memory Subsystem
– 5 x RS-232 (4 by pin header) The integrated graphics engine and Socket-370 processor benefit
– 1 x RS-232 / 422 / 485 by pin header from the 2.1GB/sec of bandwidth available from the DDR memory
– 6 x USB 2.0 (2 by pin header) subsystem ensuring system performance is maximized across the
– 2 x ATA-133 IDE channel
whole spectrum of applications.
I/O – 1 x FDD connector, support 1.44 / 2.88 and 3-mode floppy
drive
– 1 x LPT parallel port (Supports SPP/EPP/ECP mode)
Designed for Fanless, Low Power Solutions
– 2 x PS/2 for Keyboard/Mouse
The CLE266 has been designed from the ground up to minimize
– 1 x IrDA by pin header (SIR mode)
power usage and heat dissipation. The low transistor count in the
Audio AC’97 compliant Audio CODEC
graphics core and low voltage DDR memory enable passive cooling
Digital I/O TTL Level, 8 inputs and 8 outputs
solutions, while the CLE266 is fully compatible with the latest mobile
WDT Software programmable supports 1~255 seconds system reset
power management specifications.
Expansion slot 4 x PCI slots, 2 x ISA slots, 1 x PCI/ISA slot
Hardware Provides CPU Vcore, Vcc, CPU / System fan speed and
Monitor temperature detecting function Market Leading South Bridge Technology
Power Control The VT8235 South Bridge possesses a complete suite of the
Meets ACPI 1.1 specification
Function very latest I/O and communication technologies including USB2.0
Power [email protected], [email protected], [email protected], [email protected], enabling peripheral connectivity 40 times faster than in previous
consumption [email protected] , [email protected] (PIII 1.26G, DDR 266 1GB) generation systems and ATA-133, the fastest IDE interface currently
Operating available.
0 ~ 60ºC
Temperature
Relative
5 ~ 95 %, non-condensing
Humidity
Shipped with ATX bracket
Ordering Information
ICPMB-2661GR
IEI Option ATX Mother Board, Socket 370 133MHz FSB with LCD/ CRT VGA,
Realtek GbE, USB 2.0, 6 COM & Audio
CF-507 Note:
Socket 370 slim type CPU cooler For Intel GbE support please contact supplier
page 5-5

1-51 w w w. i e i w o r l d . c o m
 ICPMB-2660 ATX Mother Board, ULV Intel Celeron 400MHz with
LCD/ CRT VGA, Realtek GbE, USB 2.0, 6 COM & Audio

Single
Board
Long Term Supports Computer

PIAGP Series
PICMG
Half-Size
CF II
Industrial
Motherboard
LPT 5.25” NOVA
Gigabit LAN
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane
COM VGA Audio
USB 2.0 PCI Slots ISA Slots LCD
Product
Series

Chassis
24 bit LVDS I/F DDr 266
Power
ss supply
Feature Fanle Dual lay
Disp
6 COM
ULV Intel Celeron 400 MHz CPU for Fanless system support
CRT/LCD integrated in CLE266, support 24-bit LVDS for Dual display Tech Talk Peripheral
2x DDR 266 support up to 2GB
Support both PCI and ISA extension slots
CFII,GbE, USB2.0, 6 COM ports, Audio integrated VIA CLE266 Chipset Introduction
Specifications The VIA CLE266 chipset is the product of a new vision, blending the
power of VIA DDR Chipset technology with the features required for
a complete range of digital video functions. These include MPEG-
CPU Ultra Low Voltage Intel® Celeron 400MHz 2 decoding and video scaling for high quality DVD acceleration
System chipset VIA CLE266 (VT8623 + VT8235) and an integrated 128-bit 2D and 64-bit 3D graphics engine with
System Memory 2 x DDR 266 SDRAM socket support up to 2GB internal AGP 8X and Alpha Blending for multimedia and gaming
Integrated in VT8623 applications. Supplied with 2.1GB per second of bandwidth from
Display – Bus: AGP 4X / 8X the ultra-fast DDR memory subsystem, the VIA CLE266 enables
– DF 14-20F connector for LCD 24-bit LVDS I/F real world performance in key applications like video streaming or
SSD 1x onboard Compact FlashTM Type II socket DVD playback that equals that of the most powerful PC systems in
production today, while operating as part of a fanless power efficient,
On-board 10/100/1000Mbps Realtek RTL8110S Gigabit
Ethernet low cost device. In addition the CLE266 supports CRT, LCD or TV
Ethernet controller
dual display technology, two Video Capture ports and Picture in
Picture functionality for multi-channel capability.
– 5 x RS-232 (4 by pin header)
– 1 x RS-232 / 422 / 485 by pin header
– 6 x USB 2.0 (2 by pin header) The VIA CLE266 North Bridge is connected to the very latest
– 2 x ATA-133 IDE channel in South Bridge technology, the VT8235 through a 4X V-Link
I/O – 1 x FDD connector, supports 1.44/2.88MB and 3-mode connection to the North Bridge transferring data at 266MB/s, twice
floppy drive the speed of the conventional PCI bus. This enables CLE266 based
– 1 x LPT parallel port (Supports SPP/EPP/ECP mode) systems and devices to take advantage of the integrated support for
– 2 x PS/2 for Keyboard/Mouse 6 USB 2.0 ports with 40 times more bandwidth than USB 1.1, as well
– 1 x IrDA by pin header (SIR mode)
as ATA-133, the fastest available IDE interface. Additional features
include integrated VIA MAC for 10/100Mbps Ethernet, integrated PCI
Audio AC’97 compliant Audio CODEC support, 6 Channel Surround Sound AC-97 audio interface and MC-
Digital I/O TTL Level, 8 inputs and 8 outputs 97 modem.
Software programmable supports 1~255 seconds system
WDT
reset
Expansion slot 4 x PCI slot, 2 x ISA slot, 1 x PCI/ISA slot
Hardware
Monitor
Provides CPU Vcore, Vcc, CPU / System fan speed and
temperature detecting function
Ordering Information
Power Control
Meets ACPI 1.1 specification
Function
ICPMB-2660GR
[email protected], [email protected], [email protected], [email protected],
Power ATX Mother Board, ULV Intel Celeron 400MHz with LCD/ CRT
[email protected] , [email protected] (ULV Intel celeron 400 MHz,
consumption VGA, Realtek GbE, USB 2.0, 6 COM & Audio
DDR 266 1GB)
Operating
0 ~ 60ºC Note:
Temperature
For ULV Intel Celeron 650MHz / LV P III 800MHz CPU / Intel
Relative
5 ~ 95 %, non-condensing GbE support, please contact supplier
Humidity

w w w. i e i w o r l d . c o m 1-52
 POS Product Selection Guide

Model Name POS- 478 POS-380 POS-370 POS-EDEN- 400

CPU Socket Socket- 478 Socket-370 On Board CPU

Intel P4/Celeron Intel Coppermine / Tualatin series Intel Coppermine / Tualatin series
CPU Type VIA EDEN 400MHz
with HT Technology P3/Celeron P3/Celeron

FSB 400/533 MHz 66/100/133 MHz 66/100/133 MHz 66/100/133 MHz

Chipset Intel 845 GV + ICH4 VIA CLE266(VT8623+8235) SiS630ST VIA VT8606T + VT82C686B

One DIMM upto

Dual DDR 266/333 upto 2GB Dual DDR 200/266 upto 2GB Dual DIMM upto
Memory 512MB SDRAM +
SDRAM SDRAM 1GB SDRAM
Onboard 64MB SDRAM

Integrated CLE266
Integrate i845GV Integrate ProSavage
single channel 24-bit
NS DS90C2501 Integrate SiS630ST 24-bit TTL/LVDS LCD
Graphic TTL/LVDS LCD interface
LCD controller 50/44-pin 24-bit LCD DB-15 VGA
DB-15 VGA
dual channel LVDS interface TV output
TV-Out(optional)

One 10/100 Mbps Ethernet One 10/100 Mbps Ethernet(R)

Ethernet One 10/100 Mbps Ethernet One 10/100 Mbps Ethernet
and One GbE or One GbE(G)

3 x RS-232
5 x RS-232 3 x RS-232 3 x RS-232
1 x RS-232/422/485
1 x RS-232/422/465 1 x RS-232/422/465 1 x RS-232/422/465
2 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ECP)
I/O Interface 1 x LPT(SPP/EPP/ECP) 2 x LPT(SPP/EPP/ECP) 2 x LPT(SPP/EPP/ECP)
6 x USB 2.0
6 x USB 2.0 5 x USB 1.1 4 x USB 1.1
1 x IrDA
1 x IrDA 1 x IrDA 1 x IrDA
2 x IEEE-1394a
8 x Digital I/O channel 8 x Digital I/O channel 8 x Digital I/O channel
8 x Digital I/O channel

Dual IDE ATA-100

Dual IDE ATA-133 Dual IDE ATA-100 Dual IDE ATA-100
Drive Interface Dual SATA(Optional)
1 x FDD 1 x FDD 1 x FDD
1 x FDD

Audio AC’97 CODEC

SSD CF Type II Socket CF Type II Socket CF Type II Socket CF Type II Socket

Expansion slot 1 x PCI 1 x PCI 1 x PCI 1 x PCISA

[email protected], [email protected]
[email protected]
[email protected], [email protected], [email protected], +5V@6A [email protected], [email protected]
Power [email protected], [email protected]
[email protected] [email protected] [email protected], [email protected]
Consumption [email protected](P3 1GHz , 256MB
(P4 2.4GHz, 1GB DDR333 (P3 500MHz, 128MB SDRAM) (128MB SDRAM)
DDR266 SDRAM)
SDRAM)

Watchdog Timer Software Programmable 1-255 sec system reset

Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function
Monitor

Temperation Range 0 ~ 60ºC

Operation
Relative Humidity
Environment
5 ~ 95 %, non-condensing

Recommand
CF-514 CF-504 CF-504 On Board
Fancooler

1-53 w w w. i e i w o r l d . c o m
 POS-478 POS Board, Socket 478 533MHz FSB with LCD/ CRT
VGA, LAN, GbE, S-ATA, 1394, USB 2.0, 4 COM & Audio

Celeron D Version coming soon !! Single

Board
PCI Computer
1394
PIAGP Series
K/M PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
48-bit dual Add-on Card
channel LVDS USB IVC Card
Backplane
LAN / Giga LAN Audio
COM
VGA LCD
LPT
Product
Feature Series

Intel P4 CPU with HT support upto FSB 533MHz

** Celeron D support.coming soon Chassis
CRT/LCD integrated in i845GV, support 48-bit LVDS
2x DDR 266/333 support up to 2GB Tech Talk
Support 1x PCI expansion slot
Power
CFII, LAN, USB2.0, Multi-COM, Audio, IEEE1394 integrated Available Power Supply Suggestion supply
Model Name Max +12V Max +5V Input
Specifications ACE-940AP
ACE-828A
15A
10A
40A
25A
AC AT
AC ATX
Socket-478 base support Intel Pentium 4/ Celeron up to 533MHz ACE-832A/AP/AP-S 15A 30A AC ATX Peripheral
CPU ACE-840A 15A 40A AC ATX
FSB
System ACE-841AP-S 20A 33A AC ATX
Intel 845GV + ICH4(support Hyper-Threading P4) ACE-850AP 36A 29A AC ATX
Chipset
System ACE-925P 10A 25A 48V DC AT
2 x DDR 266/333 SDRAM socket support up to 2GB ACE-916A 10A 15A AC AT
Memory
ACE-816A 12A 15A AC ATX
VGA chip: Integrated in 845GV chipset
ACE-830VU1 10A 15A 12V DC ATX
– LCD controller: NS DS90C2501 supports up to 1400x1050
resolution, ACE-830CU1/TU1 22A 25A 24/48V DC ATX
LVDS 24/48-bit TFT LCD ACE-818APM 12A 12A AC ATX
Display ACE-728APM 10A 28A AC ATX
– V-RAM: shared with system memory (DVMT technology)
– CRT Resolution: Supports up to 2048x1536 36-bit color display ACE-828M 10A 25A AC ATX
– Connector: DF14-30F for 48-bit Dual channel LVDS, DB-15 and ACE-930AP(230V) 12A 30A AC AT
2x5 box header for CRT display ACE-C232 12A 25A AC AT
SSD One Compact Flash type II socket ACE-R30A/30AP(230V) 15A 35A AC ATX
– 1 x onboard 10/100Mbps Ethernet
Ethernet
– 1 x 10/100/1000Mbps Ethernet (Intel 82540)

Audio
AC ‘97 Codec, 6W Amplify (supports line-in, line-out, mic-in and Dimensions
speak-out)
– 3 x RS232 serial port
– 1 x RS232/RS422/485 selectable port
– 1 x IrDA
– 2 x LPT parallel ports
– 6 x USB 2.0 ports
I/O
– 2 x ATA-100 IDE channel
– 2 x Serial-ATA( Silicon Image SIL3112), equipped with 2 Serial-
ATA cables support RAID 0 (Striping) and RAID 1 (Mirroring) with
Silicon Image Medley-software RAID. (optional)
– 1 x FDD port
IEEE-1394 2 x IEEE-1394a 400Mbps ports (TI TSB43AA22)
Digital I/O TTL Level, 4 x inputs and 4 x outputs
Extension Slot 1 x 32-bit PCI slot
WDT Software programmable supports 1~255 sec system reset
Support ATX function
Power
Consumption
[email protected], [email protected], [email protected], [email protected], [email protected]
(P4 2.4GHz /1GB DDR266 SDRAM)
Ordering Information
Operating POS-478S
0~60ºC
Temperature POS Board, Socket 478 533MHz FSB with LCD/ CRT VGA, LAN,
Relative GbE, S-ATA, 1394, USB 2.0 & Audio
5~95%, non-condensing
Humidity
POS-478
POS Board, Socket 478 533MHz FSB with LCD/ CRT VGA, LAN,
IEI Option GbE, 1394, USB 2.0 & Audio
POS-478E
CF-514 POS Board, Socket 478 533MHz FSB with LCD/ CRT VGA, LAN,
High performance Skiving Pentium® 4 CPU cooler USB 2.0 & Audio
page 5-5

w w w. i e i w o r l d . c o m 1-54
 POS-380 POS Board, Socket 370 133MHz FSB with LCD/
CRT VGA, LAN, USB 2.0, 6 COM & Audio

New Generation of POS Solution!!

Ethernet

K/M

USB 2.0

COM
LPT
VGA

DDr266
Universal AUTO tin
Tuala por ts
Dual lay
Realtek 5.1-channel 6 COM Disp
Socket-370
S u p

Feature
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz What benefits of POS-380
CRT/LCD integrated in VIA CLE266 support 24-bit TTL/LVDS, IEI’s new generation of POS (Point of Sales) series product line in
support dual independent display POS-380 is designed by VIA CLE266 solution within multi-function,
2x DDR 266 support up to 2GB low power consumption and cost effective features. It is design with
support 1x PCI expansion slot universal Socket-370 CPU form factor to support most of VIA C3,
CFII, LAN, USB2.0, 6 COM ports, Audio integrated Intel® Celeron™ and Pentium® III series CPU type. In the POS series
market, usually, it has multi peripheral communication requirements

Specifications such as, Scanner, Card reader and Goods perceptron. To be able
to meet the next generation demand of POS market, iEi’s POS-380
Socket-370 base supports up VIA C3, Intel® Tualutin Pentium® had been concerned the future requirements and design in totally six
CPU
III/Celeron™ up to 133MHz FSB serial communication ports within USB2.0 and IEEE-1394 high speed
System chipset VIA CLE266 (VT8623+8235) transmission interface. It is capable to enhance the support ability
System memory 2 x DDR 200/266 SDRAM socket support up to 2GB in the near future and focused on popular peripheral applications.
Integrated in VT8623 Moreover, following with the new demand on data displaying, POS-
– Resolution: 1920x1440 for CRT display with DB15 and 2x5 380 has also implemented DVI and TV-Out functions to be able to
VGA Display box header support various display type. On the other hand, the most new hard
– DF 14-20F connector for Supports single channel 24-bit TTL / disk transmission interface Serial-ATA can be increase the storage
LVDS LCD interface, support dual independent display
performance by sending the data through out optional GbE LAN to
SSD 1 x Compact Flash™ Type II socket
remote server.
Ethernet – 1 x 10/100Mbps Realtek 8100BL Ethernet Controller
(POS-380R)
Audio AC’97 Codec (Realtek 5.1-channel) Dimensions
– 5 x RS-232 (3 by pin header)
– 1 x RS-232/422/485 selectable
– 1 x LPT supports SPP/EPP/ECP mode
– 6 x USB 2.0 (2 x USB connectors, others by 2 x 4 pin-header)
I/O
– 1 x PS/2 for Keyboard/Mouse
– 2 x IDE ATA 66/100/133 (40-pin with 2.54mm pitch)
– 1 x Floppy (34-pin with 2.54mm pitch)
– 1 x IrDA
Digital I/O TTL Level, 4 x inputs and 4 x outputs
Extension Slot 1 x 32-bit PCI slot
WDT Software programmable supports 1 ~ 255 sec, system reset
Hardware Provides CPU Vcore, Vcc, CPU/ System fan speed and
Monitor temperature detecting function
Power [email protected], [email protected] (STR), [email protected], [email protected]
Consumption (PIII 1GHz , 133MHz FSB 256MB DDR266)
Power
AT & ATX
Connector
Operation
Temperature
0~60°C
Ordering Information
Relative
5~95%, non-condensing
Humidity POS-380R
IEI Option POS Board, Socket 370 133MHz FSB with LCD/ CRT VGA, LAN,
USB 2.0, 6 COM & Audio
Note:
FP24-02-V10: 3.3V Buffered LCD connection board For TV-out / IEEE-1394a / Serial-ATA / Intel LAN supporting demand,
CF-504: Socket-370 CPU Cooler please contact supplier.
page 5-5

1-55 w w w. i e i w o r l d . c o m
 POS-370 POS Board, Socket 370 133MHz FSB with
LCD/ CRT VGA, LAN & Audio

Single
Board
LPT Computer

PIAGP Series
Ethernet
PICMG
Half-Size
K/M Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
USB
IVC Card

COM Backplane

CF II VGA
LCD
tin Product
Feature Dual Tuala por ts Series
View Su p
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz
CRT/LCD integrated in SiS630ST, support 24-bit TTL/LVDS Chassis
Dimensions
2x PC133 SDRAM support up to 1GB
support 1x PCI expansion slot
CFII, LAN, USB,Multi-COM, Audio integrated
Power
supply

Specifications
Socket-370 base supports Tualatin Celeron / Pentium III up to
CPU Peripheral
133MHz FSB
System
SiS 630ST
Chipset
System
Two 168-pin DIMM sockets up to 1GB SDRAM
Memory
– Chip : Embedded in SiS 630ST chipset
– Bus : Internal AGP
– V-RAM : Share with system memory, setting in BIOS up to
64MB
– Resolution : 1600 x 1200 (16-bit colors) for CRT display
– Connectors : DB-15 and 2x5 box hearder for CRT display
Display
– 50-pin pin-header for 24-bit LCD panel
– 44-pin pin-header for 24-bit LCD panel (With FP24-02V10
board)
– Supports dual-view function
– Optional one channel LVDS module
– Support 3.3V or LCD panel
10/100Mbps Ethernet controller on board (Intel 82559/Realtek
Ethernet
RTL-8100)
SSD One Compact Flash™ Type II socket
Audio AC’97 compliant Audio CODEC with 6W x 2 amplifier
– 3 x RS-232 ports
– 1 x RS-232/422/485 selectable port
– 2 x parallel ports (support SPP/EPP/ECP mode)
I/O – 5 x USB 1.1
– 1 x IrDA
EB-4800
Embedded Chassis for POS-370/566
– 1 x FDD
– 2 x ATA-100 IDE channel Supports chassis intrusion detection
Isolated Digital
– Digital Input : 4 channels Specifications
– Digital output : 4 channels
I/O
– Isolated channel with common power
Equipped with ACE-916A PSU
Extension Slot One PCI bus for add-on cards
WDT Software programmable, support 1~ 255 sec. system reset Optional ACE-816/916 series PSU
Power Support two 2.5” drive bay
AT (P8/P9) and ATX
Connector One cooling fan
Power +5V@6A, +12V@170mA, -12V@60mA(Pentium III 500MHz Dimension: 380(W)x60.2(H)x280(D)mm
Consumption CPU and 128MB SDRAM)
Operating
0 ~60ºC (CPU need cooler)
Temperature
Relative
5~95%, non-condensing
Ordering Information
Humidity
GW 900g

IEI Option POS-370N

POS Board, Socket 370 133MHz FSB with LCD/ CRT VGA, Intel
FP24-02-V10 3.3V Buffered LCD connection board LAN & Audio
LVDS-01-R7 One channel LVDS module, 18-bit Work with NEC POS-370R
15”NL1027BC30-04F LCD Panel,...etc. POS Board, Socket 370 133MHz FSB with LCD/ CRT VGA,
CF-504 Socket-370 CPU Cooler Realtek LAN & Audio
page 5-5

w w w. i e i w o r l d . c o m 1-56
 POS-EDEN-400 POS Board, VIA EDEN 400MHz CPU with LCD/
CRT VGA, LAN & Audio

Low Power Consumption & Fanless Solution

10/100 Mbps Ethernet

COM
USB

36-bit LVDS I/F

Compact Flash
at Solder Side
LPT
VGA

s s Optional 400
Fanle (On Board 64 MB SDRAM) MHz
Feature
Embedded VIA Eden 400Mhz CPU for Fanless system support
CRT/LCD integrated in VIA 8606 support 36-bit LVDS,TV-Out
1x PC133 SDRAM support up to 512MB Tech Talk
Support 1x PCISA extenson slot(PCI+ISA)
CFII, LAN, USB,Multi-COM, Audio integrated Why VIA Eden CPU and ProSavage™
PN133T chipset?
Specifications
The VIA Eden™ Platform is a low power, high performance, and
CPU Embedded lower power consumption VIA Eden 400MHz CPU
highly integrated x86 platform that provides the most flexible,
System Chipset VIA VT8606T(PN133T) + VT82C686B compatible, and cost-effective solution for building the emerging
1 x DIMM slot + optional on board 64MB SDRAM support up new generation of connected digital information & entertainment
System Memory
to 512 MB devices. It combines a proven ultra low power sixth generation
– On-chip ProSavage VGA controller processor core with a choice of a highly integrated North Bridge
– Bus: AGP 4x, 66MHz and South Bridge chips, as well as a broad spectrum of expansion
– V-RAM: Share with system memory up to 32MB(SMA options for enhanced communications, connectivity, and multimedia
Display technology)
functions.
– Resolution: Up to 1600X1200 (UXGA)
– Connector:DB-15 and 2x5 box header for CRT display The VIA ProSavage™ PN133T integrated mobile graphics chipset
– DF 14-20F connector for 36-bit LVDS combines the rich 2D/3D graphics capabilities of the proven
Savage4™ graphics core with advanced North Bridge features
SSD 1X Compact Flash™ Type II socket
such as a 133MHz Front Side Bus and 133MHz SDRAM support.
Ethernet 1 x 10/100Mbps Realtek RTL8100BL Fast Ethernet Controller This delivers unrivaled performance and flexibility in an affordable,
Audio AC’97 (VIA 1612A) with 0.25W amplifern highly integrated laptop chipset. With its low power characteristics
and highly integrated nature, the VIA ProSavage PN133T is ideally
– VT82C686B + Winbond 83877 suited for the thin, light and ultra small mobile sectors, and its low
– 3x RS-232 port
cost points also make it appropriate for entry level and mainstream
– 1x RS-232/422/485 ports
– 2x Parallel port
systems.
I/O – 4x USB 1.1 Bringing all the accepted SMA features to the laptop market,
– 1x IrDA (SIR Mode) including extremely low power consumption, effective heat
– 1x FDD dissipation, space saving single chip design and full ACPI
– 2x ATA-100 IDE channel (40-pin/44-pin header) compliance enables OEMs and System Integrators to reduce the
– 1x PS/2 Keyboard/Mouse cost of building smaller, thinner laptops without sacrificing features
Digital I/O 4 x Input and 4 x Output and performance.

Expansion slot 1 x PCISA (PCI+ISA)

WDT Software programmable supports 1~255 sec. system reset
Power [email protected], +12V@260mA,-12V@110mA,+5VSB@150mA
Dimensions
Consumption (Eden 400MHz; CPU/128MB SDRAM; IBM 30GB HDD)
Operating
0~60ºC (CPU cooler required)
Temperature
Relative
5~95%, non-condensing
Humidity

Ordering Information
POS-EDEN-400
POS Board, VIA EDEN 400MHz CPU with LCD/ CRT VGA,
LAN & Audio
POS-EDEN-400-64MB
POS Board, VIA EDEN 400MHz CPU with 64M DRAM, LCD/
CRT VGA, LAN & Audio

1-57 w w w. i e i w o r l d . c o m
 5.25” NOVA Embedded Board Selection Guide
Single
I PM I Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
NOVA- 5.25” NOVA
NOVA-7170EG/E2- NOVA-8890M / 7895(N)(R)(FW),
Model Name NOVA-7171EG NOVA-7898 NOVA-7894R/N NOVA-7830 EPIC NANO
600 MSFG NOVA-
7896(N)(R)(FW) 3.5” WAFER
ETX
Socket- 479 / Socket- 479 /
CPU Socket Socket- 478 Socket-370 PC/104
On Board CPU Onboard
Intel P4 / Celeron Add-on Card
Intel Pentium M / Intel Pentium M / 400 / 533 MHz Intel Coppermine / Tualatin series P3 / Celeron / Socket-370 base series IVC Card
CPU Type
Celeron M 600MHz Celeron M 600MHz support HT FSB 66 / 100 / 133 MHz Backplane
Technology
Intel 852GME + Intel 852GME + VIA CLE 266 + Intel 815E +
Chipset Intel 845 GV + ICH4 Intel 815E + ICH 2 SiS630ST LCD
ICH 4 ICH 4 VT8235 ICH 2
Product
PC100 / 133 PC100 / 133 DDR 200 / 266 PC100 / 133
DDR 266 / 333 DDR 266 / 333 DDR 266 / 333 Series
Memory SDRAM SDRAM SDRAM upto SDRAM
SDRAM up to 2GB SDRAM up to 2GB SDRAM upto 1GB
upto 512MB upto 512MB 1GB upto 512MB
Integrated with Intel
Integrated with Intel Integrated in i845GV Smartasic Chassis
852GME, 48-bit SiS630ST
852GME, 48-bit and NS DS90C2501 SP1015 LCD
LVDS / TTL LCD integrated Integrated in
Graphic LVDS interface, LCD controller , 815E integrated controller, 50-pin
interface, optional 50-pin 24-bit LCD CLE 266
optional 2nd LVDS / dual channel LVDS 36 bit LCD I/F,
2nd LVDS / DVI interface and VGA Power
DVI interface interface VGA
interface supply
Dual 10/100Mbps Dual 10/100Mbps Dual 10/100 Mbps
One 10/100 Mbps
Ethernet (NOVA- Ethernet (NOVA- Ethernet on board Dual 10/100 Mbps
Ethernet and Four 10/100 Mbps One 10/100
Ethernet 7170E2-600)or 7171E2-600)or and optional LAN Ethernet
10/100 Mbps, Ethernet Mbps Ethernet
10/100 Mbps, GbE 10/100 Mbps, GbE module up to six Peripheral
GbE(MSFG)
(NOVA-7170EG) (NOVA-7171EG) LAN
3 x RS-232
3 x RS-232
3 x RS-232 3 x RS-232 3 x RS-232 3 x RS-232 1 x RS-232/422/
1 x RS-232/422/
1 x RS232/422/485 1 x RS232/422/485 1 x RS-232/422/465 1 x RS-232/422/ 485
2 x RS-232 465
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS 465 1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/ 1 x PS/2 KB/MS 1 x LPT(SPP/
1 x LPT(SPP/ 1 x LPT(SPP/EPP/
I/O Interface ECP) ECP) ECP) 1 x LPT(SPP/ EPP/ECP)
EPP/ECP) ECP)
6 x USB 2.0 6 x USB 2.0 4 x USB 2.0 EPP/ECP) 2 x USB 1.1
2 x USB 1.1 2 x USB 1.1
1 x IrDA 1 x IrDA 1 x IrDA 6 x USB 2.0 1 x IrDA
1 x IrDA 1 x IrDA
4x Digital I/O inputs 4x Digital I/O inputs 2 x IEEE-1394a 1 x IrDA 2 x IEEE-1394a
2 x IEEE-
and outputs, TTL and outputs, TTL (MSFG) Video-in
1394a(FW)
Multiplexer
1 x IDE ATA-100/
2 x IDE ATA-100/ 66/33
2 x IDE ATA-100 / 2 x IDE ATA-100 / 66/33 2 x IDE ATA-100/ 2 x IDE ATA-100/ 2 x IDE ATA- 1 x IDE ATA-
Drive
66 / 33 66 / 33 2 x SATA 66/33 66/33 133/100 100/66/33
Interface
1 x FDD 1 x FDD (MSFG) 1 x FDD (-NCF version 1 x FDD 1 x FDD
1 x FDD only)
1 x FDD
C-Media 5.1
Audio AC ‘97 CODEC AC ‘97 CODEC AC’97 CODEC N/A AC’97 CODEC AC’97 CODEC
channels
SSD CF Type II CF Type II CF Type II N/A CF Type II CF Type II CF Type II
[email protected],
[email protected] (P4 [email protected],
[email protected],
2.4GHz , DDR 266 [email protected], [email protected], [email protected],
[email protected]
Power 512MB SDRAM) +5V@9A, [email protected] +5V@5A
TBD TBD (P3 1.2GHz,
Consumption +12V@4A, [email protected] (P3 1.4GHz, (P3 550MHz,
DDR 266
[email protected] (P4-M (P3 933MHz, 256MB SDRAM) 512MB SDRAM)
512MB SDRAM)
2.4GHz , DDR266 256MB SDRAM)
512MB SDRAM)
Software
Watchdog Programmable
Software Programmable 1-255 sec system reset
Timer 1-220 sec
system reset
Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function
Monitor
Operation Temperation Range 0 ~ 60ºC
Environment Relative Humidity 5 ~ 95 %, non-condensing
1 x PCI
1 x PCI
1 x PCI 1 x PCI 1 x PC/104+
Expansion 1 x PCI 1 x Card Bus
1 x PC/104+ (NOVA-7895) 1 x PCI
slot 2 x Socket-PCI I/F for PCMCIA
1 x mini-PCI socket 1 x IPMI socket 1 x PC/104
module
(NOVA-7896)
CF-512 upto 2.5GHz
Recommand
CF-518 CF-518 CF-513 upto CF-504 CF-504 CF-504 CF-504
Fancooler
3.06GHz

w w w. i e i w o r l d . c o m 1-58
 5.25” NOVA Embedded Board Selection Guide

NOVA-7820- NOVA-EDEN- NOVA- 4898N/ ISS-102-300-

Model Name NOVA-C400 NOVA- 4899N/R NOVA-600-R2 NOVA-300-M4
E400 733N/ R R-300 R2
CPU Socket On Board CPU Socket-7 On Board CPU On Board CPU
Intel Pentium
AMD K6/K6-
ULV Intel
VIA EDEN AMD Geode AMD Geode 2/K6-3 AMD Geode
CPU Type VIA EDEN 400 Celeron 400 386SX- 40
733MHz GX1 300MHz GX1 300MHz IDT WinChip GX1 300MHz
MHz
socket 7 series
FSB 66 MHz
Intel 815E + VIA VT8606T + VIA VT8606T + AMD Geode AMD Geode AMD Geode
Chipset ALi Aladdin 4+ ALi M6117C
ICH 2 VT82C686B VT82C686B GX1 + CS5530A GX1 + CS5530A GX1 + CS5530A
SIMM socket
upto 16MB EDO
PC100 / 133 PC100 / 133 PC100 / 133 PC100 / 133 PC100 / 133 PC100 / 133 PC100/133
RAM, on-board
Memory SDRAM SDRAM upto SDRAM upto SDRAM upto SDRAM upto SDRAM upto SDRAM upto
2M(NOVA-300-
upto 512MB 512MB 512MB 512MB 512MB 128MB 512MB
2M) / 4M(NOVA-
300- 4M)
CS5530A
Smartasic CHIPS 69000
50-pin 36-bit 50-pin 36-bit integrated, 50/ HM86508, 1MB CS5530A
SP1015 LCD CS5530A 2MB RAM
LCD LCD 44-pin LCD RAM, 44-pin integrated, 44pin
Graphic controller, 50- integrated 50/44-pin LCD
DB-15 VGA DB-15 VGA (with FP24-01A) LCD LCD, DB-15
pin 36 bit LCD DB-15 VGA (with FP24-01A)
TV output TV output DB-15 VGA DB-15 VGA VGA
I/F, VGA DB-15 VGA
TV-Out
One 10/100 Dual 10/100 Dual 10/100 Three 10/100 One 10/100 One 10 / 100 Three 10/100
Ethernet N/A
Mbps Ethernet Mbps Ethernet Mbps Ethernet Mbps Ethernet Mbps Ethernet Mbps Ethernet Mbps Ethernet
3 x RS-232 3 x RS-232
3 x RS-232 3 x RS-232 3 x RS-232
1 x RS-232/422/ 1 x RS-232/422/
1 x RS-232/422/ 2 x RS-232 1 x RS-232/422/ 1 x RS-232/422/
485 485 1x RS232
485 1 x PS/2 KB/MS 485 485
1 x PS/2 KB/MS 1 x PS/2 KB/MS 3 x RS-232 2x PS/2 KB/MS
1 x PS/2 KB/MS 1 x LPT(SPP/ 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/ 1 x LPT(SPP/ 1 x RS-232/422/ 1x LPT(SPP/
1 x LPT(SPP/ EPP/ECP) 1 x LPT(SPP/ 1 x LPT(SPP/
EPP/ECP) EPP/ECP) 485 EPP/ECP)
I/O Interface EPP/ECP) 2 x USB 1.1 EPP/ECP) EPP/ECP)
4 x USB 2.0 4 x USB 2.0 1 x PS/2 KB/MS 2x USB1.1
2 x USB 1.1 1 x IrDA 2 x USB 1.1 2 x USB 1.1
2 x USB 1.1 2 x USB 1.1 1 x LPT(SPP/ 4x Digital
1 x IrDA 4 x Digital 1 x IrDA 1 x IrDA
1 x IrDA 1 x IrDA EPP/ECP) I/O inputs and
2 x IEEE-1394a I/O inputs and 4 x Digital 4 x Digital
4 x Digital 4 x Digital outputs, TTL
Video-in outputs, TTL I/O inputs and I/O inputs and
I/O inputs and I/O inputs and
Multiplexer outputs, TTL outputs, TTL
outputs, TTL outputs, TTL
1 x IDE ATA- 2 x IDE ATA- 2 x IDE ATA- 2 x IDE ATA-100
2 x IDE ATA-33 2 x IDE ATA-33 2 x IDE ATA-33 1 x IDE PIO- 4
Drive Interface 100/66/33 100/66/33 100/66/33 / 66 / 33
1 x FDD 1 x FDD 1 x FDD 1 x FDD
1 x FDD 1 x FDD 1 x FDD 1 x FDD
C-Media 5.1
Audio AC’97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC N/A N/A N/A
channels
CF Type II
CF Type II CF Type II
SSD CF Type II CF Type II CF Type II DiskOnChip DiskOnChip DiskOnChip
DiskOnChip DiskOnChip
IBM, MicroDrive
[email protected],
[email protected], [email protected], [email protected] [email protected] +12V@100mA
+5V@3A, [email protected], [email protected],
Power +5V@3A (EDEN [email protected] (PentiumMMX (PentiumMMX (LCD display
[email protected] +5V@2A (64MB +5V@2A (32MB
Consumption 400MHz , (256MB 233MHz 233MHz 32MB only)
(256MB SDRAM) SDRAM)
256MB SDRAM) SDRAM) 32MB SDRAM) SDRAM) (64MB SDRAM)
SDRAM)
Software
Watchdog Programmable
Software Programmable 1-255 sec system reset
Timer 1-220 sec
system reset
Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function
Monitor
Operation Temperation Range 0 ~ 60ºC
Environment Relative Humidity 5 ~ 95 %, non-condensing
1 x PCI
1 x PCI
1 x Card Bus 1 x PCI
Expansion slot 1 x PC/104+ 1 x PCI 1 x PC/104
I/F for PCMCIA 1 x PC/104
1 x PC/104
module
Recommand Onboard Fan or
Onboard Fan or Fanless CF-502 Fanless
Fancooler Fanless

1-59 w w w. i e i w o r l d . c o m
 NOVA-7170 5.25” Intel Pentium M / Celeron M CPU with LCD/
CRT VGA, LAN, USB2.0, Audio

Mini-PCI provide wireless application Coming Single

Board
48 bit dual channel LVDS
4 x COM Long Term Supports Soon Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series
2 x DDR 333 up to 2GB PCI CF II
ECC support
Mini PCI CRT Ethernet

Dual lay Chassis

Disp
Feature
Intel Pentium M / Celeron M CPU support up to FSB 533 MHz Power
CRT/LCD VGA integrated in i852GME, support 48-bit LVDS Tech Talk supply
Support independent dual display
2x DDR 266/333 support up to 2GB
Support 1 x PCI and 1 x mini PCI Mini PCI Introduction Peripheral
CFII, Dual LAN, USB2.0, Multi-COM, Audio integrated
The Mini PCI Specification defines an alternate implementation for
Specifications small form factor PCI cards referred to in this specification as a Mini
Socket 479 base support Intel Pentium M CPU up to 533MHz FSB
PCI Card. This specification establishes a high-performance local-
(NOVA-7170E) bus standard for small or restricted mechanical environments. The
CPU
On board ULV Intel Celeron M 600MHz with 512KB L2 Cache (NOVA- key features and benefits as following
7170E-600) - Upgradeability. Mini PCI Cards are removable and upgradeable
System Chipset Intel 852GME + ICH4
with available “new technology” cards.
2x DDR266/333 SDRAM socket up to 2GB
System Memory - Flexibility. A single Mini PCI interface can accommodate various
ECC support
- Display controller types of communications devices, wireless card, Bluetooth …etc.
Intel GMCH Integrated Graphics controller - Serviceability. Mini PCI Cards can be removed and easily serviced
Integrated AGP 4X 2D/3D engine
if they fail.
- One VGA port for CRT monitor 16001200@8bpp;1280X1024@16bpp
Display - DF 14-30F support 48 bit dual chennel LVDS TFT LCD - Reduced Size. Mini PCI Cards are smaller than PCMCIA cards,
- Second 48-bit LVDS Port (Optional) Small PCI cards, and typical daughter boards.
- DVI interface (Optional)
- Dual independent displays

Dimensions
- Shared system memory up to 32MB (DVMT)
Ethernet One Intel 82551ER 10/100Mbs
SSD 1x Compact Flash™ Type II Socket
2 x IDE port
1 x FDD port
1 x Parallel port (Supports SPP/EPP/ECP mode)
1 x PS2 Keyboard/Mouse support
I/O
3 x RS-232 Serial port
1 x RS-232/422/485 selectable
6 x USB 2.0 port
1 x IrDA by pin header (SIR mode)
Audio AC’97 CODEC
Digital I/O 4 inputs / 4 outputs
WDT Software programmable support 1 ~ 255 sec system reset
Power [email protected], [email protected], [email protected] (Pentium M 1.8G, DDR 333
Consumption 256MB)
Expansion slot 1x PCI slot and 1x Mini PCI
Hardware
CPU voltage / Temperature / FAN speed monitor
Monitoring
Power control
Meets ACPI 1.1 specification
function
Operation
0 ~ 60 °C
Temperature
Relative Humidity 5 ~95%, non-condensing Ordering Information
NOVA-7170E-R10
5.25” Socket 479 Intel Pentium M 533MHz FSB with LCD/CRT
VGA, LAN, USB2.0, Audio

IEI Option NOVA-7170E-600-R10

5.25” on board ULV Intel Celeron M CPU with LCD/CRT VGA,
CF-518 Dual LAN, USB2.0, Audio
High Performance Pentium-M CPU Cooler Note: For DVI and second LVDS/ Dual Lan(Intel 82541PI GbE or Intel 82551
page 5-5 ER 10/100 Mbps) please contact supplier

w w w. i e i w o r l d . c o m 1-60
 NOVA-7171 5.25” Intel Pentium M / Celeron M CPU with LCD/
CRT VGA, LAN, USB2.0, IPMI Socket, Audio

COM
Long Term Supports
Coming
48 bit dual channel LVDS
Soon

Rear side

Dual lay
Disp

CF II
Tech Talk

CRT
I PM I
PCI
WIM Socket™ for Ethernet NOVA-7171 provides IPMI function, support
IPMI module 1xCPU FAN, voltage and temperature
Feature recovery capabilities, D I/O logging and
alerting, identification of failed hardware.
Intel Pentium M / Celeron M CPU support up to FSB 533 MHz WIM-HT68-01
CRT/LCD VGA integrated in i852GME, support 48-bit LVDS
Support independent dual display
2x DDR 266/333 support up to 2GB IPMI Main Features
Support IPMI function
CFII, Dual LAN, USB2.0, Multi-COM, Audio integrated IPMI modular design can easily upgrade your system.
Monitor your system health
Specifications (fan/ temperature/ voltage/ processor/ disk/ device ) with or without OS live.
Remote control your system in emergency or requirement, like: power on/off,
Socket 479 base support Intel Pentium M CPU up to 400MHz warm reset, reboot, power cycle ... etc.
FSB Wide range applications including server, KVM, ATM and industrial highly
CPU
On board ULV Intel Celeron M 600MHz with 512KB L2 Cache reliable product application.
(NOVA-7171E2-600) IPMI gives system managers access to platform management information
System Chipset Intel 852GME + ICH4 and control features, allowing more accurate predictions of hardware failures,
2x DDR266/333 SDRAM support up to 2GB diagnostic of hardware problems and the initiation of recovery actions
System Memory
ECC support Eliminate extra maintenance cost
- Display controller IPMI 2.0 compliant (IPMI over LAN, Serial Port and Modem)
Intel GMCH Integrated Graphics controller Emergency Management Port by COM & LAN
Integrated AGP 4X 2D/3D engine
Shares LAN controller with mainboard, and uses out-of-band bandwidth.
- One VGA port for CRT monitor 1600x1200@8bpp ;
1280X1024@16bpp Event Log information
Display - BIOS event - Hardware Monitor Event - System Event
- DF 14-30F support 48 bit dual channel LVDS TFT LCD
- Second 48-bit LVDS Port (Optional) Text Console Redirection
- DVI interface (Optional) - POST - BIOS Setup - DOS Operation
- Dual independent displays
- Shared system memory up to 32MB (DVMT)

Ethernet One Intel 82551QM 10/100Mbps Dimensions

SSD 1x Compact Flash™ Type II Socket
2 x IDE port
1 x FDD port
1 x Parallel port (Supports SPP/EPP/ECP mode)
1 x PS2 Keyboard/Mouse support
I/O
3 x RS-232 Serial port
1 x RS-232/422/485 selectable
6 x USB 2.0 port
1 x IrDA by pin header (SIR mode)
Audio AC’97 CODEC
Digital I/O 4 inputs / 4 outputs
WDT Software programmable support 1 ~ 255 sec system reset
Expansion slot 1x PCI slot and 1x IPMI Socket
Hardware Monitoring CPU voltage / Temperature / FAN speed monitor
Power control
Meets ACPI 1.1 specification
function

Ordering Information
Operation
0 ~ 60 °C
Temperature
Relative Humidity 5 ~95%, non-condensing NOVA-7171E-R10
5.25” Socket 479 Intel Pentium M 533MHz FSB with LCD/CRT
IEI Option VGA, LAN, USB2.0, IPMI Socket, Audio
NOVA-7171E-600-R10
5.25” ULV Intel Celeron-M CPU with LCD / CRT VGA, LAN, USB
WIM-HT68-01 Wellsyn IPMI module Hitachi H2168 BMC
2.0, IPMI socket, Audio
CF-518 High Performance Pentium-M CPU Cooler
page 5-5

1-61 w w w. i e i w o r l d . c o m
 NOVA-8890 5.25” Socket 478 533MHz FSB CPU Board with
LCD/ CRT VGA, LAN, GbE, S-ATA, 1394, USB 2.0

Celeron D Version coming soon !! Single

Board
Supports Intel Pentium® 4/ Long Term Supports Computer
Celeron up to 533 MHz FSB
PIAGP Series
PICMG
LPT
Half-Size
IDE Industrial
Motherboard
Serial-ATA 5.25” NOVA
(optional) EPIC NANO
CF II
3.5” WAFER
ICH4
ETX
PC/104
10/100 Mbps LAN Add-on Card
IVC Card
GbE LAN Backplane

USB
LCD
Intel 82540 Rear side Product
LAN Controller
Series

LVDS Interface
PC/104 Plus
COM
Intel® 845GV Chassis

Specifications Feature Power

supply
Socket-478 base support Intel® Pentium 4-M & Pentium® 4/ Intel P4/Celeron with HT support.
CPU CRT/LCD integrated in i845GV, support 48-bit LVDS
Celeron up to 533 MHz FSB
System Chipset Intel 845GV + ICH4 (support Hyper-Threading Technology) 1x DDR 333 support up to 1GB
System Memory 1 x DDR 266/333 DDR SDRAM socket up to 1GB Support PCI and PC104+ (PCI only) Peripheral
VGA chip: Integrated in 845GV chipset CFII, Dual LAN(MSFG), USB2.0, Multi-COM, Audio,
– LCD controller: NS DS90C2501 supports up to 1400x1050 SATA integrated
resolution, 24/48-bit TFT LCD
Display
– V-RAM: shared with system memory (DVMT technology)
– CRT Resolution: Supports up to 2048x1536 36-bit color
display
– Connector: DF14-30F for 36-bit Dual channel LVDS, DB-15
for CRT display
– 1x10/100 Mbps Ethernet onboard i82562ET(NOVA-8890M)
Ethernet – 1x10/100 Mbps Ethernet onboard i82562ET and 1 x Gigabit
Ethernet onboard i82540(NOVA 8890MSFG)
SSD One Compact Flash Type II socket
IEEE-1394 2 x IEEE-1394a 400Mbps by pin-header (NOVA-8890MSFG) Two USB port
– 3 x RS-232 IEEE-1394 port
– 1 x RS-232/422/485 selectable port
I/O
– 4 x USB 2.0
– 1 x LPT
– 1 x FDD channel support 1.44/ 2.88MB and 3-mode
– 2 x ATA-100 IDE channel (1 x 40-pin, 1 x 44-pin)
– 2 x Serial-ATA parallel to serial (NOVA-8890MSFG)
Audio AC’ 97 Codec EB-2850
Digital I/O TTL Level, 4 inputs and 4 outputs Industrial Embedded chassis for NOVA-8890 Series
WDT Software programmable support 1~255 second system reset
Expansion slot 1 x PCI slot, 1 x PC104+ (Only PCI)
Hardware Provides CPU Vcore, Vcc, CPU/ System fan speed and
monitoring temperature detecting function. Specifications
+5V@ 4.2A ; [email protected] (P4 2.4 GHz/ DDR266 512MB
Power Multi-Mounting design solution for wall-mount/Desk Top/RACK-moumt application
SDRAM)+5V@ 3.9A ; +12V@4A (P4-M 2.4 GHz/ DDR266
Consumption 2 x USB and 1 x IEEE 1394 ports supported on front panel
512MB SDRAM)
User friendly design for Compact Flash using easily
Operating
0~60°C Drive space for one internal 2.5” HDD
Temperature
Support one PC/104 Plus module space
Relative Humidity 5~95%, non-condensing Standard equipped with Power Supply :
ACE-816A 150W ATX Power Supply
Ordering Information ACE-916A 150W AT Power Supply
Optional Power Supply :UPF200-AA 200W ATX Power Supply with PFC function
NOVA-8890M 5.25” Socket 478 533MHz FSB CPU Board with ACE-916AP 150W AT Power Supply with PFC function
LCD/ CRT VGA, LAN, USB 2.0 Color: Dark Blue (PANTONE 433C)
Dimension: 280mm(W) x 88mm(H) x 251mm(D)
NOVA-8890MSFG 5.25” Socket 478 533MHz FSB CPU Board
with LCD/ CRT VGA, LAN, GbE, S-ATA, 1394, USB 2.0
Ordering Information
IEI Option EB-2850/ACE-816A
Industrial NOVA-8890 Embedded chassis with ACE-816A 150W ATX Power
CF-512 CPU cooling fan Supports P4 CPU up to 2.5GHz Supply
CF-513 CPU cooling fan Supports P4 CPU up to 3.06GHz EB-2850/ACE-916A
Industrial NOVA-8890 Embedded chassis with ACE-916A 150W AT Power
CF-515 Skiving CPU cooling fan support P4-M CPU up to 2.6 GHz
page 5-5 Supply

w w w. i e i w o r l d . c o m 1-62
 NOVA-7898 5.25” Socket 370 CPU Board with VGA, Up to 6
LAN, LPT by Pin header

Dual Gigabit LAN Support

NOVA-7898
(Printer port, VGA port by pin header)

Feature
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz
CRT display integrated in i815E
2x PC133 SDRAM support up to 512MB
Support 1x PCI and 2x expansion socket for LAN module up to 6 LAN
CFII, Dual LAN integrated

COM
6 x LAN

Specifications
Supports Intel® Tualatin Socket-370 PIII/ Celeron™ 133MHz
CPU
FSB and VIA C3 Nehemiah (PPGA Celeron is not support)
System Chipset Intel 815E-B step
FWAP-3680L
Rackmount Internet Security Platform with 6 Ethernet Ports and LCD Display
System
2 x PC100/133 SDRAM up to 512 MB
Memory
Chipset integrated AGP 4X
V-RAM: share with system memory by Dynamic Video Memory
One 2.5”HDD drive bay
Display Technology
with anti-vibration drive kti
Resolution: max.1600 x 1200, 8 bit colors for CRT
Connector: external DB-15 for CRT display
External: One RS-232, one VGA, one LPT port connector Two Socket PCI
I/O Internal: One RS-232, IrDA port, two USB by pin-header
IDE: Two ATA-100 channel (1x40 pin header), 1x44 pin header
External RJ-45x6
150W ATX Power Supply
Intel 82562 and 82559 10/100Mbps Ethernet controllers
with PFC Function
onboard
Ethernet
up to 6x LAN with LAN module daughter board, LM-102N
(Dual i82559/i82550), LM-2G (Dual Broadcom 5701/5703 Specifications
Gigabit chip) or LM-2GN (Dual Intel 82540 Gigabit chip) Management: Console on the front panel
1x PCI 32bit/33MHz slot FWAP-3680L supports one A125 16x2 characters LCD display module with
Expansion Slot
2x socket PCI connector for LAN Module daughter board RS-232 interface
WDT Software programmable, support 1~ 255 sec. system reset Ethernet FWAP-3680:
Power Control Supports ATX power External RJ-45 x 6, socket PCI add-on LAN module supports system up to 6
Power LAN ports. Standard equipped with dual Intel 10/100 Mbps LAN controllers
ATX 2.03 1x20pin ATX connector onboardUp to 6x LAN with LAN module daughter board: LM-102R (Dual
Connector
Power 5V@9A, [email protected], [email protected], [email protected](933MHz CPU Realtek 8100), LM-102N (Dual i82559/i82550), LM-2G (Dual Broadcom 5701/
Consumption with 256MB) 5703 Gigabit chip)
Relative WDT: Software programmable, support 1~ 255 sec. system reset
5~95%, non-condensing Vibration: 5 ~ 17Hz, 0.1” double amplitude displacement
Humidity
17 ~ 640Hz, 1.5G acceleration peak to peak
Operating
0~60ºC Shock: 10G acceleration peak to peak (11ms)
Temperature
Operation temperature: 0 ~ 50°C
GW 900g
Color: Dark Blue (PANTONE 433C)

IEI Option ITEM FWAP-3680L

Mount Solution RACK-mount
LM module (Socket PCI connector) Embedded board NOVA-7898
LM-102N-x59 Dual i82559 LAN Module CPU Pentium III (133MHz FSB)
LM-102N-x50 Dual i82550 LAN Module with IPsec Engine System Chipset Intel 815B-E
LM-102R Dual Realtek 8100 LAN Module System Memory DIMM Up to 512MB DRAM
LM-2G Dual Broadcom 5701/5703 Gigabit LAN Module SSD N/A
System FAN Two 40 x 40 x 28 mm
LM-SSLA SSL Accelerator Module
CPU Cooling FAN CF-507
LM-2GN Dual Intel 82540/82541 Gigabit Ethernet Module Power Supply ACE-816APS
CB-USB02 Dual ports USB cable with bracket DC Power Supply ACE-815C / ACE-815T
page 5-6
Dimension 431(W)x44(H)x251(D)mm
CF-504 Drive Bay One 2.5” HDD
Slim Type Copper Socket-7/370 CPU Cooler
page 5-5

Ordering Information
NOVA-7898 5.25” Socket 370 CPU Board with VGA, Up to 6
LAN, LPT by Pin header
LM-2G LM-SSLA LM-102R LM-102N LM-2GN

1-63 w w w. i e i w o r l d . c o m
 NOVA-7896
5.25” Socket 370 CPU Board with LCD/
NOVA-7895
5.25” Socket 370 CPU Board with LCD/
CRT VGA, LAN, 1394 & Audio CRT VGA, LAN, 1394 & Audio
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

NOVA-7896 NOVA-7895
LCD
tin
Tuala por ts
Product

Feature
Series
Sup
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz
CRT/LCD, support 24-bit TTL LCD,TV-Out(Optional) shared system Chassis
memory up to 64M SDRM
1x PC133 SDRAM support up to 512MB
Support PCI and PC/104(7896) or PC/104+(7895 PCI only) Power
CFII, Dual LAN, USB, Multi-COM, Audio integrated supply

Specifications
CPU Supports Intel Tualatin Scoket-370 66/100/133MHz FSB Peripheral
System
Chipset
SiS 630ST, PCI 2.2 compliant EB-2820
System Embedded Chassis for NOVA-7895/7896
1x PC 100/133 SDRAM support to 512MB
Memory

Display
SiS630ST chipset integrated 2D/3DGraphic Core
Resolutions: up to 1920x1440 Specifications
V-RAM: Share system memory up to 64MB SDRAM
by SIS630ST chipset 50-pin connector to support 24-bit LCD Supports one PC/104 module space
Optional LCD
panelequipped with FP24-02V10 for 44-pin 24-bit Panel Equipped with ACE-916A PSU
Interface
connection Optional ACE-816/916 series PSU
2x 10/100Mbps fast Ethernet controller onboard (Intel 82559 /
Ethernet Support two 2.5” drive bay
Realtek RTL8100BL)
SSD 1x Compact Flash Type II socket onboard
Two cooling fans
– 3x RS-232 series port by pin header (16C550 UARTs Dimension: 325mm(W)x 50mm(H)x 300mm(D)
Compatible)
– 1xRS-232/422/485 selectable port

I/O
– 1x LPT by pin header (support SPP/EPP/ ECP mode)
– 1x IrDA (SIR mode) Ordering Information
– 2xUSB port by pin header (USB 1.1 Compliant)
– 1x FDD channel support 1.44MB, 2.88MB and 3-mode
– 2x ATA-100 IDE channel, support CD-ROM; ZIP and LS-120 EB-2820/ACE-916A
bootable.(NCF version only, standard version support one IDE Embedded chassis with ACE-916A 150W AT power supply
ATA-100 channel) EB-2820/ACE-816A
AC’97 compliant Audio CODEC with 6W Amplifer (Line-in, Line-
Audio Embedded chassis with ACE-816A 150W ATX power supply
out, Mic-in by pin header)
IEEE-1394 2x IEEE-1394a 400Mbps port onboard (FW Version)
WDT software programmable support 1~255 second system reset
Expansion
One PCI slot PC/104 Plus (NOVA-7895), PC/104 (NOVA-7896)
Slot
Isolated Digital
4 Inputs and 4 Outputs
Ordering Information
I/O
Hardware
CPU Vcore; Vcc; CPU/System Fan speed and Thermal
Monitoring
ATX power NOVA-7896R 5.25” Socket 370 CPU Board with LCD/ CRT
control Meets ACPI 1.1 VGA, Realtek LAN & Audio
function NOVA-7896RFW 5.25” Socket 370 CPU Board with LCD/ CRT
Power
[email protected], [email protected] (Pentium III 1.4GHz/256MB) VGA, Realtek LAN, 1394 & Audio
Consumption
Operating NOVA-7895R 5.25” Socket 370 CPU Board with LCD/ CRT
0~60°C (CPU cooler required)
Temperature VGA, Realtek LAN, PC/104+ & Audio
Relative
Humidity
5-95%, non-condensing NOVA-7895RFW 5.25” Socket 370 CPU Board with LCD/ CRT
GW 900g VGA, Realtek LAN, PC/104+, 1394 & Audio
Remark 8-bit limited ISA (LPC-ISA) NOVA-7895N 5.25” Socket 370 CPU Board with LCD/ CRT
VGA, Intel LAN, PC/104+ & Audio
IEI Option NOVA-7895NFW 5.25” Socket 370 CPU Board with LCD/ CRT
CF-504 VGA, Intel LAN, PC/104+, 1394 & Audio
Slim Type Copper Socket-7/370 CPU Cooler
page 5-5

w w w. i e i w o r l d . c o m 1-64
 NOVA-7894 5.25” Socket 370 CPU Board,with VGA, 4 LAN,
2 COM, USB 2.0

Socket-370 COM 4 x 10/100 Mbps Ethernet

PCI Slot

Feature
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz
CRT display integrated in CLE266
tin
Tuala por ts
1x DDR 266 dupport up to 1GB
support 1x PCI expansion slot
CFII, 4x LAN, USB2.0, Multi-COM, Audio integrated
DDR 266 Sup

Specifications
CPU
Supports Intel FCPGA/FCPGA2 Pentium III / Tualatin / Celeron/
VIA C3 processor up to 1.4 GHz with 133 MHz FSB
Application Example:
System Chipset VIA CLE266 + VT8235
System
1 x DDR 266 SDRAM Socket up to 1GB
Memory
Chipset integrated SBC-1
Display
– 1 x DB-15/Pin-header for VGA display
SSD 1 x Compact Flash™ Type II socket on rear side
4 x 10/100Mbps Intel 82551QM/Realtek RTL8100BL Ethernet
Ethernet
LAN Controller
– 2 x RS-232 serial ports SBC-2
– 6 x USB2.0
– 1 x LPT by pin header (supports SPP/EPP/ECP mode)
– 1 x PS/2 for Keyboard
Identification
I/O
– 1 x PS/2 for Mouse Server
– 2 x IDE ATA-100/133 by pin header (40-pin with 2.54mm pitch) SBC-3
– 1 x Floppy by pin header (26-pin with 2.54mm pitch)
– 1 x IrDA You can identify most of IEI series SBC board which
TM
Digital I/O TTL Level 4 input & 4 output is embedded both your f/w and iButton device
WDT Software programmable supports 1 ~ 255 sec, system reset support inside…
Hardware Provides CPU Vcore, Vcc, CPU/ System fan speed and
Monitor temperature detecting function
al!
is illeg
SBC-4
Power
[email protected], [email protected] (P3 1.2GHz, 512MB SDRAM)
Consumption
Operation
0º~60ºC
Temperature SBC-1
Relative
5~95%, non-condensing
Humidity

SBC-2
Ordering Information Ø
Identification
NOVA-7894N
5.25” Socket 370 CPU Board,with VGA, 4 Intel LAN, 2xCOM, USB Server SBC-4
2.0
NOVA-7894R SBC-3
5.25” Socket 370 CPU Board,with VGA, 4 Realtek LAN, 2 COM,
USBx2.0

IEI Option If some hackers cloned any of your iButtonTM

implemented series board, the identification server
CF-504 can deny its service request…
Slim Type Copper Socket-7/370 CPU Cooler
page 5-5

1-65 w w w. i e i w o r l d . c o m
 NOVA-7820/7830 5.25” S-370 / EDEN with LCD/ CRT VGA, LAN,
Video Capture, 1394 & Audio

4 vedio input for survelliance system Single

Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane
NOVA-7820
NOVA-7830

Feature LCD
Product
Intel PIII / Tualatin / Celeron CPU support up to FSB 133 MHz Series
4 x RCA
Connector Cable VIN-KIT-01 CRT/LCD integrated in Smartasic SP1015 support 36-bit TTL LCD
4 x BNC Connector Board 1x PC133 SDRAM support up to 512MB
support 1x PCI expansion slot Chassis
CFII, LAN, USB, Multi-COM, Audio, IEEE1394, Video-in Multiplexer
Specifications integrated

NOVA-7820 NOVA-7830 Power

supply
Intel Socket 370 Tualatin Pentium
CPU VIA low power Eden 400MHz
III/Celeron, up to 133MHz FSB
System Intel 815E + ICH2 PCI 2.2 Intel 815E + ICH2 PCI 2.2
Chipset compliant compliant
Peripheral
System
1 x DIMM up to 512MB SDRAM 1 x DIMM up to 512MB SDRAM
Memory
Intel 815 chipset Intel 815 chipset
AGP 4X AGP 4X
V-RAM: V-RAM:
CRT Display shared with system memory shared with system memory EB-2830
(DVMT) (DVMT) Embedded chassis for NOVA-7800 series
Connector: Connector:
DB-15 for CRT display DB-15 for CRT display
Controller:
Controller: Specifications
Smartasic SP1015
Smartasic SP1015 Support Embedded SBC: NOVA-7800 series
LCD Display Resolution: up to 1024 x 768,
Resolution: up to 1024 x 768, 36bit Support Power Supply: Equipped with ACE-816A, Optional,
36bit
Connector: 50 pin by pin-header
Connector: 50 pin by pin-header ACE-815T,ACE-815C PSU
1 x 10/100 Mbps Fast Ethernet 1 x 10/100 Mbps Fast Ethernet Drive bays: Two internal 2.5” HDD drive bays
Ethernet
(Intel 82562) (Intel 82562) Accept one half-size PCI add-on card
1 x Compact Flash™ type II Color: Dark Blue (PANTONE 433C)
SSD 1 x Compact Flash™ type II socket
socket Dimension: 350mm(W) x 64mm(H) x 251mm(D)
C-Media 5.1 channels PCI 6W C-Media 5.1 channels PCI 6W
Audio
Multiplexer
Amplifier
Video-in Multiplexer
Amplifier
Video-in Multiplexer
Ordering Information
2 x IEEE-1394a 400MHz ports 2 x IEEE-1394a 400MHz ports
IEEE-1394
(TI TSB43AB22) (TI TSB43AB22) EB-2830/ACE-816A
3 x RS-232 3 x RS-232 Embedded chassis for NOVA-7800 series with ACE-816A150W
1 x RS-232/422/485 1 x RS-232/422/485 ATX power supply
1 x LPT 1 x LPT
I/O
2 x USB 1.1 2 x USB 1.1
EB-2830/ACE-815T
1 x FDD 1 x FDD Embedded chassis for NOVA-7800 series with ACE-815T 150W
1 x ATA-100 1 x ATA-100 ATX power supply
WDT
Programmable 1~255 seconds Programmable 1~255 seconds EB-2830/ACE-815C
system reset system reset
Embedded chassis for NOVA-7800 series with ACE-815C 100W
1 x 32bit PCI 1 x 32bit PCI
Expansion
1 x Card Bus I/F for PCMCIA 1 x Card Bus I/F for PCMCIA ATX power supply
Slot
module module
Operation 0oC ~ 60oC
0oC ~ 60oC
Temperature
Relative 5 ~ 95%,
(CPU cooler required)
5 ~ 95%,
Ordering Information
Humidity non-condensing non-condensing
[email protected], [email protected] [email protected], [email protected]
NOVA-7830
Power 5.25” Socket 370 CPU Board with LCD/ CRT VGA, LAN, Video
(EDEN 400MHz with 256MB (PIII 550MHz with 512MB
Consumption
SDRAM) SDRAM) Capture, 1394 & Audio
Video capture: 4 x AV input by cable with bracket NOVA-7830B
- Chip: Conexant Fusion 878A - OS support: Windows 98SE/2000/ME/XP 5.25” Socket 370 CPU Board with LCD/ CRT VGA, LAN, Video
- Frame speed: 30FPS - Standard equipped with one 4 x RCA Capture, 1394, Audio & VIN-Kit-01
- Video format: NTSC/PAL/SECAM connector cable, optional one 4 x BNC NOVA-7820-E400
5.25” VIA EDEN 400MHz CPU Board with LCD/ CRT VGA, LAN,
IEI Option Video Capture, 1394 & Audio
NOVA-7820B-E400
CF-504 5.25” VIA EDEN 400MHz CPU Board with LCD/ CRT VGA, LAN,
Slim Type Copper Socket-7/370 CPU Cooler (NOVA-7830)
Video Capture, 1394, Audio & VIN-Kit-01
page 5-5

w w w. i e i w o r l d . c o m 1-66
 NOVA-C400 5.25” ULV Intel Celeron- 400MHz CPU Board,
with VGA/LCD, USB 2.0, Dual LAN & Audio

Intel Lowpower Consumption CPU Ready!!

ne
All-in O
36 bit LVDS I/F
CF II

PC/104 Plus

4 x RS-232
Dual 10/100 Serial Ports
Mbps Ethernet
s s
Fanle
PC/104

ULV Intel Celeron CPU

Specifications
Feature
Embedded ULV Intel Celeron 400 CPU for Fanless system support
CPU Ultra Low Voltage Intel Celeron 400MHz CRT/LCD integrated in VT8606, support 36-bit LVDS/TTL, TV-Out
System chipset VIA VT8606T (PN133T) + VT82C686B
2x PC133 SDRAM support up to 512MB
System
1 x PC100/133 SDRAM up to 512MB Support 1x PCI and (ISA+PCI), PC/104+ extension slots
Memory
– On-chip ProSavageTM VGA controller CFII, Dual LAN, USB2.0, Multi-COM, Audio integrated
– Bus: AGP 4X
– V-RAM: Shared with system memory up to 32MB (SMA
Technology)
Display – Resolution: Up to 1920 x 1440 CRT display
– Connector: DB-15 for CRT display
Coming
Soon
– LCD: DF 14-20F for 36-bit LVDS and 1 x 50-pin by pin-header
for TTL
– TV-Out: Both NTSC and PAL output signal are supported
SSD 1x onboard Compact Flash™ type II socket
2 x onboard 10/100Mbps Intel 82551 / Realtek RTL8100BL fast
Ethernet
Ethernet controller
Audio AC’97 compliant Audio CODEC
– 3 x RS-232 serial port by pin-header
– 1 x RS-232/422/485 port by pin header
– 1 x LPT parallel port by pin-header (Supports SPP/EPP/ECP
mode)
– 1 x IrDA (SIR mode)
I/O – 4 x USB 2.0 and 2 x USB 1.1 ports by pin-header
– 2 x ATA/100 IDE channel, supports CD-ROM, ZIP and LS-120
EBC-2700
Industrial Embedded Chassis
drive bootable (IDE 1: 40-pin, IDE 2: 44-pin)
with NOVA-C400 and NOVA-
– 1 x PS/2 for Keyboard / Mouse
EDEN-733 SBC
– 1 x FDD connector, support 1.44 / 2.88 and 3-mode floppy
drive
WDT Software programmable supports 1~255 seconds system reset
PC/104 and
PC/104 Plus
For PCI and ISA device modules expansion
Specifications
Digital I/O TTL Level 4-input and 4-output
Hardware Provides CPU Vcore / Vcc; CPU / System Fan speed and Designed to mount on Desk top and Wall mount application
Monitoring temperature detecting function Front panel equipped with two USB ports
ATX power Drive space for one internal 2.5” HDD
control Meets ACPI 1.1 specification
Equipped with one 4cm system
function
Power Support one PC/104 or PC/104 Plus module space
[email protected], +12V@500mA (512MB SDRAM) Standard equipped with power supply: ACE-890A 90W AT power
Consumption
Operating supply
0 ~ 60ºC
Temperature Optional power supply: ACE-890AP/C/T/V/P AT power supply
Relative Color: Dark Blue (PANETONE 433C)
5 ~ 95 %, non-condensing
Humidity Dimension: 180mm (W) x 88mm (H) x 230mm (D)

Ordering Information
NOVA-C400N Ordering Information
5.25” ULV Intel Celeron-400MHz CPU Board, with VGA/LCD, USB
2.0, Dual Intel LAN & Audio
EBC-2700/ACE-890A
NOVA-C400R Industrial Embedded chassis with ACE-890A AT power supply
5.25” ULV Intel Celeron-400MHz CPU Board, with VGA/LCD, USB
2.0, Dual Realtek LAN & Audio
EBC-2700/ACE-890C
For ULV Intel Celeron 650MHz / LV PIII 800 MHz CPU supports, Industrial Embedded chassis with ACE-890C AT power supply
please contact supplier

1-67 w w w. i e i w o r l d . c o m
 NOVA-EDEN-733 5.25” VIA EDEN 733MHz CPU Board, with
VGA/LCD, USB 2.0, Dual LAN & Audio
Single
All-in One Embedded Solution Board
Computer

PIAGP Series
PICMG
Half-Size
36 bit LVDS I/F Industrial
Motherboard
CF II 5.25” NOVA

PC/104 Plus EPIC NANO

3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Dual 10/100 Mbps Backplane
Ethernet

LCD

nless
Product
4 x RS-232
VIA CPU
Fa Serial Ports
Series

Specifications Feature Chassis

Embedded low power consumption VIA Eden CPU (EBGA

CPU Embedded VIA Eden 733Mhz CPU for Fanless system support
package)
System chipset VIA VT8606T (PN133T) with VT82C686B CRT/LCD integrated in VT8606, support 36-bit LVDS/TTL, TV-Out Power
System memory 1x PC100/133 SDRAM up to 512MB 2x PC133 SDRAM support up to 512MB supply
– On-chip ProSavage™ VGA controller support 1x PCI and (ISA+PCI), PC/104+ extension slots
– Bus: AGP 4x CFII, Dual LAN, USB2.0, Multi-COM, Audio integrated
– V-RAM: Shared with system memory up to 32MB (SMA
technology) Peripheral
Display – Resolution: Up to 1920x1440 (CRT)

Coming
– Connector: DB-15 for CRT display
– DF 14-20F for 36-bit LVDS, 50 pin header for LCD digital

Soon
signal output
– TV-OUT: Both NTSC and PAL output signal are supported
SSD 1x on board Compact Flash type II socket
– 2x on board 10/100Mbps fast Ethernet controller
Ethernet – Dual Intel 82551: NOVA-EDEN-733N
– Dual Realtek RTL8100BL: NOVA-EDEN-733R
Audio On board AC’97 codec with 6W amplifier
– 3 x RS-232 serial ports by pin-header
– 1 x RS-232/422/485 selectable port
– 1 x LPT parallel port by pin-header (supports SPP/EPP/
ECP mode)
– 1 x IrDA (SIR mode)
I/O – 4 x USB 2.0 + 2 x USB 1.1 by pin-header EBC-2700
– 2 x ATA/100 IDE channel, supports CD-ROM, ZIP and LS- Industrial Embedded Chassis
120 drive bootable with NOVA-C400 and NOVA-
(IDE1: 40-pin, IDE2: 44-pin). EDEN-733 SBC
– 1 x FDD connector, supports 1.44/2.88MB and 3-mode
floppy drive
Software programmable supports 1~255 seconds system
WDT
reset
PC/104 and PC/104
For PCI and ISA device modules expansion
Specifications
Plus
– 1x 32-bit/33MHz PCI expansion slot for PCI devices Designed to mount on Desk top and Wall mount application
expansion Front panel equipped with two USB ports
Expansion slot
– 1x PC/104 for ISA device modules expansion
Drive space for one internal 2.5” HDD
– 1x PC/104 Plus for PCI device modules expansion
Digital I/O 4 Inputs and 4 outputs Equipped with one 4cm system
Hardware Provides CPU Vcore, Vcc; CPU/System fan speed and Support one PC/104 or PC/104 Plus module space
Monitoring temperature detecting function. Standard equipped with power supply: ACE-890A 90W AT power
ATX power control supply
Meets ACPI 1.1 specification
function Optional power supply: ACE-890AP/C/T/V/P AT power supply
Power
[email protected]; 12V@160mA (with 256MB SDRAM) Color: Dark Blue (PANETONE 433C)
Consumption
Operating Dimension: 180mm (W) x 88mm (H) x 230mm (D)
0~60°C
Temperature
Relative Humidity 5~95%, non-condensing

Ordering Information Ordering Information

NOVA-EDEN-733N 5.25” VIA EDEN 733MHz CPU Board, with EBC-2700/ACE-890A
VGA/LCD, USB 2.0, Dual Intel LAN & Audio Industrial Embedded chassis with ACE-890A AT power supply
NOVA-EDEN-733R 5.25” VIA EDEN 733MHz CPU Board, with
VGA/LCD, USB 2.0, Dual Realtek LAN & Audio EBC-2700/ACE-890C
Notes: Industrial Embedded chassis with ACE-890C AT power supply
Contact Supplier about other VIA CPU’s

w w w. i e i w o r l d . c o m 1-68
 NOVA-4899 5.25” GX1-300MHz CPU Board with VGA, 3 LAN,
VGA, CFII

SO-DIMM CF-II PCI Slot

Networking Platform
Integrated Solution Ready!

FWAP-2680L
Desktop Solution

DOC
VGA pin
hearder COM 3 x 10/100 Mbps Ethernet

s s
Feature Fanle
Embedded AMD Geode GX1-300 CPU for Fanless system support
CRT display integrated in CS5530A, support 18-bit TFT LCD,
LVDS(optional), TV-Out One 2.5”HDD drive bay
1x PC133 SDRAM SO-DIMM support up to 512MB
support 1x PCI expansion slot
CFII, DOC, Triple LAN, USB, Audio integrated

Specifications
CPU AMD Geode GX1-300MHz
BIOS Award PnP Flash BIOS
System Chipset AMD Geode GX1 + CS5530A
System Memory One 168-pin DIMM socket up to 512MB SDRAM
– Built-in CS5530A chipset, supports TFT LCD & CRT display
– V-RAM: Share with system memory (up to 4MB), setting in
BIOS Specifications
– Resolution: 1280 x 1024 for CRT display
– Connector: 10-pin pin-header for CRT display (Shipping with Management: Console on the front panel
Display
cable for DB-15 connector)
FWAP-2680L supports one A125 16x2 characters LCD display
50-pin pin-header for 18-bit TFT LCD
44-pin pin-header for 18-bit LCD (With FP24-01A board) module with RS-232 interface
Built-in TV out function supports NTSC and PAL signal Ethernet: FWAP-2680: External RJ-45 x 3,
Optional LVDS-01 LVDS module for LVDS LCD panel WDT: Software programmable, support 1~ 255 sec. system reset
3 x 10/100Mbps Intel i82551/Realtek RTL8100BL Ethernet Vibration: 5 ~ 17Hz, 0.1” double amplitude displacement
Ethernet
controller 17 ~ 640Hz, 1.5G acceleration peak to peak
SSD 1 x Compact Flash™ Type II socket and 1 x DiskOnChip socket Shock: 10G acceleration peak to peak (11ms)
Audio AC’97 Codec (Realtek ALC 202A) Operation temperature: 0 ~ 50°C
– 2 x RS-232 serial port Color: Dark Blue (PANTONE 433C)
– 1 x LPT parallel port supports SPP/ECP/EPP Mode
I/O – 2 x USB 1.1 ITEM FWAP-2680L
– 2 x ATA-33 IDE (40/44-pin by pin header)
Mount Solution Desktop and Wall mount
– 1 x Floppy (34-pin with 2.54mm pitch)
Embedded board NOVA-4899
Digital I/O TTL level, 4 x inputs and 4 x outputs
CPU NS Geode GX1-300MHz
Expansion slot 1 x PCI slot
System Chipset NS CS5530A
WDT Software programmable supports 1 ~ 255 sec system reset
System Memory SO-DIMM Up to 512MB DRAM
Power Supply
4-pin power housing (5.25” Drive Connector) SSD 1 x Compact Flash™ type II
Input
Power System FAN One 40 x 40 x 10 mm
5V@2A, 12V@100mA (With 64MB SDRAM)
Consumption CPU Cooling FAN Fan-less
Operation Power Supply AC Input 46W Adapter
0~60°C
Temperature DC Power Supply N/A
Relative Dimension 320(W)x44(H)x165(D)mm
5~95%, non-condensing
Humidity Drive Bay One 2.5’ HDD

Ordering Information
Ordering Information
NOVA-4899N FWAP-2680
5.25” GX1-300MHz CPU Board with VGA, 3 Intel LAN, VGA, CFII Rackmount Internet Security Platform with 3 Ethernet Ports
NOVA-4899R FWAP-2680L
5.25” GX1-300MHz CPU Board with VGA, 3 Realtek LAN, VGA, Rackmount Internet Security Platform with 3 Ethernet Ports and
CFII LCD Display

1-69 w w w. i e i w o r l d . c o m
 NOVA-4898 5.25” GX1-300MHz CPU Board with LCD/ CRT
VGA, TV Out, LAN & Audio
Single
EM B EDD
Board
ss
E

Fanle
Computer

D–
PC
MO
U

D
L E S PIAGP Series
PICMG
Half-Size
Rear Side Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane
CF Type II Socket

LCD
AMD GX1 300 PC/104 Feature Product
Series
Intel 82551 LAN DiskOnChip Socket
FP24-01A AMD Geode GX1-300 CPU for Fanless system support
(or Realtek 8100BL LAN)
CRT display integrated in CS5530A, support LVDS module
(optional), TV-Out Chassis
1x PC133 SDRAM support up to 512MB
Specifications Support 1x PCI and PC/104 extension slots
CFII,DOC,LAN, USB, Multi-COM, Audio integrated Power
CPU Embedded AMD Geode GX1 300MHz
BIOS Award PnP Flash BIOS supply
System Chipset AMD Geode™ GX1 + CS5530A
System Memory 1 xPC100/133 SDRAM up to 512MB
– Built-in CS5530A chipset, supports TFT LCD & CRT Peripheral
display
– V-RAM: Share with system memory (up to 4MB), setting
in BIOS
– Resolution: 1280 x 1024 for CRT display
– Connector: 10-pin pin-header for CRT display
Display (Shipping with cable for DB-15 connector)
50-pin pin-header for 18-bit TFT LCD
44-pin pin-header for 18-bit LCD (With FP24-01A board)
Built-in TV out function supports NTSC and PAL signal
Optional LVDS-01 LVDS module for LVDS LCD panel
– Ethernet : Intel 82551 or Realtek RTL-8100BL 10/100Mbps
Ethernet Controller on board
One DiskOnChip socket and one CF Type II socket (Support EB-2810
SSD Embedded Chassis for NOVA-4898
IBM Microdrive compact size HDD)
Audio AC’97 compliant Audio CODEC
– 3 x RS-232 port
– 1 x RS-232/422/485 selectable port
Specifications

MB-3200
– Serial ports provides +5V & +12V power supply
– 1 x parallel port (support SPP/EPP/ECP mode) Support one PC/104 module space
I/O
– 2 x USB 1.1 (pin header) Equipped with ACE-916A PSU
– 1 x IrDA port
Optional ACE-816/916 series PSU
– 1 x FDD port
Support two 2.5” drive bay
– 2 x ATA-33 IDE channel (40-pin/44-pin)
Two cooling fans
Digital I/O TTL level, 4 x inputs and 4 x outputs
Dimension: 325mm(W)x 50mm(H)x 300mm(D)
WDT software programmable, support 1~ 255 sec. system reset
Power Control
Support ATX function
Function
Expansion Slot One PCI slot and one PC/104 connector for add-on card
Ordering Information
Power +5V@2A, +12V@100mA (GX1 300MHz CPU and 32MB
Consumption SDRAM) EB-2810/ACE-916A
Operating Embedded chassis with ACE-916A 150W AT power supply
0~60ºC EB-2810/ACE-816A
Temperature
Relative Humidity 5~95%, non-condensing Embedded chassis with ACE-816A 150W ATX power supply
GW 700g
Note Equipped with a standard FP24-01A board

IEI Option Ordering Information

LVDS-01-R7 NOVA-4898N-300-R4
One channel LVDS module, 18-bit Work withNEC 15” 5.25” GX1-300MHz CPU Board with LCD/ CRT VGA, TV Out,
NL1027BC30-04F LCD Panel,...etc. Intel LAN & Audio, R4
CB-USB02 NOVA-4898R-300-R4
Dual ports USB cable with bracket 5.25” GX1-300MHz CPU Board with LCD/ CRT VGA, TV Out,
page 5-6 Realtek LAN & Audio, R4

w w w. i e i w o r l d . c o m 1-70
 NOVA-600
5.25” Socket-7 CPU Board with LCD/
NOVA-300
5.25” 386SX-40 CPU Board with LCD/
CRT VGA (2MB), LAN, 4 COM CRT VGA (1MB), 4MB DRAM

HM 86508 LCD/CRT VGA

NVCB-01

NVCB-03

NVCB-02 One SIMM/16MB EDO RAM

s
or 4MB EDD n board
s
Fanle
+5V
Only EM B EDD
E

Feature
D–
PC
MO

EM B EDD

+5V
U E
D

L E S

D–
Feature

PC
Intel PentiumMMX CPU supports up to FSB 66 MHz Only

MO
U

D
L E S
CRT/LCD integrated in Asiliant 69000, support 36-bit TTL LCD,
LVDS(Optional) Embedded ALi 386SX-40 CPU for Fanless system support
1x PC133 SDRAM support up to 128MB CRT/LCD intergated in HM86508, support 24-bit LCD
support 1x PCI expansion slot 1x SIMM socket up to 16MB EDO RAM, onboard 4MB
DOC,LAN, USB, Multi-COM integrated Support PC/104 extension slot
DOC, Multi-COM integrated

Specifications Specifications
Socket-7 base support Intel® Pentium® MMX, AMD K6, IDT WinChip
CPU
.... up to 66MHz FSB CPU 386SX-40 on board (Embedded in ALi M6117 chipset)
External Cache
512KB System Chipset ALi M6117C
Memory
System Memory 1 x PC100/133 up to 128MB One 72-pin SIMM socket up to 16MB EDO RAM; optional 4 MB on
System Memory
System Chipset ALi Aladdin 4+ board for OEM requirement
– Chip: Asiliant 69000 LCD/CRT VGA – Chip: HM86508 LCD/CRT VGA
– Bus: PCI – V-RAM: 1MB EDO RAM
– V-RAM: 2MB RAM Display – Resolution: 1024 x 768 (256 colors)
– Resolution: 1280 x 1024 (256 colors) – Connectors: DB-15 for CRT display
Display – Connectors: DB-15 for CRT display – 44-pin pin-header for LCD panel
50-pin pin-header for 36-bit LCD panel
44 pins pin-header for 24-bit LCD panel (With FP24-01A board) – 3 x RS-232 ports
Supports 3.3V and 5V LCD panel – 1 x RS-232/422/485 selectable port COM3 & COM4 supplies +5V &
– Optional LVDS-01 & LVDS-02 module for LVDS interface +12V DC
I/O
– 3 x RS-232 ports – 1 x parallel port (support SPP/EPP/ECP mode)
– 1 x RS-232/422/485 selectable port – 1 x IDE channel : 40-pin pin-header, supports PIO-4 mode
– 1 x parallel port (support SPP/EPP/ECP mode) – 1 x FDD port
I/O – 1 x IrDA WDT software programmable, support 1~ 255 seconds system reset
– 2 x USB Ports (USB 1.1 compliant)
SSD One DiskOnChip™ ocket
– 2 x IDE channel (1x40pin, 1x44pin) pin header
– 1 x FDD Expansion Slot One PC/104 expansion connector for add-on card
Ethernet Realtek RTL8100BL 10/100Mbps Ethernet chip with RJ-45 connector A non-volatile 1Kbit EEPROM is provided to retain application critical
E²Key™
read/write data
– Digital Input : 4 channels
Isolated Digital Power
– Digital output : 4 channels [email protected]
I/O Consumption
– Isolated channel with common power
Software programmable supports Operating
WDT 0~60ºC
1~ 255 seconds system reset Temperature
SSD One DiskOnChip socket Relative
5~95%, non-condensing
Expansion Slot One PC/104 expansion connector for add-on cards Humidity
A non-volatile 1Kbit EEPROM is provided to retain application critical GW 700g
E²Key
read/write data

Ordering Information
Power
Molex 26-60-4080
Connector
Power
[email protected] (Pentium® MMX 233MHz and 32MB SDRAM)
Consumption
Operating
NOVA-300-M4 : 5.25” 386SX-40 CPU Board with LCD/ CRT
0~60ºC (CPU cooler required) VGA (1MB), 4MB DRAM
Temperature
Relative
5~95%, non-condensing
Humidity
GW 700g
IEI Option
Ordering Information
NOVA-600-R2 : 5.25” Socket-7 CPU Board with LCD/ CRT
VGA (2MB), LAN, 4 COM, R2

IEI Option MB-3200W/ACE-855A

NOVA-600 compact chassis with ACE-855A power supply
NVCB-01 Cable kit for NOVA-600 SBC NVCB-03
NVCB-02 Power cable kit to ACE-855 series and HDD/FDD for Cable set for NOVA-300
NOVA-600 SBC page 3-28

1-71 w w w. i e i w o r l d . c o m
 ISS-102 5.25” GX1-300MHz CPU Board with three
Realtek LANs
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
CF-II
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
K/M PC/104
Add-on Card
3 x 10/100 Mbps IVC Card
VGA Ethernet Backplane
COM
DOC
LCD
Product
s s
Fanle
Series
Dimensions
Feature
Chassis
AMD Geode GX1-300 CPU for Fanless system support
CRT/LCD integrated in CS5503A, support 18-bit LCD
1x PC133 SDRAM SO-DIMM support up to 512MB
CFII, DOC, USB integrated Power
supply

Specifications
Peripheral
CPU AMD Geode GX1-300MHz
System Chipset AMD CS5530A
System
Supports up to 512MB (1 x 144pin SO-DIMM)
memory
BIOS Award PnP BIOS
– CS5530A chipset integrated
– V-RAM: share with system memory (up to 4MB) setting by
BIOS IEI Option
Display – Resolution: 1280 x 1024, 256 colors for CRT; 1024 x 768, 64K
color for LCD
– Connector: DB-15 for CRT, 18-bit 44-pin by pin-header for LCD EB-3800/3820
display 5.25” Drive Compatible Case for ISS-102
– 1 x RS-232 port
– 2 x USB 1.1
– 1 x Printer port
I/O
– 1 x IrDA
– 2 x IDE (2x40-pin by pin-header)
– 1 x FDD
Digital I/O TTL Level, 4 inputs and 4 outputs
3 x Intel 82559 or Realtek RTL8100B 10/100Mbps Chip on
Ethernet
board, supports WOL, AOL (Intel only) function EB-3800
Compact Flash Type II socket supports Flash Disk, IBM
SSD
MicroDrive + DiskOnChip socket
WDT Software programmable, support 1~ 255 sec. system reset
Power Control
support ATX power functions with power adapter
Function
Power 5V@2A, 12V@100mA (12v@100mA for LCD display only)
Consumption (with 64MB SDRAM) EB-3820
Operating
0-60°C
Temperature
Dimensions 192 x 139.98 (mm)
GW 718g
SPECIFICATIONS
Packing list Mounts directly in the 5.25” drive bay
IDE Flat Cable 32200-000005 X1 Power, Alarm, LAN and HDD LEDs
Floppy Cable 32200-000017 X1 One internal 2.5” HDD Drive Bay
EB-3800 power requirement 5V and 12VDC
Printer Cable 32200-000040 X1 Equipped with power adaptor [email protected] (EB-3820)
Serial Port Cable 32200-000015 X1 Optional A78 built-in 2 x 20 characters LCD display module
Connecting Cable 32100-047900 X1
CD Utility and driver --
ORDERING INFORMATION
User’s Manual / QIG --
EB-3800/XXXX
Ordering Information 5.25” Drive Compatible case for ISS-102
EB-3820/XXXX
ISS-102R-300-R2 5.25” Drive Compatible case for ISS-102 with Power adaptor
5.25” GX1-300MHz CPU Board with three Realtek 8100B LANs

w w w. i e i w o r l d . c o m 1-72
 EPIC Form Factor Introduction

E PIC – NANO is to define a new industry open standard for small form factor embedded
computer boards, called Embedded Platform for Industrial Computing™ or EPIC. Single
Board Computers with multiple I/O expansion options. Its size is midway between the industry
standard PC/104 module and EBX board. This size board will support advanced processors
plus complex I/O functions for applications involving data acquisition, video processing,
telecommunications, networking, motion control plus the associated field wiring termination, I/O
circuit protection, etc. The initial specification defines PC/104 expansion; however, future updates
will embrace PCI Express and/or other fabrics. The EPIC standard provides a platform on which
to build the next generation of feature-rich, embedded systems for industrial, medical, military,
transportation, and commercial applications.

PDF created with pdfFactory trial version www.pdffactory.com

PC/104 EPIC EBX

90mm x 96 mm 115mm x 165 mm 146mm x 203 mm
86.4 cm² 189.8 cm² 296.4 cm²

3.550 in x 3.775 in 4.528 in x 6.496 in 5.75 in x 8.0 in

13.4 in² 29.4 in² 46.0 in²

Dimension and Mounting Holes Size Comparison of PC/104 vs. EPIC vs. EBX

•Why need EPIC ?

Embedded global market is growing up
3.5” form factor is too small to feature more functionality
5.25” form factor has difficult management on I/O pin headers

•Who needs EPIC ?

Customers who require faster CPU and more I/O functions, especially for applications which do not allow larger EBX-size.

•Key Feature:
A board that is a small, industrial-grade, embedded SBC with the option of I/O expansion via PC/104, PC/104-Plus, USB, Ethernet, etc.
Mid-Size between the EBX and WAFER
A board that will emphasize I/O connector area
A board based upon open industry standards that could be administered by an independent technical standards body
A board that can bridge from current technology into the future. That means that it would be able to support PCI Express, Express Card, and
other technologies, as they become available and supported in the embedded systems domain.

•EPIC History
A new platform for embedded Single Board Computer with multiple I/O expansion options.
Defined by 5 leading SBC manufactures: Micro/sys, Octagon Systems, VersaLogic, WinSystems, Ampro Computers.
Specification released on March 23, 2004

•Benefit from NANO Board

Allow additional space to support advanced processors and technologies
Complex I/O functions based on customers’ requirements
Keep small form factor
Saving money and space from cables

1-73 w w w. i e i w o r l d . c o m
 NANO-7270 EPIC Intel Pentium M / Celeron M CPU
with LCD/CRT VGA, LAN, Audio
Single
Board
Long Term Supports Computer

SO-DIMM PIAGP Series

PICMG
Half-Size
Industrial
PC/104 Plus Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
COM Backplane
CRT
Ethernet
CF II LCD
USB 2.0
48 bit dual channel LVDS Product
K/M
Feature Series

Dual lay 12V Intel Pentium M / Celeron M CPU support up to FSB 400MHz

Disp only CRT/LCD VGA integrated in i852GM, support 48-bit LVDS for Chassis
independent dual display
1x DDR200/266 SO-DIMM support up to 1GB
Support PC/104+(PCI only) extension slot
Power
supply
Tech Talk
Specifications Peripheral
Intel® 852 Chipset Dual-Display Feature
CPU
Socket 479 base support Intel Pentium M CPU up to
400MHz FSB (NANO-7270G) Introduction
On board ULV Intel Celeron M 600MHz with 512KB L2
Cache (NANO-7270-600) Intel® 852 chipsets are integrated with high performance 2D/3D
System Chipset Intel 852GM + ICH4 graphic engine called Intel® Extreme Graphics 2. Intel® 852 has
System Memory 1x DDR200/266 SO-DIMM support up to 1GB two independent display pipelines which allow for users to operate
Display controller the system with up to two displays driven by the integrated graphics
Intel GMCH Integrated Graphics controller device. The displays can be driven in a few different configurations,
Integrated AGP 4X 2D/3D engine
which are detailed in the following sections.
One VGA port for CRT monitor 1600X1200@8bpp;
Display
1280X1024@16bpp
48-bit LVDS port 1. Independent Mode
Dual independent displays This mode is used to drive multiple displays with the different content.
Shared system memory up to 32MB (DVMT) Each display device can be configured independently, allowing each
Intel 82541ER for 10/100/1000Mbs Ethernet or to have a different refresh rates for optimum display on each device.
Ethernet
Intel 82551ER for 10/100Mbs Ethernet Independent mode is beneficial when using displays of various types,
SSD 1x Compact Flash™ Type II Socket such as one pipe driving a Digital display while the other drives an
1 x IDE port
analog overhead projector that may only support specific refresh
1 x Parallel port
rates.
1 x PS2 Keyboard/Mouse support
3 x RS-232 Serial port
I/O 1 x RS-232/422/485 port 2. Mirror Mode
2 x SATA port This mode is driven by a single pipe, which only allows same content,
6 x USB 2.0 port (4 by connector) color depth, resolution, and refresh rate.
1 x PS/2 for Keyboard/Mouse
1 x IrDA by pin header (SIR mode)
Audio AC’97 CODEC
Digital I/O
WDT
4 inputs / 4 outputs
Software programmable support 1 ~ 255 sec system reset Dimensions
Expansion slot 1x PC/104 + (PCI interface)
Hardware Monitoring CPU voltage / Temperature / FAN speed monitor
Power control Meets ACPI 1.1 specification
function Single voltage +12V only
Operation
0 ~ 60 °C
Temperature
Relative Humidity 5 ~95%, non-condensing

Ordering Information
NANO-7270G-R10
EPIC Socket 479 Intel Pentium M 533MHz FSB with LCD/CRT
VGA, GbE, USB2.0, Audio
NANO-7270-600-R10
EPIC on board ULV Intel Celeron M CPU with LCD/CRT VGA,
LAN, USB2.0, Audio

w w w. i e i w o r l d . c o m 1-74
 NANO-7240 EPIC Onboard ULV Intel Celeron 400MHz CPU
based with LCD/CRT VGA, LAN, Audio

Prescott Ready
Coming
Soon Long Term Supports

SO-DIMM

COM
VGA
Ethernet

36 bit LVDS I/F USB

K/M
CF II
Feature
Embedded ULV Intel Celeron 400 MHz CPU for Fanless system
support
CRT/LCD VGA integrated in VT8606, support 36-bit LVDS/TTL LCD
1x PC133 SDRAM SO-DIMM support up to 512MB
Support PC/104+(ISA+PCI) expansion slot
12V ss
Fanle
CFII, LAN, USB, Multi-COM, Audio integrated
only
Tech Talk
ULV Intel Celeron CPU Product List
Specifications Model Name Chipset Form Factor
ROCKY-C400 series VIA 8601T Full size PICMG Bus SBC
CPU ULV Intel Celeron 400 MHz CPU PCISA-C400 series VIA 8601T Half size PCISA Bus SBC
System Chipset VIA VT8606 + VT82C686B JUKI-C400 VIA 8606T Half size PCISA Bus SBC
System Memory 1x PC133 SO-DIMM support up to 512MB SDRAM NOVA-C400 VIA 8606T 5.25” Embedded Board
WAFER-C400 VIA 8601T 3.5” Embedded Board
ETX-C400 VIA 8606T ETX CPU Module
Display controller
VIA VT8606 on chip ProSavage TM VGA controller NANO-7240 VIA 8606T EPIC Embedded Board
Bus: AGP 4X ICPMB-2660 VIA CLE266 ATX Motherboard
Display
One VGA port for CRT monitor 1920x1400
36-bit LVDS/TTL LCD interface
Shared system memory up to 32 MB (SMA technology)
Dimensions
Ethernet Realtek 8100BL 10/100 Mbs Ethernet
SSD 1x Compact Flash™ Type II Socket

1 x IDE port
1 x Parallel port
1 x PS2 Keyboard/Mouse support
3 x RS-232 Serial port
I/O
1 x RS-232/422/485 port
4 x USB 1.1 port (4 by connector,)
1 x PS/2 for Keyboard/Mouse
1 x IrDA by pin header (SIR mode)

Audio AC’97 CODEC

Digital I/O 4 inputs / 4 outputs TTL lever
WDT Software programmable support 1 ~ 255 sec system reset
Expansion slot PC/104 and PC/104+
Hardware
Monitoring
CPU voltage / Temperature / FAN speed monitor Ordering Information
Power control Meets ACPI 1.1 specification NANO-7240-400-R10
function Single voltage +12V only EPIC On board ULV Intel Celeron 400MHz with LCD/CRT VGA,
Operation LAN, Audio
0 ~ 60 °C
Temperature Note:
Relative For ULV Intel Celeron 650 MHz / LV P III 800MHz CPU support,
5 ~95%, non-condensing please contact supplier.
Humidity

1-75 w w w. i e i w o r l d . c o m
 3.5” WAFER Embedded Board Selection Guide
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
WAFER-C800EV-1G ETX
Model Name WAFER-6820-800-733 WAFER-C400E2V WAFER-E669E2V PC/104
WAFER-E667EV-733
Add-on Card
Transmeta Crusoe TM5800 VIA C3 1GHz IVC Card
CPU ULV Intel Celeron 400MHz VIA EDEN 400MHz
733MHz/800MHz VIA EDEN 733MHz Backplane

Chipset VIA VT82C686B (South Bridge) VIA VT8601T + VT82C686B VIA VT8606 + VT8231 VIA VT8601T + VT82C686B
LCD
Product
Equipped with 128MB and Series
1 x SO-DIMM socket upto 1 x SO-DIMM socket upto 1 x SO-DIMM socket upto
Memory 1 x SO-DIMM socket upto Max.
512MB SDRAM 512MB SDRAM 512MB SDRAM
512MB SDRAM
Chassis
CHIPS 69000
Integrated VT8601T Integrated VT8606 Integrated VT8601T
2MB V-RAM
Graphic 50-pin 24-bit LCD I/F 50-pin 36-bit LCD I/F 50-pin 24-bit LCD I/F
50-pin for LCD I/F
DB-15 VGA DB-15 VGA DB-15 VGA Power
DB-15 VGA
supply

Ethernet One 10 / 100 Mbps Ethernet Dual 10/100 Mbps Ethernet One 10/100 Mbps Ethernet Dual 10/100 Mbps Ethernet Peripheral

1 x IDE ATA-66/33 1 x IDE ATA-100/66/33 2 x IDE ATA-100/66/33 1 x IDE ATA-100/66/33

Drive Interface
1 x FDD 1 x FDD 1 x FDD 1 x FDD

1 x RS-232 1 x RS-232 1 x RS-232

1 x RS-232/422/485
1 x RS-232/422/465 1 x RS-232/422/485 1 x RS-232/422/465
1 x PS/2 KB/MS
1 x PS/2 KB/MS 1 x PS/2 KB/MS 1 x PS/2 KB/MS
I/O Interface 1 x LPT(SPP/EPP/ECP)
1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP) 1 x LPT(SPP/EPP/ECP)
2 x USB 1.1
2 x USB 1.1 2 x USB 2.0 2 x USB 2.0
1 x IrDA
1 x IrDA 1 x IrDA 1 x IrDA

Audio AC’97 CODEC AC’97 CODEC AC’97 CODEC AC’97 CODEC

SSD CF Type II CF Type II N/A CF Type II

Power [email protected] +5V@3A [email protected], [email protected] +12V@40mA, +5V@3A

Consumption (128MB SDRAM) [email protected] (512MB SDRAM) (128MB SDRAM)

Watchdog Timer Software Programmable 1-255 sec system reset

Hardware Monitor CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function

Operation Temperation Range 0 ~ 60ºC

Environment Relative Humidity 5 ~ 95 %, non-condensing

Expansion slot 1 x PC/104 1 x PC/104 1 x PCMCIA type-II socket 1 x PC/104

w w w. i e i w o r l d . c o m 1-76
 3.5” WAFER Embedded Board Selection Guide

Model Name WAFER-5823R WAFER-5822 WAFER-5820 WAFER-4826EV-32M WAFER-4823 WAFER-4821

CPU AMD Geode GX1-300MHz STPC ATLAS 5x86 Maple 486DX4-100 Maple 486DX4-

AMD Geode GX1 + AMD Geode GX1 + AMD Geode GX1 +

Chipset STPC ATLAS ACC Maple ACC Maple
CS5530A CS5530A CS5530A

On board 32MB 1 x SIMM upto 32MB

144-pin SO-DIMM 144-pin SO-DIMM 144-pin SO-DIMM
144-pin SO-DIMM 1 x SIMM upto 32MB EDO RAM
Memory socket upto 512MB socket upto 512MB socket upto 512MB
socket upto 128MB EDO RAM or 4MB RAM on-
SDRAM SDRAM SDRAM
SDRAM board

CS5530A integrated HM86508, 1MB RAM

CS5530A integrated CS5530A integrated Chipset integrated
44-pin LCD I/F 44-pin LCD I/F
Graphic 44-pin LCD I/F 44/20-pin LCD I/F 50-pin LCD I/F N/A
DB-15 VGA DB-15 VGA
DB-15 VGA DB-15 VGA DB-15 VGA
TV output (WAFER-4823)

Dual 10/100 Mbps

Ethernet One 10/100 Mbps Ethernet One 10Mbps Ethernet
Ethernet

1 x IDE ATA-33 1 x IDE ATA-33 1 x IDE ATA-33 1 x IDE ATA-33 1 x IDE ATA-33 1 x IDE ATA-33
Drive Interface
1 x FDD 1 x FDD 1 x FDD 1 x FDD 1 x FDD 1 x FDD

3 x RS-232
2 x RS-232 1 x RS-232/422/485
1 x RS-232/422/485 1 x RS-232/422/485 1 x RS-232/422/485
2 x RS-232 1 x PS/2 KB/MS 1 x RS-232
1 x PS/2 KB/MS 1 x RS-232 3 x RS-232
1 x PS/2 KB/MS 1 x LPT(SPP/EPP/ 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ 1 x PS/2 KB/MS 1 x PS/2 KB/MS
1 x LPT(SPP/EPP/ ECP) 1 x LPT(SPP/EPP/
I/O Interface ECP) 1 x LPT(SPP/EPP/ 1 x LPT(SPP/EPP/
ECP) 2 x USB 1.1 ECP)
2 x USB 1.1 ECP) ECP)
2 x USB 1.1 1 x IrDA 2 x USB 1.1
1 x IrDA 4xDI 4xDI
1 x IrDA 4xDI 1 x IrDA
4xDI 4xDO 4xDO
4xDO
4xDO

Audio N/A AC’97 CODEC AC’97 CODEC N/A N/A N/A

SSD CF Type II DiskOnChip DiskOnChip CF Type II DiskOnChip DiskOnChip

[email protected],
Power [email protected], +5V@2A [email protected], +5V@2A [email protected] [email protected] [email protected]
+5V@2A, (64MB
Consumption (64MB SDRAM) (64MB SDRAM) (32MB SDRAM) (32MB EDO RAM) (32MB EDO RAM)
SDRAM)

Watchdog
Software Programmable 1-255 sec system reset
Timer

Hardware
CPU Vcore, Vcc, CPU/System fan speed and temperature detecting function
Monitor

Operation Temperation Range 0 ~ 60 ºC

Environment Relative Humidity 5 ~ 95 %, non-condensing

Expansion slot 1 x PC/104 1 x PC/104 1 x PC/104 1 x PC/104 1 x PC/104 1 x PC/104

1-77 w w w. i e i w o r l d . c o m
 WAFER-6820 3.5” TM5800/733MHz CPU Board with 128MB
SDRAM, LCD/ CRT VGA, LAN & Audio
Single
VIA VT82C686B Transmeta Crusoe 5800
Dimensions Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product

COM 10/100 Mpbs K/M VGA

Customized-I/O solution for compact size Series
Ethernet and flexible!!
s s
Fanle Chassis
Rear Side

Feature CF Type II Socket Power

supply
Embedded Transmeta Cursoe CPU support up to 800MHz
CRT/LCD integrated in Asilliant 69000, support 36-bit TTL LCD
1x PC133 SDRAM SO-DIMM support up to 512MB Peripheral
Support PC/104 expansion slot
CFII, LAN, USB, Audio integrated Wall mount kits

Specifications EBC-1000
Industrial 3.5”Embedded Chassis
CPU Transmeta Crusoe Processor Model TM5800 733MHz/800MHz
South Bridge
VT82C686B
Chipset
System
One 144-pin SO-DIMM Socket (128MB SDRAM Attached)
Memory
– 69000 LCD/CRT VGA
– BUS: PCI
– V-RAM: 2MB RAM on CHIP BK-6820 for WAFER-6820
Display
– Resolution: 1280X1024 (256 colors) for CRT display
– Connector: DB-15 for CRT display
50-pin pin-header for 36-bit LCD panel Specifications
Realtek RTL8100B 10/100Mbps Ethernet chip with RJ-45
Ethernet Designed to Wall-mount application
connector
SSD One Compact Flash Type II socket (rear side) Designed to IEI 3.5”WAFER series SBC
WDT Software programmable, support 1~ 255 sec. system reset Drive Bays: One 2.5” Internal HDD Drive Bay
– 1 x RS-232 port Standard equipped with Power Supply
– 1 x RS-232/422/485 selectable port ACE-890A 90W AC Input AT Power Suupply
– 1 x Parallel port (support SPP/EPP/ECP mode) Optional Power Supply:
– 2 x USB 1.1 (pin header) ACE-890AP AC Input AT Power Supply with PFC Function
I/O
– 1 x IrDA port ACE-890V 12V DC Input AT Power Supply
– 1 x FDD port
ACE-890C 24V DC Input AT Power Supply
– 1 x ATA-66 IDE channel (44-pin header)
(optional 44 to 40 connector) CB-HD32
ACE-890T 48V DC Input AT Power Supply
Audio AC’97 compliant Audio CODEC ACE-890P 100V DC Input AT Power Supply
Expansion One PC/104 expansion connector for add-on modules Operating temperature: 0~50ºC
Power Vibration: 5~17Hz, 0.1”double amplitude displacement
[email protected] (with 128MB SDRAM)
Consumption 17~640 Hz,1.5G acceleration peak to peak
Operating Shock: 10G acceleration peak to peak (11ms)
0~60ºC
Temperature Color: Dark Blue (PANTONE 433C)
Relative Dimension: 172mm(W)x 116mm(H)x 129mm(D)
5~95%, non-condensing
Humidity
GW 700g

Ordering Information Ordering Information

WAFER-6820-733-R3/SDM-128SD-100-A EBC-1000/ACE-890A
3.5” TM5800/733MHz CPU Board with 128MB SDRAM, LCD/ Industrial 3.5” Embedded Chassis with 90W AT Power supply
CRT VGA, LAN & Audio, R3 Without I/O Bracket
WAFER-6820-800-R33/SDM-128SD-100-A BK-6820
3.5” TM5800/800MHz CPU Board with 128MB SDRAM, LCD/ WAFER-6820 I/O Bracket and Cable set
CRT VGA, LAN & Audio, R33

w w w. i e i w o r l d . c o m 1-78
 WAFER-C400 3.5” Intel ULV 400MHz CPU Board with LCD/ CRT
VGA, Dual LAN, USB 2.0 & Audio

50-Pin TTL LCD Interface

Feature
Embedded ULV Intel Celeron 400 MHz CPU for Fanless
system support
CRT/LCD integrated in VT8601, support 24-bit TTL LCD
1x PC133 SDRAM SO-DIMM support up to 512MB
Support PC/104 extension slot
CFII, Dual LAN, USB2.0, Audio integrated

Dimensions

COM VGA
Dual 10/100 USB 2.0
Mpbs Ethernet
Rear Side

ss
Fanle Customized-I/O solution for compact size
and flexible!!
Specifications
CPU Embedded Ultra Low Voltage Intel® Celeron 400MHz EBC-1000
System Industrial 3.5”Embedded
VIA VT8601T + VT82C686B
chipset Chassis
System
1 x 144-pin SO-DIMM socket up to 512MB
Memory
– VT8601T Chipset Integrated
– AGP 4X bus Wall mount kits
Display – Resolution support up to 1600x1200 for CRT with DB-15
connector
– 24-bit TTL LCD interface with 50-pin header
2 x on-board 10 / 100Mbps Intel 82551 / RTL8100B fast Ethernet
Ethernet
controller
SSD 1x onboard Compact Flash™ Type II socket
– 1 x RS-232 / 422 / 485 selectable
– 1 x RS-232 BK-5823 for WAFER-5823/E669EV2/C400
– 1 x LPT parallel port by pin-header (Supports SPP/EPP/ECP
mode)
I/O – 1 x IrDA (SIR mode) Specifications
– 2 x USB 2.0
– 1 x ATA / 100 IDE channel Designed to Wall-mount application
– 1 x PS/2 for Keyboard/Mouse Designed to IEI 3.5”WAFER series SBC
– 1 x FDD connector, support 1.44 / 2.88 and 3-mode floppy drive Drive Bays: One 2.5” Internal HDD Drive Bay
Audio AC’97 compliant Audio CODEC Standard equipped with Power Supply
WDT Software programmable supports 1~255 seconds system reset
Expansion ACE-890A 90W AC Input AT Power Suupply
One PC/104 expansion connector for add-on modules Optional Power Supply:
Slot
Power ACE-890AP AC Input AT Power Supply with PFC Function
+5V@3A, +12V@100mA (256MB SDRAM)
Consumption ACE-890V 12V DC Input AT Power Supply
Operating ACE-890C 24V DC Input AT Power Supply
0 ~ 60ºC
Temperature ACE-890T 48V DC Input AT Power Supply
Relative
5 ~ 95 %, non-condensing ACE-890P 100V DC Input AT Power Supply
Humidity
GW 700g Operating temperature: 0~50ºC
Vibration: 5~17Hz, 0.1”double amplitude displacement
Ordering Information 17~640 Hz,1.5G acceleration peak to peak
Shock: 10G acceleration peak to peak (11ms)
Color: Dark Blue (PANTONE 433C)
WAFER-C400E2VN-R10
Dimension: 172mm(W)x 116mm(H)x 129mm(D)
3.5” Intel ULV 400MHz CPU Board with LCD/ CRT VGA, Dual
Intel LAN, USB 2.0 & Audio
WAFER-C400E2VR-R10 Ordering Information
3.5” Intel ULV 400MHz CPU Board with LCD/ CRT VGA, Dual
EBC-1000/ACE-890A
Realtek LAN, USB 2.0 & Audio
Industrial 3.5” Embedded Chassis with 90W AT Power supply
Without I/O Bracket
Note: For ULV Intel Celeron 650MHz/P3-M 800MHz CPU supports,
please cotact supplier BK-5823 WAFER-5823/E669/C400 I/O Bracket and Cable set

1-79 w w w. i e i w o r l d . c o m
 WAFER-C800EV/E667EV 3.5” VIA C3 / EDEN CPU Board with
LCD/ CRT VGA, LAN, PCMCIA & Audio

Feature Single
Board
Dimensions
Embedded VIA C3/Eden CPU for Fanless system support Computer
CRT/LCD integrated in VT8606, support 36-bit TTL LCD
PIAGP Series
1x PC133 SDRAM SO-DIMM support up to 512MB
PICMG
Support PCMCIA type II socket
Half-Size
LAN, USB, Audio integrated
Industrial
Motherboard
5.25” NOVA
Dimensions EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Rear Side Product
Series
COM 10/100 Mpbs USB K/M VGA
Ethernet
Chassis

Power
PCMCIA Slot supply

Specifications Customized-I/O solution for compact size

Embedded VIA C3 1GHz (WAFER-C800EV-1G)
and flexible!! Peripheral
CPU
EDEN 733MHz CPU (WAFER-E667EV-733)
System
VIA VT8606 + VT8231
Chipset
System
One 144-pin SODIMM socket up to 512MB SDRAM
Memory EBC-1000
128-bit Single Cycle 2D/3D Graphics Engine (VIA VT8606) Industrial 3.5”Embedded
– AGP 4X bus bandwidth up to 1066 MB/sec Chassis
– V-RAM: shared with system memory
Display
– Resolution: up to 1920 x 1440
– Integrated 32-bit True Color DAC
– Connector: DB-15 Wall mount kits
– 36-bit DSTN/TFT flat panel for TTL interface supports 256
LCD Interface shades of gray
– Connector: 50 pin-header
1 x 10/100Mbps Fast Ethernet (VIA 8231 Chipset integrated +
Ethernet
VT6103 PHY)
– 1 x RS232 BK-C800 for WAFER-C800EV/E667EV
– 1 x RS232/422/485
– 1 x LPT
– 2 x USB 1.1
Specifications
I/O
– 1 x PS/2 Designed to Wall-mount application
– 1 x IrDA
Designed to IEI 3.5”WAFER series SBC
– 2 x ATA-100 IDE channel, supports CD-ROM; ZIP and LS-120
bootable Drive Bays: One 2.5” Internal HDD Drive Bay
Audio AC’ 97 Codec Standard equipped with Power Supply
Expansion ACE-890A 90W AC Input AT Power Suupply
1 x PCMCIA type II socket Optional Power Supply:
Slot
Power Supply ACE-890AP AC Input AT Power Supply with PFC Function
4-pin power housing (5V only, 5.25” Drive Connector)
Input ACE-890V 12V DC Input AT Power Supply
– WAFER-C800EV: 12V@170mA; [email protected] ACE-890C 24V DC Input AT Power Supply
Power
– WAFER-E667EV: 12V@50mA; [email protected] ACE-890T 48V DC Input AT Power Supply
Consumption
(with 512MB SDRAM Windows 2000)
ACE-890P 100V DC Input AT Power Supply
Operation
0~60ºC Operating temperature: 0~50ºC
Temperature
Vibration: 5~17Hz, 0.1”double amplitude displacement
Relative
5~95%, non-condensing 17~640 Hz,1.5G acceleration peak to peak
Humidity
Shock: 10G acceleration peak to peak (11ms)
Color: Dark Blue (PANTONE 433C)
Ordering Information Dimension: 172mm(W)x 116mm(H)x 129mm(D)

WAFER-C800EV-1G Ordering Information

3.5” VIA C3 1GHz CPU Board with LCD/ CRT VGA, LAN,
PCMCIA & Audio EBC-1000/ACE-890A
WAFER-E667EV-733 Industrial 3.5” Embedded Chassis with 90W AT Power supply
3.5” VIA EDEN 733MHz CPU Board with LCD/ CRT VGA, LAN, Without I/O Bracket
PCMCIA & Audio BK-C800 WAFER-C800/E667 I/O Bracket and Cable set

w w w. i e i w o r l d . c o m 1-80
 WAFER-E669 3.5” VIA EDEN 400MHz CPU Board with LCD/
CRT VGA, Dual LAN, USB 2.0 & Audio

Feature
Embedded VIA C3/Eden CPU for Fanless system support
CRT/LCD integrated in VT8601, support 24-bit TTL LCD
1x PC133 SDRAM SO-DIMM support up to 512MB
LAN, USB, Audio integrated

Dimensions

COM VGA USB 2.0

Dual 10/100 Mpbs Ethernet

Rear Side

Customized-I/O solution for compact size

and flexible!!
ss
Fanle
CF II

Specifications EBC-1000
Industrial 3.5”Embedded
CPU Embedded VIA Eden 400MHz CPU Chassis
System Chipset VIA 8601T + VT82C686B
– VT8601T Chipset Integrated
– AGP 4X bus
Display – Resolution support up to 1600x1200 for CRT with DB-15 Wall mount kits
connector
– 24-bit TTL LCD interface with 50-pin header
2 × 10/100Mbps Fast Ethernet
Ethernet
(Realtek8100B / Intel 82551)
SSD CompactFlash™ Type II socket
1 × RS232
1 × RS232/422/485 BK-5823 for WAFER-5823/E669EV2
2 × USB2.0
I/O
1 × FDD
1 × IDE ATA-100
Specifications
1 × LPT Designed to Wall-mount application
1 × IrDA Designed to IEI 3.5”WAFER series SBC
1 × PS/2 for Keyboard/Mouse Drive Bays: One 2.5” Internal HDD Drive Bay
Audio AC’97 Codec Standard equipped with Power Supply
Expansion Slot 1 × PC/104 ACE-890A 90W AC Input AT Power Suupply
Digital I/O 4 x input and 4 x output TTL level Optional Power Supply:
E2Key Support ACE-890AP AC Input AT Power Supply with PFC Function
WDT Software programmable 1~255 sec ACE-890V 12V DC Input AT Power Supply
Power 12V@40mA; 5V @3A ACE-890C 24V DC Input AT Power Supply
Consumption (128MB SDRAM) ACE-890T 48V DC Input AT Power Supply
Operation ACE-890P 100V DC Input AT Power Supply
0~60ºC
Temperature Operating temperature: 0~50ºC
Relative Humidity 5~95%, non-condensing Vibration: 5~17Hz, 0.1”double amplitude displacement
GW 700g 17~640 Hz,1.5G acceleration peak to peak
Shock: 10G acceleration peak to peak (11ms)
Color: Dark Blue (PANTONE 433C)
Ordering Information Dimension: 172mm(W)x 116mm(H)x 129mm(D)

WAFER-E669E2VR-400 Ordering Information

3.5” VIA EDEN 400MHz CPU Board with LCD/ CRT VGA, Dual
Realtek LAN, USB 2.0 & Audio EBC-1000/ACE-890A
WAFER-E669E2VN-400 Industrial 3.5” Embedded Chassis with 90W AT Power supply
3.5” VIA EDEN 400MHz CPU Board with LCD/ CRT VGA, Dual Without I/O Bracket
Intel LAN, USB 2.0 & Audio BK-5823 WAFER-5823/E669/C400 I/O Bracket and Cable set

1-81 w w w. i e i w o r l d . c o m
WAFER-5820/5822 3.5” GX1-300 MHz CPU Board with LCD/CRT VGA,
LAN, TV out & Audio

Single
WAFER-5820 Feature Board
Computer
Embedded AMD Geode GX1-300 CPU for Fanless system support
CRT/LCD integrated in CS5530A, support 18-bit TFT LCD, LVDS PIAGP Series
(5820), TV-Out(5822) PICMG
1x PC133 SDRAM SO-DIMM support up to 512MB Half-Size
Support PC/104 extension slot Industrial
DOC, LAN, USB, Audio integrated Motherboard
5.25” NOVA
Dimensions EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
Gx1 IVC Card
Backplane

LCD
COM 10/100 Mpbs K/M VGA Product
Ethernet Series

Chassis
z
300MH Rear Side
NO W
Customized-I/O solution for compact size and
Power
supply
s s
Fanle SO-DIMM Socket
flexible!!
Peripheral
Specifications
CPU Embedded AMD Geode GX1 300MHz
System
AMD Geode GX1 + CS5530A EBC-1000
Chipset Industrial 3.5”Embedded
System Chassis
One 144-pin SO-DIMM socket supports up to 512MB SDRAM
Memory
– Built-in CS5530A chipset, supports TFT LCD & CRT display
– V-RAM : Share with system memory (up to 4MB), setting in
BIOS Wall mount kits
– Resolution :1280 x 1024 (256 colors)
Display
– Connector :DB-15 for CRT display
44-pin pin-header for TFT LCD
20-pin pin-header for LCD LVDS interface(WAFER-5820)
TV Out (Both NTSC & PAL) (WAFER-5822)
Ethernet Realtek RTL8100BL 10/100Mbps Ethernet controller BK-5820 for WAFER-5820/5822
SSD One DiskOnChip socket
WDT Software programmable, support 1~ 255 sec. system reset
– 1 x RS-232 port & 1 x RS-232/422/485 selectable port Specifications
(WAFER-5820)
– 2 x RS-232 ports (WAFER-5822) Designed to Wall-mount application
– 1 x parallel port (support SPP/EPP/ECP mode) Designed to IEI 3.5”WAFER series SBC
I/O
– 2 x USB 1.1 (by pin-header) Drive Bays: One 2.5” Internal HDD Drive Bay
– 1 x IrDA port
Standard equipped with Power Supply
– 1 x FDD port
– 1 x ATA-33 IDE channel (44-pin by pin-header)
ACE-890A 90W AC Input AT Power Suupply
Audio AC’97 compliant Audio CODEC Optional Power Supply:
Digital I/O 4 x input and 4 x output, TTL Level (WAFER-5822) ACE-890AP AC Input AT Power Supply with PFC Function
Expansion One PC/104 expansion connector for add-on modules ACE-890V 12V DC Input AT Power Supply
Power +5V@2A, +12V@100mA (32MB SDRAM), WAFER-5820-300-R3 ACE-890C 24V DC Input AT Power Supply
Consumption (+5V only) ACE-890T 48V DC Input AT Power Supply
Operating ACE-890P 100V DC Input AT Power Supply
0~60°C
Temperature Operating temperature: 0~50ºC
Relative Vibration: 5~17Hz, 0.1”double amplitude displacement
5~95%, non-condensing
Humidity 17~640 Hz,1.5G acceleration peak to peak
GW 700g Shock: 10G acceleration peak to peak (11ms)
Color: Dark Blue (PANTONE 433C)
Ordering Information Dimension: 172mm(W)x 116mm(H)x 129mm(D)

WAFER-5820-300-R3 Ordering Information

3.5” GX1-300MHz CPU Board with LCD/ CRT VGA, LAN & Audio, R3
EBC-1000/ACE-890A
WAFER-5822-300-R3 Industrial 3.5” Embedded Chassis with 90W AT Power supply
3.5” GX1-300MHz CPU Board with LCD/ CRT VGA, LAN, TV Out & Audio, R3 Without I/O Bracket
BK-5820 WAFER-5820/5822/ I/O Bracket and Cable set

w w w. i e i w o r l d . c o m 1-82
 WAFER-5823 3.5” GX1-300 Embedded Board with
Dual LAN and LCD/CRT VGA

Feature
Embedded AMD Geode GX1-300 CPU for Fanless system support
CRT/LCD integrated CS5530A, support 18-bit TFT LCD
1x PC133 SDRAM SO-DIMM support up to 512MB
Support PC/104 extension slot
CFII, Dual LAN, USB, Audio

Dimensions

USB
COM CRT Dual 10/100 Mpbs Ethernet

Rear Side

WAFER-5823 ATX
PowerCable Kit
32100-052100

Customized-I/O solution for compact size

ss
Fanle and flexible!!
CF II

Specifications
CPU AMD Geode GX1-300MHz
System Memory Supports up to 512MB SO-DIMM EBC-1000
Industrial 3.5”Embedded
– Built-in CS5530A chipset
Chassis
– V-RAM: share with system memory (up to 4MB) setting by BIOS
– Resolution:
Display
– 1280 x 1024, 256 colors for CRT; 1024 x 768, 64K color for LCD
– Connector:External DB-15 for CRT and one internal 18-bit 44pin pin Wall mount kits
header for LCD
Dual Intel 82559 or Realtek RTL8100B
Ethernet
10/100 Ethernet controllers supports WOL, AOL (Intel only) function
SSD CompactFlash TypeII socket support Flash Disk, IBM MicroDrive
– 2 x RS-232 (16C550 UARTs compatible)
– 1 x Parallel (SPP/EPP/ECP) BK-5823 for WAFER-5823/E669EV2
– 2 x USB 1.1
I/O
– 1 x IrDA (SIR)
– 1 x FDD Specifications
– 1 x IDE channel (1 x 44-pin header)
PC/104 one for PC/104 add-on modules Designed to Wall-mount application
Designed to IEI 3.5”WAFER series SBC
WDT Software programmable, supports 1~255 sec. system reset
Drive Bays: One 2.5” Internal HDD Drive Bay
Power Control Standard equipped with Power Supply
supports ATX power functions
Function ACE-890A 90W AC Input AT Power Suupply
Optional Power Supply:
Power 5V@2A ACE-890AP AC Input AT Power Supply with PFC Function
Consumption (with 64MB SRAM)
ACE-890V 12V DC Input AT Power Supply
Operating ACE-890C 24V DC Input AT Power Supply
0-60°C
Temperature ACE-890T 48V DC Input AT Power Supply
Relative ACE-890P 100V DC Input AT Power Supply
5~95%, non-condensing
Humidity Operating temperature: 0~50ºC
Dimensions 145 x 102 mm (5.7” x 4”) Vibration: 5~17Hz, 0.1”double amplitude displacement
GW 700g
17~640 Hz,1.5G acceleration peak to peak
Shock: 10G acceleration peak to peak (11ms)
Ordering Information Color: Dark Blue (PANTONE 433C)
Dimension: 172mm(W)x 116mm(H)x 129mm(D)

WAFER-5823R-300-R2
Ordering Information
3.5” GX1-300MHz CPU Board with LCD/ CRT VGA, Dual Realtek EBC-1000/ACE-890A
8100BL LAN, R2 Industrial 3.5” Embedded Chassis with 90W AT Power supply
Without I/O Bracket
BK-5823 WAFER-5823/E669/C400 I/O Bracket and Cable set

1-83 w w w. i e i w o r l d . c o m
 WAFER-4826 3.5” STPC Atlas 133MHz CPU Board with 32MB
DRAM, LCD/ CRT VGA, LAN

Single
Feature Board
Computer
Embedded STPC ATLAS CPU for Fanless system support
CRT/LCD display integrated in STPC PIAGP Series
1x PC133 SDRAM SO-DIMM up to 128MB, on board Memory PICMG
32M support Half-Size
Support PC/104 extension slot Industrial
CFII, LAN, USB, Multi-COM integrated Motherboard
5.25” NOVA
EPIC NANO
Dimensions 3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
K/M Product
COM VGA Series
Dual 10/100 Mpbs Ethernet

Rear Side Chassis

Power
Compact Flash™ II
supply

Customized-I/O solution for compact size and

ss on boa
rd +5V flexible!!
Fanle
Peripheral
y
Memor Only

Specifications EBC-1000
Industrial 3.5”Embedded Chassis
CPU Embedded STPC ATLAS 5x86 133MHz FSB base CPU
System On board 32MB with 1 x SO-DIMM Socket support up to 128MB
Memory SDRAM
Chipset integrated Wall mount kits
Display – 1 x DB-15 for VGA display
– 1 x 50-pin header for LCD connector (optional)
SSD 1 x Compact Flash™ Type II socket
Ethernet 1 x 10/100Mbps Realtek 8100BL Ethernet LAN Controller
– 3 x RS-232 by pin header
– 1 x RS-232/422/485
– 1 x LPT by pin header (supports SPP/EPP/ECP mode) BK-5821 for WAFER-4821/4823/4826
– 2 x USB 1.1
I/O
– 1 x PS/2 for Keyboard/Mouse
– 1 x IDE by pin header (44-pin with 2.0mm pitch) Specifications
– 1 x Floppy by pin header (26-pin with 2.0mm pitch)
Designed to Wall-mount application
– 1 x IrDA
Designed to IEI 3.5”WAFER series SBC
WDT Software programmable supports 1 ~ 255 sec, system reset
Drive Bays: One 2.5” Internal HDD Drive Bay
E²Key™ Support
Digital I/O TTL Level 4 input & 4 output
Standard equipped with Power Supply
Expansion ACE-890A 90W AC Input AT Power Suupply
One PC/104 expansion connector for add-on modules Optional Power Supply:
Slot
Power Supply ACE-890AP AC Input AT Power Supply with PFC Function
4-pin power housing (5V only, 5.25” Drive Connector) ACE-890V 12V DC Input AT Power Supply
Input
Power ACE-890C 24V DC Input AT Power Supply
[email protected](STPC Atlas with on board 32MB SDRAM)
Consumption ACE-890T 48V DC Input AT Power Supply
Operation ACE-890P 100V DC Input AT Power Supply
0~60°C
Temperature Operating temperature: 0~50ºC
Relative Vibration: 5~17Hz, 0.1”double amplitude displacement
5~95%, non-condensing
Humidity 17~640 Hz,1.5G acceleration peak to peak
GW 700g Shock: 10G acceleration peak to peak (11ms)
Color: Dark Blue (PANTONE 433C)
Dimension: 172mm(W)x 116mm(H)x 129mm(D)
Ordering Information
WAFER-4826EV-32M Ordering Information
3.5” STPC Atlas 133MHz CPU Board with 32MB DRAM, LCD/ EBC-1000/ACE-890A
CRT VGA, LAN Industrial 3.5” Embedded Chassis with 90W AT Power supply
Without I/O Bracket
Note: BK-4821
LCD display support please contact supplier WAFER-4821/4823/4826 I/O Bracket and Cable set

w w w. i e i w o r l d . c o m 1-84
 WAFER-4821/4823 3.5” 486DX4-100 CPU Board

WAFER-4821 WAFER-4823

COM K/M VGA COM

Dual 10/100 K/M VGA
Mpbs Ethernet +5V Dual 10/100 Mpbs

s s 4 COM Only Ethernet

Fanle
RT
Specifications LCD/Cy
Dis pla
CPU 486DX4-100 CPU on board, embedded in ACC Maple chipset Feature
System CRT/LCD display integrated in HM86508(WAFER-4823)
ACC Maple
Chipset 1x SIMM socket up to 32MB EDO RAM, onboard 4MB (4821)
– WAFER-4821:One 72-pin SIMM socket up to 32MB EDO RAM Support PC/104 expansion slot
System
or 4MB EDO RAM on board for OEM requirement DOC, LAN, Multi-COM (4821) integrated
Memory
– WAFER-4823: One 72-pin SIMM socket up to 32MB EDO RAM
(WAFER-4823)
– Chip: HM86508 LCD/CRT VGA
Dimensions
– Bus: ISA
Display – V-RAM: 1MB EDO RAM
– Resolution: LCD: 800 x 600 CRT: 1024 x 768
– Connectors: DB-15 for CRT display / 44-pin pin-header for LCD
panel
Ethernet Realtek RTL8019 10Mbps Ethernet chip with RJ-45 connector
SSD One DiskOnChip socket
– WAFER-4823: 1 x RS-232 port and 1 x RS-232/422/485
selectable port
– WAFER-4821: 3 x RS-232 ports and 1 x RS-232/422/485
I/O selectable port
– 1 x parallel port (support SPP/EPP/ECP mode)
– 1 x FDD channel
– 1 x IDE channel 44-pin pin-header
Digital I/O 4 x Input and 4 x Output TTL Level
Exansion Slot One PC/104 expansion connector for add-on cards
WDT Software programmable, support 1~ 255 sec. system reset
A non-volatile 1Kbit EEPROM is provided to retain application
E²Key
critical read/write data (WAFER-4821)
Power – WAFER-4823 : [email protected] (32MB EDO RAM)
Consumption – WAFER-4821 : [email protected]
Operating
0~60ºC
Temperature
Relative
5~95%, non-condensing
Humidity
GW 700g
MB-1200
Ordering Information Compact Chassis for WAFER 4821/4823/4826

WAFER-4823 3.5” 486DX4-100 CPU Board with LCD/ CRT

Specifications
VGA, LAN Compact chassis for WAFER-4823/4821/4826
WAFER-4821 3.5” 486DX4-100 CPU Board with LAN, Drive Bays: 1 x 2.5” HDD
4COM Reserved space for PC/104 module
Power supply : ACE-855 series
WAFER-4821-M4 3.5” 486DX4-100 CPU Board with 4MB
Dimensions: 184(W) x 81 x 138(D)mm;
DRAM, LAN, 4 COM
(7.2” x 3.2” x 5.4”)
Net/GW: 1/2 (kg)
IEI Option
Ordering Information
SM-8E/16E/32E-MAPLE
8/16/32MB EDO RAM Module MB-1200W/ACE-855A
For WAFER-4821/4823/4826 compact chassis
Note: WAFER-4821-M4 will limite on maximum 4MB on
with ACE-855A power supply
board DRAM due to the limitation of the Maple chipset

1-85 w w w. i e i w o r l d . c o m
 ETX Series Best choice for Embedded Solutions

ETX Pentium-M CPU Module coming soon !! Single

Board
Computer

PIAGP Series

Fitting Solution for Embedded Application PICMG

ETX, Embedded Technology Extended, Half-Size

Industrial
is a new architecture for industrial applictions. It occurs a lot that a CPU board doesn’t meet industrial PC- based Motherboard
It fulfills the requirements for embedded applications, due to unsuitable board size, improper connectors 5.25” NOVA
location or missing functions. The only alternative solution was to EPIC NANO
technology by a compact module of most PC
develop a completely new design, which is expensive and very 3.5” WAFER
functions:
ETX
ETX divides a complete motherboard time-consuming. Now, IEI presents to you FSEA (Fitting Solution for
PC/104
system into two parts physically: Embedded Application) which is based on the open standard of ETX
Add-on Card
– ETX MODULE - as small as 4.5 x 4 technology and designed by JUMPtec.
IVC Card
size, carries CPU system and core ASICs Backplane
– BASEBOARD including all I/O Basic Concept of IEI FSEA
connectors, plus some supplementary
functions. LCD
ETX modules are scaleable and interchangeable. Thus with a single Product
baseboard, several products can be launched in the same time by the Series
aid of a wide choice of CPU modules.
ETX Advantages Chassis
– ETX architecture is widely used
– Minimum engineering & evaluation cost
M (ETX CPU Module) + N (ETX Baseboard) M x N Products
sangs & reduced business risks Power
In order to enhance the reliability and flexibility of ETX solutions, IEI
– Faster time-to-market supply
moves the Ethernet interface from the CPU module to the baseboard.
– The systems are scalable by just upgrading
Testing performance reveals that IEI’s innovative design produces
the CPU module
outstanding results.
– Flexible customer solution board design Peripheral

ETX CPU MODULE

APPLICATIONS
Digital Content Preview KIOSK
Portable Instrument Computers
Human Machine Interface Products
Point Of Sale (POS)
Home Automation
Multimedia Entertainment
Security Control Terminator
Transportation Operation Console ETX Baseboard

ETX Module Architecture

Dimensions
111.6
2.4 2.5

!
"

X4 X2

87.5
"
!
95
+0 92.5 !
-0.2 "

X3 X1 53.3
45.9
41.7
"

2.5 !
7.5 11.7

3
111
114
!: Location peg � 1.0� 0.5mm All dimensions without tolerance � 0.2mm
": Location peg � 0.7� 0.5mm
heatspreader top view

1.6 8

max. 2 2.8

side view
without heatsink

w w w. i e i w o r l d . c o m 1-86
 ETX Series IEI ETX CPU Module Series

Heat sink

Coming Coming Coming

Soon Soon Soon
ETX-EDEN-400E ETX-C400E/C400-650E ETX-PM-600E

ETX-GX-300E ETX-5800-733
Model Name ETX-GX-300/300E ETX-5800-733/800 ETX-EDEN-400/400E ETX-C400E/C400-650E ETX-PM-600E
Transmeta TM5800 733 ULV Intel Celeron400MHz/
CPU Level AMD Geode GX1 300MHz VIA EDEN 400MHz Intel® Celeron-M 600MHz
/800MHz ULV Intel Celeron 650MHz
System Chipset AMD CS5530A VT82C686B VIA VT8606/VT82C686B VIA VT8606/VT82C686B Intel® 852GM + ICH4
Graphic Controller On-Chip VGA Asiliant 69030 On-Chip VGA On-Chip VGA On-Chip VGA
Share system memory Share system memory Share system memory Share system memory
Graphic Memory 4MB RAM on chip
Max. 4MB Max. 32MB Max. 32MB Max. 32MB
18bit Single Channel 36bit Single Channel 36bit Dual Channel LVDS 48bit Dual Channel
LCD Interface 36bit Dual Channel LVDS
LVDS LVDS (TV Out optional) LVDS(TV Out optional)
DRAM Up to 512MB Up to 512MB Up to 512MB Up to 512MB Up to 1GB
Ethernet Realtek 8100BL (300E) N/A Realtek 8100BL (400E) Realtek 8100BL i82562ET
2*IDE ATA-33 2*IDE ATA-100 2*IDE ATA-100 2*IDE ATA-100 2* IDE ATA-100
1*LPT/FDD 1*LPT/FDD 1*LPT/FDD 1*LPT/FDD 1*LPT/FDD
I/O Interface 2*RS-232 2*RS-232 2*RS-232 2*RS-232 2*RS-232
2*USB 1.1 4*USB 1.1 4*USB 1.1 4*USB 1.1 6*USB 2.0
1*PS/2 1*PS/2 1*PS/2 1*PS/2 1*PS/2
Audio AC’97 Codec AC’97 Codec AC’97 Codec AC’97 Codec AC ‘97 Codec
Software Programmable Software Programmable Software Programmable Software Programmable Software Programmable
WTD
1~255 sec. 1~255 sec. 1~255 sec. 1~255 sec. 1~255 sec.
Power Management APM ACPI ACPI ACPI ACPI
[email protected]; [email protected] [email protected]; [email protected] [email protected]; 5VSB@250mA 5V@3A; 5VSB@180mA
Power Consumption (NS GX1-300MHz, 128MB (TM-5800-733MHz, (VIA EDEN400MHz, (ULV Celeron400MHz, --
DRAM) 128MB DRAM) 128MB DRAM) 128MB DRAM)
Operation Temperature 0°C~60°C 0°C~60°C 0°C~60°C 0°C~60°C 0°C~60°C
Relative Humidity 0-95%, Non-condensing 0-95%, Non-condensing 0-95%, Non-condensing 0-95%, Non-condensing 0-95%, Non-condensing

Ordering Information
Note: ETX-GX-300 AMD GX 1-300MHz ETX CPU Module
ETX-GX-300E, ETX-EDEN-400E, ETX-GX-300E AMD GX 1-300MHz ETX CPU Module with LAN function
ETX-C400E, ETX-C400-650E, ETX- ETX-5800-733-128MB Transmeta TM5800 733MHz ETX CPU Module with 128MB SDRAM
PM-600E are compatible with iEi
ETX-5800-733-256MB Transmeta TM5800 733MHz ETX CPU Module with 256MB SDRAM
Baseboard Model name: ETX-DB-
ETX-5800-733-512MB Transmeta TM5800 733MHz ETX CPU Module with 512MB SDRAM
7S-R20
ETX-GX-300, ETX-5800-733/800, ETX-EDEN-400 VIA EDEN 400MHz ETX CPU Module
ETX-EDEN-400 w/o LAN chip are ETX-EDEN-400E VIA EDEN 400MHz ETX CPU Module with LAN function
compatible with IEI Baseboard ETX-C400E-R10 ULV Intel Celeron 400 MHz ETX CPU Module with LAN function
Model name: ETX-DB-7S, ETX-DB- ETX-C400-650E-R10 ULV Intel Celeron 650 MHz ETX CPU Module with LAN function
ATXR, ETX-DB-DVR1 ETX-PM-600E-R10 ULV Intel Celeron-M 600 MHz ETX CPU Module with LAN function

1-87 w w w. i e i w o r l d . c o m
 ETX Series IEI ETX Baseboard series

Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
ETX-DB-7SR-R20 ETX-DB-ATXR ETX-DB-DVR1 PC/104
Full Function ETX Baseboard with LCD/CRT VGA, ETX Evaluation Baseboard with ETX Baseboard with 4 Capture Engine Add-on Card
Audio, DOC, CF II & D I/O LCD/CRT VGA, LAN, Audio & D I/O CF II, Dual LAN, Audio & D I/O
IVC Card
Backplane
Dimensions Dimensions Dimensions
LCD
Product
Series

Chassis

Power
supply

IEI ETX Baseboard Peripheral

ETX-DB-7SR-R20 ETX-DB-ATX ETX-DB-DVR1

CPU Module
ETX Form Factor ETX Form Factor ETX Form Factor
Interface
IEI ETX Customization Flow 1 x 20-pin 24bit DFP for LVDS
LCD Connector 1 x 30-pin 48bit DFP for LVDS 1 x 30-pin DFP 1 x 20-pin 36bit DFP
Slot 1 x44-pin for 24bit TTL for LVDS for LVDS
1 x 44-pin for 18bit TTL
Extension Slot 4 x PCI, 3 x ISA 2x PCI, 1 x ISA 1 x PCI
(ETX-DB-7SR-R20)N/A
Ethernet Chip Realtek 8100BL 2 x Intel 82559
(ETX-DB-7SR) Realtek 8100BL
CompactFlash Type II
SSD CompactFlash Type II socket N/A
socket
Audio A’97 AC’97 C-Media (CMI 8738)

Ethernet Connector N/A 1x RJ- 45 2x RJ- 45

RS232 3 2 1 (TX,RX only)

RS232,422,485 1 N/A 1
KB/MS 2 2 1
LPT 2 1 N/A
VGA 1 1 1
USB 4 4 2
IDE Connector 2 2 2
FDD 1 1 N/A
DOC 1 N/A N/A
DIO 4 inputs, 4 outputs 4 inputs, 4 outputs 4 inputs, 4 outputs

IR connector 5 pin-header 5 pin-header N/A

Video Capture Chip N/A N/A 4 x BT878A
Video Capture
N/A N/A 4 x BNC connector
Connector

Ordering Information
ETX-DB-7SR ATX Size 7 Slots ETX Baseboard with Realtek 8100BL LAN
ETX-DB-7SR-R20 ATX Size 7 Slots ETX Baseboard w/o Realtek 8100BL LAN
ETX-DB-ATXR ETX Evaluation Baseboard with Realtek 8100BL LAN
ETX-DB-DVR1 ETX DVR Baseboard with Dual Intel 82559 LAN

w w w. i e i w o r l d . c o m 1-88
 ETX Series IEI ETX Module Connector Pin Definition

LAN

LINE LED

ACT LED

SPEED LED

RX-
RX+

TX-
TX+

Note: Red color for Ethernet function

1-89 w w w. i e i w o r l d . c o m
 PM-1045 PM-1043
PC/104 SiS552 CPU Board with on board PC/104 STPC CPU Board with on
DRAM, LCD/CRT VGA, LAN & Audio board DRAM, LCD/ CRT VGA
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Specifications Specifications
Chassis
CPU: Embedded SiS 552 x86 MMX compatible CPU CPU: Embedded STPC Elite/Consumer II CPU
System Memory: On board 64/128MB PC133 SDRAM System Memory: On board 32/64MB SDRAM & 1xSO-DIMM
Display: SiS552 embedded with Hardware 2D/Video/ slot totally support up to 128MB Power
supply
Graphics Model PM-1043VLCD Series PM-1043V Series
Accelerators Asiliant (C&T) 69000 On Chip STPC Consumer II
Resolution: 1024 x 768 @ Resolution: 1280 x 1024 @
– AGP 4X Compliant / Fully DirectX 8 Compliant VGA
24-bit 24-bit
Controller Peripheral
– Supports Shared System Memory up to 128 MB Connector: 16 pin-header Connector: 16 pin-header for
– Resolution supports up to 1920 x1440 true colors for CRT CRT
– 18-bit TTL for LCD display HRS DF9 51 pin-header
LCD N/A
for 36-bit TFT LCD
SSD: 1 x DiskOnChip socket
Audio: AC’97 CODEC SSD: 1x DiskOnChip + 1 x CompactFlash Type II
Ethernet: 1 x 10/100Mbps RTL8100BL LAN controllers I/O:
I/O: – 1 x PS/2 connector for keyboard/mouse
– 1 x RS-232 serial port – 2 x RS232, 1 x LPT
– 1 x RS/232/422/485 serial ports – 1 x EIDE (ATA-2) channel, 1 x FDD
– 1 x PS/2 connector for Keyboard/Mouse WDT: Software programmable support 1~255 sec system
– 1 x LPT parallel port supports SPP/ECP/EPP Mode reset
– 2 x USB 1.1 Power Consumption: [email protected] (STPC-DX2 / 64MB
– 2 x IDE ATA-100 SDRAM)
– 1 x Floppy Operation Temperature: 0~60ºC
WDT: Software programmable supports 1 ~ 255 sec system Relative Humidity: 5~95%, non-condensing
reset
Digital I/O: TTL Level, 4 x inputs & 4 x outputs
Power Source: Single +5V only
Operation Temperature: 0~60ºC
Relative Humidity: 5~95%, non-condensing

Cable kit

Ordering Information

PM-1043-32MB
PC/104 STPC Elite CPU Board with 32MB DRAM
PM-1043V-32MB
PC/104 STPC Consumer II CPU Board with 32MB SDRAM, VGA
Ordering Information PM-1043VLCD-32MB
PC/104 STPC Elite CPU Board with 32MB DRAM, LCD/ CRT VGA
PM-1043-64MB
PC/104 STPC Elite CPU Board with 64MB DRAM
PM-1045-128MB
PM-1043V-64MB
PC/104 SiS552 CPU Board with 128MB DRAM, LCD/CRT VGA,
PC/104 STPC Consumer II CPU Board with 64MB SDRAM, VGA,
LAN & Audio
PM-1043VLCD-64MB
PM-1045-64MB
PC/104 STPC Elite CPU Board with 64MB DRAM, LCD/ CRT VGA
PC/104 SiS552 CPU Board with 64MB DRAM, LCD/CRT VGA,
LAN & Audio

w w w. i e i w o r l d . c o m 1-90
 PM-1041 PM-1021
PC/104 STPC Client CPU PC/104 386SX- 40 Module with
Board with VGA LCD VGA/ 4MB DRAM

Power Cable

Specifications Specifications
CPU: Embedded STPC Client support up to133MHz 486 core CPU CPU : 386SX-40 class on-chip
System Memory: 1xSO-DIMM support up to 32MB EDO RAM System Memory :
Display: - On chip STPC Client 4MB EDO RAM on board
– V-RAM: 512KB~4MB, share with system memory System Chipset : ALi M6117 chipset
– Resolution: up to 1024 x 768 (64k colors) Video Controller :
SSD: 1 x DiskOnChip – HM86508
I/O: – VRAM : 512KB
– 2 x RS232 – Resolution : 800 x 600 (256 colors)
– 1x LPT Super I/O :
– 1 x IrDA port – 2 x serial ports (16550 compatible UART)
– 1 x FDD – 1 x parallel port (support SPP/EPP/ECP)
– 1 x IDE 44-pins by pin header IDE : One 40-pin pin-header, support PIO-4 mode
Power Consumption: [email protected] (STPC Client 32MB EDO RAM) FDD : One port
Operation Temperature: 0~60ºC (CPU cooler needed) Watchdog timer
Relative Humidity: 5~95%, non-condensing Power Consumption : [email protected]

Ordering Information Ordering Information

PM-1041 PM-1021
PC/104 STPC Client CPU Board with VGA PC/104 386SX-40 Module with LCD VGA/ 4MB DRAM

PM-1058 PM-1056
PC/104 Plus, Muilti- Channels Video
PC/104 Plus Dual Channel MPEG 4
audio and video capture module Capture Module with GPIO function

Coming
Soon
4xRCA
Connector
Cable kit

PM-1056-16PG PM-1056-4PG 25 Pins to 16xBNC input

/ 1xBNC output cable
VIN-KIT-03
PM-1058
Specifications Specifications
Analog Video Capture Engine:
PC/104 Plus form factor – Conexant Fusion BT878A Capture Engine
Dual MPEG-4 Encoder controllers – NTSC/PAL/SECAM PCI Video Decoding
VIN-KIT-01
ALi M5273 USB2.0 host controller 4xBNC Connector Board
– Flexible 24-bit wide GPIO (PM-1056-4PG/16PG)
Philips SAA7113 Video Decoder Functionality Support
AKM 5355VT 16-Bit Stereo Audio A/D Converter – NTSC: 720x480, 704x480, 640x480, 352x240, 320x240, 176x112
On-board 16 MB SDRAM – PAL: 720x576, 704x576, 640x576, 352x288, 320x288, 176x144
Video input: dual channel BNC Video/S-Video; NTSC/PAL/SECAM auto – Video loss detection
sensing Multi-Screen/Image brightness/Resolution adjustment
Audio input: dual channel Stereo Audio Capture Frame Rate :Max. 30 fps for 4 channels
PCI V2.1 Compliance; Plug & Play supported Provide WDM driver and SDK software development kits
Ship with VIN-KIT-03 (2-channel BNC Video/S-Video + 2 Mic-phone jack Audio Support OS: Window 98, SE, ME, 2000, NT, XP and Linux
bracket board) Power Consumption: 3.5W@5V
Operating Temperature: 0~50ºC
PM-1056-4PGB
PM-1056-4P
Ordering Information
PC/104 Plus, 4 Channels Video Capture Module
PC/104 Plus, 4 Channels Video Capture with GPIO, VIN-Kit-01
Module
PM-1056-16P
PM-1056-4PB PC/104 Plus, 16 Channels Video Capture
PM-1058 PC/104 Plus, 4 Channels Video Capture Module
PC/104 Plus Dual Channel MPEG 4 audio and video capture Module with VIN-Kit-01
PM-1056-16PG
module PM-1056-4PG PC/104 Plus, 16 Channels Video Capture
PC/104 Plus, 4 Channels Video Capture Module with GPIO function
Module with GPIO function

1-91 w w w. i e i w o r l d . c o m
 PM-1002 PM-1055
PC/104 Plus Dual CAN & LAN module PC/104 plus 3 x 10/100/1000Mbps
Ethernet Module
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

Cable sets LCD

Product
Series

Specifications Specifications Chassis

PC/104 Plus form factor PC/104 Plus Interface
Dual CAN bus function, with Phillip SJA1000T CAN controller, 3 x 10/100Mbps Intel 82551 (PM-1055E-3P)
Phillip 82C251 CAN transceiver Power
3 x Gigabit LAN Intel 82540 (PM-1055G-3P)
One 10/100Mbps Realtek Rtl8100BL LAN supply
3 x RJ-45 connectors
Ship with dual DB-9 CAN ports and RJ45 LAN port cable sets Supports Teaming function
O.S Supporting: Windows 98/NT/2000/XP, Linux & Win Power Consumption: [email protected]
CE.NET Driver support: Window 98, SE, ME, 2000, NT, XP and Linux Peripheral

Tech Talk Tech Talk

CAN Applications Teaming Feature Introduction:
The industrial truck sector comprises elevating trucks, fork-lift Teaming Features include Failover protection, increased bandwidth
trucks and high-lift trucks for a large variety of applications. The through aggregation, and balancing of traffic among team members.
primary tasks of industrial trucks are thus the moving, raising, Fault Tolerance
lowering, turning, tilting, gripping and releasing of goods. These Uses one or more secondary adapters to take over for the primary
complex movement patterns and the exact and safe positioning adapter should the first adapter, its cabling or the link partner fail.
of the loads are ensured by the automatic control system. The Designed to ensure server availability to the network.
potentiometers are installed either directly at the actuator of the Link Aggregation
steering system or – when driven indirectly by means of a pinion The combining of multiple adapters into a single channel provides
and toothed belt – at the lifting gear, or at the fork adjuster of a fork greater bandwidth to multiple destination adresses. This increase
lift truck. The CAN-based control systems are fitted with interfaces bandwidth to multiple destination addresses. ALB mode provides
recognizing the potentiometric output signals. aggregation for transmission only while RLB and LA/FEC/GEC/3ad
modes provide aggregation in both directions. FEC/GEC/LA/3ad
CAN is used as embedded network and as in-vehicle power-train modes require a matching aggregation capable switch, while ALB
network in many off-road and off-highway vehicles. The electronic and RLB modes can be used with any switch.
control units (ECUs) connected to the CAN networks may control Load Balancing
the diesel engine or the electrical drives if the vehicles are battery- The distribution of the transmission and reception load among the
powered. The range of vehicles using CAN includes agricultural aggregated network adapters. An intelligent adaptive agent in the
and forestry vehicles as well as special vehicles for mining, aircraft ANS driver repeatedly analyzes the traffic flow from the server and
towing, road construction, etc. In many of these vehicles the distributes the packets based on destination addresses. (In LA/FEC/
implements (add-on sub-systems such as harvester, cranes, etc.) GEC/3ad modes, the switch similarly provides load balancing on
are also connected to the CAN networks. Fork-lift and lift-trucks are incoming packets.)
also equipped with CAN-based networks for both drive-train ECUs
and hydraulic components.

Ordering Information Ordering Information

PM-1055E-3P
PM-1002 PC/104 Plus, 3 x Intel 82551 LAN Module
PC/104 Plus Dual CAN & LAN module
PM-1055G-3P
PC/104 Plus, 3 x Intel 82540 GbE Module

w w w. i e i w o r l d . c o m 1-92
 PM-1004 PM-1028
PC/104 4-port RS-232/422/485 Module PC/104 4/8-Port RS-232 Module

IEI Communication Module

Specifications Specifications
PC/104 form factor PC/104 form factor
16C554 UART Controller 16C554 UART Controller
4 x RS-232/422/485 Supports shared IRQ or independent IRQ mode
Supports shared IRQ or independent IRQ mode Interrupt vector addressing setting
Jumper selectable interrupt level Jumper selectable interrupt level
MAX. baud rate: 921.6kb/s COM port base I/O addressing setting
Support O.S: Windows NT/2000/XP, Linux and windows MAX. baud rate: 921.6kb/s
CE.NET Supports O.S: Windows NT/2000/XP, Linux and windows
CE.NET
Tech Talk
RS-422 & RS-485 Features:
The RS-422 standard allows only one differential way 4/8 independent COM channels
communicational mode, using a twisted media pair. The maximum Two 16C554-compatible quad UARTs
data rate, not implemented at max cable length, is 10Mbps and its 128-byte TX and RX receive FIFOs
max cable length is 1200 meters. Each driver can drive up to 10 Programmable serial interface characteristics for each channel
receivers. Shared interrupt capability with ID register

The RS-485 is basically an update of the RS-422 specification

for multipoint buses to be constructed. This standard meets and
improves all the requirements of the RS-422, allowing up to 32
drivers and 32 receivers in addition, which can be connected to a
single bus.

iEi’s PM-1004 serial port communication module offers 4

independent RS-232/422/485 serial ports for connecting data
acquisition equipment and many other serial devices to the PC
and its compatible system. It provides a reliable communication
link over a longer distance and optional surge protection make it
suitable for industrial environments. Connections with point-to-point
full-duplex or multidrop half-duplex are available to meet user’s
various needs. Ship with 4-port RS-232 connection cable
P/N: 32200-025400

Ordering Information
Ship with 4-port RS-232/422/485
connection cable
P/N: 32200-026800
PM-1028-4
PC/104, 4-port RS-232 PC/104 Module
Ordering Information
PM-1028-8
PM-1004 PC/104, 8-port RS-232 PC/104 Module
PC/104 4-port RS-232/422/485 Module

1-93 w w w. i e i w o r l d . c o m
 PM-1054 PM-1038
PC/104 Plus Card Bus PC/104 Dual PCMCIA Module
PCMCIA module
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Specifications Specifications Power

supply
Chipset: RICOH R5C478 Card Bus controller Complies with PCMCIA2.1 and JEIDA4.2 standard
Data Bus: 32-Bit, 33MHz (133MB/s), DMA bus master Accepts TypeI/II/III PCMCIA cards
(Compliant with PCI 2 .1) 16-bit data bus Peripheral
PC Card 95/97/98 32-bit CardBus compatible Easy host interface using ISA I/O addresses
Supports Plug & Play auto-detected & configuration 3E0h,3E1h
Driver support: Windows 98/ME/NT/2000 Programmable IRQs to level mode or edge trigger
Accepts PCMCIA Type I/II/III mode
2xPCMCIA slots PCMCIA-AT-A Disk interface support
DMA mode support

Tech Talk Tech Talk

CardBus Introduction PCMCIA Introduction

The power and versatility of PC Cards quickly made them standard
In early 1995, PCMCIA introduced the 32-bit CardBus standard. equipment in mobile computers. The rapid development and
Although electrically different, the CardBus is architecturally worldwide adoption of PC Card technology has been due in large
identical to the PCI bus. The CardBus supports bus mastering and
part to the standards efforts of the Personal
accommodates cards operating at different voltages. Its advanced
Computer Memory Card International
power management features allows the computer to take advantage
Association (PCMCIA).
of CardBus cards designed to idle or turn off in order to increase
battery life. The CardBus specification allows data transfer up to 132
The association PC Card Standard is now
Mbytes/sec over a 33MHz, 32-bit data path.
bringing the benefits of these same PC
85.6 mm
Cards to a variety of industries and vertical Type I = 3.3mm thick

applications, including smart cards, set-top Type II = 5.0mm thick

Type III = 10.5mm thick
boxes, automobiles, and others. The PC Card
technology compact size and ruggedness
PCMCIA Key Features make it the ideal technology for a wide variety
Interconnect Area
Hot swap capability for Type I, II & III cards of applications. 3.3mm
Designed and developed for embedded systems 54.0 mm

Ordering Information Ordering Information

PM-1054
PC/104 Plus Card Bus PCMCIA module ( only work with IEI SBC)
PM-1038
PM-1054A PC/104 Dual PCMCIA Module
PC/104 Plus card bus PCMCIA with PC/104 (ISA Bus) connector
module
(Meets PC/104 Plus standard specification for general appliances)

w w w. i e i w o r l d . c o m 1-94
 PM-1037 PM-1033
PC/104 Compact Flash Convert Board
HM86508 LCD/CRT VGA
with 2S1P

Specifications Specifications
1 x CompactFlash™ Type II Socket Video Controller :
Supports IBM Microdrive – Chip : HM86508
1 x 44-pins & 1 x 40-pins IDE interface by pin-header – VRAM : 1MB
1 x RS-232 – Resolution : 1024 x 768 (64K colors)
1 x RS-232/422/485 – Output :
Interrupt Selectable (IRQ 3/10 for COM1; IRQ 4/11 for 2x5 pin-header for CRT display
COM2; IRQ 5/7 for LPT) 2x22 pin-header for LCD panel
I/O address Selectable (3E8H/3F8H for COM1; 2E8H/ One DiskOnChip socket on board
2F8H for COM2; 278H/378H for LPT) HM86508 LCD/CRT VGA controller on board
LPT port support SPP & EPP Mode One DiskOnChip socket on board
Master/Slave jumper for IDE port Standard PC/104 form factor
Power Requirement: +5V DC

Ordering Information
PM-1037CS-R4
Ordering Information
PC/104 Compact Flash with 2S/1P Module PM-1033
PC/104 HM86508 LCD VGA (1MB) Module

PM-1031 A104-KIT01
10Mbps Ethernet & DOC Socket ISA & PC/104 Diagnostic Card

Specifications Specifications
Realtek RTL8019 10Mbps Ethernet chip on board with RJ-45 Bus : ISA and PC/104
connector 7-Segments LED display for port 80H BIOS error code
Two DiskOnChip sockets on board, which support a utility software to Troubleshooting for POST (Power On Self Test) when system
combine boot-up
two SSD as one drive under DOS environment. 8-pin external power connector for PC/104 system testing
Power Consumption : [email protected] (Without DiskOnChip SSD )

Ordering Information Ordering Information

PM-1031 A104-4232P PC/104 4 16550 RS232 Module
PC/104 LAN & DOC Socket Module A104-KIT01A ISA & PC/104 Test Card

1-95 w w w. i e i w o r l d . c o m
 PM-1057 PM-1001
PC/104 Plus Serial ATA & USB 2.0 Module PC/104 Plus PCI to ISA Bridge Module

Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Power
supply

Specifications Specifications Peripheral

PC/104 Plus form factor PC/104 Plus standard form factor

4 x Serial-ATA (Sil3114) IT8888F PCI to ISA bridge
2 x USB 2.0 (VT6202) PCI 2.1 compliant
Use pin-header for PCI master selection Support 32-bit PCI bus up to 33MHz
Note: PM-1001 only support Intel chipset

Ordering Information Ordering Information

PM-1057 PM-1001
PC/104 Plus PCI to ISA Bridge Module
PC/104 Plus Four Serial ATA and USB 2.0 Module

Tech Talk

Serial-ATA Benefits of Serial ATA

Serial ATA is a new way of connecting your storage devices. For Serial ATA offers a number of benefits over
example, you are all used to the way we connect IDE devices to Parallel ATA, including:
the motherboard. We have a wide 40/80 pins wire plugged into both Reductions in voltage and pin count
the motherboard and the storage device. These wires are big and Smaller, easier-to-route cables; longer cable-length limitation
bulky and often get in the way of a lot of other components inside Improved data robustness
the chassis. They are also based on Parallel data transmission Backward compatibility
which sends data in parallel, causing interference with other signals. Parallel ATA Serial ATA
Serial connectors only have a send and receive, causing much less 100/133 150/300/
problems in that respect. The features of Serial-ATA is as below: Bandwidth
MB/Secs 600 MB/Secs
Compact design of only 7-pin data cable. Volts 5V 250mV
Supports up to a maximum transmission distance of Pins 40 7
100CM
Length 18 inch 1 meter
High speed transmission rate from 150MB (V1.0) to 600MB Limitation (45.72cm) (100cm)
(V3.0)
Cable Wide Thin
Supports Plug & Play
Supports RAID 0, 1 Ventilation Bad Good
Peer-to-Peer No Yes

w w w. i e i w o r l d . c o m 1-96
 MLAN-1000 MLAN-104/104SSL
Quad Intel 82540 Gigabit LAN 4 LAN Ports Carry Board
Card with Bypass function

MLAN-104
MLAN-1000Q

MLAN-104SSL
MLAN-1000DBP
Specifications
Bypass
Relays Bus interface: 32-bit PCI interface (PCI 2.1 compliant)
82540EM Bridge chips: Intel 21150 or equivalent chip
PI7C8154 Ethernet�#1
PCI�BUS 32-bit Expansion: Two socket PCI connectors
PCI-to-PCI
32-bit bridge�chip
LAN module: LM-102N (Intel 82559) / LM-2G (Broadcom 5701
or
64-bit (64�or�32-bit) 82540EM GbE)/ LM-102R (Realtek RTL-8100) / LM-2GN(Intel 82540)
32-bit Ethernet�#2 SSL chips: Rainbow Fastmap SSL Accelerator onboard
PCI�Slot
(MLAN-104SSL only)
Bypass�State
GPIO0
Relays�are�"Dis-energized Comply with IEEE802.3; IEEE 802.3x Ethernet specifications
GPIO1
I/O connection: Four RJ-45 connectors
Relay
GPIO2
WDT Driver Power requirement: +5V@3A max
GPIO3 Normal�State Operating environment: 0 ~ 50ºC
SWI
Time�out�value ByPass�State Relative humidity: 5 ~ 95%; non-condensing
Dimensions: 177mm x 107mm

Specifications Ordering Information

LAN Controller: Four Intel 82540EM 10/100/1000 Mbps Ethernet
MLAN-104
controller
4 LAN ports carry board
Bus Interface: 64-bit PCI interface (PCI 2.2 compliant)
Bridge chips: Pericom PI7C8154 PCI bridge on board (Support 32/64/
MLAN-104SSL
4 LAN ports with SSL Accelerator carry board
bits up to 33/66 MHz)
I/O Connection: Four RJ-45 connectors (Two RJ-45 connectors optional) LM-102N-x50
Features: Built-In Watch-Dog Timer for Bypass function Dual Intel i82550 LAN module
Panel-Free design: Reserved extra pin-header for LAN status LED LM-102N-x59
display Dual Intel i82559 LAN module
Software Utility: Software utility for doing functionality configuration LM-102R
Dual Realtek RTL-8100 LAN module
Bypass function LM-2G
There are two communications states for the bypass function Dual Broadcom 5701 Gigabit LAN module
and default enabled in Normal State. A watch-dog-timer (WDT) LM-2GN
is used to control and switch the communication between the Dual Intel 82540 Gigabit LAN module LM-2G
two states. A relay array is controlled by the WDT for physically
routing of the two Ethernet ports.
The block diagram shows the two Ethernet ports can still
operate normally when the operation of the system suspends.

Ordering Information
MLAN-1000DBP: LM-2GN
Dual Intel 82540 Gigabit LAN with Bypass function Card
MLAN-1000Q: Quad Intel 82540 Gigabit LAN Card LM-102R LM-102R

1-97 w w w. i e i w o r l d . c o m
 PLC-508 PLC-69030
ISA HM86508 LCD VGA Card/1MB PCI CHIPS69030 LCD VGA Card/4MB

Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
PLC-508 PLC-69030 Backplane

Specifications Specifications LCD

Product
Bus: 16-bit ISA bus
Bus : 32-bit PCI bus Series
Connector:
Connector :
CRT : DB-15 for standard monitor
CRT : DB-15 for standard monitor
LCD : 44-pin pin-header for TTL signal
LCD : 50-pin pin-header for TTL signal Chassis
Video RAM : 1MB
Optional LVDS-01/02/03/04 Module
Video Chip : HM86508 LCD/CRT VGA
Video Chip : CHIPS 69030 with 4MB V-RAM
Max. Resolution : 1024 x 768, 256 colors
Max. CRT Resolution : Power
Driver Support : DOS, Windows 3.1/95/98/NT/2000
1280 x 1024, 24 bit colors supply
Supports 3.3V and 5V LCD power
1600 x 1200, 16 bit colors
Output 40V VEE for LCD panel needed
Max. LCD Resolution: 1024 x 768, 36 bit colors
Simultaneous CRT and LCD display
Supports 3.3V and 5V LCD power
One DiskOnChip Socket on board Peripheral
Simultaneous CRT and LCD display
Supports 24-bit and 36-bit data signals

PVGA-9970 ICAN-02
PCI-bus VGA Card Dual port CAN Bus communication card

PVGA-9970
ICAN-02
Specifications Specifications
Graphics Engine: Winbond W9970
64-bit graphic acceleration, 8/16/24-bit CAN Bus: 2 x CAN Bus 2.0B (29 bits for message frame identifier)
per-pixel true-color acceleration Provide Supports baud rate up to 1MHz
high level graphic commands 32-bits PCI Bus
Display Memory: 2MB V-RAM onboard Supports Plug & Play (PLX PCI9052 )
Resolution: 800 x 600 (24-bit color), 1024 x 768 (16-bit Isolation voltage: 2500Vrms
color) CAN controller: Phillip SJA1000T
RAMDAC: On-chip 24-bit true color RAMDAC with up to CAN transceiver: Phillip 82C251( CAN transceiver for 24V systems)
135MHz pixel clock Provided Sample code and SDK(Software library DDL and
Bus: 32-bit PCI local Bus revision 2.1 specification Development Kits included)
OS driver support: Windows 3.1, Windows 95/98/Me, Driver supported Microsoft Windows 95/98/ME/NT/2000/XP
Windows NT4.0

Ordering Information Ordering Information

ICAN-02 Dual port CAN Bus communication card with
PVGA-9970 PCI-bus VGA card isolated protection

w w w. i e i w o r l d . c o m 1-98
 LCD LVDS Module / DOC Module
LVDS-01-R7 One Channel LVDS Module FP24-01A LCD Connection Module

Supports 18-bit TFT LCD 2.0 pitch 44-pin connector

Compatible to TIA/EIA-644 for 18/24-bit LCD panel
LVDS standard Connecting to ICP series
Long distance drive capability SBC 50-pin LCD connectot
20-pin Hirose DF14A-20P-1.25H
connector

LVDS-02 Two Channels LVDS Module

Supports 24/36-bit TFT LCD
Compatible to TIA/EIA-
FP24-02 LCD Connection Module
644 LVDS standard
Long distance drive capability 2.0 pitch 44-pin connector
20-pin Hirose DF14A-20P-1.25H for 18/24-bit LCD panel
connector Connecting to ICP series
SBC 50-pin LCD connectot
Designed with buffer for
high quality output
Note: FP24-02-V10 support 3.3V
LCD power
LVDS-03 Two Channels LVDS Module
Supports 24/36-bit TFT LCD
Compatible to TIA/EIA-644 LVDS
standard
Long distance drive capability
20-pin Hirose DF14A-20P-1.25H
connector
Designed for DELIGHT 913/915
portable workstation

DOC-KIT01 DiskOnChip™ Carry Board DiskOnChip Flash Disk Chip

Full boot operability
Bus : 16-bit ISA bus
Built-in TrueFFS which provides
Three DiskOnChip sockets on board
full hard disk read/write
Software utility to combine multi-DOC
compatibility
chip as one driver under DOS environment
Extensive O/S support OS,
One 8K SRAM socket :
Windows, Windows 95 and
– Support 3xAA battery to keeping data
Windows CE Additional support
in SRAM memory, backup data up to 10
offered: QNX, VxWorks
years
and others
– 8K memory address support directly data
Capacity: 8 (DOC-Millennium),
access
16, 24, 32, 48, 80, 112, 144, 192,
– No software utility needed
224, 256, 288 MB

DOC-KIT104 PC/104 DiskOnChip™ Carry Board IFD-KIT01 IDE Flash Disk Carry Board
Bus : PCI and ISA
Designed for 1.8” or 2.5” IDE flash disk (IDE-
FD180/250)
One 40-pin (3.5” HDD, 2.54mm pitch) pin-
Bus : PC/104
header and one 44-pin (2.5” HDD, 2.0mm
Four DiskOnChip sockets on board
pitch) pin-header to SBC
Software utility to combine multi-DOC
Best solution for embedded system which no
chip as one driver under DOS environment
HDD drive space

Please refer to tables above for better Backplane PCI resources arrangement.

1-99 w w w. i e i w o r l d . c o m
 IFD-180A/250A/350A IFM-405/445
1.8”/ 2.5”/ 3.5” IDE Flash Disk Flash Disk Module

Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

IFD-180A/250A/350A IFM-405/445 LCD

Product
Series

Chassis

Specifications Specifications
Power
supply
Compatibility : Full IDE hard disk compatible Compatibility : Full IDE hard disk compatible
IDE Controller: SST IDE Controller: SST
Capacity : 32MB, 64MB, 128MB, 192MB, 256MB, 512MB Peripheral
Model Capacity (Unit : Mbyte)
Connector : IFM-405 : 40-pin, 2.54mm pitch
IFD-180 32, 64, 128, 192, 256, 512, 1024, 1536, 2048 IFM-445 : 44-pin, 2.00mm pitch
Reliability : MTBF : > 1,000,000 hours
IFD-250 32, 64, 128, 192, 256, 512, 1024, 1536, 2048 Endurance :Write/Erase: 1 Million cycles (typ.)
Read : Unlimited
IFD-350 32, 64, 128, 192, 256, 512, 1024, 1536, 2048 System Performance : Access time : < 0.1ms
Track to track seek time : < 0.1ms
Bus transfer speed : 16.7Mbytes/Sec.
Reliability : MTBF : > 1,000,000 hours,
Power Requirement : DC input; +5V ±10%
Endurance : Write/Erase: 1 Million cycles (typ.)
Power Consumption (Typical):
Read : Unlimited
System Performance : Access time : < 0.1ms, Track to track Mode @+3.3V±5% @+5V±10%
seek time : < 0.1ms, Bus transfer speed : 16.7Mbytes/Sec. Sleep 200µA 500µA
Power Requirement : DC input; +5V±10%
Read 21mA 34mA
Operating Temperature : -10°C ~ 70°C
Storage Temperature : -25°C ~ 85°C Write 24mA 34mA
Humidity : 5 ~ 95% non-condensing
Shock : 1,000G max.
Vibration : 15G peak-to-peak max.
Acoustic Noise : 0dB Operating Temperature : -10°C~ 70°C
Altitude : 50,000 feet Storage Temperature : -25°C ~ 85°C
For other capacity flash disk, please contact supplier Humidity : 5 ~ 95% non-condensing
Altitude : 50,000 feet
Dimensions :58(W) x 38.8(H) x 9.1(D)mm (IFM-405)
52.8(W) x 34.9(H) x 7.7(D)mm (IFM-445)

Ordering Information Ordering Information

IFM-405- cap MB
IFD-180A- cap : cap MB 1.8” IDE flash disk
cap MB IDE flash disk module, 40-pin
IFD-250A- cap : cap MB 2.5” IDE flash disk
IFM-445- cap MB
IFD-350A- cap : cap MB 3.5” IDE flash disk
cap MB IDE flash disk module, 44-pin
cap Capacity size of each flash disk
cap Capacity size of each flash disk

w w w. i e i w o r l d . c o m 1-100
 IVC-4300 4-Channel MPEG- 4 Audio/Video Capture Card

IVC-4300 is an audio/video capture card designed for multi-channel applications. It includes 4-channel
Video and Audio MPEG-4 hardware encoder to provide real-time VGA quality video and stereo audio
capture for each channel.
Coming
Key Features Soon
4-Channel Full-D1 resolution real-time recording
4-Channel Stereo Audio input
NSTC/PAL Auto-Sensing
Support up to total 120 VGA frames per second
Support stereo audio with 16-bit data quantization
Smart ID number supports for easy system maintenance
Provide SDK and demo program for software application
development

SDK
SDK of IVC-4300 offers 4-challel Audio/Video preview /
recording function. You can adjust the detailed parameters,
supporting various kinds of image file format, such as”MPEG-
1”, “MPEG-2” and “MPEG-4”. So that you can easily develop
your own software for DVR or streaming software.

GPIO Application
This is the integrating module as the event trigger, providing
4 independent general purpose input connectors, including 4
relays for output on/off signal to other hardwar.

Specifications
Interface:
4 Ch. BNC Composite Video,
Video Input
NTSC/PAL auto sensing
Audio Input 4 Ch. Stereo Audio
PCI V2.1 Compliance,
PCI Interface
Plug & Play support
Card ID Dip-switch with 7-segment LED
Audio Processing:
Sampling Rate 44100 Hz and 48 KHz
Quantization 8 Bit data depth
Data Format PCM, ADPCM

Video Processing:
MPEG-4 Advanced Simple Profile @L3
Video Compression
MPEG-2 MP@ML ,MPEG-1
720 x 480, 352 x 240 (NTSC)
Video Resolution
720 x 576, 352 x 288 (PAL)
Frame Rate Up to 30(NTSC), 25(PAL) FPS for each channel
Image Processing Hardware control of brightness, contrast and saturation.
DVD quality full D1 video at 3 Mbps,
Video Quality High quality D1 video at 1 Mbps
High quality CIF video at 384Kbps
Software Support:
Ordering Information
Provide driver for Window 2000 IVC-4300
Device Driver
and Windows XP systems
4-Channel MPEG-4 Audio/Video Capture Card
Provide SDK and demo program
SDK
for software application development.

1-101 w w w. i e i w o r l d . c o m
 IVC-4200 4-Channel MPEG4 video capture card

Single
IVC-4200 Board
The Easiest Way to Develop MPEG4 DVR Solution Computer

PIAGP Series
The first DVR solution that supports complete MPEG4 DVR software development! Preview/recording programs and
PICMG
SDK(Software Development Kits) with detailed documents are available. Half-Size
Support “High” quality and “Low” bit rate image. You can adjust bit rate from 50Kb to 3M Kb, let you get perfect balance Industrial
between image file size and quality. So that you can easily develop your own software for DVR or Streaming software. Motherboard
5.25” NOVA
Support various kinds of image file format. Such as “MPEG1” , “MPEG2” , “MPEG4” , “DivX” , “Microsoft WMV” , “Sigma Design
EPIC NANO
MPEG4” , “H.263” , etc.
3.5” WAFER
ETX
PC/104
Overview: Add-on Card
IVC-4200 is a video capture card designed for multi- IVC Card
channel applications. It includes 4 channels MPEG-4 Backplane
hardware encoder to provide real-time VGA quality video
capture for each channel. LCD
Product
Key Feature: Series

4 Channels MPEG 4 Hardware Video Encoder

Video quality up to VGA (Full D1) size at real time (30 fps) Chassis
for each channel
Programmable constant bit-rate control
Power
supply

Specifications Peripheral

Hardware:

PCI Interface PCI V2.1 Compliance, Plug & Play support

MPEG4 Encoder x 4
Video Encoding
MPEG4 Advanced Simple Profile @L3

Analog Video
Video Decoder x 4
Capture

SDRAM 16MB

Video Input

4 Ch. BNC Composite Video, NTSC/PAL/SECAM auto

Video Input
sensing

Output Stream:

Multiple Video 720 x 480, 360 x 240, 180 x 120 (NTSC)

Resolution 720 x 576, 360 x 288, 180 x 144 (PAL)

30 FPS (NTSC) for each channel

Frame Rate
25 FPS (PAL) for each channel

DivX, Microsoft WMV, Sigma Design MPEG4, H.263

Output Format MPEG-2 MP @ ML
MPEG-1

Programmable GOP structures of I, IP, IBP, IBBP

Dynamically adjustable bit rate and frame rate to
Compression
fit variable bandwidths (for Internet communication
applications)

mage Processing Hardware control of brightness, contrast and saturation.

DVD quality full D1 video at 3 ~ 16 Mbps,

Video High quality CIF video at 384Kbps
Performance High quality QCIF video at 96Kbps
High quality Full DI video at 1Mbps

Software Support:
Ordering Information
Provide driver for Window 2000 and Windows XP
Device Driver
systems IVC-4200
4-Channel MPEG-4 Video Capture Card
Provide Window 2000, XP SDK with demo program for
SDK
software application development.

w w w. i e i w o r l d . c o m 1-102
 IVC-120G 16 -Channel Video Capture Card with GPIO module

IVC-120G
The�most�cost-saving�frame�grabber

IVC-120G is an improved model of IVC-100G. With 4 multiplexers, IVC-120G can solve the problem of frame shaking upwards & down
-wards. It also provides a lot amounts of video input channels ( 16 channels ).

Relays for
IVC-120G only
GPIO Daughter Side
Features: Board View

Pain-free extension for multi-card system: 120.19 mm

When starting out with a DVR system, it can be surprising just what level
of growth your surveillance system will reach. By choosing the IVC-120G,
you can expand you surveillance area with no extra reconfiguration
of your DVR system. As long as you have a free expansion slot for
accommodating new cards, you can easily add more “eyes” watching
wherever you most need them.

100 mm
Smart ID number for easy system maintenance:
With an LED attached to each IVC-120G, you can assign a unique
number to each card in you DVR system with which to associate the
surveillance area. Should something go wrong in a specific area, you can
easily check out the system and replace it with a new card.

General Purpose Input Out (GPIO) (Optional)

The GPIO connector allows users to connect external I/O devices such
as a sensor, light, alarm, switch, etc.... for any kind of external control that
may be required.

GPIO Application
For example, you can control the spotlight over a doorway at nighttime via
the GPIO connection whenever the motion detector has been triggered.
Then you don’t have to worry about the recording quality when someone
intrude the surveillance area at night time.

GPIO Application Please note that IVC-120

do not have GPIO module
Spotlight
and have no relay on board
Camera
Sensor Shoting

IN
Elevator
Door Way
Technical Specification - IVC-120G
G Hardware – PAL (720x576, 704x576,
P Function 640x576,352x288, 320x288,
I IVC-120G
O – PCI Single Universal Board 176x144)
OUT CH1
– Plug and Play, 16 channel Capture Frame Rate - Max 30
video capture card FPS for 16 channels
Analog Video Capture Engine Support Video Loss Detection
– Conexant FusionTM 878A Multi-screen support
Output Connector – NTSC/ PAL/ SECAM Video
Output Flat Support resolution adjustment
Device x 4 Cable Decoding
Input/Output Interface Support image brightness,
contrast,and saturation adjustment
Video Input : pin connector for 16
channels BNC Connector LED for card ID configuration and
identification
Video Output : One channel Video
Output selected from the driver Software Support
GPIO: 4 inputs and 4 outputs (use Provide WDM driver and SDK for
CT-800 GPIO daughter board) developer
Functionality Support Supporting OS
Input IVC-120G Window 98 SE, ME, 2000, XP
Multiple Video Resolution
Device x 4 Main Board Others
Input GPIO Daughter – NTSC (720x480, 704x480,
Connector Board GPIO Diagram 640x480, 352x240, 320x240, Power Consumption: 3.5W@5V
176x112) Operating Temperature: 0~ 50ºC
Board Size: 120.19mm x 100mm

The connection points of each output device are common, normal

open (NO), normal closed (NC).
The connection points of each input device are input voltage and ground.

1-103 w w w. i e i w o r l d . c o m
 IVC-100G 4-Channel Video Capture Card with GPIO Module

Single
IVC-100G Board
Fullfill your basic need for surveillance Computer
By adopting IVC-100G, you can save your money for baseline quality Relays for
IVC-100G only PIAGP Series
of surveillance video about 30 frames per second maximally shared by
PICMG
four channels. GPIO Daughter Side
View Half-Size
Board
Industrial
120.19 mm Motherboard

Features: 5.25” NOVA

EPIC NANO
Pain-free extension for multi-card system: 3.5” WAFER
When starting out with a DVR system, it can be surprising just what
ETX
level of growth your surveillance system will reach. By choosing
the IVC-100G, you can expand your surveillance area with no extra PC/104

100 mm
reconfiguration of your DVR system. As long as you have a free Add-on Card
expansion slotfor accommodating new cards, you can easily add more IVC Card
“eyes” watching wherever you most need them. Backplane
Smart ID number for easy system maintenance:
With an LED attached to each IVC-100G, you can assign a unique
number to each card in your DVR system with which to associate the LCD
surveillance area. Should something go wrong in a specific area, you Product
can easily check out the system and replace it with a new card. Series
Linux Application Development Support
By offering system integrators a Linux driver and SDK, IEI has Please note that IVC-100 do not have
established a foundation for customers to develop competitive GPIO module and have no relay on board Chassis
applications both quickly and cost-effectively.
Linux driver for Red Hat 7.2, 7.3, 8.0
General Purpose Input Output (GPIO):(Optional)
The GPIO connector allows users to connect external I/O devices
such as a sensor, light, alarm, switch, etc...for any kind of external
control that may be required.
Technical Specification - IVC-100G Power
supply
Hardware
GPIO Application
For example, you can control the spotlight over a doorway at nighttime Function Support Video Loss Detection
via the GPIO connection whenever the motion detector has been – PCI Single Universal Board Multi-screen support
– Plug and Play, 4 channel video Peripheral
triggered. Then you don’t have to worry about the recording quality Support resolution adjustment
when someone intrude the surveillance area at night time. capture card
Analog Video Capture Engine Support image brightness,
– Conexant FusionTM 878A x 1 contrast,and saturation adjustment
– NTSC/PAL/SECAM Video Decoding LED for card ID configuration and
GPIO Application Input/Output Interface identification
Video Inputs x4 BNC Connector Software Support
Spotlight
GPIO Module 4 inputs & 4 outputs Provide WDM driver and SDK for
developer
Sensor
Camera Functionality Support
Shoting Supporting OS
Multiple Video Resolutions
– NTSC: 720x480, 704x480, Window 98 SE, ME, 2000, XP,
IN Linux
Elevator 640x480, 352x240, 320x240,
Door Way 176x112 Others
G – PAL: 720x576, 704x576, 640x576, Power Consumption: 3.5W@5V
P 352x288, 320x288, 176x144 Operating Temperature: 0~ 50ºC
I IVC-100
IVC-120G
O Capture Frame Rate Board Size: 120.19mm x 100mm
OUT CH1
- Max 30 FPS for 4 channels

GPIO Module (Optional) Relay Contact Rating 1 FORM C

General Items (SPDT)
Output Connector – 4 relay on IVC-100G PCI board
Output Flat
Device x 4 – A GPIO daughter board Contact Capacity Coil = 0.36W
Cable
– An GPIO output connector Resistive Load (cos∂ =1) 1A/125VAC;
(12 pin-out male connector) Inductive Load 2A/24VDC
– An GPIO input connector (cos∂ =0.4, L/R= 7ms) 0.3A/30VDC
(8 pin-out male connector)
Rate Carrying Current 2A
General Input Specification
– Input 5VDC Max. allowable voltage AC 120V;
Logic 0: 0.5V Max DC 60V
Logic 1: 4.5V Min
Max. allowable current 2A
– Input 12VDC
Input IVC-100
IVC-120G Logic 0: 0.5V Max Max. allowable power 48W
Device x 4 Main Board Logic 1: 11V Min
Input GPIO Daughter
Contact Material Ag Alloy
Connector Board GPIO Diagram Relay Coil Specification (At 20ºC)
Relay Contact Rating

The connection points of each output device are common, normal Coil Voltage Normal Voltage Normal Coil Resistance
open (NO), normal closed (NC). (VDC) Current (mA) (ohm 10%)
The connection points of each input device are input voltage and ground.
5V 5V 66.7 75
Power Pull-in Drop-out Voltage Max Allowable
Consumption (W) Voltage (VDC) (VDC) Voltage (VDC)
About 0.36W 75% max 3.75V 10% min 0.5V 110% 5.5V

w w w. i e i w o r l d . c o m 1-104
 IVC-200G High-end 4-Channel Video Capture Card with
GPIO Module

IVC-200G
Bring you real time monitoring of surveillance.

GPIO Daughter Relays for Side

With IVC-200G, you can build up your digital surveillance system Board IVC-200G only View
with the real-time monitoring experience and quality of video. Having 120.19 mm
four Conexant 878 chips on board, IVC-200G supports a good quality
of video up to 30 frames per second for each individual channel.
With this quality of video, you don’t have to worry about missing any

important snapshot happening anytime.

Features:

100 mm
Pain-free extension for multi-card system:
When starting out with a DVR system, it can be surprising just what
level of growth your surveillance system will reach. By choosing
the IVC-200G, you can expand your surveillance area with no extra
reconfiguration of your DVR system. As long as you have a free
expansion slot for accommodating new cards, you can easily add
more “eyes” watching wherever you most need them.
Smart ID number for easy system maintenance:
With an LED attached to each IVC-200G, you can assign a unique
number to each card in your DVR system with which to associate the Please note that IVC-200 do not have
surveillance area. Should something go wrong in a specific area, you
can easily check out the system and replace it with a new card. GPIO module and have no relay on board
Linux Application Development Support Linux driver for Red Hat 7.2, 7.3, 8.0
By offering system integrators a Linux driver and SDK, IEI has
established a foundation for customers to develop competitive Technical Specification - IVC-200G
applications both quickly and cost-effectively. Hardware
General Purpose Input Output (GPIO):(Optional) Function Support Video Loss Detection
The GPIO connector allows users to connect external I/O devices – PCI Single Universal Board Multi-screen support
such as a sensor, light, alarm, switch, etc...for any kind of external – Plug and Play, 4 channel video
control that may be required. capture card Support resolution adjustment
GPIO Application Analog Video Capture Engine Support image brightness,
For example, you can control the spotlight over a doorway at nighttime – Conexant FusionTM 878A x 4 contrast,and saturation adjustment
via the GPIO connection whenever the motion detector has been – NTSC/PAL/SECAM Video Decoding LED for card ID configuration and
triggered. Then you don’t have to worry about the recording quality Input/Output Interface identification
when someone intrude the surveillance area at night time. Software Support
Video Inputs x4 BNC Connector
Watch Dog Timing GPIO Module 4 inputs & 4 outputs Provide WDM driver and SDK for
developer
Functionality Support
Supporting OS
Multiple Video Resolutions
– NTSC: 720x480, 704x480, Window 98 SE, ME, 2000, XP,
640x480, 352x240, 320x240, Linux
176x112 Others
– PAL: 720x576, 704x576, 640x576, Power Consumption: 3.5W@5V
352x288, 320x288, 176x144 Operating Temperature: 0~ 50ºC
Capture Frame Rate Board Size: 120.19mm x 100mm
- Max 120 FPS for 4 channels

IVC-200 GPIO Module (Optional) Relay Contact Rating 1 FORM C

General Items (SPDT)
– 4 relay on IVC-100G PCI board
– A GPIO daughter board Contact Capacity Coil = 0.36W
– An GPIO output connector Resistive Load (cos∂ =1) 1A/125VAC;
(12 pin-out male connector) Inductive Load 2A/24VDC
– An GPIO input connector (cos∂ =0.4, L/R= 7ms) 0.3A/30VDC
(8 pin-out male connector)
Rate Carrying Current 2A
General Input Specification
– Input 5VDC Max. allowable voltage AC 120V;
Logic 0: 0.5V Max DC 60V
Logic 1: 4.5V Min
Max. allowable current 2A
– Input 12VDC
Logic 0: 0.5V Max Max. allowable power 48W
Logic 1: 11V Min
Contact Material Ag Alloy
Relay Coil Specification (At 20ºC)
Relay Contact Rating

Coil Voltage Normal Voltage Normal Coil Resistance

(VDC) Current (mA) (ohm 10%)
The connection points of each output device are common, normal
open (NO), normal closed (NC). 5V 5V 66.7 75
The connection points of each input device are input voltage and ground.
Power Pull-in Drop-out Voltage Max Allowable
Consumption (W) Voltage (VDC) (VDC) Voltage (VDC)
About 0.36W 75% max 3.75V 10% min 0.5V 110% 5.5V

1-105 w w w. i e i w o r l d . c o m
 PCI Bus Routing Table of IEI’s Backplanes
Single
Board
The following table dispalys IEI’s Backplane resource usage for PCI.Please note that Yes stands for this PCI is reserved Computer
for CPU card, No means this PCI is un-useable. The number represents slots expended through PCI Bridge. PIAGP Series
PICMG
Backplane PCI 1 PCI 2 PCI 3 PCI 4 Half-Size
PCI-2SD No Yes No No Industrial
Motherboard
PCI- 4S Yes Yes Yes No 5.25” NOVA
EPIC NANO
PCI- 4SD No Yes Yes No 3.5” WAFER
PCI- 4SD2 No Yes Yes Yes ETX
PC/104
PCI-5S Yes Yes Yes No Add-on Card
PCI-5S2 Yes Yes Yes Yes IVC Card
Backplane
PCI-5S3 No Yes Yes Yes

PCI-5SD3 Yes Yes No No LCD

Product
PCI-5SD5-R2 Yes Yes Yes Yes
Series
PCI-5SD6 Yes Yes Yes Yes

PCI-6S Yes Yes Yes Yes

Chassis
PCI-6S2 Yes Yes Yes No

PCI-6SR Yes Yes No No

Power
PCI-6SD No Yes Yes No supply

PCI-7S Yes Yes Yes Yes

PCI-7S2 Yes Yes Yes Yes Peripheral

PCI-8S Yes Yes Yes Yes

PCI-10S Yes Yes Yes Yes

PCI-10S2 Yes Yes Yes Yes

PCI-12S Yes Yes Yes Yes

PCI-13SD Segment 1/2 Segment 1/2 Segment 1/2 Segment 1/2

PCI-14S Yes Yes Yes Yes

PCI-14S2 Yes Yes Yes Yes

PCI-14S3 Yes Yes Yes Yes

PCI-17SQ Segment 1/2/3/4 Segment 1/2/3/4 Segment 4 No

PCI-18SD Segment 1/2 Segment 1/2 Segment 1/2 Segment 1/2

PCI-18SQ Segment 1/2/3/4 Segment 1/2/3/4 Segment 1/2/3/4 No

PCI-19S Yes Segment 1/2/3/4 Yes Yes

PX-6SDA No Yes 3-1, 3-2, 3-3, 3- 4 No

PX-8S Yes Yes 3-1, 3-2, 3-3, 3- 4 No

PX-10S Yes Yes 3-1, 3-2, 3-3, 3- 4 Yes

PX-14S Yes Yes 3-1, 3-2, 3-3, 3- 4 Yes

PX-14S1 No Yes 3-1, 3-2, 3-3, 3- 4, 3-5, 3-6 No

PX-14S2 Yes Yes 3-1, 3-2, 3-3, 3- 4 Yes

3-1, 3-2, 3-3, 3- 4, 3-5, 3-6, 3-
PX-14S3 Yes Yes Yes
7, 3-8, 3-9
PX-14S5 No Yes 3-1, 3-2, 3-3, 3- 4, 3-5, 3-6 No

PX-19S Yes 2-1, 2-2, 2-3, 2- 4 3-1, 3-2, 3-3, 3- 4 No

PX-20S Yes 2-1, 2-2, 2-3, 2- 4 3-1, 3-2, 3-3, 3- 4, 3-5 Yes

PX-20S2 1-1, 1-2, 1-3, 1- 4 2-1, 2-2, 2-3, 2- 4, 2-5, 3-1, 3-2, 3-3, 3- 4 4-1, 4-2, 4-3, 4- 4, 4-5
3-1, 3-2, 3-3, 3- 4, 3-5,3-6,
PX-20S3 Yes 2-6, 2-7, 2-8 Yes
3-7, 3-8
IPX-9S Yes Yes 3-1, 3-2, 3-3, 3- 4, 3-5 Yes

IPX-13S Yes Yes 3-1, 3-2, 3-3, 3- 4, 3-5 Yes

w w w. i e i w o r l d . c o m 1-106
 2U Chassis Backplane

1-107 w w w. i e i w o r l d . c o m
2U Chassis Backplane With Each Model
Single
RACK-200 RACK-210 RACK-220 RACK-2000 EC-1020 Board
BP-5SD Yes Yes Yes Yes Yes Computer

IP-5SD3 Yes Yes Yes Yes Yes PIAGP Series

IP-5SD5 Yes Yes Yes Yes Yes PICMG

Half-Size
PX-6SDA No No No Yes Yes Industrial
Motherboard
PCI-5SD3 Yes Yes Yes No No 5.25” NOVA

Yes EPIC NANO

PCI-5SD5-R2 Yes Yes Yes Yes
3.5” WAFER
PCI-5SD6 Yes Yes Yes No No ETX
No PC/104
PCI-6SR Yes Yes Yes No
Add-on Card
PCI-6SD No No No Yes Yes IVC Card

PCI-6SDA No No No Yes Yes Backplane

PCI-5SDA No No No Yes Yes

LCD
Product
���� ������ Series
� � � �� � �

LEFT SIDE RIGHT SIDE Chassis

Power
supply

Peripheral
� � � �� � �
RIGHT SIDE
LEFT SIDE

RIGHT VIEW

� � �� � �

RIGHT SIDE LEFT VIEW

LEFT SIDE

RIGHT VIEW
� � �� � � �
LEFT VIEW
LEFT SIDE RIGHT SIDE

RIGHT VIEW
� � �� � � �

LEFT SIDE RIGHT SIDE

RIGHT VIEW

w w w. i e i w o r l d . c o m 1-108
 PCI-64 64-bit PCI Backplane
IEI Support
We provide various backplane configurations for communications applications, from our 2x 64bit PCI slot backplane
to our 20x 64bit PCI slot backplane are made for rackmount chassis, industrial compact chassis, and workstation
appliances. Our PCI 64bit backplane product line meets all PCI 64bit application requirements.

1-109 w w w. i e i w o r l d . c o m
 PCI-64 64-bit PCI Backplane
Single
Board
Computer

Why do you need PCI 64bit Backplane? PIAGP Series

PICMG
The convergence of voice, video and data traffic, the need for secure communications and the exploding demand for
Half-Size
high-speed network access are placing communication infrastructure vendors under extreme demand for faster, well-
Industrial
managed bandwidth capable of integrating with their existing technology. ICP’s PCI-64bit Backplane enables user to Motherboard
build standard-based network equipment, scalable to multi-Gigahertz speed ad beyond and also integrates easily and 5.25” NOVA
effectively with existing infrastructure. EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Power
supply

Peripheral

64-bit�PCI�Backplane Chassis�Support
PCI64-2SD RACK-2300�/�RACK-2320�/�RACK-2330�
PCI64-4S RACK-3300
PCI64-5S RACK-504�/�PAC-1060A�/�PAC-1000
PCI64-5SD RACK-2004
PCI64-7S PAC-1700
PCI64-8S PAC-1200
PCI64-10S PAC-1200�/�WS-855A
PCI64-14S RACK-3000�/�RACK-3100
PX64-14S2 RACK-814�/�MPC-6022A�/�MPC-6010A�/�EC-1040�/�RACK-305A�/�RACK-360

w w w. i e i w o r l d . c o m 1-110
 PICMG Bus Passive Backplane

1-111 w w w. i e i w o r l d . c o m
PICMG Bus Passive Backplane
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Power
supply

Peripheral

w w w. i e i w o r l d . c o m 1-112
 PICMG Bus Passive Backplane

1-113 w w w. i e i w o r l d . c o m
PICMG Bridged Backplane
Single
Board
Computer

PCISA Backplane PIAGP Series

PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Power
supply

Peripheral

w w w. i e i w o r l d . c o m 1-114
 PCISA Backplane

(For PAC-400 chassis)

1-115 w w w. i e i w o r l d . c o m
PCISA Backplane
Single
Board
Computer

PIAGP Series
PICMG
Half-Size
Industrial
Motherboard
5.25” NOVA
EPIC NANO
3.5” WAFER
ETX
PC/104
Add-on Card
IVC Card
Backplane

LCD
Product
Series

Chassis

Power
supply

Peripheral

w w w. i e i w o r l d . c o m 1-116
 PCISA Backplane

ISA Backplane

1-117 w w w. i e i w o r l d . c o m
 POS-380 POS Board, Socket 370 133MHz FSB with LCD/
CRT VGA, LAN, USB 2.0, 6 COM & Audio

New Generation of POS Solution!!

Ethernet

K/M

USB 2.0

COM
LPT
VGA

DDr266
Universal AUTO tin
Tuala por ts
Dual lay
Realtek 5.1-channel 6 COM Disp
Socket-370
S up

Feature
Intel PIII / Tualatin / Celeron CPU support upto FSB 133 MHz What benefits of POS-380
CRT/LCD integrated in VIA CLE266 support 24-bit TTL/LVDS, IEI’s new generation of POS (Point of Sales) series product line in
support dual independent display POS-380 is designed by VIA CLE266 solution within multi-function,
2x DDR 266 support up to 2GB low power consumption and cost effective features. It is design with
support 1x PCI expansion slot universal Socket-370 CPU form factor to support most of VIA C3,
CFII, LAN, USB2.0, 6 COM ports, Audio integrated Intel® Celeron™ and Pentium® III series CPU type. In the POS series
market, usually, it has multi peripheral communication requirements

Specifications such as, Scanner, Card reader and Goods perceptron. To be able
to meet the next generation demand of POS market, iEi’s POS-380
Socket-370 base supports up VIA C3, Intel® Tualutin Pentium® had been concerned the future requirements and design in totally six
CPU
III/Celeron™ up to 133MHz FSB serial communication ports within USB2.0 and IEEE-1394 high speed
System chipset VIA CLE266 (VT8623+8235) transmission interface. It is capable to enhance the support ability
System memory 2 x DDR 200/266 SDRAM socket support up to 2GB in the near future and focused on popular peripheral applications.
Integrated in VT8623 Moreover, following with the new demand on data displaying, POS-
– Resolution: 1920x1440 for CRT display with DB15 and 2x5 380 has also implemented DVI and TV-Out functions to be able to
VGA Display box header support various display type. On the other hand, the most new hard
– DF 14-20F connector for Supports single channel 24-bit TTL / disk transmission interface Serial-ATA can be increase the storage
LVDS LCD interface, support dual independent display
performance by sending the data through out optional GbE LAN to
SSD 1 x Compact Flash™ Type II socket
remote server.
Ethernet – 1 x 10/100Mbps Realtek 8100BL Ethernet Controller
(POS-380R)
Audio AC’97 Codec (Realtek 5.1-channel) Dimensions
– 5 x RS-232 (3 by pin header)
– 1 x RS-232/422/485 selectable
– 1 x LPT supports SPP/EPP/ECP mode
– 6 x USB 2.0 (2 x USB connectors, others by 2 x 4 pin-header)
I/O
– 1 x PS/2 for Keyboard/Mouse
– 2 x IDE ATA 66/100/133 (40-pin with 2.54mm pitch)
– 1 x Floppy (34-pin with 2.54mm pitch)
– 1 x IrDA
Digital I/O TTL Level, 4 x inputs and 4 x outputs
Extension Slot 1 x 32-bit PCI slot
WDT Software programmable supports 1 ~ 255 sec, system reset
Hardware Provides CPU Vcore, Vcc, CPU/ System fan speed and
Monitor temperature detecting function
Power [email protected], [email protected] (STR), [email protected], [email protected]
Consumption (PIII 1GHz , 133MHz FSB 256MB DDR266)
Power
AT & ATX
Connector
Operation
Temperature
0~60°C
Ordering Information
Relative
5~95%, non-condensing
Humidity POS-380R
IEI Option POS Board, Socket 370 133MHz FSB with LCD/ CRT VGA, LAN,
USB 2.0, 6 COM & Audio
Note:
FP24-02-V10: 3.3V Buffered LCD connection board For TV-out / IEEE-1394a / Serial-ATA / Intel LAN supporting demand,
CF-504: Socket-370 CPU Cooler please contact supplier.
page 5-5

1-55 w w w. i e i w o r l d . c o m